build.log

build.log (text/plain), 31.23 KB, created by Caleb Cushing on 2009-01-02 10:39:58 UTC

>>> Unpacking source...
>>> Unpacking perl-5.10.0.tar.gz to /var/tmp/portage/dev-lang/perl-5.10.0/work
 [32;01m*[0m Applying various patches (bugfixes/updates) ...
 [32;01m*[0m   900_all_prelink-lpthread.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   901_all_create-libperl-soname.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   902_all_5.8.8-reorder-INC.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   903_all_picdl.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   904_all_noksh.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   906_all_5.8.7-MakeMaker-RUNPATH.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   907_all_regexp-nossp.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   908_all_hppa-pa7200-configure.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   912_all_5.8.8-USE_MM_LD_RUN_PATH.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   922_all_CVE-2008-2827.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   923_all_cleanup-paths.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   924_all_usr-local.patch ...
[A[72C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Done with patching
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0 ...
Configure: use '-U symbol=', not '-D symbol='.
Configure: ignoring -D inc_version_list=
Configure: use '-U symbol=', not '-D symbol='.
Configure: ignoring -D inc_version_list=
First let's make sure your kit is complete.  Checking...
Locating common programs...
Checking compatibility between /bin/echo and builtin echo (if any)...
Symbolic links are supported.
Checking how to test for symbolic links...
You can test for symbolic links with 'test -h'.
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.
3b1   	      dos_djgpp       irix_6_0        nonstopux     sunos_4_0   
aix   	      dragonfly       irix_6_1        openbsd       sunos_4_1   
aix_3         dynix   	      isc   	      opus   	    super-ux   
aix_4         dynixptx        isc_2   	      os2   	    svr4   
altos486      epix   	      linux   	      os390   	    svr5   
amigaos       esix4   	      lynxos          os400   	    ti1500   
apollo        fps   	      machten         posix-bc      titanos   
atheos        freebsd         machten_2       powerux       ultrix_4   
aux_3         genix   	      midnightbsd     qnx   	    umips   
beos          gnu   	      mint   	      rhapsody      unicos   
bsdos         gnukfreebsd     mips   	      riscos        unicosmk   
catamount     gnuknetbsd      mpc   	      sco   	    unisysdynix   
convexos      greenhills      mpeix   	      sco_2_3_0     utekv   
cxux          hpux   	      ncr_tower       sco_2_3_1     uts   
cygwin        i386   	      netbsd          sco_2_3_2     uwin   
darwin        interix         newsos4         sco_2_3_3     vmesa   
dcosx         irix_4          next_3          sco_2_3_4     vos   
dec_osf       irix_5          next_3_0        solaris_2   
dgux          irix_6          next_4          stellar   
Which of these apply, if any? [linux]  

You appear to have ELF support.  I'll try to use it for dynamic loading.
If dynamic loading doesn't work, read hints/linux.sh for further information.
Operating system name? [linux]  
Operating system version? [2.6.28-gentoo]  
Installation prefix to use? (~name ok) [/usr]  
AFS does not seem to be running...
What installation prefix should I use for installing files? (~name ok)
[/usr]  
Build Perl for SOCKS? [n]  
Use the PerlIO abstraction layer? [y]  
Getting the current patchlevel...
Build a threading Perl? [n]  
Build Perl for multiplicity? [n]  
Use which C compiler? [x86_64-pc-linux-gnu-gcc]  
Checking for GNU cc in disguise and/or its version number...
Now, how can we feed standard input to your C preprocessor...
Directories to use for library searches?
[/usr/local/lib64 /lib64 /usr/lib64]  
What is the file extension used for shared libraries? [so]  
Try to use long doubles if available? [n]  
Checking for optional libraries...
What libraries to use?
[-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc]  
What optimizer/debugger flag should be used? [-march=core2 -O2 -pipe]  
Any additional cc flags?
[-fno-strict-aliasing -pipe -I/usr/src/linux/include]  
Let me guess what the preprocessor flags are...
