[ 0.000000] Linux version 2.6.27-gentoo-r4 (root@HeraGentoo) (gcc version 4.3.2 (Gentoo 4.3.2 p1.0) ) #3 SMP Sat Nov 29 07:22:16 CET 2008 [ 0.000000] Command line: root=/dev/sda8 video=vesafb:ywrap,mtrr vga=791 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfed0000 page 4k [ 0.000000] kernel direct mapping tables up to bfed0000 @ 8000-d000 [ 0.000000] last_map_addr: bfed0000 end: bfed0000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] last_map_addr: 140000000 end: 140000000 [ 0.000000] ACPI: RSDP 000F8130, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT BFEDB1BE, 0084 (r1 Sony VAIO 20080226 PTL 0) [ 0.000000] ACPI: FACP BFEE1C04, 00F4 (r3 Sony VAIO 20080226 PTL 1) [ 0.000000] ACPI: DSDT BFEDC5D9, 55B7 (r2 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: FACS BFEE2FC0, 0040 [ 0.000000] ACPI: APIC BFEE1CF8, 0068 (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: HPET BFEE1D60, 0038 (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: MCFG BFEE1D98, 003C (r1 Sony VAIO 20080226 PTL 5A) [ 0.000000] ACPI: SLIC BFEE1DD4, 0176 (r1 Sony VAIO 20080226 PTL 1000000) [ 0.000000] ACPI: TMOR BFEE1F4A, 0026 (r1 Sony VAIO 20080226 PTL 3) [ 0.000000] ACPI: APIC BFEE1F70, 0068 (r1 Sony VAIO 20080226 PTL 0) [ 0.000000] ACPI: BOOT BFEE1FD8, 0028 (r1 Sony VAIO 20080226 PTL 1) [ 0.000000] ACPI: SSDT BFEDC33D, 029C (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB82A, 0287 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB776, 00B4 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: SSDT BFEDB242, 0534 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Sony [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000752ac8] TEXT DATA BSS ==> [0000200000 - 0000752ac8] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #5 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f81b0] 000f81b0 [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 2476 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 767752 pages, LIFO batch:31 [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 41696 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028788 [ 0.000000] Kernel command line: root=/dev/sda8 video=vesafb:ywrap,mtrr vga=791 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2094.719 MHz processor. [ 0.000999] Console: colour dummy device 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000999] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.000999] Memory: 4042260k/5242880k available (3374k kernel code, 149528k reserved, 1260k data, 348k init) [ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated [ 0.000999] hpet clockevent registered [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.43 BogoMIPS (lpj=2094719) [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] CPU0: Thermal monitoring enabled (TM2) [ 0.000999] using mwait in idle threads. [ 0.000999] Freeing SMP alternatives: 28k freed [ 0.000999] ACPI: Core revision 20080609 [ 0.008430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018559] CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.018564] Using local APIC timer interrupts. [ 0.019001] APIC timer calibration result 12468557 [ 0.019002] Detected 12.468 MHz APIC timer. [ 0.019096] Booting processor 1/1 ip 6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4189.28 BogoMIPS (lpj=2094641) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.091241] CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 [ 0.091275] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.092014] Brought up 2 CPUs [ 0.092017] Total of 2 processors activated (8378.72 BogoMIPS). [ 0.092252] net_namespace: 800 bytes [ 0.092369] NET: Registered protocol family 16 [ 0.092589] No dock devices found. [ 0.092594] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.092598] ACPI: bus type pci registered [ 0.092681] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.092685] PCI: MCFG area at e0000000 reserved in E820 [ 0.098254] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.098257] PCI: Using configuration type 1 for base access [ 0.099809] ACPI: EC: Look up EC in DSDT [ 0.105923] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.107233] ACPI: Interpreter enabled [ 0.107236] ACPI: (supports S0 S5) [ 0.107243] ACPI: Using IOAPIC for interrupt routing [ 0.107529] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.110890] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.128364] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.128364] ACPI: EC: driver started in poll mode [ 0.128477] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.128519] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.128519] pci 