[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Linux version 2.6.28-rc5-git4 (root@HeraGentoo) (gcc version 4.3.2 (Gentoo 4.3.2 p1.0) ) #1 SMP Sun Nov 30 00:02:07 CET 2008 [ 0.000000] Command line: root=/dev/sda8 video=vesafb:ywrap,mtrr vga=791 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfed0000 page 4k [ 0.000000] kernel direct mapping tables up to bfed0000 @ 10000-15000 [ 0.000000] last_map_addr: bfed0000 end: bfed0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000 [ 0.000000] last_map_addr: 140000000 end: 140000000 [ 0.000000] ACPI: RSDP 000F8130, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BFEDB1BE, 0084 (r1 Sony VAIO 20080226 PTL 0) [ 0.000000] ACPI: FACP BFEE1C04, 00F4 (r3 Sony VAIO 20080226 PTL 1) [ 0.000000] ACPI: DSDT BFEDC5D9, 55B7 (r2 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: FACS BFEE2FC0, 0040 [ 0.000000] ACPI: APIC BFEE1CF8, 0068 (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: HPET BFEE1D60, 0038 (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: MCFG BFEE1D98, 003C (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: SLIC BFEE1DD4, 0176 (r1 Sony VAIO 20080226 PTL 1000000) [ 0.000000] ACPI: TMOR BFEE1F4A, 0026 (r1 Sony VAIO 20080226 PTL 3) [ 0.000000] ACPI: APIC BFEE1F70, 0068 (r1 Sony VAIO 20080226 PTL 0) [ 0.000000] ACPI: BOOT BFEE1FD8, 0028 (r1 Sony VAIO 20080226 PTL 1) [ 0.000000] ACPI: SSDT BFEDC33D, 029C (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB82A, 0287 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB776, 00B4 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB242, 0534 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Sony [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007ab938] TEXT DATA BSS ==> [0000200000 - 00007ab938] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #5 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000f81b0] 000f81b0 [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048159 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1556 pages reserved [ 0.000000] DMA zone: 2371 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767752 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028683 [ 0.000000] Kernel command line: root=/dev/sda8 video=vesafb:ywrap,mtrr vga=791 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2094.744 MHz processor. [ 0.000999] Console: colour dummy device 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000999] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.000999] Memory: 4041852k/5242880k available (3493k kernel code, 1050244k absent, 149876k reserved, 1419k data, 408k init) [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.48 BogoMIPS (lpj=2094744) [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] CPU0: Thermal monitoring enabled (TM2) [ 0.000999] using mwait in idle threads. [ 0.000999] Freeing SMP alternatives: 28k freed [ 0.000999] ACPI: Core revision 20080926 [ 0.008048] Setting APIC routing to flat [ 0.008432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018593] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.018999] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4189.27 BogoMIPS (lpj=2094638) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.090237] CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.090272] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.091012] Brought up 2 CPUs [ 0.091015] Total of 2 processors activated (8378.76 BogoMIPS). [ 0.091244] net_namespace: 888 bytes [ 0.091389] NET: Registered protocol family 16 [ 0.091550] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.091554] ACPI: bus type pci registered [ 0.091635] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.091639] PCI: MCFG area at e0000000 reserved in E820 [ 0.100764] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.100767] PCI: Using configuration type 1 for base access [ 0.103266] ACPI: EC: Look up EC in DSDT [ 0.109966] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.111200] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.116344] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.616001] ACPI: EC: missing confirmations, switch off interrupt mode. [ 0.616368] ACPI: Interpreter enabled [ 0.616371] ACPI: (supports S0 S5) [ 0.616377] ACPI: Using IOAPIC for interrupt routing [ 0.633210] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.633213] ACPI: EC: driver started in poll mode [ 0.633334] ACPI: No dock devices found. [ 0.633344] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.633435] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.633439] pci 0000:00:01.0: PME# disabled [ 0.633556] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.633670] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.633813] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc304800-0xfc304bff] [ 0.633902] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.633910] pci 0000:00:1a.7: PME# disabled [ 0.633988] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff] [ 0.634046] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.634053] pci 0000:00:1b.0: PME# disabled [ 0.634137] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.634144] pci 0000:00:1c.0: PME# disabled [ 0.634250] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.634257] pci 0000:00:1c.1: PME# disabled [ 0.634393] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.634400] pci 0000:00:1c.2: PME# disabled [ 0.634518] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] [ 0.634631] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] [ 0.634760] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] [ 0.634880] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc304c00-0xfc304fff] [ 0.634975] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.634983] pci 