Any additional ld flags (NOT including libraries)? [none]  
Checking your choice of C compiler and flags for coherency...
Computing filename position in cpp output for #include directives...
<stdlib.h> found.
Checking to see how big your integers are...
Checking to see if you have long long...
Checking to see how big your long longs are...
<inttypes.h> found.
Checking to see if you have int64_t...
Checking which 64-bit integer type we could use...
We could use 'long' for 64-bit integers.
Try to use maximal 64-bit support, if available? [y]  
Checking to see how big your double precision numbers are...
Checking to see if you have long double...
Checking to see how big your long doubles are...
What is your architecture name [x86_64-linux]  
This architecture is naturally 64-bit, not changing architecture name.
Perlio selected.
Pathname where the public executables will reside? (~name ok) [/usr/bin]  
Use relocatable @INC? [n]  
Pathname where the private library files will reside? (~name ok)
[/usr/lib/perl5/5.10.0]  
Where do you want to put the public architecture-dependent libraries? (~name ok)
[/usr/lib/perl5/5.10.0/x86_64-linux]  
Other username to test security of setuid scripts with? [none]  
Well, the recommended value is *not* secure.
Does your kernel have *secure* setuid scripts? [n]  
Do you want to do setuid/setgid emulation? [n]  
Installation prefix to use for add-on modules and utilities? (~name ok)
[/usr]  
Pathname for the site-specific library files? (~name ok)
[/usr/lib/perl5/site_perl/5.10.0]  
List of earlier versions to include in @INC? [5.8.8]  
<malloc.h> found.
Checking to see how well your C compiler groks the void type...
Good.  It appears to support void to the level perl5 wants.
Checking to see how big your pointers are...
Do you wish to wrap malloc calls to protect against potential overflows? [y]  
Do you wish to attempt to use the malloc that comes with perl5? [n]  
Your system wants malloc to return 'void *', it would seem.
Your system uses void free(), it would seem.
Pathname for the site-specific architecture-dependent library files? (~name ok)
[/usr/lib/perl5/site_perl/5.10.0/x86_64-linux]  
Do you want to configure vendor-specific add-on directories? [y]  
Installation prefix to use for vendor-supplied add-ons? (~name ok) [/usr]  
Pathname for the vendor-supplied library files? (~name ok)
[/usr/lib/perl5/vendor_perl/5.10.0]  
Pathname for vendor-supplied architecture-dependent files? (~name ok)
[/usr/lib/perl5/vendor_perl/5.10.0/x86_64-linux]  
Colon-separated list of additional directories for perl to search? [none]  
Checking out function prototypes...
Install any extra modules (y or n)? [n]  
Directory for the main Perl5 html pages? (~name ok) [none]  
Directory for the Perl5 module html pages? (~name ok) [none]  
Checking for GNU C Library...
Shall I use /usr/bin/nm to extract C symbols from the libraries? [y]  
Where is your C library? [/lib/libc-2.9.so]  
Extracting names from the following files for later perusal:
	/lib/libc-2.9.so
	/lib64/libcrypt.so.1
	/lib64/libdl.so.2
	/lib64/libm.so.6
	/lib64/libnsl.so.1
	/lib64/libpthread.so.0
	/lib64/libutil.so.1
	/usr/lib64/libdb.so
	/usr/lib64/libgdbm.so.3.0.0
This may take a while....done.
<dld.h> NOT found.
Checking for C++...
dlopen() found.
<unistd.h> found.
Do you wish to use dynamic loading? [y]  
Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]  
Any special flags to pass to x86_64-pc-linux-gnu-gcc -c to compile shared library modules?
[-fPIC]  
What command should be used to create dynamic libraries?
[x86_64-pc-linux-gnu-gcc]  
Any special flags to pass to x86_64-pc-linux-gnu-gcc to create a dynamically loaded library?
[-shared -march=core2 -O2 -pipe]  
Any special flags to pass to x86_64-pc-linux-gnu-gcc to use dynamic linking?