0000:00:01.0: PME# disabled [ 0.128519] PCI: 0000:00:1a.0 reg 20 io port: [1800, 181f] [ 0.128564] PCI: 0000:00:1a.1 reg 20 io port: [1820, 183f] [ 0.128681] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc304800, fc304bff] [ 0.128794] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.128802] pci 0000:00:1a.7: PME# disabled [ 0.128882] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc300000, fc303fff] [ 0.128932] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.128940] pci 0000:00:1b.0: PME# disabled [ 0.129032] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.129040] pci 0000:00:1c.0: PME# disabled [ 0.129146] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.129154] pci 0000:00:1c.1: PME# disabled [ 0.129259] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.129269] pci 0000:00:1c.2: PME# disabled [ 0.129381] PCI: 0000:00:1d.0 reg 20 io port: [1840, 185f] [ 0.129502] PCI: 0000:00:1d.1 reg 20 io port: [1860, 187f] [ 0.129612] PCI: 0000:00:1d.2 reg 20 io port: [1880, 189f] [ 0.129730] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc304c00, fc304fff] [ 0.129842] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.129852] pci 0000:00:1d.7: PME# disabled [ 0.130064] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.130072] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.130124] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] [ 0.130139] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] [ 0.130149] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] [ 0.130162] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] [ 0.130172] PCI: 0000:00:1f.1 reg 20 io port: [18a0, 18af] [ 0.130318] PCI: 0000:00:1f.2 reg 10 io port: [18f0, 18f7] [ 0.130326] PCI: 0000:00:1f.2 reg 14 io port: [18e8, 18eb] [ 0.130342] PCI: 0000:00:1f.2 reg 18 io port: [18e0, 18e7] [ 0.130351] PCI: 0000:00:1f.2 reg 1c io port: [18b4, 18b7] [ 0.130366] PCI: 0000:00:1f.2 reg 20 io port: [18c0, 18df] [ 0.130375] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc304000, fc3047ff] [ 0.130407] pci 0000:00:1f.2: PME# supported from D3hot [ 0.130414] pci 0000:00:1f.2: PME# disabled [ 0.130444] PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff] [ 0.130468] PCI: 0000:00:1f.3 reg 20 io port: [1c00, 1c1f] [ 0.130565] PCI: 0000:01:00.0 reg 10 32bit mmio: [ce000000, ceffffff] [ 0.130582] PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff] [ 0.130599] PCI: 0000:01:00.0 reg 1c 64bit mmio: [cc000000, cdffffff] [ 0.130608] PCI: 0000:01:00.0 reg 24 io port: [2000, 207f] [ 0.130617] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.130710] PCI: bridge 0000:00:01.0 io port: [2000, 2fff] [ 0.130713] PCI: bridge 0000:00:01.0 32bit mmio: [cc000000, ceffffff] [ 0.130717] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] [ 0.131147] PCI: 0000:02:00.0 reg 10 64bit mmio: [f6000000, f6003fff] [ 0.131201] PCI: 0000:02:00.0 reg 18 io port: [3000, 30ff] [ 0.131406] PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.131557] pci 0000:02:00.0: supports D1 [ 0.131559] pci 0000:02:00.0: supports D2 [ 0.131560] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131585] pci 0000:02:00.0: PME# disabled [ 0.131632] PCI: bridge 0000:00:1c.0 io port: [3000, 3fff] [ 0.131638] PCI: bridge 0000:00:1c.0 32bit mmio: [f6000000, f7ffffff] [ 0.131654] PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff] [ 0.131724] PCI: bridge 0000:00:1c.1 io port: [4000, 4fff] [ 0.131732] PCI: bridge 0000:00:1c.1 32bit mmio: [f8000000, f9ffffff] [ 0.131741] PCI: bridge 0000:00:1c.1 64bit mmio pref: [f2000000, f3ffffff] [ 0.131871] PCI: 0000:06:00.0 reg 10 64bit mmio: [fa000000, fa001fff] [ 0.131982] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.131995] pci 0000:06:00.0: PME# disabled [ 0.132055] PCI: bridge 0000:00:1c.2 io port: [5000, 5fff] [ 0.132063] PCI: bridge 0000:00:1c.2 32bit mmio: [fa000000, fbffffff] [ 0.132072] PCI: bridge 0000:00:1c.2 64bit mmio pref: [f4000000, f5ffffff] [ 0.132155] PCI: 0000:08:03.0 reg 10 32bit mmio: [fc004000, fc004fff] [ 0.132183] pci 0000:08:03.0: supports D1 [ 0.132184] pci 0000:08:03.0: supports D2 [ 0.132185] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132194] pci 0000:08:03.0: PME# disabled [ 0.132254] PCI: 0000:08:03.1 reg 10 32bit mmio: [fc006000, fc0067ff] [ 0.132266] PCI: 0000:08:03.1 reg 14 32bit mmio: [fc000000, fc003fff] [ 0.132331] pci 0000:08:03.1: supports D1 [ 0.132332] pci 0000:08:03.1: supports D2 [ 0.132334] pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132342] pci 0000:08:03.1: PME# disabled [ 0.132389] PCI: 0000:08:03.2 reg 10 32bit mmio: [fc005000, fc005fff] [ 0.132500] pci 0000:08:03.2: supports D1 [ 0.132501] pci 0000:08:03.2: supports D2 [ 0.132503] pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot [ 0.132510] pci 0000:08:03.2: PME# disabled [ 0.132590] pci 0000:00:1e.0: transparent bridge [ 0.132597] PCI: bridge 0000:00:1e.0 io port: [f000, ffff] [ 0.132603] PCI: bridge 0000:00:1e.0 32bit mmio: [fc000000, fc0fffff] [ 0.132708] bus 00 -> node 0 [ 0.132713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.133008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.133123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.133234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.133344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.133467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.156755] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.156755] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.156755] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.156848] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.156947] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.157051] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.157149] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.157247] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.157638] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.157833] pnp: PnP ACPI init [ 0.157833] ACPI: bus type pnp registered [ 0.165002] pnp 00:06: io resource (0xfe00-0xfe7f) overlaps 0000:00:1e.0 BAR 7 (0xf000-0xffff), disabling [ 0.165002] pnp 00:06: io resource (0xfe80-0xfeff) overlaps 0000:00:1e.0 BAR 7 (0xf000-0xffff), disabling [ 0.165002] pnp: PnP ACPI: found 10 devices [ 0.165002] ACPI: ACPI bus type pnp unregistered [ 0.165107] SCSI subsystem initialized [ 0.165429] libata version 3.00 loaded. [ 0.165439] usbcore: registered new interface driver usbfs [ 0.165439] usbcore: registered new interface driver hub [ 0.165546] usbcore: registered new device driver usb [ 0.165598] PCI: Using ACPI for IRQ routing [ 0.178016] PCI-GART: No AMD northbridge found. [ 0.178025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.178029] hpet0: 3 64-bit timers, 14318180 Hz [ 0.179557] ACPI: RTC can wake from S4 [ 0.184300] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.184305] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.184309] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.184313] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.184317] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.184321] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.184325] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 0.184328] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.184337] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.184340] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.184343] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.184346] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.184350] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.189066] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 0.189071] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.189075] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.189079] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff [ 0.189084] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.189090] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.189097] pci 0000:00:1c.0: IO window: 0x3000-0x3fff [ 0.189106] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff [ 0.189114] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.189125] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.189131] pci 0000:00:1c.1: IO window: 0x4000-0x4fff [ 0.189140] pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff [ 0.189148] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.189159] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 0.189166] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.189175] pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff [ 0.189182] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff [ 0.189195] pci 0000:08:03.0: CardBus bridge, secondary bus 0000:09 [ 0.189198] pci 0000:08:03.0: IO window: 0x00f000-0x00f0ff [ 0.189206] pci 0000:08:03.0: IO window: 0x00f400-0x00f4ff [ 0.189214] pci 0000:08:03.0: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.189222] pci 0000:08:03.0: MEM window: 0xc8000000-0xcbffffff [ 0.189230] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.189236] pci 0000:00:1e.0: IO window: 0xf000-0xffff [ 0.189245] pci 0000:00:1e.0: MEM window: 0xfc000000-0xfc0fffff [ 0.189253] pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000c7ffffff [ 0.189270] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.189275] pci 0000:00:01.0: setting latency timer to 64 [ 0.189284] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.189295] pci 0000:00:1c.0: setting latency timer to 64 [ 0.189307] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.189314] pci 0000:00:1c.1: setting latency timer to 64 [ 0.189327] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.189334] pci 0000:00:1c.2: setting latency timer to 64 [ 0.189350] pci 0000:00:1e.0: setting latency timer to 64 [ 0.189363] pci 0000:08:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.189374] bus: 00 index 0 io port: [0, ffff] [ 0.189377] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.189379] bus: 01 index 0 io port: [2000, 2fff] [ 0.189382] bus: 01 index 1 mmio: [cc000000, ceffffff] [ 0.189384] bus: 01 index 2 mmio: [d0000000, dfffffff] [ 0.189387] bus: 01 index 3 mmio: [0, 0] [ 0.189389] bus: 02 index 0 io port: [3000, 3fff] [ 0.189391] bus: 02 index 1 mmio: [f6000000, f7ffffff] [ 0.189394] bus: 02 index 2 mmio: [f0000000, f1ffffff] [ 0.189396] bus: 02 index 3 mmio: [0, 0] [ 0.189399] bus: 04 index 0 io port: [4000, 4fff] [ 0.189401] bus: 04 index 1 mmio: [f8000000, f9ffffff] [ 0.189404] bus: 04 index 2 mmio: [f2000000, f3ffffff] [ 0.189406] bus: 04 index 3 mmio: [0, 0] [ 0.189408] bus: 06 index 0 io port: [5000, 5fff] [ 0.189411] bus: 06 index 1 mmio: [fa000000, fbffffff] [ 0.189413] bus: 06 index 2 mmio: [f4000000, f5ffffff] [ 0.189416] bus: 06 index 3 mmio: [0, 0] [ 0.189418] bus: 08 index 0 io port: [f000, ffff] [ 0.189420] bus: 08 index 1 mmio: [fc000000, fc0fffff] [ 0.189423] bus: 08 index 2 mmio: [c4000000, c7ffffff] [ 0.189425] bus: 08 index 3 io port: [0, ffff] [ 0.189428] bus: 08 index 4 mmio: [0, ffffffffffffffff] [ 0.189430] bus: 09 index 0 io port: [f000, f0ff] [ 0.189433] bus: 09 index 1 io port: [f400, f4ff] [ 0.189436] bus: 09 index 2 mmio: [c4000000, c7ffffff] [ 0.189439] bus: 09 index 3 mmio: [c8000000, cbffffff] [ 0.189460] NET: Registered protocol family 2 [ 0.199332] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.199778] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.201660] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.202217] TCP: Hash tables configured (established 262144 bind 65536) [ 0.202221] TCP reno registered [ 0.204377] NET: Registered protocol family 1 [ 0.204576] Simple Boot Flag at 0x36 set to 0x1 [ 0.205101] IA-32 Microcode Update Driver: v1.14a [ 0.205729] NTFS driver 2.1.29 [Flags: R/O]. [ 0.205759] msgmni has been set to 7896 [ 0.205823] io scheduler noop registered [ 0.205826] io scheduler anticipatory registered [ 0.205828] io scheduler deadline registered [ 0.205839] io scheduler cfq registered (default) [ 0.206044] pci 0000:01:00.0: Boot video device [ 0.206138] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.206166] pcieport-driver 0000:00:01.0: found MSI capability [ 0.206194] pci_express 0000:00:01.0:pcie00: allocate port service [ 0.206222] pci_express 0000:00:01.0:pcie02: allocate port service [ 0.206249] pci_express 0000:00:01.0:pcie03: allocate port service [ 0.206324] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.206378] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.206437] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.206463] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.206489] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.206629] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.206684] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.206746] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.206772] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.206797] pci_express 0000:00:1c.1:pcie03: allocate port service [ 0.206941] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.206996] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.207078] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.207104] pci_express 0000:00:1c.2:pcie02: allocate port service [ 0.207129] pci_express 0000:00:1c.2:pcie03: allocate port service [ 0.209329] hpet_resources: 0xfed00000 is busy [ 0.209367] Linux agpgart interface v0.103 [ 0.209371] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 0.209375] Hangcheck: Using get_cycles(). [ 0.209520] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 3072k, total 14336k [ 0.209525] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.209528] vesafb: scrolling: redraw [ 0.209531] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.233680] Console: switching to colour frame buffer device 128x48 [ 0.255920] fb0: VESA VGA frame buffer device [ 0.256186] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.258007] ACPI: Lid Switch [LID0] [ 0.258221] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.263298] ACPI: Power Button (CM) [PWRB] [ 0.264052] ACPI: SSDT BFEDBFFA, 025F (r1 Sony VAIO 20080226 PTL 20050624) [ 0.264773] ACPI: SSDT BFEDBAB1, 04B7 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.267337] Monitor-Mwait will be used to enter C-1 state [ 0.267339] Monitor-Mwait will be used to enter C-2 state [ 0.267341] Monitor-Mwait will be used to enter C-3 state [ 0.267384] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.267716] processor ACPI0007:00: registered as cooling_device0 [ 0.267995] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.268702] ACPI: SSDT BFEDC259, 00E4 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.269314] ACPI: SSDT BFEDBF68, 0092 (r1 Sony VAIO 20080226 PTL 20050624) [ 0.270711] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.271036] processor ACPI0007:01: registered as cooling_device1 [ 0.271313] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.273369] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.276532] ACPI: Thermal Zone [TZ00] (47 C) [ 0.279414] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.287064] ACPI: Thermal Zone [TZ01] (47 C) [ 0.291965] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 0.298388] brd: module loaded [ 0.304080] loop: module loaded [ 0.309490] console [netcon0] enabled [ 0.314970] netconsole: network logging started [ 0.320629] Uniform Multi-Platform E-IDE driver [ 0.326498] piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) [ 0.332648] pci 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.339043] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 0.345645] ide0: BM-DMA at 0x18a0-0x18a7 [ 0.352367] ide1: BM-DMA at 0x18a8-0x18af [ 0.359108] Probing IDE interface ide0... [ 0.524361] Switched to high resolution mode on CPU 1 [ 0.524363] Switched to high resolution mode on CPU 0 [ 1.008456] hda: Optiarc BD ROM BC-5500A, ATAPI CD/DVD-ROM drive [ 1.627291] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.627418] hda: UDMA/33 mode selected [ 1.634677] Probing IDE interface ide1... [ 2.153303] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.162805] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.170346] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.178260] ide_generic: I/O resource 0x1F0-0x1F7 not free. [ 2.186281] ide_generic: I/O resource 0x170-0x177 not free. [ 2.194875] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 2.203291] Uniform CD-ROM driver Revision: 3.20 [ 2.213796] Driver 'sd' needs updating - please use bus_type methods [ 2.222602] Driver 'sr' needs updating - please use bus_type methods [ 2.231455] ahci 0000:00:1f.2: version 3.0 [ 2.231470] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.240425] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 2.249340] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 2.258141] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.258337] scsi0 : ahci [ 2.266917] scsi1 : ahci [ 2.275179] scsi2 : ahci [ 2.283161] ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 315 [ 2.291300] ata2: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304180 irq 315 [ 2.299427] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304200 irq 315 [ 2.612269] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.620649] ACPI Error (psargs-0358): [SMS_] Namespace lookup failure, AE_NOT_FOUND [ 2.628699] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SATA.PRT0._SDD] (Node ffff88013f85a330), AE_NOT_FOUND [ 2.645278] ata1.00: ACPI _SDD failed (AE 0x5) [ 7.926018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.934900] ACPI Error (psargs-0358): [SMS_] Namespace lookup failure, AE_NOT_FOUND [ 7.943469] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SATA.PRT0._SDD] (Node ffff88013f85a330), AE_NOT_FOUND [ 7.961018] ata1.00: ACPI _SDD failed (AE 0x5) [ 7.969780] ata1.00: ACPI: failed the second time, disabled [ 7.979265] ata1.00: configured for UDMA/100 [ 8.303266] ata2: SATA link down (SStatus 0 SControl 300) [ 8.627265] ata3: SATA link down (SStatus 0 SControl 300) [ 8.646322] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2300B 0041 PQ: 0 ANSI: 5 [ 8.655329] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 8.664299] sd 0:0:0:0: [sda] Write Protect is off [ 