Linux version 2.6.27-gentoo-r4 (root@chef-rechner) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #3 SMP PREEMPT Fri Nov 28 18:26:26 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7fee0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 38000000 @ 7000-c000 ACPI: RSDP 000F6B40, 0014 (r0 GBT ) ACPI: RSDT 7FEE3040, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: FACP 7FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: DSDT 7FEE3180, 4B2A (r1 GBT GBTUACPI 1000 MSFT 100000C) ACPI: FACS 7FEE0000, 0040 ACPI: HPET 7FEE7E00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) ACPI: MCFG 7FEE7E80, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: APIC 7FEE7D00, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: SSDT 7FEE8520, 03AB (r1 PmRef CpuPm 3000 INTL 20040311) 1150MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (8 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000052e9e0] TEXT DATA BSS ==> [0000100000 - 000052e9e0] #4 [000052f000 - 0000532000] INIT_PG_TABLE ==> [000052f000 - 0000532000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f5150] 000f5150 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x0007fee0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fee0 On node 0 totalpages: 523903 free_area_init_node: node 0, pgdat c0491d80, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 292322 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) PERCPU: Allocating 37980 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809 Kernel command line: BOOT_IMAGE=Gentoo5 ro root=803 real_root=/dev/sda3 video=uvesafb:1280x1024-32,mtrr:3,ywrap log_buf_len=64k log_buf_len: 65536 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2666.654 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2072996k/2096000k available (2593k kernel code, 21764k reserved, 1128k data, 276k init, 1178496k highmem) virtual kernel memory layout: fixmap : 0xfff51000 - 0xfffff000 ( 696 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04aa000 - 0xc04ef000 ( 276 kB) .data : 0xc03885b6 - 0xc04a28b8 (1128 kB) .text : 0xc0100000 - 0xc03885b6 (2593 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.30 BogoMIPS (lpj=2666654) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5333.30 BogoMIPS (lpj=2666650) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10666.60 BogoMIPS). net_namespace: 596 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: Fatal: No config space access function found ACPI: EC: Look up EC in DSDT ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKA._STA] (Node f7816f78), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKB._STA] (Node f7817048), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKC._STA] (Node f7817108), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKD._STA] (Node f78171c8), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKE._STA] (Node f7817288), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNKF._STA] (Node f7817348), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK0._STA] (Node f7817408), AE_ERROR ACPI Exception (evregion-0419): AE_ERROR, Returned by Handler for [PCI_Config] [20080609] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.LNK1._STA] (Node f78174c8), AE_ERROR PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [d100, d11f] PCI: 0000:00:1a.1 reg 20 io port: [d200, d21f] PCI: 0000:00:1a.2 reg 20 io port: [d000, d01f] PCI: 0000:00:1a.7 reg 10 32bit mmio: [ea205000, ea2053ff] PCI: 0000:00:1b.0 reg 10 64bit mmio: [ea200000, ea203fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [d300, d31f] PCI: 0000:00:1d.1 reg 20 io port: [d400, d41f] PCI: 0000:00:1d.2 reg 20 io port: [d500, d51f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ea204000, ea2043ff] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [d600, d607] PCI: 0000:00:1f.2 reg 14 io port: [d700, d703] PCI: 0000:00:1f.2 reg 18 io port: [d800, d807] PCI: 0000:00:1f.2 reg 1c io port: [d900, d903] PCI: 0000:00:1f.2 reg 20 io port: [da00, da0f] PCI: 0000:00:1f.2 reg 24 io port: [db00, db0f] PCI: 0000:00:1f.3 reg 10 64bit mmio: [ea206000, ea2060ff] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f] PCI: 0000:00:1f.5 reg 10 io port: [dd00, dd07] PCI: 0000:00:1f.5 reg 14 io port: [de00, de03] PCI: 0000:00:1f.5 reg 18 io port: [df00, df07] PCI: 0000:00:1f.5 reg 1c io port: [e000, e003] PCI: 0000:00:1f.5 reg 20 io port: [e100, e10f] PCI: 0000:00:1f.5 reg 24 io port: [e200, e20f] PCI: 0000:01:00.0 reg 10 32bit mmio: [e6000000, e6ffffff] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [e4000000, e5ffffff] PCI: 0000:01:00.0 reg 24 io port: [a000, a07f] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] PCI: bridge 0000:00:01.0 io port: [a000, afff] PCI: bridge 0000:00:01.0 32bit mmio: [e4000000, e7ffffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] PCI: bridge 0000:00:1c.0 io port: [9000, 9fff] PCI: 0000:03:00.0 reg 24 32bit mmio: [ea000000, ea001fff] pci 0000:03:00.0: PME# supported from D3hot pci 0000:03:00.0: PME# disabled PCI: 0000:03:00.1 reg 10 io port: [b000, b007] PCI: 0000:03:00.1 reg 14 io port: [b100, b103] PCI: 0000:03:00.1 reg 18 io port: [b200, b207] PCI: 0000:03:00.1 reg 1c io port: [b300, b303] PCI: 0000:03:00.1 reg 20 io port: [b400, b40f] PCI: bridge 0000:00:1c.3 io port: [b000, bfff] PCI: bridge 0000:00:1c.3 32bit mmio: [ea000000, ea0fffff] PCI: 0000:04:00.0 reg 10 io port: [c000, c0ff] PCI: 0000:04:00.0 reg 18 64bit mmio: [e9000000, e9000fff] PCI: 0000:04:00.