[-rdynamic]  
Build a shared libperl.so (y/n) [n]  
System manual is in /usr/share/man/man1.
Where do the main Perl5 manual pages (source) go? (~name ok)
[/usr/share/man/man1]  
What suffix should be used for the main Perl5 man pages? [1]  
You can have filenames longer than 14 characters.
Where do the perl5 library man pages (source) go? (~name ok)
[/usr/share/man/man3]  
What suffix should be used for the perl5 library man pages? [3pm]  
Figuring out host name...
Your host name appears to be "slave-iv". Right? [y]  
cat: /etc/hosts: Permission denied
What is your domain name? [.(none)]  
What is your e-mail address? [Gentoo@slave-iv.(none)]  
Perl administrator e-mail address [Gentoo@slave-iv.(none)]  
Do you want to install only the version-specific parts of perl? [n]  
What shall I put after the #! to start up perl ("none" to not use #!)?
[/usr/bin/perl]  
Where do you keep publicly executable scripts? (~name ok) [/usr/bin]  
Pathname where the add-on public executables should be installed? (~name ok)
[/usr/bin]  
Pathname where the site-specific html pages should be installed? (~name ok)
[none]  
Pathname where the site-specific library html pages should be installed? (~name ok)
[none]  
Pathname where the site-specific manual pages should be installed? (~name ok)
[/usr/share/man/man1]  
Pathname where the site-specific library manual pages should be installed? (~name ok)
[/usr/share/man/man3]  
Pathname where add-on public executable scripts should be installed? (~name ok)
[/usr/bin]  
Use the "fast stdio" if available? [n]  
off_t found.
Checking to see how big your file offsets are...
fpos_t found.
Checking the size of fpos_t...
Try to understand large files, if available? [y]  
Rechecking to see how big your file offsets are...
Rechecking the size of fpos_t... 16 bytes.
Pathname for the vendor-supplied executables directory? (~name ok)
[/usr/bin]  
Pathname for the vendor-supplied html pages? (~name ok) [none]  
Pathname for the vendor-supplied html pages? (~name ok) [none]  
Pathname for the vendor-supplied manual section 1 pages? (~name ok)
[/usr/share/man/man1]  
Pathname for the vendor-supplied manual section 3 pages? (~name ok)
[/usr/share/man/man3]  
Pathname for the vendor-supplied scripts directory? (~name ok) [/usr/bin]  
qgcvt() found.
Checking how to print long doubles...
gconvert NOT found.
gcvt() found.
I'll use gcvt to convert floats into a string.
fwalk() NOT found.
access() found.
<sys/file.h> defines the *_OK access constants.
accessx() NOT found.
aintl() NOT found.
alarm() found.
<pthread.h> found.
<sys/types.h> found.
<sys/select.h> found.
Testing to see if we should include <time.h>, <sys/time.h> or both.
We'll include <time.h>.
We'll include <sys/time.h>.
Checking to see if your struct tm has tm_zone field...
Checking to see if your struct tm has tm_gmtoff field...
asctime_r() found.
atolf() NOT found.
atoll() found.
Checking whether your compiler can handle __attribute__((format)) ...
Checking whether your compiler allows __printf__ format to be null ...
Checking whether your compiler can handle __attribute__((malloc)) ...
Checking whether your compiler can handle __attribute__((nonnull(1))) ...
Checking whether your compiler can handle __attribute__((noreturn)) ...
Checking whether your compiler can handle __attribute__((pure)) ...
Checking whether your compiler can handle __attribute__((unused)) ...
Checking whether your compiler can handle __attribute__((warn_unused_result)) ...
bcmp() found.
bcopy() found.
getpgrp() found.
You have to use getpgrp() instead of getpgrp(pid).
setpgrp() found.
You have to use setpgrp() instead of setpgrp(pid,pgrp).
Checking whether your compiler can handle __builtin_choose_expr ...
