igor Password: Last login: Sat Dec 6 18:05:47 EET 2008 from 192.168.0.100 on pts/0 igor@Avalon ~ $ sudo reboot  Broadcast message from root [0 * Stopping local ... [ ok ] * Stopping vixie-cron ... [ ok ] * Saving random seed ... [ ok ] * Stopping sshd ... [ ok ] * Stopping ntpd ... [ ok ] * Storing ALSA Mixer Levels ... [ ok ] * Killing processes using ALSA ... [ ok ] * Unloading ALSA modules ... [ ok ] * Stopping xdm .../sbin/start-stop-daemon: stat /usr/bin/xdm: No such file or directory (No such file or directory) [ ok ] * Unmounting network filesystems ... [ ok ] * Stopping eth0 * Bringing down eth0 * Shutting down eth0 ... [ ok ] * Stopping lo * Bringing down lo * Shutting down lo ... [ ok ] * Stopping syslog-ng ... [ ok ] * Setting hardware clock using the system clock [Local Time] ... [ ok ] * Deactivating swap ... [ ok ] * Unmounting filesystems ... [ ok ] * Removing dm-crypt mappings * Shutting down the Logical Volume Manager * Finished Shutting down the Logical Volume Manager * Shutting down RAID devices (mdadm) ... [ ok ] * Remounting remaining filesystems readonly ... [ ok ] Restarting system. Linux version 2.6.26-gentoo-r3 (root@Avalon) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Mon Nov 24 20:28:44 EET 2008 Command line: root=/dev/hdb3 console=tty0 console=ttyS0,9600 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) max_pfn_mapped = 1048576 init_memory_mapping DMI 2.4 present. Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007fee0000 Bootmem setup node 0 0000000000000000-000000007fee0000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000c000 - 000000000001bfdf] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-814b8b] TEXT DATA BSS early res: 3 [9f000-fffff] BIOS reserved early res: 4 [8000-bfff] PGTABLE Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524000 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: OEM00000 Product ID: PROD00000000 <6>MPTABLE: Product ID: PROD00000000 <6>MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 I/O APIC #2 Version 17 at 0xFEC00000. Setting APIC routing to flat Processors: 2 Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 35120 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 515076 Policy zone: DMA32 Kernel command line: root=/dev/hdb3 console=tty0 console=ttyS0,9600 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PIT Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2211.362 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Checking aperture... Node 0: aperture @ e220000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2060212k/2096000k available (3167k kernel code, 35400k reserved, 1797k data, 336k init) Calibrating delay using timer specific routine.. 4425.42 BogoMIPS (lpj=8850845) Security Framework initialized Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ExtINT not setup in hardware but reported by MP table CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Using local APIC timer interrupts. Detected 12.564 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4422.85 BogoMIPS (lpj=8845702) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (8848.27 BogoMIPS). net_namespace: 568 bytes NET: Registered protocol family 16 TOM: 0000000080000000 aka 2048M PCI: Using configuration type 1 for base access SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Transparent bridge - 0000:00:09.0 PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 3 PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 3 PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 3 PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000080000000-0x00000000800fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: 0xfa000000-0xfcffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Total HugeTLB memory allocated, 0 fuse init (API version 7.9) msgmni has been set to 4023 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:7e:24:64 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:01:06.0: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.28 eth1: RealTek RTL8139 at 0xffffc2000088c000, 00:13:f7:1a:94:2c, IRQ 5 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Clocksource tsc unstable (delta = 632865723 ns) NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf2) at PCI slot 0000:00:06.0 NFORCE-CK804: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe800-0xe807 ide1: BM-DMA at 0xe808-0xe80f hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive hdb: Maxtor 7Y250P0, ATA DISK drive hda: UDMA/66 mode selected hdb: UDMA/133 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 isa bounce pool size: 16 pages ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hdb: max request size: 512KiB hdb: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63 hdb: cache flushes supported hdb: hdb1 hdb3 hdb4 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 5 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 5 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: qc timeout (cmd 0x27) ata1.00: failed to read native max address (err_mask=0x4) ata1.00: HPA support seems broken, skipping HPA handling ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata1: limiting SATA link speed to 1.5 Gbps ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: limiting speed to UDMA/100:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: limiting speed to UDMA/33:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense information end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense information end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 ata1: EH complete unable to read partition table sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 11 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 11 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) irq 5: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.26-gentoo-r3 #2 Call Trace: [] nv_do_interrupt+0x2e/0x4d [] __report_bad_irq+0x30/0x72 [] note_interrupt+0x207/0x247 [] handle_fasteoi_irq+0xa5/0xc8 [] do_IRQ+0xf1/0x162 [] default_idle+0x0/0x3b [] ret_from_intr+0x0/0xa [] default_idle+0x27/0x3b [] cpu_idle+0x6d/0x8b handlers: [] (nv_ck804_interrupt+0x0/0x2b) Disabling IRQ #5 ata4.00: qc timeout (cmd 0x27) ata4.00: failed to read native max address (err_mask=0x4) ata4.00: HPA support seems broken, skipping HPA handling ata4: failed to recover some devices, retrying in 5 secs ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<3>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: configured for UDMA/133 ata4: EH complete ata4: limiting SATA link speed to 1.5 Gbps ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/133 ata4: EH complete ata4.00: limiting speed to UDMA/100:PIO4 ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/100 ata4: EH complete ata4.00: limiting speed to UDMA/33:PIO4 ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 sd 3:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 3:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 3:0:0:0: [sdb] Add. Sense: No additional sense information end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 ata4: EH complete ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x100000 action 0x6 frozen ata4: SError: { Dispar } ata4.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/33 sd 3:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 3:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 3:0:0:0: [sdb] Add. Sense: No additional sense information end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 ata4: EH complete unable to read partition table sd 3:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg1 type 0 ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: irq 5, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 3, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid1 personality registered for level 1 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16. intel8x0_measure_ac97_clock: measured 56000 usecs intel8x0: clocking to 48000 ALSA device list: #0: NVidia CK804 with ALC850 at irq 11 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. registered taskstats version 1 md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 336k freed INIT: version 2.86 booting Gentoo Linux; http://www.gentoo.org/ Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2 Press I to enter interactive boot mode * Mounting proc at /proc ... [ ok ] * Mounting sysfs at /sys ... [ ok ] * Mounting /dev ... [ ok ] * Starting udevd ... [ ok ] * Populating /dev with existing devices through uevents ...udevd[1060]: main: the kernel does not support inotify, udevd can't monitor rules file changes [ ok ] * Waiting for uevents to be processed ...Disabling IRQ #5 [ !! ]