8.673186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.673204] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.682315] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) [ 8.691350] sd 0:0:0:0: [sda] Write Protect is off [ 8.700258] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.700275] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.709375] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 8.858528] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.867773] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.877130] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 8.889870] i8042.c: Detected active multiplexing controller, rev 1.1. [ 8.902981] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.912361] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 8.921581] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 8.930791] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 8.939789] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 8.948654] mice: PS/2 mouse device common for all mice [ 9.172635] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 9.192420] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 9.201653] rtc0: alarms up to one month, y3k, hpet irqs [ 9.210978] cpuidle: using governor ladder [ 9.214002] Marking TSC unstable due to TSC halts in idle [ 9.229266] TCP cubic registered [ 9.238426] NET: Registered protocol family 10 [ 9.248199] IPv6 over IPv4 tunneling driver [ 9.257698] NET: Registered protocol family 17 [ 9.501064] Clocksource tsc unstable (delta = -194302545 ns) [ 9.782520] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa04000 [ 9.824840] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3 [ 9.880859] kjournald starting. Commit interval 5 seconds [ 9.880875] EXT3-fs: mounted filesystem with ordered data mode. [ 9.880886] VFS: Mounted root (ext3 filesystem) readonly. [ 9.880912] Freeing unused kernel memory: 348k freed [ 13.781188] USB Universal Host Controller Interface driver v3.0 [ 13.781246] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.781260] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 13.781266] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 13.781315] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 13.781373] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 13.781508] usb usb1: configuration #1 chosen from 1 choice [ 13.781542] hub 1-0:1.0: USB hub found [ 13.781551] hub 1-0:1.0: 2 ports detected [ 13.843233] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 13.847065] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 13.883282] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 13.883299] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 13.883306] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 13.883338] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 13.883394] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 13.883505] usb usb2: configuration #1 chosen from 1 choice [ 13.883539] hub 2-0:1.0: USB hub found [ 13.883548] hub 2-0:1.0: 2 ports detected [ 13.985386] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 13.985407] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 13.985414] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 13.985447] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 13.989385] ehci_hcd 0000:00:1a.7: debug port 1 [ 13.989399] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 13.989421] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304800 [ 13.999311] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.999405] usb usb3: configuration #1 chosen from 1 choice [ 13.999441] hub 3-0:1.0: USB hub found [ 13.999450] hub 3-0:1.0: 4 ports detected [ 14.063902] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 14.063906] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 14.201539] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 14.201556] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 14.201563] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.201599] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 14.201653] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 14.201766] usb usb4: configuration #1 chosen from 1 choice [ 14.201801] hub 4-0:1.0: USB hub found [ 14.201811] hub 4-0:1.0: 2 ports detected [ 14.305066] usb 3-2: new high speed USB device using ehci_hcd and address 2 [ 14.404513] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 14.404530] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 14.404537] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.404575] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 14.404639] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 