Checking whether your compiler can handle __builtin_expect ...
bzero() found.
<stdarg.h> found.
<varargs.h> found.
We'll include <stdarg.h> to get va_dcl definition.
You have <stdarg.h> and <stdlib.h>, so checking for C99 variadic macros.
You have C99 variadic macros.
You have void (*signal())().
Checking whether your C compiler can cast large floats to int32.
Checking whether your C compiler can cast negative float to unsigned.
vprintf() found.
Your vsprintf() returns (int).
chown() found.
chroot() found.
chsize() NOT found.
class() NOT found.
clearenv() found.
Hmm... Looks like you have Berkeley networking support.
socketpair() found.
Checking the availability of certain socket constants...
<sys/uio.h> found.
Checking to see if your system supports struct cmsghdr...
Checking to see if your C compiler knows about "const"...
copysignl() found.
crypt() found.
<crypt.h> found.
crypt_r() found.
ctermid() found.
ctermid_r() NOT found.
ctime_r() found.
cuserid() found.
<limits.h> found.
<float.h> found.
DBL_DIG found.
dbmclose() NOT found.
difftime() found.
<dirent.h> found.
Your directory entries are struct dirent.
Your directory entry does not know about the d_namlen field.
Checking to see if DIR has a dd_fd member variable
<sys/dir.h> found.
<sys/ndir.h> NOT found.
dirfd() found.
dlerror() found.
<dlfcn.h> found.
What is the extension of dynamically loaded modules [so]  
Checking whether your dlsym() needs a leading underscore ...
dlsym doesn't need a leading underscore.
drand48_r() found.
dup2() found.
eaccess() found.
endgrent() found.
<grp.h> found.
endgrent_r() NOT found.
endhostent() found.
<netdb.h> found.
endhostent_r() NOT found.
endnetent() found.
endnetent_r() NOT found.
endprotoent() found.
endprotoent_r() NOT found.
endpwent() found.
<pwd.h> found.
endpwent_r() NOT found.
endservent() found.
endservent_r() NOT found.
<sys/file.h> defines the O_* constants...
and you have the 3 argument form of open().
Using <string.h> instead of <strings.h>.
<sys/file.h> found.
We'll be including <sys/file.h>.
<fcntl.h> found.
We don't need to include <fcntl.h> if we include <sys/file.h>.
fork() found.
pipe() found.
Figuring out the flag used by open() for non-blocking I/O...
Let's see what value errno gets from read() on a O_NONBLOCK file...
In file included from /usr/include/bits/errno.h:25,
                 from /usr/include/errno.h:36,
                 from try.c:2:
/usr/src/linux/include/linux/errno.h:4:23: error: /usr/src/linux/include/asm/errno.h: Permission denied
Checking how std your stdio is...
fchdir() found.
fchmod() found.
fchown() found.
fcntl() found.
Well, you got zip.  That's OK, I can roll my own fd_set stuff.
fgetpos() found.
finite() found.
finitel() found.
flock() found.
fp_class() NOT found.
pathconf() found.
fpathconf() found.
fpclass() NOT found.
fpclassify() NOT found.
fpclassl() NOT found.
Checking to see if you have fpos64_t...
frexpl() found.
<sys/param.h> found.
<sys/mount.h> found.
Checking to see if your system supports struct fs_data...
fseeko() found.
fsetpos() found.
fstatfs() found.
statvfs() found.
fstatvfs() found.
fsync() found.
ftello() found.
Checking if you have a working futimes()
No, it does not (probably harmless)
getcwd() found.
getespwnam() NOT found.
getfsstat() NOT found.
getgrent() found.
getgrent_r() found.
getgrgid_r() found.
getgrnam_r() found.
gethostbyaddr() found.
gethostbyname() found.
gethostent() found.
gethostname() found.
uname() found.