0000:00:1d.7: PME# disabled [ 0.635202] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.635210] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.635275] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.635288] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.635298] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.635308] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.635320] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] [ 0.635425] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] [ 0.635433] pci 0000:00:1f.2: reg 14 io port: [0x18e8-0x18eb] [ 0.635449] pci 0000:00:1f.2: reg 18 io port: [0x18e0-0x18e7] [ 0.635458] pci 0000:00:1f.2: reg 1c io port: [0x18b4-0x18b7] [ 0.635473] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] [ 0.635482] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc304000-0xfc3047ff] [ 0.635506] pci 0000:00:1f.2: PME# supported from D3hot [ 0.635513] pci 0000:00:1f.2: PME# disabled [ 0.635563] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.635590] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.635692] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff] [ 0.635712] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.635729] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff] [ 0.635738] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] [ 0.635748] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.635853] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.635855] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff] [ 0.635859] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.636281] pci 0000:02:00.0: reg 10 64bit mmio: [0xf6000000-0xf6003fff] [ 0.636335] pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff] [ 0.636540] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.636612] pci 0000:02:00.0: supports D1 D2 [ 0.636613] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.636642] pci 0000:02:00.0: PME# disabled [ 0.636762] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] [ 0.636768] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.636779] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.636838] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] [ 0.636845] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] [ 0.636853] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.636975] pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff] [ 0.637090] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.637103] pci 0000:06:00.0: PME# disabled [ 0.637196] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff] [ 0.637202] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] [ 0.637211] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] [ 0.637299] pci 0000:08:03.0: reg 10 32bit mmio: [0xfc004000-0xfc004fff] [ 0.637313] pci 0000:08:03.0: supports D1 D2 [ 0.637315] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.637323] pci 0000:08:03.0: PME# disabled [ 0.637387] pci 0000:08:03.1: reg 10 32bit mmio: [0xfc006000-0xfc0067ff] [ 0.637400] pci 0000:08:03.1: reg 14 32bit mmio: [0xfc000000-0xfc003fff] [ 0.637457] pci 0000:08:03.1: supports D1 D2 [ 0.637459] pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.637467] pci 0000:08:03.1: PME# disabled [ 0.637534] pci 0000:08:03.2: reg 10 32bit mmio: [0xfc005000-0xfc005fff] [ 0.637622] pci 0000:08:03.2: supports D1 D2 [ 0.637623] pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot [ 0.637631] pci 0000:08:03.2: PME# disabled [ 0.637729] pci 0000:00:1e.0: transparent bridge [ 0.637736] pci 0000:00:1e.0: bridge io port: [0xf000-0xffff] [ 0.637744] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] [ 0.637813] bus 00 -> node 0 [ 0.637818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.638115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.638229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.638341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.638452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.638577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.661544] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.661649] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.661753] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.661855] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.661956] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.662064] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.662167] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.662268] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.662560] ACPI: WMI: Mapper loaded [ 0.662721] SCSI subsystem initialized [ 0.662753] libata version 3.00 loaded. [ 0.662844] usbcore: registered new interface driver usbfs [ 0.662872] usbcore: registered new interface driver hub [ 0.662903] usbcore: registered new device driver usb [ 0.663008] PCI: Using ACPI for IRQ routing [ 0.670029] cfg80211: Using static regulatory domain info [ 0.670032] cfg80211: Regulatory domain: US [ 0.670035] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.670038] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.670041] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.670044] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.670047] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.670050] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.670053] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.670056] cfg80211: Calling CRDA for country: US [ 0.670088] PCI-GART: No AMD GART found. [ 0.670100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.670105] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.673006] Switched to high resolution mode on CPU 0 [ 0.673287] Switched to high resolution mode on