14.404756] usb usb5: configuration #1 chosen from 1 choice [ 14.404790] hub 5-0:1.0: USB hub found [ 14.404799] hub 5-0:1.0: 2 ports detected [ 14.425340] usb 3-2: configuration #1 chosen from 1 choice [ 14.506363] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 14.506379] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 14.506386] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.506429] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 14.506471] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 14.506586] usb usb6: configuration #1 chosen from 1 choice [ 14.506620] hub 6-0:1.0: USB hub found [ 14.506628] hub 6-0:1.0: 2 ports detected [ 14.608502] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 14.608527] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 14.608534] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 14.608571] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 14.612501] ehci_hcd 0000:00:1d.7: debug port 1 [ 14.612512] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 14.612552] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304c00 [ 14.622312] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.622398] usb usb7: configuration #1 chosen from 1 choice [ 14.622433] hub 7-0:1.0: USB hub found [ 14.622442] hub 7-0:1.0: 6 ports detected [ 14.824501] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 14.824544] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.918334] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 14.918468] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.918499] sky2 0000:02:00.0: setting latency timer to 64 [ 14.918587] sky2 0000:02:00.0: v1.22 addr 0xf6000000 irq 16 Yukon-2 EC Ultra rev 3 [ 14.920316] sky2 eth0: addr 00:1a:80:fc:05:0d [ 14.920710] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.920746] iwlagn 0000:06:00.0: setting latency timer to 64 [ 14.920817] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 14.925911] udev: renamed network interface eth0 to eth1 [ 14.933610] ohci1394 0000:08:03.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.969161] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 14.969359] iwlagn 0000:06:00.0: PCI INT A disabled [ 14.969831] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 14.983817] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fc006000-fc0067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 15.175057] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 15.318855] usb 4-2: configuration #1 chosen from 1 choice [ 15.460159] nvidia: module license 'NVIDIA' taints kernel. [ 15.715683] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.715700] nvidia 0000:01:00.0: setting latency timer to 64 [ 15.715836] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008 [ 15.729177] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input5 [ 15.735097] input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.0-2 [ 15.735122] usbcore: registered new interface driver usbhid [ 15.735126] usbhid: v2.6:USB HID core driver [ 16.239758] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302bc5efe] [ 17.359568] EXT3 FS on sda8, internal journal [ 17.548923] kjournald starting. Commit interval 5 seconds [ 17.549240] EXT3 FS on sda7, internal journal [ 17.549246] EXT3-fs: mounted filesystem with ordered data mode. [ 20.229709] sky2 eth1: enabling interface [ 20.234421] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 20.480872] iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 20.480980] iwlagn 0000:06:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 20.481244] firmware: requesting iwlwifi-4965-2.ucode [ 20.773990] Registered led device: iwl-phy0:radio [ 20.774012] Registered led device: iwl-phy0:assoc [ 20.774031] Registered led device: iwl-phy0:RX [ 20.774049] Registered led device: iwl-phy0:TX [ 20.788745] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.569778] wlan0: authenticate with AP 00:80:5a:4b:7f:e4 [ 21.571587] wlan0: authenticated [ 21.571592] wlan0: associate with AP 00:80:5a:4b:7f:e4 [ 21.581294] wlan0: RX AssocResp from 00:80:5a:4b:7f:e4 (capab=0x411 status=0 aid=1) [ 21.581298] wlan0: associated [ 21.588354] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 32.400090] wlan0: no IPv6 routers present [ 38.850075] CE: hpet increasing min_delta_ns to 15000 nsec [ 107.350647] CE: hpet increasing min_delta_ns to 22500 nsec [ 110.311637] CE: hpet increasing min_delta_ns to 33750 nsec [ 170.452330] CE: hpet increasing min_delta_ns to 50624 nsec [ 176.491402] CE: hpet increasing min_delta_ns to 75936 nsec