[ 0.000000] Linux version 2.6.27-gentoo-r4 (root@HeraGentoo) (gcc version 4.3.2 (Gentoo 4.3.2 p1.0) ) #4 SMP Sun Nov 30 00:21:36 CET 2008 [ 0.000000] Command line: root=/dev/sda8 video=vesafb:ywrap,mtrr vga=791 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfed0000 page 4k [ 0.000000] kernel direct mapping tables up to bfed0000 @ 8000-d000 [ 0.000000] last_map_addr: bfed0000 end: bfed0000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] last_map_addr: 140000000 end: 140000000 [ 0.000000] ACPI: RSDP 000F8130, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BFEDB1BE, 0084 (r1 Sony VAIO 20080226 PTL 0) [ 0.000000] ACPI: FACP BFEE1C04, 00F4 (r3 Sony VAIO 20080226 PTL 1) [ 0.000000] ACPI: DSDT BFEDC5D9, 55B7 (r2 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: FACS BFEE2FC0, 0040 [ 0.000000] ACPI: APIC BFEE1CF8, 0068 (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: HPET BFEE1D60, 0038 (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: MCFG BFEE1D98, 003C (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: SLIC BFEE1DD4, 0176 (r1 Sony VAIO 20080226 PTL 1000000) [ 0.000000] ACPI: TMOR BFEE1F4A, 0026 (r1 Sony VAIO 20080226 PTL 3) [ 0.000000] ACPI: APIC BFEE1F70, 0068 (r1 Sony VAIO 20080226 PTL 0) [ 0.000000] ACPI: BOOT BFEE1FD8, 0028 (r1 Sony VAIO 20080226 PTL 1) [ 0.000000] ACPI: SSDT BFEDC33D, 029C (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB82A, 0287 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB776, 00B4 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB242, 0534 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Sony [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000777c08] TEXT DATA BSS ==> [0000200000 - 0000777c08] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #5 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f81b0] 000f81b0 [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 2439 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 767752 pages, LIFO batch:31 [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 41568 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028751 [ 0.000000] Kernel command line: root=/dev/sda8 video=vesafb:ywrap,mtrr vga=791 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2094.699 MHz processor. [ 0.000999] Console: colour dummy device 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000999] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.000999] Memory: 4042112k/5242880k available (3463k kernel code, 149676k reserved, 1318k data, 352k init) [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.000999] hpet clockevent registered [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.39 BogoMIPS (lpj=2094699) [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] CPU0: Thermal monitoring enabled (TM2) [ 0.000999] using mwait in idle threads. [ 0.000999] Freeing SMP alternatives: 28k freed [ 0.000999] ACPI: Core revision 20080609 [ 0.006949] Parsing all Control Methods: [ 0.007091] Table [DSDT](id 0001) - 822 Objects with 63 Devices 226 Methods 26 Regions [ 0.007211] Parsing all Control Methods: [ 0.007337] Table [SSDT](id 0002) - 12 Objects with 3 Devices 6 Methods 0 Regions [ 0.007433] Parsing all Control Methods: [ 0.007560] Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions [ 0.007603] Parsing all Control Methods: [ 0.007730] Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions [ 0.007915] Parsing all Control Methods: [ 0.008055] Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions [ 0.008060] tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired [ 0.009015] evxfevnt-0091 [00] enable : Transition to ACPI mode successful [ 0.010259] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020273] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.020277] Using local APIC timer interrupts. [ 0.021000] APIC timer calibration result 12468459 [ 0.021002] Detected 12.468 MHz APIC timer. [ 0.021096] Booting processor 1/1 ip 6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4189.28 BogoMIPS (lpj=2094643) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.093241] CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.093275] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.094014] Brought up 2 CPUs [ 0.094017] Total of 2 processors activated (8378.68 BogoMIPS). [ 0.094248] net_namespace: 800 bytes [ 0.094365] NET: Registered protocol family 16 [ 0.094600] No dock devices found. [ 0.094606] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.094610] ACPI: bus type pci registered [ 0.094689] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.094693] PCI: MCFG area at e0000000 reserved in E820 [ 0.100591] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.100594] PCI: Using configuration type 1 for base access [ 0.102297] evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 0.102367] ACPI: EC: Look up EC in DSDT [ 0.108317] Completing Region/Field/Buffer/Package initialization:........................................................................... [ 