Linux version 2.6.26-gentoo-r4 (root@tux) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #3 SMP Sat Dec 13 12:16:38 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6d3400 (usable) BIOS-e820: 000000007f6d3400 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1142MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 521939) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 521939 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 521939 On node 0 totalpages: 521939 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2286 pages used for memmap HighMem zone: 290277 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.4 present. Using APIC driver default ACPI: RSDP 000FC1D0, 0014 (r0 DELL ) ACPI: RSDT 7F6D398B, 0040 (r1 DELL M07 27D7060D ASL 61) ACPI: FACP 7F6D4800, 0074 (r1 DELL M07 27D7060D ASL 61) ACPI: DSDT 7F6D5400, 4766 (r1 INT430 SYSFexxx 1001 INTL 20050624) ACPI: FACS 7F6E3C00, 0040 ACPI: HPET 7F6D4F00, 0038 (r1 DELL M07 1 ASL 61) ACPI: APIC 7F6D5000, 0068 (r1 DELL M07 27D7060D ASL 47) ACPI: MCFG 7F6D4FC0, 003E (r16 DELL M07 27D7060D ASL 61) ACPI: SLIC 7F6D509C, 0024 (r1 DELL M07 27D7060D ASL 61) ACPI: BOOT 7F6D4BC0, 0028 (r1 DELL M07 27D7060D ASL 61) ACPI: SSDT 7F6D39CB, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 39464 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517861 Kernel command line: root=/dev/sda3 usr=/dev/sda5 var=/dev/sda6 home=/dev/sda7 resume=/dev/sda2 vga=791 splash=silent console=tty1 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1862.161 MHz processor. Console: colour dummy device 80x25 console [tty1] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2063236k/2087756k available (3343k kernel code, 23396k reserved, 1761k data, 344k init, 1170252k highmem) virtual kernel memory layout: fixmap : 0xffe14000 - 0xfffff000 (1964 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0605000 - 0xc065b000 ( 344 kB) .data : 0xc0443d80 - 0xc05fc4d0 (1761 kB) .text : 0xc0100000 - 0xc0443d80 (3343 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3728.45 BogoMIPS (lpj=7456905) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080321 Parsing all Control Methods: Table [DSDT](id 0001) - 648 Objects with 88 Devices 223 Methods 13 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 13 Objects with 0 Devices 4 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3724.01 BogoMIPS (lpj=7448028) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c checking TSC synchronization [CPU#0 -> CPU#1]: Measured 3755086146 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to: check_tsc_sync_source failed. Brought up 2 CPUs Total of 2 processors activated (7452.46 BogoMIPS). net_namespace: 332 bytes NET: Registered protocol family 16 No dock devices found. EISA bus registered ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:............................................................................. Initialized 10/13 Regions 10/12 Fields 28/29 Buffers 29/29 Packages (670 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 0 _STA executions (examined 93 objects) evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 3 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:00: iomem range 0x0-0x9fbff could not be reserved system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xcffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7f6d33ff could not be reserved system 00:00: iomem range 0x7f6d3400-0x7f6fffff could not be reserved system 00:00: iomem range 0x7f700000-0x7f7fffff could not be reserved system 00:00: iomem range 0x7f700000-0x7fefffff could not be reserved system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved system 00:00: iomem range 0xf4000000-0xf4003fff could not be reserved system 00:00: iomem range 0xf4004000-0xf4004fff could not be reserved system 00:00: iomem range 0xf4005000-0xf4005fff could not be reserved system 00:00: iomem range 0xf4006000-0xf4006fff could not be reserved system 00:00: iomem range 0xf4008000-0xf400bfff could not be reserved system 00:00: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x1000-0x1005 has been reserved system 00:02: ioport range 0x1008-0x100f has been reserved system 00:03: ioport range 0xf400-0xf4fe has been reserved system 00:03: ioport range 0x1006-0x1007 has been reserved system 00:03: ioport range 0x100a-0x1059 could not be reserved system 00:03: ioport range 0x1060-0x107f has been reserved system 00:03: ioport range 0x1080-0x10bf has been reserved system 00:03: ioport range 0x10c0-0x10df has been reserved system 00:03: ioport range 0x1010-0x102f has been reserved system 00:03: ioport range 0x809-0x809 has been reserved system 00:08: ioport range 0xc80-0xcff could not be reserved system 00:08: ioport range 0x910-0x91f has been reserved system 00:08: ioport range 0x920-0x92f has been reserved system 00:08: ioport range 0xcb0-0xcbf has been reserved system 00:08: ioport range 0x930-0x97f has been reserved system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 0xefd00000-0xefdfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: d000-dfff MEM window: 0xefa00000-0xefcfffff PREFETCH window: 0x00000000e0000000-0x00000000e01fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0xef900000-0xef9fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x79 set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.9) msgmni has been set to 1745 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:00:02.0: Boot video device PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy i8k: unable to get SMM BIOS version Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org) intel_rng: FWH not detected Linux agpgart interface v0.103 agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 vesafb: framebuffer at 0xd0000000, mapped to 0xf8a00000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /class/input/input0 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SBTN] ACPI: SSDT 7F6D40F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 0065) - 6 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT 7F6D3EA7, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 0066) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F6D4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 006A) - 4 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT 7F6D406D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) Parsing all Control Methods: Table [SSDT](id 006B) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM] (53 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets intelfb: Version 0.9.5 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 intelfb: Cannot reserve FB region. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled brd: module loaded loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. Clocksource tsc unstable (delta = 2016477110 ns) e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:b5:14:8d console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 3ware Storage Controller device driver for Linux v1.26.02.002. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 ata1.00: ATA-8: FUJITSU MHW2080BJ G2, 0085001A, max UDMA/100 ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 ata2.00: ATAPI: Optiarc DVD+/-RW AD-5560A, DD11, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 0085 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-5560A DD11 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc00017dd2070] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input4 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI No-Shortcut mode TuxOnIce 3.0-rc7 (http://tuxonice.net) Replacing swsusp. TuxOnIce: Normal swapspace found. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 344k freed ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mpr ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0b:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection firmware: requesting ipw3945.ucode ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. vboxdrv: fAsync=1 offMin=0xdfd1a80a offMax=0xdfd1a80a vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.0.6 (interface 0x00090000). EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k [drm] Initialized drm 1.1.0 20060810 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0