Shall I ignore gethostname() from now on? [n]  
gethostbyaddr_r() found.
gethostbyname_r() found.
gethostent_r() found.
getitimer() found.
getlogin() found.
getlogin_r() found.
getmnt() NOT found.
getmntent() found.
getnetbyaddr() found.
getnetbyname() found.
getnetent() found.
getnetbyaddr_r() found.
getnetbyname_r() found.
getnetent_r() found.
getpagesize() found.
getprotobyname() found.
getprotobynumber() found.
getprotoent() found.
getpgid() found.
getpgrp2() NOT found.
getppid() found.
getpriority() found.
getprotobyname_r() found.
getprotobynumber_r() found.
getprotoent_r() found.
getprpwnam() NOT found.
getpwent() found.
getpwent_r() found.
getpwnam_r() found.
getpwuid_r() found.
getservbyname() found.
getservbyport() found.
getservent() found.
getservbyname_r() found.
getservbyport_r() found.
getservent_r() found.
getspnam() found.
<shadow.h> found.
getspnam_r() found.
gettimeofday() found.
gmtime_r() found.
hasmntopt() found.
<netinet/in.h> found.
<arpa/inet.h> found.
htonl() found.
ilogbl() found.
strchr() found.
inet_aton() found.
isascii() found.
isfinite() NOT found.
isinf() found.
isnan() found.
isnanl() found.
killpg() found.
lchown() found.
LDBL_DIG found.
<math.h> found.
Checking to see if your libm supports _LIB_VERSION...
Yes, it does (2)
link() found.
localtime_r() found.
localeconv() found.
lockf() found.
lstat() NOT found.
Hmm.  Based on the hints in hints/linux.sh, 
the recommended value for $d_lstat on this machine was "define"!
    Keep the recommended value? [y]  
madvise() found.
malloc_size() NOT found.
malloc_good_size() NOT found.
mblen() found.
mbstowcs() found.
mbtowc() found.
memchr() found.
memcmp() found.
memcpy() found.
memmove() found.
memset() found.
mkdir() found.
mkdtemp() found.
mkfifo() found.
mkstemp() found.
mkstemps() NOT found.
mktime() found.
<sys/mman.h> found.
mmap() found.
and it returns (void *).
sqrtl() found.
scalbnl() found.
modfl() found.
Your modfl() seems okay for large values.
mprotect() found.
msgctl() found.
msgget() found.
msgsnd() found.
msgrcv() found.
You have the full msg*(2) library.
Checking to see if your system supports struct msghdr...
msync() found.
munmap() found.
nice() found.
<langinfo.h> found.
nl_langinfo() found.
Checking to see if your C compiler knows about "volatile"...
Choosing the C types to be used for Perl's internal types...
Checking how many bits of your UVs your NVs can preserve...
Checking whether NV 0.0 is all bits zero in memory...
0.0 is represented as all bits zero in memory
Checking to see if you have off64_t...
pause() found.
poll() found.
readlink() found.
vfork() found.
Do you still want to use vfork()? [n]  
pthread_attr_setscope() found.
random_r() found.
readdir() found.
seekdir() found.
telldir() found.
rewinddir() found.
readdir64_r() found.
readdir_r() found.
readv() found.
recvmsg() found.
rename() found.
rmdir() found.
<memory.h> found.
Checking if your memcmp() can compare relative magnitude...
select() found.
semctl() found.
semget() found.
semop() found.
You have the full sem*(2) library.
You do not have union semun in <sys/sem.h>.
You can use union semun for semctl IPC_STAT.
You cannot use struct semid_ds* for semctl IPC_STAT.
sendmsg() found.
setegid() found.
seteuid() found.
setgrent() found.
setgrent_r() NOT found.
sethostent() found.
sethostent_r() NOT found.
setitimer() found.
setlinebuf() found.
setlocale() found.