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:04:00.0: supports D1 pci 0000:04:00.0: supports D2 pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled PCI: bridge 0000:00:1c.4 io port: [c000, cfff] PCI: bridge 0000:00:1c.4 32bit mmio: [e8000000, e9ffffff] PCI: 0000:05:00.0 reg 10 32bit mmio: [ea100000, ea100fff] PCI: 0000:05:00.1 reg 10 32bit mmio: [ea101000, ea101fff] pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 64bit mmio pref: [ea100000, ea1fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: System does not support PCI PCI: System does not support PCI Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x290-0x29f has been reserved system 00:01: ioport range 0x800-0x87f has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:01: ioport range 0x880-0x88f has been reserved system 00:09: ioport range 0x400-0x4bf could not be reserved system 00:0a: iomem range 0xe0000000-0xe3ffffff could not be reserved system 00:0b: iomem range 0xcd200-0xcffff has been reserved system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved system 00:0b: iomem range 0xfc000-0xfffff could not be reserved system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfed10000-0xfed1dfff could not be reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0b: iomem range 0xffb00000-0xffb7ffff could not be reserved system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0b: iomem range 0xe0000-0xeffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x1000-0x1fff pci 0000:00:01.0: MEM window: 0x98000000-0x9affffff pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x00000097ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: 0x2000-0x2fff pci 0000:00:1c.3: MEM window: 0x9b000000-0x9b0fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: 0x3000-0x3fff pci 0000:00:1c.4: MEM window: 0x9b100000-0x9b1fffff pci 0000:00:1c.4: PREFETCH window: 0x0000009b200000-0x0000009b2fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: 0x0000009b300000-0x0000009b3fffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [1000, 1fff] bus: 01 index 1 mmio: [98000000, 9affffff] bus: 01 index 2 mmio: [80000000, 97ffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [9000, 9fff] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [9b000000, 9b0fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [3000, 3fff] bus: 04 index 1 mmio: [9b100000, 9b1fffff] bus: 04 index 2 mmio: [9b200000, 9b2fffff] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [0, 0] bus: 05 index 2 mmio: [9b300000, 9b3fffff] bus: 05 index 3 io port: [0, ffff] bus: 05 index 4 mmio: [0, ffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 1748 io scheduler noop registered (default) io scheduler cfq registered pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 uvesafb: NVIDIA Corporation, G84 Board - p403h05 - p403h05 , Chip Rev , OEM: NVIDIA, VBE v3.0 uvesafb: protected mode interface info at c000:b6e0 uvesafb: pmi: set display start = c00cb743, set palette = c00cb79e uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da uvesafb: VBIOS/hardware doesn't support DDC transfers uvesafb: no monitor limits have been set, default refresh rate will be used uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=2867 uvesafb: cannot reserve video memory at 0xff0000 uvesafb: probe of uvesafb.0 failed with error -5 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: SSDT 7FEE7F00, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FEE83C0, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: no MSI. Back to INTx. eth0: RTL8168b/8111b at 0xf8828000, 00:1d:7d:9d:60:30, XID 38000000 IRQ 16 Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:03:00.0: version 3.0 ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:03:00.0: setting latency timer to 64 scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 abar m8192@0x9b000000 port 0x9b000100 irq 19 ata2: SATA max UDMA/133 abar m8192@0x9b000000 port 0x9b000180 irq 19 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x4420 ctl 0x4440 bmdma 0x40e0 irq 19 ata4: SATA max UDMA/133 cmd 0x4428 ctl 0x4444 bmdma 0x40e8 irq 19 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: HPA detected: current 976771055, native 976773168 ata4.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133 ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 2:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg0 type 5 scsi 3:0:0:0: Direct-Access ATA ST3500641AS 3.AA PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 3:0:0:0: [sda] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg1 type 0 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: SATA max UDMA/133 cmd 0x4430 ctl 0x4448 bmdma 0x4400 irq 19 ata6: SATA max UDMA/133 cmd 0x4438 ctl 0x444c bmdma 0x4408 irq 19 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ieee1394: raw1394: /dev/raw1394 device initialized NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead. ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0x9b404000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x9b404400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00004020 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004040 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004060 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 4-1: configuration #1 chosen from 1 choice uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 4-2: new low speed USB device using uhci_hcd and address 3 Initializing USB Mass Storage driver... usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1 input: BTC USB Multimedia Keyboard as /class/input/input3 input: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.1-2 input: BTC USB Multimedia Keyboard as /class/input/input4 input: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.1-2 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA device list: #0: HDA Intel at 0x9b400000 irq 22 Netfilter messages via NETLINK v0.30. ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. Starting balanced_irq Using IPI No-Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 276k freed Bt87x 0000:05:00.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 bt87x0: Using board 1, analog, digital (rate 32000 Hz) bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 20, latency: 32, mmio: 0x9b300000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 1-0050: Hauppauge model 44354, rev B121, serial# 2146188 tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 1-0050: audio processor is MSP3415 (idx 6) tveeprom 1-0050: has radio bttv0: Hauppauge eeprom indicates model#44354 bttv0: tuner type=5 bttv0: i2c: checking for MSP34xx @ 0x80... found msp3400' 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) msp3400' 1-0040: msp3400 supports nicam, mode is autodetect bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found nvidia: module license 'NVIDIA' taints kernel. tuner' 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner-simple 1-0061: creating new instance tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008 EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 7815612k swap on /dev/sda2. Priority:-1 extents:1 across:7815612k r8169: eth0: link up r8169: eth0: link up