0.109331] Initialized 24/26 Regions 3/3 Fields 28/28 Buffers 20/20 Packages (867 nodes) [ 0.109336] Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.110051] ... [ 0.110656] Executed 3 _INI methods requiring 0 _STA executions (examined 72 objects) [ 0.110799] evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 3 Runtime GPEs in this block [ 0.110822] ACPI: Interpreter enabled [ 0.110824] ACPI: (supports S0 S5) [ 0.110831] ACPI: Using IOAPIC for interrupt routing [ 0.111099] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.128311] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.133842] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.133846] ACPI: EC: driver started in interrupt mode [ 0.133885] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.133982] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.133986] pci 0000:00:01.0: PME# disabled [ 0.134119] PCI: 0000:00:1a.0 reg 20 io port: [1800, 181f] [ 0.134239] PCI: 0000:00:1a.1 reg 20 io port: [1820, 183f] [ 0.134362] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc304800, fc304bff] [ 0.134480] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.134488] pci 0000:00:1a.7: PME# disabled [ 0.134564] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc300000, fc303fff] [ 0.134653] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.134661] pci 0000:00:1b.0: PME# disabled [ 0.134731] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.134738] pci 0000:00:1c.0: PME# disabled [ 0.134830] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.134837] pci 0000:00:1c.1: PME# disabled [ 0.134907] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.134915] pci 0000:00:1c.2: PME# disabled [ 0.135011] PCI: 0000:00:1d.0 reg 20 io port: [1840, 185f] [ 0.135124] PCI: 0000:00:1d.1 reg 20 io port: [1860, 187f] [ 0.135216] PCI: 0000:00:1d.2 reg 20 io port: [1880, 189f] [ 0.135352] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc304c00, fc304fff] [ 0.135458] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.135466] pci 0000:00:1d.7: PME# disabled [ 0.135674] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.135682] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.135737] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] [ 0.135751] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] [ 0.135764] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] [ 0.135778] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] [ 0.135787] PCI: 0000:00:1f.1 reg 20 io port: [18a0, 18af] [ 0.135900] PCI: 0000:00:1f.2 reg 10 io port: [18f0, 18f7] [ 0.135916] PCI: 0000:00:1f.2 reg 14 io port: [18e8, 18eb] [ 0.135924] PCI: 0000:00:1f.2 reg 18 io port: [18e0, 18e7] [ 0.135933] PCI: 0000:00:1f.2 reg 1c io port: [18b4, 18b7] [ 0.135944] PCI: 0000:00:1f.2 reg 20 io port: [18c0, 18df] [ 0.135952] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc304000, fc3047ff] [ 0.135985] pci 0000:00:1f.2: PME# supported from D3hot [ 0.135994] pci 0000:00:1f.2: PME# disabled [ 0.136036] PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff] [ 0.136060] PCI: 0000:00:1f.3 reg 20 io port: [1c00, 1c1f] [ 0.136180] PCI: 0000:01:00.0 reg 10 32bit mmio: [ce000000, ceffffff] [ 0.136197] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff] [ 0.136214] PCI: 0000:01:00.0 reg 1c 64bit mmio: [cc000000, cdffffff] [ 0.136227] PCI: 0000:01:00.0 reg 24 io port: [2000, 207f] [ 0.136236] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.136336] PCI: bridge 0000:00:01.0 io port: [2000, 2fff] [ 0.136339] PCI: bridge 0000:00:01.0 32bit mmio: [cc000000, ceffffff] [ 0.136342] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] [ 0.136775] PCI: 0000:02:00.0 reg 10 64bit mmio: [f6000000, f6003fff] [ 0.136827] PCI: 0000:02:00.0 reg 18 io port: [3000, 30ff] [ 0.137024] PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.137173] pci 0000:02:00.0: supports D1 [ 0.137174] pci 0000:02:00.0: supports D2 [ 0.137176] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137201] pci 0000:02:00.0: PME# disabled [ 0.137248] PCI: bridge 0000:00:1c.0 io port: [3000, 3fff] [ 0.137256] PCI: bridge 0000:00:1c.0 32bit mmio: [f6000000, f7ffffff] [ 0.137272] PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff] [ 0.137340] PCI: bridge 0000:00:1c.1 io port: [4000, 4fff] [ 0.137346] PCI: bridge 0000:00:1c.1 32bit mmio: [f8000000, f9ffffff] [ 0.137354] PCI: bridge 0000:00:1c.1 64bit mmio pref: [f2000000, f3ffffff] [ 0.137476] PCI: 0000:06:00.0 reg 10 64bit mmio: [fa000000, fa001fff] [ 0.137587] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.137600] pci 0000:06:00.0: PME# disabled [ 0.137659] PCI: bridge 0000:00:1c.2 io port: [5000, 5fff] [ 0.137667] PCI: bridge 0000:00:1c.2 32bit mmio: [fa000000, fbffffff] [ 0.137676] PCI: bridge 0000:00:1c.2 64bit mmio pref: [f4000000, f5ffffff] [ 0.137754] PCI: 0000:08:03.0 reg 10 32bit mmio: [fc004000, fc004fff] [ 0.137785] pci 0000:08:03.0: supports D1 [ 0.137786] pci 0000:08:03.0: supports D2 [ 