CPU 1 [ 0.675006] pnp: PnP ACPI init [ 0.675014] ACPI: bus type pnp registered [ 0.683998] pnp 00:06: io resource (0xfe00-0xfe7f) overlaps 0000:00:1e.0 BAR 7 (0xf000-0xffff), disabling [ 0.684008] pnp 00:06: io resource (0xfe80-0xfeff) overlaps 0000:00:1e.0 BAR 7 (0xf000-0xffff), disabling [ 0.684224] pnp: PnP ACPI: found 10 devices [ 0.684227] ACPI: ACPI bus type pnp unregistered [ 0.684235] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.684239] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.684242] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.684245] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.684249] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.684252] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.684255] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.684258] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.684265] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.684268] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.684271] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.684274] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.684277] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.689203] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 0.689208] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.689211] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.689215] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff [ 0.689219] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.689225] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.689231] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.689239] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff [ 0.689247] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.689257] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.689263] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.689271] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff [ 0.689279] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.689290] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 0.689296] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.689304] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff [ 0.689311] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff [ 0.689324] pci 0000:08:03.0: CardBus bridge, secondary bus 0000:09 [ 0.689327] pci 0000:08:03.0: IO window: 0x00f000-0x00f0ff [ 0.689335] pci 0000:08:03.0: IO window: 0x00f400-0x00f4ff [ 0.689342] pci 0000:08:03.0: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.689350] pci 0000:08:03.0: MEM window: 0xc8000000-0xcbffffff [ 0.689358] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.689364] pci 0000:00:1e.0: IO window: 0xf000-0xffff [ 0.689372] pci 0000:00:1e.0: MEM window: 0xfc000000-0xfc0fffff [ 0.689379] pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000c7ffffff [ 0.689396] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.689400] pci 0000:00:01.0: setting latency timer to 64 [ 0.689414] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.689420] pci 0000:00:1c.0: setting latency timer to 64 [ 0.689436] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.689443] pci 0000:00:1c.1: setting latency timer to 64 [ 0.689458] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.689464] pci 0000:00:1c.2: setting latency timer to 64 [ 0.689477] pci 0000:00:1e.0: setting latency timer to 64 [ 0.689490] pci 0000:08:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.689499] bus: 00 index 0 io port: [0x00-0xffff] [ 0.689502] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.689505] bus: 01 index 0 io port: [0x2000-0x2fff] [ 0.689507] bus: 01 index 1 mmio: [0xcc000000-0xceffffff] [ 0.689510] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.689512] bus: 01 index 3 mmio: [0x0-0x0] [ 0.689514] bus: 02 index 0 io port: [0x3000-0x3fff] [ 0.689517] bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff] [ 0.689519] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff] [ 0.689522] bus: 02 index 3 mmio: [0x0-0x0] [ 0.689524] bus: 04 index 0 io port: [0x4000-0x4fff] [ 0.689527] bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff] [ 0.689529] bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff] [ 0.689531] bus: 04 index 3 mmio: [0x0-0x0] [ 0.689534] bus: 06 index 0 io port: [0x5000-0x5fff] [ 0.689536] bus: 06 index 1 mmio: [0xfa000000-0xfbffffff] [ 0.689539] bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff] [ 0.689541] bus: 06 index 3 mmio: [0x0-0x0] [ 0.689543] bus: 08 index 0 io port: [0xf000-0xffff] [ 0.689546] bus: 08 index 1 mmio: [0xfc000000-0xfc0fffff] [ 0.689548] bus: 08 index 2 mmio: [0xc4000000-0xc7ffffff] [ 0.689551] bus: 08 index 3 io port: [0x00-0xffff] [ 0.689553] bus: 08 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.689556] bus: 09 index 0 io port: [0xf000-0xf0ff] [ 0.689558] bus: 09 index 1 io port: [0xf400-0xf4ff] [ 0.689561] bus: 09 index 2 mmio: [0xc4000000-0xc7ffffff] [ 0.689563] bus: 09 index 3 mmio: [0xc8000000-0xcbffffff] [ 0.689585] NET: Registered protocol family 2 [ 0.699044] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.699503] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.701379] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.701933] TCP: Hash tables configured (established 262144 bind 65536) [ 0.701938] TCP reno registered [ 0.704104] NET: Registered protocol family 1 [ 0.704308] Simple Boot Flag at 0x36 set to 0x1 [ 0.704996] Microcode Update Driver: v2.00 , Peter Oruba [ 0.705485] NTFS driver 2.1.29 [Flags: R/O]. [ 0.705546] msgmni has been set to 7896 [ 0.705690] alg: No test for stdrng (krng) [ 0.705699] io scheduler noop registered [ 0.705702] io scheduler anticipatory registered [ 0.705705] io scheduler deadline