Dmesg

dmesg (text/plain), 29.43 KB, created by Kevin on 2009-01-07 01:58:05 UTC

Linux version 2.6.27-gentoo-r7 (root@mikkevin) (gcc version 4.3.2 (Gentoo 4.3.2 p1.2, pie-10.1.2) ) #1 SMP PREEMPT Sun Dec 28 11:48:40 MST 2008
Command line: root=/dev/hda5 splash=silent showopts vga=893 mem=8g
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
 BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
 BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
 BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009b800 (usable)
 user: 000000000009b800 - 00000000000a0000 (reserved)
 user: 00000000000f0000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 00000000bfef0000 (usable)
 user: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
 user: 00000000bfef3000 - 00000000bff00000 (ACPI data)
 user: 00000000e0000000 - 00000000f0000000 (reserved)
 user: 00000000fec00000 - 0000000100000000 (reserved)
 user: 0000000100000000 - 0000000140000000 (usable)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbfef0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bfef0000 page 4k
kernel direct mapping tables up to bfef0000 @ 10000-15000
last_map_addr: bfef0000 end: bfef0000
init_memory_mapping
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 13000-19000
last_map_addr: 140000000 end: 140000000
RAMDISK: 37f63000 - 37fef46d
ACPI: RSDP 000F7FA0, 0014 (r0 Nvidia)
ACPI: RSDT BFEF3040, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
ACPI: FACP BFEF30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
ACPI: DSDT BFEF3180, 5411 (r1 NVIDIA NVDAACPI     1000 MSFT  3000000)
ACPI: FACS BFEF0000, 0040
ACPI: HPET BFEF8700, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA       98)
ACPI: WDRT BFEF8780, 0047 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
ACPI: MCFG BFEF8840, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
ACPI: APIC BFEF8600, 0098 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
ACPI: OEMN BFEF88C0, 4AED (r1 NVIDIA NTUNEOEM 20302E31 NVDA        0)
(7 early reservations) ==> bootmem [0000000000 - 0140000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 000055a8f8]    TEXT DATA BSS ==> [0000200000 - 000055a8f8]
  #3 [0037f63000 - 0037fef46d]          RAMDISK ==> [0037f63000 - 0037fef46d]
  #4 [000009b800 - 0000100000]    BIOS reserved ==> [000009b800 - 0000100000]
  #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
  #6 [0000013000 - 0000014000]          PGTABLE ==> [0000013000 - 0000014000]
 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000bfef0
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048187
  DMA zone: 2958 pages, LIFO batch:0
  DMA32 zone: 767784 pages, LIFO batch:31
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfef0000 - 00000000bfef3000
PM: Registered nosave memory: 00000000bfef3000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: bff00000:20100000)
PERCPU: Allocating 46788 bytes of per cpu data
NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029302
Kernel command line: root=/dev/hda5 splash=silent showopts vga=893 mem=8g
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 4068.922 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4043672k/5242880k available (2137k kernel code, 148184k reserved, 663k data, 264k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 8137.84 BogoMIPS (lpj=4068922)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
Using local APIC timer interrupts.
APIC timer calibration result 29918528
Detected 29.918 MHz APIC timer.
Booting processor 1/3 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 8137.78 BogoMIPS (lpj=4068893)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU1: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/1 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 8137.74 BogoMIPS (lpj=4068874)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/2 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 8137.77 BogoMIPS (lpj=4068885)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU3: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (32551.14 BogoMIPS).