0.137788] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137796] pci 0000:08:03.0: PME# disabled [ 0.137851] PCI: 0000:08:03.1 reg 10 32bit mmio: [fc006000, fc0067ff] [ 0.137864] PCI: 0000:08:03.1 reg 14 32bit mmio: [fc000000, fc003fff] [ 0.137956] pci 0000:08:03.1: supports D1 [ 0.137957] pci 0000:08:03.1: supports D2 [ 0.137958] pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137967] pci 0000:08:03.1: PME# disabled [ 0.138041] PCI: 0000:08:03.2 reg 10 32bit mmio: [fc005000, fc005fff] [ 0.138133] pci 0000:08:03.2: supports D1 [ 0.138135] pci 0000:08:03.2: supports D2 [ 0.138136] pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot [ 0.138145] pci 0000:08:03.2: PME# disabled [ 0.138220] pci 0000:00:1e.0: transparent bridge [ 0.138229] PCI: bridge 0000:00:1e.0 io port: [f000, ffff] [ 0.138235] PCI: bridge 0000:00:1e.0 32bit mmio: [fc000000, fc0fffff] [ 0.138310] bus 00 -> node 0 [ 0.138316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.138626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.138751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.138873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.138994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.139135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.165120] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.165233] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.165344] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.165455] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.165565] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.165677] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.165787] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.165899] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.166185] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.166212] pnp: PnP ACPI init [ 0.166219] ACPI: bus type pnp registered [ 0.174028] pnp 00:06: io resource (0xfe00-0xfe7f) overlaps 0000:00:1e.0 BAR 7 (0xf000-0xffff), disabling [ 0.174034] pnp 00:06: io resource (0xfe80-0xfeff) overlaps 0000:00:1e.0 BAR 7 (0xf000-0xffff), disabling [ 0.174262] pnp: PnP ACPI: found 10 devices [ 0.174265] ACPI: ACPI bus type pnp unregistered [ 0.174389] SCSI subsystem initialized [ 0.174423] libata version 3.00 loaded. [ 0.174514] usbcore: registered new interface driver usbfs [ 0.174542] usbcore: registered new interface driver hub [ 0.174575] usbcore: registered new device driver usb [ 0.174680] PCI: Using ACPI for IRQ routing [ 0.182018] PCI-GART: No AMD northbridge found. [ 0.182027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.182032] hpet0: 3 64-bit timers, 14318180 Hz [ 0.183254] ACPI: RTC can wake from S4 [ 0.188011] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.188016] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.188020] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.188024] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.188028] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.188032] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.188036] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 0.188040] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.188049] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.188052] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.188055] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.188059] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.188062] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.192774] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 0.192779] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.192783] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.192787] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff [ 0.192791] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.192797] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.192803] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.192812] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff [ 0.192819] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.192830] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.192836] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.192844] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff [ 0.192852] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.192862] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 0.192868] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.192877] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff [ 0.192885] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff [ 0.192898] pci 0000:08:03.0: CardBus bridge, secondary bus 0000:09 [ 0.192901] pci 0000:08:03.0: IO window: 0x00f000-0x00f0ff [ 0.192909] pci 0000:08:03.0: IO window: 0x00f400-0x00f4ff [ 0.192917] pci 0000:08:03.0: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.192925] pci 0000:08:03.0: MEM window: 0xc8000000-0xcbffffff [ 0.192933] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.192939] pci 0000:00:1e.0: IO window: 