registered [ 0.705715] io scheduler cfq registered (default) [ 0.705931] pci 0000:01:00.0: Boot video device [ 0.720461] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.720489] pcieport-driver 0000:00:01.0: found MSI capability [ 0.720512] pcieport-driver 0000:00:01.0: irq 47 for MSI/MSI-X [ 0.720520] pci_express 0000:00:01.0:pcie00: allocate port service [ 0.720546] pci_express 0000:00:01.0:pcie02: allocate port service [ 0.720569] pci_express 0000:00:01.0:pcie03: allocate port service [ 0.720635] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.720681] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.720722] pcieport-driver 0000:00:1c.0: irq 46 for MSI/MSI-X [ 0.720738] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.720761] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.720786] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.720915] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.720971] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.721005] pcieport-driver 0000:00:1c.1: irq 45 for MSI/MSI-X [ 0.721039] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.721064] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.721086] pci_express 0000:00:1c.1:pcie03: allocate port service [ 0.721193] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.721246] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.721287] pcieport-driver 0000:00:1c.2: irq 44 for MSI/MSI-X [ 0.721302] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.721327] pci_express 0000:00:1c.2:pcie02: allocate port service [ 0.721351] pci_express 0000:00:1c.2:pcie03: allocate port service [ 0.721649] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 3072k, total 14336k [ 0.721654] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.721656] vesafb: scrolling: redraw [ 0.721659] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.745850] Console: switching to colour frame buffer device 128x48 [ 0.768100] fb0: VESA VGA frame buffer device [ 0.770994] ACPI: AC Adapter [ADP1] (on-line) [ 0.809529] ACPI: Battery Slot [BAT0] (battery present) [ 0.809895] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.811609] ACPI: Lid Switch [LID0] [ 0.811823] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.812224] ACPI: Power Button (CM) [PWRB] [ 0.812958] ACPI: SSDT BFEDBFFA, 025F (r1 Sony VAIO 20080226 PTL 20050624) [ 0.813673] ACPI: SSDT BFEDBAB1, 04B7 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.817773] Monitor-Mwait will be used to enter C-1 state [ 0.817776] Monitor-Mwait will be used to enter C-2 state [ 0.817777] Monitor-Mwait will be used to enter C-3 state [ 0.817805] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.818142] processor ACPI_CPU:00: registered as cooling_device0 [ 0.818419] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.819679] ACPI: SSDT BFEDC259, 00E4 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.820290] ACPI: SSDT BFEDBF68, 0092 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.830238] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.830569] processor ACPI_CPU:01: registered as cooling_device1 [ 0.830846] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.832871] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.840520] ACPI: Thermal Zone [TZ00] (53 C) [ 0.848097] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.856053] ACPI: Thermal Zone [TZ01] (53 C) [ 0.865497] Linux agpgart interface v0.103 [ 0.870813] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 0.876652] Hangcheck: Using get_cycles(). [ 0.882552] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 0.890047] brd: module loaded [ 0.896774] loop: module loaded [ 0.903199] console [netcon0] enabled [ 0.909711] netconsole: network logging started [ 0.916406] Uniform Multi-Platform E-IDE driver [ 0.923314] piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) [ 0.930503] pci 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.937960] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 0.945610] ide0: BM-DMA at 0x18a0-0x18a7 [ 0.953386] ide1: BM-DMA at 0x18a8-0x18af [ 0.961184] Probing IDE interface ide0... [ 1.633457] hda: Optiarc BD ROM BC-5500A, ATAPI CD/DVD-ROM drive [ 2.253291] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.253419] hda: UDMA/33 mode selected [ 2.261735] Probing IDE interface ide1... [ 2.780303] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.790838] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.799412] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.808384] ide-gd driver 1.18 [ 2.817393] ide-cd driver 5.00 [ 2.826684] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 2.835747] Uniform CD-ROM driver Revision: 3.20 [ 2.846752] Driver 'sd' needs updating - please use bus_type methods [ 2.855894] Driver 'sr' needs updating - please use bus_type methods [ 2.864794] ahci 0000:00:1f.2: version 3.0 [ 2.864807] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.873639] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 2.873722] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 2.882482] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 2.891101] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.891334] scsi0 : ahci [ 2.899834] scsi1 : ahci [ 2.908291] scsi2 : ahci [ 2.916573] ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 43 [ 2.925007] ata2: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 43 [ 2.933268] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304200 irq 43 [ 3.246270] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.254956] ACPI Error (psargs-0358): [SMS_] Namespace lookup failure, AE_NOT_FOUND [ 3.263270] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0.SATA.PRT0._SDD] (Node ffff88013f858330), AE_NOT_FOUND [ 3.280314] ata1.00: ACPI _SDD failed (AE 0x5) [ 8.916016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.925105] ACPI Error (psargs-0358): [SMS_] Namespace lookup failure, AE_NOT_FOUND [ 8.933857] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0.SATA.PRT0._SDD] (Node ffff88013f858330), AE_NOT_FOUND [ 8.951872] ata1.00: ACPI _SDD failed (AE 0x5) [ 8.960797] ata1.00: ACPI: failed the second time, disabled [ 8.970401] ata1.00: configured for UDMA/100 [ 9.295267] ata2: SATA link down (SStatus 0 SControl 300) [ 9.620266] ata3: SATA link down (SStatus 0 SControl 300) [ 9.639325] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2300B 0041 PQ: 0 ANSI: 5 [ 9.648412] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors: (300 GB/279 GiB) [ 9.657507] sd 0:0:0:0: [sda] Write Protect is off [ 9.666519] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.666537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.675765] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors: (300 GB/279 GiB) [ 9.684949] sd 0:0:0:0: [sda] Write Protect is off [ 9.693986] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.694005] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.703229] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 10.145584] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.154974] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.164417] yenta_cardbus 0000:08:03.0: CardBus bridge found [104d:9016] [ 10.173896] yenta_cardbus 0000:08:03.0: Enabling burst memory read transactions [ 10.183490] yenta_cardbus 0000:08:03.0: Using CSCINT to route CSC interrupts to PCI [ 10.192922] yenta_cardbus 0000:08:03.0: Routing CardBus interrupts to PCI [ 10.202168] yenta_cardbus 0000:08:03.0: TI: mfunc 0x011b1b22, devctl 0x64 [ 10.434804] yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 10.444069] yenta_cardbus 0000:08:03.0: Socket status: 30000006 [ 10.453151] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c [ 10.462417] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge I/O window: 0xf000 - 0xffff [ 10.472012] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfc0fffff [ 10.481557] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc7ffffff [ 10.491159] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 10.505111] i8042.c: Detected active multiplexing controller, rev 1.1. [ 10.518766] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 10.528319] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 10.537974] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 10.547400] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 10.556819] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 10.566315] mice: PS/2 mouse device common for all mice [ 10.583384] rtc_cmos 00:07: RTC can wake from S4 [ 10.592673] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 10.601793] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 10.610858] cpuidle: using governor ladder [ 10.615004] Marking TSC unstable due to TSC halts in idle [ 10.628869] TCP cubic registered [ 10.637621] NET: Registered protocol family 10 [ 10.646637] IPv6 over IPv4 tunneling driver [ 10.655220] NET: Registered protocol family 17 [ 10.785917] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 11.000314] Clocksource tsc unstable (delta = -249050784 ns) [ 11.343684] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa04000 [ 11.384855] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3 [ 11.972743] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa04000 [ 12.014485] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 [ 12.096487] kjournald starting. Commit interval 5 seconds [ 12.096515] EXT3-fs: mounted filesystem with ordered data mode. [ 12.096525] VFS: Mounted root (ext3 filesystem) readonly. [ 12.096552] Freeing unused kernel memory: 408k freed [ 15.972922] uhci_hcd: USB Universal Host Controller Interface driver [ 15.972980] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.972996] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 15.973007] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 15.973073] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 15.973117] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 15.973269] usb usb1: configuration #1 chosen from 1 choice [ 15.973306] hub 1-0:1.0: USB hub found [ 15.973316] hub 1-0:1.0: 2 ports detected [ 15.973453] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 15.973467] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 15.973473] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 15.973503] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 15.973558] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 15.973654] usb usb2: configuration #1 chosen from 1 choice [ 15.973688] hub 2-0:1.0: USB hub found [ 15.973696] hub 2-0:1.0: 2 ports detected [ 15.973812] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 15.973824] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 15.973830] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.973857] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 15.973906] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 15.974001] usb usb3: configuration #1 chosen from 1 choice [ 15.974035] hub 3-0:1.0: USB hub found [ 15.974042] hub 3-0:1.0: 2 ports detected [ 15.974152] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 15.974163] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 15.974169] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 15.974196] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 15.974246] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 15.974365] usb usb4: configuration #1 chosen from 1 choice [ 15.974397] hub 4-0:1.0: USB hub found [ 15.974404] hub 4-0:1.0: 2 ports