<locale.h> found.
setlocale_r() NOT found.
setnetent() found.
setnetent_r() NOT found.
setprotoent() found.
setpgid() found.
setpgrp2() NOT found.
setpriority() found.
setproctitle() NOT found.
setprotoent_r() NOT found.
setpwent() found.
setpwent_r() NOT found.
setregid() found.
setresgid() found.
setreuid() found.
setresuid() found.
setrgid() NOT found.
setruid() NOT found.
setservent() found.
setservent_r() NOT found.
setsid() found.
setvbuf() found.
<sfio.h> NOT found.
shmctl() found.
shmget() found.
shmat() found.
and it returns (void *).
shmdt() found.
You have the full shm*(2) library.
sigaction() found.
<sunmath.h> NOT found.
Checking to see if you have signbit() available to work on double... Yes.
sigprocmask() found.
POSIX sigsetjmp found.
snprintf() found.
vsnprintf() found.
sockatmark() found.
socks5_init() NOT found.
Checking whether sprintf returns the length of the string...
sprintf returns the length of the string (as ANSI says it should)
srand48_r() found.
srandom_r() found.
<sys/stat.h> found.
Checking to see if your struct stat has st_blocks field...
<sys/vfs.h> found.
<sys/statfs.h> found.
Checking to see if your system supports struct statfs...
Checking how to access stdio streams by file descriptor number...
I can't figure out how to access stdio streams by file descriptor number.
strcoll() found.
Checking to see if your C compiler can copy structs...
strerror() found.
strerror_r() found.
strftime() found.
strlcat() NOT found.
strlcpy() NOT found.
strtod() found.
strtol() found.
strtold() found.
strtoll() found.
strtoq() found.
strtoul() found.
strtoull() found.
strtouq() found.
strxfrm() found.
symlink() found.
syscall() found.
sysconf() found.
system() found.
tcgetpgrp() found.
tcsetpgrp() found.
time() found.
time_t found.
<sys/times.h> found.
times() found.
clock_t found.
tmpnam_r() found.
truncate() found.
ttyname_r() found.
tzname[] found.
(Testing for character data alignment may crash the test.  That's okay.)
It seems that you must access character data in an aligned manner.
ualarm() found.
umask() found.
unordered() NOT found.
unsetenv() found.
usleep() found.
ustat() found.
closedir() found.
Checking whether closedir() returns a status...
wait4() found.
waitpid() found.
wcstombs() found.
wctomb() found.
writev() found.
Checking alignment constraints...
Doubles must be aligned on a how-many-byte boundary? [8]  
Checking to see how your cpp does stuff like concatenate tokens...
Oh!  Smells like ANSI's been here.
<db.h> found.
Hmm.  Based on the hints in hints/linux.sh, 
the recommended value for $i_db on this machine was "undef"!
    Keep the recommended value? [y]  
Looking for a random number function...
Good, found drand48().
Use which function to generate random numbers? [drand48]  
Determining whether or not we are on an EBCDIC system...
Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.
Checking how to flush all pending stdio output...
Your fflush(NULL) works okay for output streams.
Let's see if it clobbers input pipes...
fflush(NULL) seems to behave okay with input streams.
Checking the size of gid_t...
Checking the sign of gid_t...
Checking how to print 64-bit integers...
Checking the format strings to be used for Perl's internal types...
Checking the format string to be used for gids...
getgroups() found.
setgroups() found.
What type pointer is the second argument to getgroups() and setgroups()?
[gid_t]  
Build Perl with MAD? [n]  
Checking if your /usr/bin/make program sets $(MAKE)...
mode_t found.
It seems that va_copy() or similar will be needed.
size_t found.
What is the type for the 1st argument to gethostbyaddr? [char *]  
What is the type for the 2nd argument to gethostbyaddr? [size_t]  
What is the type for the 1st argument to gethostbyname? [char *]  
What is the type for the 1st argument to getnetbyaddr? [long]  
What pager is used on your system? [/usr/bin/less]  
pid_t found.
Checking how to generate random libraries on your machine...