0xf000-0xffff [ 0.192948] pci 0000:00:1e.0: MEM window: 0xfc000000-0xfc0fffff [ 0.192955] pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000c7ffffff [ 0.192973] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.192977] pci 0000:00:01.0: setting latency timer to 64 [ 0.192987] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.192992] pci 0000:00:1c.0: setting latency timer to 64 [ 0.193007] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.193015] pci 0000:00:1c.1: setting latency timer to 64 [ 0.193030] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.193035] pci 0000:00:1c.2: setting latency timer to 64 [ 0.193051] pci 0000:00:1e.0: setting latency timer to 64 [ 0.193068] pci 0000:08:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.193077] bus: 00 index 0 io port: [0, ffff] [ 0.193080] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.193083] bus: 01 index 0 io port: [2000, 2fff] [ 0.193085] bus: 01 index 1 mmio: [cc000000, ceffffff] [ 0.193088] bus: 01 index 2 mmio: [d0000000, dfffffff] [ 0.193090] bus: 01 index 3 mmio: [0, 0] [ 0.193093] bus: 02 index 0 io port: [3000, 3fff] [ 0.193095] bus: 02 index 1 mmio: [f6000000, f7ffffff] [ 0.193098] bus: 02 index 2 mmio: [f0000000, f1ffffff] [ 0.193100] bus: 02 index 3 mmio: [0, 0] [ 0.193102] bus: 04 index 0 io port: [4000, 4fff] [ 0.193105] bus: 04 index 1 mmio: [f8000000, f9ffffff] [ 0.193107] bus: 04 index 2 mmio: [f2000000, f3ffffff] [ 0.193110] bus: 04 index 3 mmio: [0, 0] [ 0.193112] bus: 06 index 0 io port: [5000, 5fff] [ 0.193115] bus: 06 index 1 mmio: [fa000000, fbffffff] [ 0.193117] bus: 06 index 2 mmio: [f4000000, f5ffffff] [ 0.193120] bus: 06 index 3 mmio: [0, 0] [ 0.193122] bus: 08 index 0 io port: [f000, ffff] [ 0.193124] bus: 08 index 1 mmio: [fc000000, fc0fffff] [ 0.193127] bus: 08 index 2 mmio: [c4000000, c7ffffff] [ 0.193129] bus: 08 index 3 io port: [0, ffff] [ 0.193132] bus: 08 index 4 mmio: [0, ffffffffffffffff] [ 0.193134] bus: 09 index 0 io port: [f000, f0ff] [ 0.193137] bus: 09 index 1 io port: [f400, f4ff] [ 0.193139] bus: 09 index 2 mmio: [c4000000, c7ffffff] [ 0.193142] bus: 09 index 3 mmio: [c8000000, cbffffff] [ 0.193164] NET: Registered protocol family 2 [ 0.203044] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.203494] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.205350] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.205905] TCP: Hash tables configured (established 262144 bind 65536) [ 0.205909] TCP reno registered [ 0.208093] NET: Registered protocol family 1 [ 0.208289] Simple Boot Flag at 0x36 set to 0x1 [ 0.208825] IA-32 Microcode Update Driver: v1.14a [ 0.209459] NTFS driver 2.1.29 [Flags: R/O]. [ 0.209491] msgmni has been set to 7896 [ 0.209556] io scheduler noop registered [ 0.209559] io scheduler anticipatory registered [ 0.209561] io scheduler deadline registered [ 0.209571] io scheduler cfq registered (default) [ 0.209782] pci 0000:01:00.0: Boot video device [ 0.209878] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.209906] pcieport-driver 0000:00:01.0: found MSI capability [ 0.209935] pci_express 0000:00:01.0:pcie00: allocate port service [ 0.209963] pci_express 0000:00:01.0:pcie02: allocate port service [ 0.209989] pci_express 0000:00:01.0:pcie03: allocate port service [ 0.210070] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.210127] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.210188] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.210214] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.210239] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.210380] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.210429] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.210504] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.210529] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.210554] pci_express 0000:00:1c.1:pcie03: allocate port service [ 0.210700] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.210752] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.210827] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.210853] pci_express 0000:00:1c.2:pcie02: allocate port service [ 0.210879] pci_express 0000:00:1c.2:pcie03: allocate port service [ 0.213104] hpet_resources: 0xfed00000 is busy [ 0.213144] Linux agpgart interface v0.103 [ 0.213148] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 0.213152] Hangcheck: Using get_cycles(). [ 0.213312] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 3072k, total 14336k [ 0.213317] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.213320] vesafb: scrolling: redraw [ 0.213323] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.237471] Console: switching to colour frame buffer device 128x48 [ 0.259713] fb0: VESA VGA frame buffer device [ 0.261430] ACPI: AC Adapter [ADP1] (on-line) [ 0.500284] Switched to high resolution mode on CPU 1 [ 0.500990] Switched to high resolution mode on CPU 0 [ 0.776253] ACPI: EC: missing confirmations, switch off interrupt