detected [ 15.974517] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 15.974529] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 15.974535] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 15.974564] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 15.974613] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 15.974713] usb usb5: configuration #1 chosen from 1 choice [ 15.974745] hub 5-0:1.0: USB hub found [ 15.974752] hub 5-0:1.0: 2 ports detected [ 15.979691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.979695] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 15.979730] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 15.979767] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 15.979774] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 15.979814] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 15.983773] ehci_hcd 0000:00:1a.7: debug port 1 [ 15.983787] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 15.983796] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304800 [ 16.000049] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 16.000181] usb usb6: configuration #1 chosen from 1 choice [ 16.000234] hub 6-0:1.0: USB hub found [ 16.000247] hub 6-0:1.0: 4 ports detected [ 16.000416] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 16.000458] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 16.000464] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 16.000506] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 16.004464] ehci_hcd 0000:00:1d.7: debug port 1 [ 16.004479] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 16.004488] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304c00 [ 16.009703] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 16.014314] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 16.014403] usb usb7: configuration #1 chosen from 1 choice [ 16.014439] hub 7-0:1.0: USB hub found [ 16.014449] hub 7-0:1.0: 6 ports detected [ 16.079476] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 16.084584] sky2 driver version 1.22 [ 16.084664] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.084699] sky2 0000:02:00.0: setting latency timer to 64 [ 16.084806] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3 [ 16.118661] sky2 0000:02:00.0: Marvell Yukon 88E8055 Gigabit Ethernet Controller [ 16.118665] Part Number: Yukon 88E8055 [ 16.118667] Engineering Level: Rev. 1.3 [ 16.118669] Manufacturer: Marvell [ 16.119085] sky2 0000:02:00.0: irq 42 for MSI/MSI-X [ 16.120203] sky2 eth0: addr 00:1a:80:fc:05:0d [ 16.122216] udev: renamed network interface eth0 to eth1 [ 16.149700] ohci1394 0000:08:03.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.201347] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fc006000-fc0067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 16.302314] usb 6-2: new high speed USB device using ehci_hcd and address 2 [ 16.412728] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.412798] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.423389] usb 6-2: configuration #1 chosen from 1 choice [ 16.442400] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 16.442403] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 16.442543] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.442573] iwlagn 0000:06:00.0: setting latency timer to 64 [ 16.442645] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 16.488448] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 16.488706] iwlagn 0000:06:00.0: PCI INT A disabled [ 16.489666] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 16.680304] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 16.823105] usb 3-2: configuration #1 chosen from 1 choice [ 17.093385] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input6 [ 17.099078] generic-usb 0003:04B3:310B.0001: input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.0-2/input0 [ 17.099096] usbcore: registered new interface driver usbhid [ 17.099101] usbhid: v2.6:USB HID core driver [ 17.458300] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302bc5efe] [ 18.588787] EXT3 FS on sda8, internal journal [ 18.778624] kjournald starting. Commit interval 5 seconds [ 18.778954] EXT3 FS on sda7, internal journal [ 18.778960] EXT3-fs: mounted filesystem with ordered data mode. [ 21.367819] sky2 eth1: enabling interface [ 21.372290] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 21.553431] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 21.553555] iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 21.553678] iwlagn 0000:06:00.0: irq 41 for MSI/MSI-X [ 21.553770] iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 21.850872] Registered led device: iwl-phy0:radio [ 21.851697] Registered led device: iwl-phy0:assoc [ 21.851722] Registered led device: iwl-phy0:RX [ 21.851743] Registered led device: iwl-phy0:TX [ 21.881571] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.713544] wlan0: authenticate with AP 00:80:5a:4b:7f:e4 [ 22.718653] wlan0: authenticate with AP 00:80:5a:4b:7f:e4 [ 22.718669] wlan0: authenticated [ 22.718673] wlan0: associate with AP 00:80:5a:4b:7f:e4 [ 22.731143] wlan0: RX AssocResp from 00:80:5a:4b:7f:e4 (capab=0x411 status=0 aid=1) [ 22.731147] wlan0: associated [ 22.758198] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 33.320063] wlan0: no IPv6 routers present [ 40.073036] mtrr: base(0xcd000000) is not aligned on a size(0xe00000) boundary [ 118.776184] mtrr: no MTRR for cd000000,e00000 found [ 139.459457] mtrr: base(0xcd000000) is not aligned on a size(0xe00000) boundary [ 168.812338] mtrr: no MTRR for cd000000,e00000 found [ 219.367076] CE: hpet increasing min_delta_ns to 15000 nsec [ 222.422585] mtrr: no MTRR for d0000000,ff00000 found