What is the type for the 2nd, 3rd, and 4th arguments to select? [int *]  
In file included from /usr/include/sys/socket.h:40,
                 from try.c:23:
/usr/include/bits/socket.h:354:24: error: /usr/src/linux/include/asm/socket.h: Permission denied
try.c: In function 'main':
try.c:53: error: request for member '__fds_bits' in something not a structure or union
try.c:56: warning: passing argument 2 of 'select' from incompatible pointer type
try.c:57: error: request for member '__fds_bits' in something not a structure or union
What is the minimum number of bits your select() operates on? [64]  
Generating a list of signal names and numbers...
Checking the size of size_t...
Checking to see if you have socklen_t...
<socks.h> NOT found.
What is the type for socket address structure sizes? [int]  
I'll be using ssize_t for functions returning a byte count.
Your stdio uses signed chars.
Checking the size of uid_t...
Checking the sign of uid_t...
Checking the format string to be used for uids...
Which compiler compiler (yacc or bison -y) shall I use? [yacc]  
<fp.h> NOT found.
<fp_class.h> NOT found.
<gdbm.h> found.
gdbm_open() found.
<ieeefp.h> NOT found.
<libutil.h> NOT found.
<mntent.h> found.
<ndbm.h> NOT found.
dbm_open() NOT found.
Hmm.  Based on the hints in hints/linux.sh, 
the recommended value for $i_ndbm on this machine was "define"!
    Keep the recommended value? [y]  
<net/errno.h> NOT found.
<netinet/tcp.h> found.
<poll.h> found.
<prot.h> NOT found.
Guessing which symbols your C compiler and preprocessor define...
tcsetattr() found.
You have POSIX termios.h... good!
<stddef.h> found.
<sys/access.h> NOT found.
<sys/filio.h> NOT found.
<sys/ioctl.h> found.
<syslog.h> found.
<sys/mode.h> NOT found.
<sys/resource.h> found.
<sys/security.h> NOT found.
<sys/statvfs.h> found.
<sys/un.h> found.
<sys/utsname.h> found.
<sys/wait.h> found.
<ustat.h> found.
<utime.h> found.
<values.h> found.
Looking for extensions...
What extensions do you wish to load dynamically?
[B Compress/Raw/Zlib Cwd Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Digest/SHA Encode Fcntl File/Glob Filter/Util/Call GDBM_File Hash/Util I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 Math/BigInt/FastCalc NDBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Text/Soundex Time/HiRes Time/Piece Unicode/Normalize XS/APItest XS/Typemap attrs re threads threads/shared Hash/Util/FieldHash]  
What extensions do you wish to load statically? [none]  
Stripping down executable paths...
Creating config.sh...
Doing variable substitutions on .SH files...
Extracting config.h (with variable substitutions)
Extracting cflags (with variable substitutions)
Not re-extracting config.h
Extracting makeaperl (with variable substitutions)
Extracting makedepend (with variable substitutions)
Extracting makedir (with variable substitutions)
Extracting Makefile (with variable substitutions)
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting utils/Makefile (with variable substitutions)
Extracting writemain (with variable substitutions)
Extracting x2p/cflags (with variable substitutions)
Extracting x2p/Makefile (with variable substitutions)
Run make depend now? [y]  
sh ./makedepend MAKE=make
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0'
sh writemain DynaLoader.o  > perlmain.c
rm -f opmini.c
cp op.c opmini.c
echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c   miniperlmain.c perlmain.c opmini.c | tr ' ' '\n' >.clist
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0'
Finding dependencies for av.o.
Finding dependencies for scope.o.
Finding dependencies for op.o.
Finding dependencies for doop.o.
Finding dependencies for doio.o.
Finding dependencies for dump.o.
Finding dependencies for gv.o.
Finding dependencies for hv.o.
Finding dependencies for mg.o.
Finding dependencies for reentr.o.
Finding dependencies for mro.o.
Finding dependencies for perl.o.
Finding dependencies for perly.o.
Finding dependencies for pp.o.
Finding dependencies for pp_hot.o.
Finding dependencies for pp_ctl.o.