mode. [ 0.801221] ACPI: Battery Slot [BAT0] (battery present) [ 0.801613] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.803432] ACPI: Lid Switch [LID0] [ 0.803645] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.816014] ACPI: Power Button (CM) [PWRB] [ 0.818179] ACPI: SSDT BFEDBFFA, 025F (r1 Sony VAIO 20080226 PTL 20050624) [ 0.818592] Parsing all Control Methods: [ 0.818916] Table [SSDT](id 0098) - 6 Objects with 0 Devices 3 Methods 0 Regions [ 0.819490] ACPI: SSDT BFEDBAB1, 04B7 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.819874] Parsing all Control Methods: [ 0.820202] Table [SSDT](id 0099) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 0.822803] Monitor-Mwait will be used to enter C-1 state [ 0.822806] Monitor-Mwait will be used to enter C-2 state [ 0.822808] Monitor-Mwait will be used to enter C-3 state [ 0.822836] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.823166] processor ACPI0007:00: registered as cooling_device0 [ 0.823443] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.824204] ACPI: SSDT BFEDC259, 00E4 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.829589] Parsing all Control Methods: [ 0.829914] Table [SSDT](id 00A7) - 4 Objects with 0 Devices 4 Methods 0 Regions [ 0.841070] ACPI: SSDT BFEDBF68, 0092 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.847183] Parsing all Control Methods: [ 0.847508] Table [SSDT](id 00A8) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 0.861025] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.867836] processor ACPI0007:01: registered as cooling_device1 [ 0.874817] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.885152] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.895555] ACPI: Thermal Zone [TZ00] (52 C) [ 0.904870] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.915603] ACPI: Thermal Zone [TZ01] (52 C) [ 0.923554] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 0.933059] brd: module loaded [ 0.941792] loop: module loaded [ 0.950248] console [netcon0] enabled [ 0.958770] netconsole: network logging started [ 0.967487] Uniform Multi-Platform E-IDE driver [ 0.976414] piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) [ 0.985604] pci 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.995045] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 1.004705] ide0: BM-DMA at 0x18a0-0x18a7 [ 1.014497] ide1: BM-DMA at 0x18a8-0x18af [ 1.024294] Probing IDE interface ide0... [ 1.696458] hda: Optiarc BD ROM BC-5500A, ATAPI CD/DVD-ROM drive [ 2.318291] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.318407] hda: UDMA/33 mode selected [ 2.328307] Probing IDE interface ide1... [ 2.847301] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.859255] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.869039] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.878970] ide_generic: I/O resource 0x1F0-0x1F7 not free. [ 2.888704] ide_generic: I/O resource 0x170-0x177 not free. [ 2.898705] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 2.908174] Uniform CD-ROM driver Revision: 3.20 [ 2.919402] Driver 'sd' needs updating - please use bus_type methods [ 2.928712] Driver 'sr' needs updating - please use bus_type methods [ 2.937838] ahci 0000:00:1f.2: version 3.0 [ 2.937849] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.947033] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 2.956155] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 2.965232] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.965419] scsi0 : ahci [ 2.974343] scsi1 : ahci [ 2.983017] scsi2 : ahci [ 2.991541] ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 315 [ 3.000236] ata2: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 315 [ 3.008724] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304200 irq 315 [ 3.321269] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.329984] ACPI Error (psargs-0358): [SMS_] Namespace lookup failure, AE_NOT_FOUND [ 3.338290] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SATA.PRT0._SDD] (Node ffff88013f85a330), AE_NOT_FOUND [ 3.355206] ata1.00: ACPI _SDD failed (AE 0x5) [ 8.992015] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9.000970] ACPI Error (psargs-0358): [SMS_] Namespace lookup failure, AE_NOT_FOUND [ 9.009579] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SATA.PRT0._SDD] (Node ffff88013f85a330), AE_NOT_FOUND [ 9.027183] ata1.00: ACPI _SDD failed (AE 0x5) [ 9.035983] ata1.00: ACPI: failed the second time, disabled [ 9.045517] ata1.00: configured for UDMA/100 [ 9.370266] ata2: SATA link down (SStatus 0 SControl 300) [ 9.694265] ata3: SATA link down (SStatus 0 SControl 300) [ 9.713324] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2300B 0041 PQ: 0 ANSI: 5 [ 9.722353] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 9.731348] sd 0:0:0:0: [sda] Write Protect is off [ 9.740265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.740282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.749429] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 