net_namespace: 1464 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: BIOS _OSI(Linux) query ignored
ACPI: If "acpi_osi=Linux" works better, please notify [e-mail]
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
PCI: 0000:00:0a.0 reg 10 io port: [fc00, fc7f]
PCI: 0000:00:0a.1 reg 10 io port: [f800, f83f]
PCI: 0000:00:0a.1 reg 20 io port: [f400, f43f]
PCI: 0000:00:0a.1 reg 24 io port: [f000, f03f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
PCI: 0000:00:0b.0 reg 10 32bit mmio: [dffff000, dfffffff]
pci 0000:00:0b.0: supports D1
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
PCI: 0000:00:0b.1 reg 10 32bit mmio: [dfffe000, dfffe0ff]
pci 0000:00:0b.1: supports D1
pci 0000:00:0b.1: supports D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
PCI: 0000:00:0d.0 reg 20 io port: [ec00, ec0f]
PCI: 0000:00:0e.0 reg 10 io port: [9f0, 9f7]
PCI: 0000:00:0e.0 reg 14 io port: [bf0, bf3]
PCI: 0000:00:0e.0 reg 18 io port: [970, 977]
PCI: 0000:00:0e.0 reg 1c io port: [b70, b73]
PCI: 0000:00:0e.0 reg 20 io port: [d800, d80f]
PCI: 0000:00:0e.0 reg 24 32bit mmio: [dfffd000, dfffdfff]
PCI: 0000:00:0e.1 reg 10 io port: [9e0, 9e7]
PCI: 0000:00:0e.1 reg 14 io port: [be0, be3]
PCI: 0000:00:0e.1 reg 18 io port: [960, 967]
PCI: 0000:00:0e.1 reg 1c io port: [b60, b63]
PCI: 0000:00:0e.1 reg 20 io port: [c400, c40f]
PCI: 0000:00:0e.1 reg 24 32bit mmio: [dfffc000, dfffcfff]
PCI: 0000:00:0e.2 reg 10 io port: [c000, c007]
PCI: 0000:00:0e.2 reg 14 io port: [bc00, bc03]
PCI: 0000:00:0e.2 reg 18 io port: [b800, b807]
PCI: 0000:00:0e.2 reg 1c io port: [b400, b403]
PCI: 0000:00:0e.2 reg 20 io port: [b000, b00f]
PCI: 0000:00:0e.2 reg 24 32bit mmio: [dfffb000, dfffbfff]
PCI: 0000:00:0f.1 reg 10 32bit mmio: [dfff0000, dfff3fff]
pci 0000:00:0f.1: PME# supported from D3hot D3cold
pci 0000:00:0f.1: PME# disabled
PCI: 0000:00:11.0 reg 10 32bit mmio: [dfffa000, dfffafff]
PCI: 0000:00:11.0 reg 14 io port: [ac00, ac07]
PCI: 0000:00:11.0 reg 18 32bit mmio: [dfff9000, dfff90ff]
PCI: 0000:00:11.0 reg 1c 32bit mmio: [dfff8000, dfff800f]
pci 0000:00:11.0: supports D1
pci 0000:00:11.0: supports D2
pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: PME# disabled
PCI: 0000:00:12.0 reg 10 32bit mmio: [dfff7000, dfff7fff]
PCI: 0000:00:12.0 reg 14 io port: [a800, a807]
PCI: 0000:00:12.0 reg 18 32bit mmio: [dfff6000, dfff60ff]
PCI: 0000:00:12.0 reg 1c 32bit mmio: [dfff5000, dfff500f]
pci 0000:00:12.0: supports D1
pci 0000:00:12.0: supports D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [dc000000, dcffffff]
PCI: 0000:01:00.0 reg 14 64bit mmio: [c0000000, cfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [da000000, dbffffff]
PCI: 0000:01:00.0 reg 24 io port: [9c00, 9c7f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 7ffff]
PCI: bridge 0000:00:02.0 io port: [9000, 9fff]
PCI: bridge 0000:00:02.0 32bit mmio: [da000000, ddffffff]
PCI: bridge 0000:00:02.0 64bit mmio pref: [c0000000, cfffffff]
pci 0000:00:0f.0: transparent bridge
PCI: 0000:04:00.0 reg 24 32bit mmio: [dfefe000, dfefffff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
PCI: 0000:04:00.1 reg 10 io port: [8c00, 8c07]
PCI: 0000:04:00.1 reg 14 io port: [8800, 8803]
PCI: 0000:04:00.1 reg 18 io port: [8400, 8407]
PCI: 0000:04:00.1 reg 1c io port: [8000, 8003]
PCI: 0000:04:00.1 reg 20 io port: [7c00, 7c0f]
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:15.0. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:15.0 io port: [7000, 8fff]
PCI: bridge 0000:00:15.0 32bit mmio: [dfe00000, dfefffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0
ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0
ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0
ACPI: PCI Interrupt Link [AUBA] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AMA1] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AMAC] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AACI] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AMCI] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [ASMB] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AUS2] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AIDE] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
system 00:00: ioport range 0x1000-0x107f has been reserved
system 00:00: ioport range 0x1080-0x10ff has been reserved
system 00:00: ioport range 0x1400-0x147f has been reserved
system 00:00: ioport range 0x1480-0x14ff has been reserved
system 00:00: ioport range 0x1800-0x187f has been reserved
system 00:00: ioport range 0x1880-0x18ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x295-0x314 has been reserved
system 00:02: ioport range 0x880-0x88f has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0a: iomem range 0xd0000-0xd3fff has been reserved
system 00:0a: iomem range 0xd9000-0xdbfff has been reserved
system 00:0a: iomem range 0xf0000-0xfbfff could not be reserved
system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
system 00:0a: iomem range 0xbfef0000-0xbfefffff could not be reserved
system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0a: iomem range 0x0-0x9ffff could not be reserved
system 00:0a: iomem range 0x100000-0xbfeeffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0a: iomem range 0xfeff0000-0xfeff0000 could not be reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0:   IO window: 0x9000-0x9fff
pci 0000:00:02.0:   MEM window: 0xda000000-0xddffffff
pci 0000:00:02.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0:   IO window: disabled
pci 0000:00:04.0:   MEM window: disabled
pci 0000:00:04.0:   PREFETCH window: disabled
pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0f.0:   IO window: disabled
pci 0000:00:0f.0:   MEM window: disabled
pci 0000:00:0f.0:   PREFETCH window: disabled
pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
pci 0000:00:15.0:   IO window: 0x7000-0x8fff
pci 0000:00:15.0:   MEM window: 0xdfe00000-0xdfefffff
pci 0000:00:15.0:   PREFETCH window: disabled
ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16
pci 0000:00:02.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AXV6] enabled at IRQ 16
pci 0000:00:04.0: PCI INT A -> Link[AXV6] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:00:15.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [9000, 9fff]
bus: 01 index 1 mmio: [da000000, ddffffff]
bus: 01 index 2 mmio: [c0000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [0, 0]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [0, 0]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 io port: [0, ffff]
bus: 03 index 4 mmio: [0, ffffffffffffffff]
bus: 04 index 0 io port: [7000, 8fff]
bus: 04 index 1 mmio: [dfe00000, dfefffff]
bus: 04 index 2 mmio: [0, 0]
bus: 04 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 561k freed
msgmni has been set to 7900
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Disabling HT MSI mapping<6>pci 0000:00:04.0: Disabling HT MSI mapping<6>pci 0000:00:09.0: Disabling HT MSI mapping<6>pci 0000:00:0e.0: Disabling HT MSI mapping<6>pci 0000:00:0e.1: Disabling HT MSI mapping<6>pci 0000:00:0e.2: Disabling HT MSI mapping<6>pci 0000:00:0f.0: Disabling HT MSI mapping<6>pci 0000:00:0f.1: Disabling HT MSI mapping<6>pci 0000:00:11.0: Disabling HT MSI mapping<6>pci 0000:00:12.0: Disabling HT MSI mapping<6>pci 0000:00:15.0: Disabling HT MSI mapping<7>pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pci_express 0000:00:04.0:pcie00: allocate port service
pcieport-driver 0000:00:15.0: setting latency timer to 64
pcieport-driver 0000:00:15.0: found MSI capability
pci_express 0000:00:15.0:pcie00: allocate port service
pci_express 0000:00:15.0:pcie03: allocate port service
Linux agpgart interface v0.103
vesafb: framebuffer at 0xdb000000, mapped to 0xffffc20010100000, using 14336k, total 14336k
vesafb: mode is 1920x1200x32, linelength=7680, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 264k freed
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
hda: Maxtor 6B300R0, ATA DISK drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63
hda: cache flushes supported
 hda: hda1 hda3 hda4 < hda5 hda6 hda7 >
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8125, journal first block 66, max trans len 256, max batch 225, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
Real Time Clock Driver v1.12ac
No dock devices found.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf400
i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf000
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor ACPI0007:01: registered as cooling_device1
processor ACPI0007:02: registered as cooling_device2
processor ACPI0007:03: registered as cooling_device3
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xdffff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 22
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[AUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xdfffe000
usb 1-1: new full speed USB device using ohci_hcd and address 2
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 1
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 23
forcedeth 0000:00:11.0: PCI INT A -> Link[AMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:11.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
SCSI subsystem initialized
usb 2-1: new high speed USB device using ehci_hcd and address 2
libata version 3.00 loaded.
usb 2-1: configuration #1 chosen from 1 choice
forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:04:4b:17:6e:69
forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 22
forcedeth 0000:00:12.0: PCI INT A -> Link[AMA1] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:12.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
usb 2-5: new high speed USB device using ehci_hcd and address 4
usb 2-5: configuration #1 chosen from 1 choice
usb 1-3: new low speed USB device using ohci_hcd and address 3
forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x50ef @ 1, addr 00:04:4b:17:6e:68
forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
HDA Intel 0000:00:0f.1: setting latency timer to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 21
sata_nv 0000:00:0e.0: PCI INT A -> Link[ASA0] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
usb 1-3: configuration #1 chosen from 1 choice
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
scsi3 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input3
input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-3
Fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /class/input/input4
input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-3
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:0e.1: Using SWNCQ mode
sata_nv 0000:00:0e.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.2: Using SWNCQ mode
sata_nv 0000:00:0e.2: setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb000 irq 21
ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 21
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.11.02  Fri Dec  5 12:41:09 PST 2008
usb-storage: device scan complete
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access              Patriot Memory   PMAP PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 15663104 512-byte hardware sectors (8020 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 15663104 512-byte hardware sectors (8020 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-E60L 1.00 PQ: 0 ANSI: 0
scsi 3:0:0:0: Attached scsi generic sg2 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 94x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present