Finding dependencies for pp_sys.o.
Finding dependencies for regcomp.o.
Finding dependencies for regexec.o.
Finding dependencies for utf8.o.
Finding dependencies for sv.o.
Finding dependencies for taint.o.
Finding dependencies for toke.o.
Finding dependencies for util.o.
Finding dependencies for deb.o.
Finding dependencies for run.o.
Finding dependencies for universal.o.
Finding dependencies for xsutils.o.
Finding dependencies for pad.o.
Finding dependencies for globals.o.
Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for mathoms.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for perlmain.o.
Finding dependencies for opmini.o.
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0'
echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH makedir.SH myconfig.SH writemain.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0'
Updating makefile...
test -s perlmain.c && touch perlmain.c
cd x2p; make depend
make[1]: Entering directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0/x2p'
sh ../makedepend MAKE=make
make[2]: Entering directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0/x2p'
echo hash.c  str.c util.c walk.c | tr ' ' '\n' >.clist
make[2]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0/x2p'
Finding dependencies for hash.o.
Finding dependencies for str.o.
Finding dependencies for util.o.
Finding dependencies for walk.o.
make[2]: Entering directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0/x2p'
echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
make[2]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0/x2p'
Updating makefile...
make[1]: Leaving directory `/var/tmp/portage/dev-lang/perl-5.10.0/work/perl-5.10.0/x2p'
Now you must run 'make'.

If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.

make -j4 -j1 
`sh  cflags "optimize='-march=core2 -O2 -pipe'" miniperlmain.o` -fPIC miniperlmain.c
	  CCCMD =  x86_64-pc-linux-gnu-gcc -DPERL_CORE -c -fno-strict-aliasing -pipe -I/usr/src/linux/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm  -std=c89 -march=core2 -O2 -pipe  -Wall -ansi -pedantic -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wc++-compat -DPERL_GCC_PEDANTIC 
In file included from /usr/include/sys/param.h:28,
                 from perl.h:653,
                 from miniperlmain.c:36:
/usr/src/linux/include/linux/param.h:4:23: error: /usr/src/linux/include/asm/param.h: Permission denied
In file included from /usr/include/sys/socket.h:40,
                 from /usr/include/netinet/in.h:25,
                 from perl.h:1123,
                 from miniperlmain.c:36:
/usr/include/bits/socket.h:354:24: error: /usr/src/linux/include/asm/socket.h: Permission denied
In file included from /usr/include/bits/errno.h:25,
                 from /usr/include/errno.h:36,
                 from perl.h:1180,
                 from miniperlmain.c:36:
/usr/src/linux/include/linux/errno.h:4:23: error: /usr/src/linux/include/asm/errno.h: Permission denied
In file included from /usr/include/sys/ioctl.h:27,
                 from perl.h:1328,
                 from miniperlmain.c:36:
/usr/include/bits/ioctls.h:24:24: error: /usr/src/linux/include/asm/ioctls.h: Permission denied
make: *** [miniperlmain.o] Error 1
 [31;01m*[0m 
 [31;01m*[0m ERROR: dev-lang/perl-5.10.0 failed.
 [31;01m*[0m Call stack:
 [31;01m*[0m               ebuild.sh, line   49:  Called src_compile
 [31;01m*[0m             environment, line 2498:  Called die
 [31;01m*[0m The specific snippet of code:
 [31;01m*[0m       emake -j1 || die "Unable to make"
 [31;01m*[0m  The die message:
 [31;01m*[0m   Unable to make
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the topmost build error, and the call stack if relevant.
 [31;01m*[0m A complete build log is located at '/var/tmp/portage/dev-lang/perl-5.10.0/temp/build.log'.
 [31;01m*[0m The ebuild environment file is located at '/var/tmp/portage/dev-lang/perl-5.10.0/temp/environment'.
 [31;01m*[0m This ebuild is from an overlay: '/usr/local/portage/layman/perl-experimental/'
 [31;01m*[0m