9.758494] sd 0:0:0:0: [sda] Write Protect is off [ 9.767426] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.767443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.776549] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 10.216331] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.225604] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.234943] Yenta: CardBus bridge found at 0000:08:03.0 [104d:9016] [ 10.244281] Yenta: Enabling burst memory read transactions [ 10.253716] Yenta: Using CSCINT to route CSC interrupts to PCI [ 10.262988] Yenta: Routing CardBus interrupts to PCI [ 10.272102] Yenta TI: socket 0000:08:03.0, mfunc 0x011b1b22, devctl 0x64 [ 10.505818] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 10.515113] Socket status: 30000006 [ 10.524241] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c [ 10.533561] pcmcia: parent PCI bridge I/O window: 0xf000 - 0xffff [ 10.543056] pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfc0fffff [ 10.552498] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc7ffffff [ 10.562013] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 10.574861] i8042.c: Detected active multiplexing controller, rev 1.1. [ 10.587644] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.597112] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 10.606680] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 10.616030] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 10.625371] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 10.634781] mice: PS/2 mouse device common for all mice [ 10.856884] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 10.879543] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 10.888945] rtc0: alarms up to one month, y3k, hpet irqs [ 10.898197] cpuidle: using governor ladder [ 10.901254] Marking TSC unstable due to TSC halts in idle [ 10.916460] TCP cubic registered [ 10.925405] NET: Registered protocol family 10 [ 10.934565] IPv6 over IPv4 tunneling driver [ 10.943277] NET: Registered protocol family 17 [ 11.466545] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa04000 [ 11.501021] Clocksource tsc unstable (delta = -399809764 ns) [ 11.516570] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3 [ 11.567304] kjournald starting. Commit interval 5 seconds [ 11.578975] EXT3-fs: mounted filesystem with ordered data mode. [ 11.590564] VFS: Mounted root (ext3 filesystem) readonly. [ 11.602052] Freeing unused kernel memory: 352k freed [ 15.454649] USB Universal Host Controller Interface driver v3.0 [ 15.454710] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.454727] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 15.454734] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 15.454784] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 15.454826] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 15.454954] usb usb1: configuration #1 chosen from 1 choice [ 15.454989] hub 1-0:1.0: USB hub found [ 15.454997] hub 1-0:1.0: 2 ports detected [ 15.514868] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 15.540421] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 15.555576] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 15.555593] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 15.555600] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 15.555633] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 15.556784] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 15.556913] usb usb2: configuration #1 chosen from 1 choice [ 15.556950] hub 2-0:1.0: USB hub found [ 15.556958] hub 2-0:1.0: 2 ports detected [ 15.657595] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 15.657616] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 15.657623] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 15.657654] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 15.661582] ehci_hcd 0000:00:1a.7: debug port 1 [ 15.661592] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 15.661616] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304800 [ 15.671306] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.671394] usb usb3: configuration #1 chosen from 1 choice [ 15.671428] hub 3-0:1.0: USB hub found [ 15.671437] hub 3-0:1.0: 4 ports detected [ 15.873504] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 15.873518] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 15.873525] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.873569] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 15.873625] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 15.873740] usb usb4: configuration #1 chosen from 1 choice [ 15.873774] hub 4-0:1.0: USB hub found [ 15.873783] hub 4-0:1.0: 2 ports detected [ 15.939106] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 15.939109] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 15.975285] usb 3-2: new high speed USB device using ehci_hcd and address 2 [ 