dmesg after boot

dmesg (text/plain), 35.75 KB, created by Oliver R on 2008-12-08 20:49:50 UTC

Linux version 2.6.27-gentoo-r4 (root@chef-rechner) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #3 SMP PREEMPT Fri Nov 28 18:26:26 CET 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
 BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
 BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
 BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7fee0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 38000000 @ 7000-c000
ACPI: RSDP 000F6B40, 0014 (r0 GBT   )
ACPI: RSDT 7FEE3040, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: FACP 7FEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: DSDT 7FEE3180, 4B2A (r1 GBT    GBTUACPI     1000 MSFT  100000C)
ACPI: FACS 7FEE0000, 0040
ACPI: HPET 7FEE7E00, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
ACPI: MCFG 7FEE7E80, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: APIC 7FEE7D00, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: SSDT 7FEE8520, 03AB (r1  PmRef    CpuPm     3000 INTL 20040311)
1150MB HIGHMEM available.
896MB LOWMEM available.
  mapped low ram: 0 - 38000000
  low ram: 00000000 - 38000000
  bootmap 00008000 - 0000f000
(8 early reservations) ==> bootmem [0000000000 - 0038000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000052e9e0]    TEXT DATA BSS ==> [0000100000 - 000052e9e0]
  #4 [000052f000 - 0000532000]    INIT_PG_TABLE ==> [000052f000 - 0000532000]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f5150] 000f5150
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00038000
  HighMem  0x00038000 -> 0x0007fee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0007fee0
On node 0 totalpages: 523903
free_area_init_node: node 0, pgdat c0491d80, node_mem_map c1000000
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 292322 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
PERCPU: Allocating 37980 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519809
Kernel command line: BOOT_IMAGE=Gentoo5 ro root=803 real_root=/dev/sda3 video=uvesafb:1280x1024-32,mtrr:3,ywrap log_buf_len=64k
log_buf_len: 65536
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2666.654 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072996k/2096000k available (2593k kernel code, 21764k reserved, 1128k data, 276k init, 1178496k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff51000 - 0xfffff000   ( 696 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc04aa000 - 0xc04ef000   ( 276 kB)
      .data : 0xc03885b6 - 0xc04a28b8   (1128 kB)
      .text : 0xc0100000 - 0xc03885b6   (2593 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.30 BogoMIPS (lpj=2666654)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5333.30 BogoMIPS (lpj=2666650)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10666.60 BogoMIPS).
net_namespace: 596 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: Fatal: No config space access function found
ACPI: EC: Look up EC in DSDT
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR
ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609]
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR
ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [d100, d11f]
PCI: 0000:00:1a.1 reg 20 io port: [d200, d21f]
PCI: 0000:00:1a.2 reg 20 io port: [d000, d01f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [ea205000, ea2053ff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [ea200000, ea203fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [d300, d31f]
PCI: 0000:00:1d.1 reg 20 io port: [d400, d41f]
PCI: 0000:00:1d.2 reg 20 io port: [d500, d51f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [ea204000, ea2043ff]
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [d600, d607]
PCI: 0000:00:1f.2 reg 14 io port: [d700, d703]
PCI: 0000:00:1f.2 reg 18 io port: [d800, d807]
PCI: 0000:00:1f.2 reg 1c io port: [d900, d903]
PCI: 0000:00:1f.2 reg 20 io port: [da00, da0f]
PCI: 0000:00:1f.2 reg 24 io port: [db00, db0f]
PCI: 0000:00:1f.3 reg 10 64bit mmio: [ea206000, ea2060ff]
PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
PCI: 0000:00:1f.5 reg 10 io port: [dd00, dd07]
PCI: 0000:00:1f.5 reg 14 io port: [de00, de03]
PCI: 0000:00:1f.5 reg 18 io port: [df00, df07]
PCI: 0000:00:1f.5 reg 1c io port: [e000, e003]
PCI: 0000:00:1f.5 reg 20 io port: [e100, e10f]
PCI: 0000:00:1f.5 reg 24 io port: [e200, e20f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [e6000000, e6ffffff]
PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [e4000000, e5ffffff]
PCI: 0000:01:00.0 reg 24 io port: [a000, a07f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
PCI: bridge 0000:00:01.0 io port: [a000, afff]
PCI: bridge 0000:00:01.0 32bit mmio: [e4000000, e7ffffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: bridge 0000:00:1c.0 io port: [9000, 9fff]
PCI: 0000:03:00.0 reg 24 32bit mmio: [ea000000, ea001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
PCI: 0000:03:00.1 reg 10 io port: [b000, b007]
PCI: 0000:03:00.1 reg 14 io port: [b100, b103]
PCI: 0000:03:00.1 reg 18 io port: [b200, b207]
PCI: 0000:03:00.1 reg 1c io port: [b300, b303]
PCI: 0000:03:00.1 reg 20 io port: [b400, b40f]
PCI: bridge 0000:00:1c.3 io port: [b000, bfff]
PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ea0fffff]
PCI: 0000:04:00.0 reg 10 io port: [c000, c0ff]
PCI: 0000:04:00.0 reg 18 64bit mmio: [e9000000, e9000fff]
PCI: 0000:04:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: supports D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
PCI: bridge 0000:00:1c.4 io port: [c000, cfff]
PCI: bridge 0000:00:1c.4 32bit mmio: [e8000000, e9ffffff]
PCI: 0000:05:00.0 reg 10 32bit mmio: [ea100000, ea100fff]
PCI: 0000:05:00.1 reg 10 32bit mmio: [ea101000, ea101fff]
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 64bit mmio pref: [ea100000, ea1fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: System does not support PCI
PCI: System does not support PCI