16.075539] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 16.075555] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 16.075562] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.075596] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 16.075656] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 16.075767] usb usb5: configuration #1 chosen from 1 choice [ 16.075804] hub 5-0:1.0: USB hub found [ 16.075812] hub 5-0:1.0: 2 ports detected [ 16.093285] usb 3-2: configuration #1 chosen from 1 choice [ 16.176534] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 16.176550] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 16.176557] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.176595] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 16.176637] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 16.176750] usb usb6: configuration #1 chosen from 1 choice [ 16.176783] hub 6-0:1.0: USB hub found [ 16.176791] hub 6-0:1.0: 2 ports detected [ 16.277636] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 16.277660] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 16.277665] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 16.277703] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 16.281641] ehci_hcd 0000:00:1d.7: debug port 1 [ 16.281655] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 16.281665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304c00 [ 16.291315] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.291415] usb usb7: configuration #1 chosen from 1 choice [ 16.291450] hub 7-0:1.0: USB hub found [ 16.291459] hub 7-0:1.0: 6 ports detected [ 16.495186] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.495224] sky2 0000:02:00.0: setting latency timer to 64 [ 16.495329] sky2 0000:02:00.0: v1.22 addr 0xf6000000 irq 16 Yukon-2 EC Ultra rev 3 [ 16.496312] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.496348] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.497140] sky2 eth0: addr 00:1a:80:fc:05:0d [ 16.510162] udev: renamed network interface eth0 to eth1 [ 16.910301] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 17.052853] usb 4-2: configuration #1 chosen from 1 choice [ 17.193163] nvidia: module license 'NVIDIA' taints kernel. [ 17.469953] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input5 [ 17.518292] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x208b2000 [ 17.519349] input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.0-2 [ 17.519373] usbcore: registered new interface driver usbhid [ 17.519377] usbhid: v2.6:USB HID core driver [ 17.585342] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 17.585667] ohci1394 0000:08:03.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.592415] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 17.592455] iwlagn 0000:06:00.0: setting latency timer to 64 [ 17.592509] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 17.636679] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fc006000-fc0067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 17.640613] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 17.640894] iwlagn 0000:06:00.0: PCI INT A disabled [ 17.641462] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 17.643205] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.643218] nvidia 0000:01:00.0: setting latency timer to 64 [ 17.643324] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008 [ 18.893880] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302bc5efe] [ 19.487889] EXT3 FS on sda8, internal journal [ 19.692540] kjournald starting. Commit interval 5 seconds [ 19.692858] EXT3 FS on sda7, internal journal [ 19.692865] EXT3-fs: mounted filesystem with ordered data mode. [ 22.390346] sky2 eth1: enabling interface [ 22.395098] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 22.631844] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 22.631955] iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 22.632233] firmware: requesting iwlwifi-4965-2.ucode [ 22.915736] Registered led device: iwl-phy0:radio [ 22.915757] Registered led device: iwl-phy0:assoc [ 22.915776] Registered led device: iwl-phy0:RX [ 22.915797] Registered led device: iwl-phy0:TX [ 22.928382] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.725441] wlan0: authenticate with AP 00:80:5a:4b:7f:e4 [ 23.727210] wlan0: authenticated [ 23.727214] wlan0: associate with AP 00:80:5a:4b:7f:e4 [ 23.736378] wlan0: RX AssocResp from 00:80:5a:4b:7f:e4 (capab=0x411 status=0 aid=1) [ 23.736383] wlan0: associated [ 23.745121] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 34.328297] wlan0: no IPv6 routers present [ 72.771144] CE: hpet increasing min_delta_ns to 15000 nsec [ 82.591066] CE: hpet increasing min_delta_ns to 22500 nsec [ 93.264314] CE: hpet increasing min_delta_ns to 33750 nsec [ 100.421444] CE: hpet increasing min_delta_ns to 50624 nsec [ 101.784174] CE: hpet increasing min_delta_ns to 75936 nsec [ 159.034762] CE: hpet increasing min_delta_ns to 113904 nsec