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x290-0x29f has been reserved
system 00:01: ioport range 0x800-0x87f has been reserved
system 00:01: ioport range 0x290-0x294 has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:09: ioport range 0x400-0x4bf could not be reserved
system 00:0a: iomem range 0xe0000000-0xe3ffffff could not be reserved
system 00:0b: iomem range 0xcd200-0xcffff has been reserved
system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfed10000-0xfed1dfff could not be reserved
system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved
system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0b: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x1000-0x1fff
pci 0000:00:01.0:   MEM window: 0x98000000-0x9affffff
pci 0000:00:01.0:   PREFETCH window: 0x00000080000000-0x00000097ffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
pci 0000:00:1c.3:   MEM window: 0x9b000000-0x9b0fffff
pci 0000:00:1c.3:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.4:   IO window: 0x3000-0x3fff
pci 0000:00:1c.4:   MEM window: 0x9b100000-0x9b1fffff
pci 0000:00:1c.4:   PREFETCH window: 0x0000009b200000-0x0000009b2fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: 0x0000009b300000-0x0000009b3fffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [1000, 1fff]
bus: 01 index 1 mmio: [98000000, 9affffff]
bus: 01 index 2 mmio: [80000000, 97ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [9000, 9fff]
bus: 02 index 1 mmio: [0, 0]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [2000, 2fff]
bus: 03 index 1 mmio: [9b000000, 9b0fffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [3000, 3fff]
bus: 04 index 1 mmio: [9b100000, 9b1fffff]
bus: 04 index 2 mmio: [9b200000, 9b2fffff]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [0, 0]
bus: 05 index 2 mmio: [9b300000, 9b3fffff]
bus: 05 index 3 io port: [0, ffff]
bus: 05 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
msgmni has been set to 1748
io scheduler noop registered (default)
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
uvesafb: NVIDIA Corporation, G84 Board - p403h05 - p403h05 , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: protected mode interface info at c000:b6e0
uvesafb: pmi: set display start = c00cb743, set palette = c00cb79e
uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=2867
uvesafb: cannot reserve video memory at 0xff0000
uvesafb: probe of uvesafb.0 failed with error -5
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 7FEE7F00, 022A (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FEE83C0, 0152 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: no MSI. Back to INTx.
eth0: RTL8168b/8111b at 0xf8828000, 00:1d:7d:9d:60:30, XID 38000000 IRQ 16
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:03:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0x9b000000 port 0x9b000100 irq 19
ata2: SATA max UDMA/133 abar m8192@0x9b000000 port 0x9b000180 irq 19
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x4420 ctl 0x4440 bmdma 0x40e0 irq 19
ata4: SATA max UDMA/133 cmd 0x4428 ctl 0x4444 bmdma 0x40e8 irq 19
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: ASUS    DRW-2014L1T, 1.00, max UDMA/66
ata3.00: configured for UDMA/66
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: HPA detected: current 976771055, native 976773168
ata4.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access     ATA      ST3500641AS      3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg1 type 0
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x4430 ctl 0x4448 bmdma 0x4400 irq 19
ata6: SATA max UDMA/133 cmd 0x4438 ctl 0x444c bmdma 0x4408 irq 19
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ieee1394: raw1394: /dev/raw1394 device initialized
NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0x9b404000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x9b404400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00004020
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-1: new low speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 4-1: configuration #1 chosen from 1 choice
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 4-2: new low speed USB device using uhci_hcd and address 3
Initializing USB Mass Storage driver...
usb 4-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Bluetooth: HCI USB driver ver 2.10
usbcore: registered new interface driver hci_usb
input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1
input: BTC USB Multimedia Keyboard as /class/input/input3
input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.1-2
input: BTC USB Multimedia Keyboard as /class/input/input4
input: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.1-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA device list:
  #0: HDA Intel at 0x9b400000 irq 22
Netfilter messages via NETLINK v0.30.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Starting balanced_irq
Using IPI No-Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 276k freed
Bt87x 0000:05:00.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
bt87x0: Using board 1, analog, digital (rate 32000 Hz)
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 20, latency: 32, mmio: 0x9b300000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom 1-0050: Hauppauge model 44354, rev B121, serial# 2146188
tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP3415 (idx 6)
tveeprom 1-0050: has radio
bttv0: Hauppauge eeprom indicates model#44354
bttv0: tuner type=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp3400' 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
msp3400' 1-0040: msp3400 supports nicam, mode is autodetect
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
nvidia: module license 'NVIDIA' taints kernel.
tuner' 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  177.80  Wed Oct  1 14:38:10 PDT 2008
EXT3 FS on sda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 7815612k swap on /dev/sda2.  Priority:-1 extents:1 across:7815612k
r8169: eth0: link up
r8169: eth0: link up