[ 0.000000] BIOS EBDA/lowmem at: 0009ac00/0009ac00 [ 0.000000] Linux version 2.6.28-rc5-git4 (root@looptop) (gcc version 4.3.2 (Gentoo 4.3.2 p1.0) ) #2 SMP PREEMPT Fri Nov 28 19:38:04 IST 2008 [ 0.000000] Command line: video=uvesafb:1280x800-32,mtrr:3 root=/dev/sda2 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable) [ 0.000000] BIOS-e820: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf7ae000 - 00000000bf7f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7f0000 - 00000000bf800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0xbf7a0 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf7a0000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf7a0000 page 4k [ 0.000000] kernel direct mapping tables up to bf7a0000 @ 10000-15000 [ 0.000000] last_map_addr: bf7a0000 end: bf7a0000 [ 0.000000] ACPI: RSDP 000F8CA0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT BF7A0000, 0044 (r1 040808 RSDT1328 20080408 MSFT 97) [ 0.000000] ACPI: FACP BF7A0200, 0084 (r2 040808 FACP1328 20080408 MSFT 97) [ 0.000000] ACPI: DSDT BF7A05B0, 5ACD (r1 A1221 A1221000 0 INTL 20051117) [ 0.000000] ACPI: FACS BF7AE000, 0040 [ 0.000000] ACPI: APIC BF7A0390, 005C (r1 040808 APIC1328 20080408 MSFT 97) [ 0.000000] ACPI: MCFG BF7A03F0, 003C (r1 040808 OEMMCFG 20080408 MSFT 97) [ 0.000000] ACPI: SLIC BF7A0430, 0176 (r1 040808 SLIC1328 20080408 MSFT 97) [ 0.000000] ACPI: OEMB BF7AE040, 0071 (r1 040808 OEMB1328 20080408 MSFT 97) [ 0.000000] ACPI: HPET BF7A6080, 0038 (r1 040808 OEMHPET 20080408 MSFT 97) [ 0.000000] ACPI: GSCI BF7AE0C0, 2024 (r1 040808 GMCHSCI 20080408 MSFT 97) [ 0.000000] ACPI: SSDT BF7B0A90, 04F0 (r1 PmRef CpuPm 3000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 00bf7a0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000755a58] TEXT DATA BSS ==> [0000200000 - 0000755a58] [ 0.000000] #3 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000] [ 0.000000] #4 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000bf7a0 [ 0.000000] On node 0 totalpages: 784170 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1472 pages reserved [ 0.000000] DMA zone: 2450 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10667 pages used for memmap [ 0.000000] DMA32 zone: 769525 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: bf800000:3f600000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771975 [ 0.000000] Kernel command line: video=uvesafb:1280x800-32,mtrr:3 root=/dev/sda2 [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2194.452 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] Memory: 3081140k/3137152k available (3223k kernel code, 472k absent, 54968k reserved, 1305k data, 384k init) [ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.90 BogoMIPS (lpj=2194452) [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] CPU0: Thermal monitoring enabled (TM2) [ 0.000999] using mwait in idle threads. [ 0.000999] ACPI: Core revision 20080926 [ 0.013040] Setting APIC routing to flat [ 0.013464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023548] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.023996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=2194393) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.095272] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 0.096076] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.097000] Brought up 2 CPUs [ 0.097075] Total of 2 processors activated (8777.69 BogoMIPS). [ 0.097219] net_namespace: 1232 bytes [ 0.097219] regulator: core version 0.5 [ 0.097219] NET: Registered protocol family 16 [ 0.097999] ACPI: bus type pci registered [ 0.098073] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.098089] PCI: Not using MMCONFIG. [ 0.098163] PCI: Using configuration type 1 for base access [ 0.101277] ACPI: EC: Look up EC in DSDT [ 0.108739] ACPI: Interpreter enabled [ 0.108815] ACPI: (supports S0 S1 S3 S4 S5) [ 0.109101] ACPI: Using IOAPIC for interrupt routing [ 0.109251] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.109727] ACPI: EC: ---> status = 0x08 [ 0.109728] ACPI: EC: transaction start [ 0.109730] ACPI: EC: <--- command = 0x82 [ 0.109835] ACPI: EC: ---> status = 0x1b [ 0.109838] ACPI: EC: ---> data = 0x90 [ 0.108999] ACPI: EC: ~~~> interrupt [ 0.109003] ACPI: EC: ---> status = 0x18 [ 0.109005] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.109939] ACPI: EC: transaction end [ 0.109942] ACPI: EC: ---> status = 0x18 [ 0.109943] ACPI: EC: transaction start [ 0.109944] ACPI: EC: <--- command = 0x80 [ 0.110041] ACPI: EC: ~~~> interrupt [ 0.110044] ACPI: EC: ---> status = 0x18 [ 0.110045] ACPI: EC: <--- data = 0x31 [ 0.109998] ACPI: EC: ~~~> interrupt [ 0.110001] ACPI: EC: ---> status = 0x12 [ 0.110075] ACPI: EC: ---> status = 0x12 [ 0.110096] ACPI: EC: ~~~> interrupt [ 0.110099] ACPI: EC: ---> status = 0x12 [ 0.110006] ACPI: EC: ~~~> interrupt [ 0.110006] ACPI: EC: ---> status = 0x12 [ 0.110146] ACPI: EC: ~~~> interrupt [ 0.110149] ACPI: EC: ---> status = 0x12 [ 0.110178] ACPI: EC: ---> status = 0x12 [ 0.110281] ACPI: EC: ---> status = 0x12 [ 0.110384] ACPI: EC: ---> status = 0x12 [ 0.110487] ACPI: EC: ---> status = 0x12 [ 0.110590] ACPI: EC: ---> status = 0x12 [ 0.110693] ACPI: EC: ---> status = 0x12 [ 0.110796] ACPI: EC: ---> status = 0x12 [ 0.110899] ACPI: EC: ---> status = 0x12 [ 0.111003] ACPI: EC: ---> status = 0x12 [ 0.111106] ACPI: EC: ---> status = 0x12 [ 0.111209] ACPI: EC: ---> status = 0x12 [ 0.111312] ACPI: EC: ---> status = 0x12 [ 0.111415] ACPI: EC: ---> status = 0x12 [ 0.111518] ACPI: EC: ---> status = 0x12 [ 0.110997] ACPI: EC: ~~~> interrupt [ 0.111000] ACPI: EC: ---> status = 0x11 [ 0.111004] ACPI: EC: ---> data = 0x09 [ 0.111613] ACPI: EC: ~~~> interrupt [ 0.111616] ACPI: EC: ---> status = 0x10 [ 0.111621] ACPI: EC: transaction end [ 0.111622] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.111008] ACPI: EC: ~~~> interrupt [ 0.111008] ACPI: EC: ---> status = 0x10 [ 0.111718] ACPI: EC: ---> status = 0x10 [ 0.111721] ACPI: EC: ---> status = 0x10 [ 0.111722] ACPI: EC: transaction start [ 0.111726] ACPI: EC: <--- command = 0x83 [ 0.111831] ACPI: EC: ---> status = 0x08 [ 0.111932] ACPI: EC: transaction end [ 0.111935] ACPI: EC: ---> status = 0x08 [ 0.114019] ACPI: EC: ---> status = 0x08 [ 0.114021] ACPI: EC: transaction start [ 0.114025] ACPI: EC: <--- command = 0x82 [ 0.114130] ACPI: EC: ---> status = 0x1b [ 0.114133] ACPI: EC: ---> data = 0x90 [ 0.114234] ACPI: EC: transaction end [ 0.114237] ACPI: EC: ---> status = 0x18 [ 0.114259] ACPI: EC: ~~~> interrupt [ 0.114262] ACPI: EC: ---> status = 0x18 [ 0.114263] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.114268] ACPI: EC: ---> status = 0x18 [ 0.114269] ACPI: EC: transaction start [ 0.114274] ACPI: EC: <--- command = 0x80 [ 0.114379] ACPI: EC: ---> status = 0x18 [ 0.114380] ACPI: EC: <--- data = 0x31 [ 0.114484] ACPI: EC: ---> status = 0x13 [ 0.114487] ACPI: EC: ---> data = 0x09 [ 0.114588] ACPI: EC: transaction end [ 0.114591] ACPI: EC: ---> status = 0x10 [ 0.114598] ACPI: EC: ---> status = 0x10 [ 0.114601] ACPI: EC: ---> status = 0x10 [ 0.114601] ACPI: EC: transaction start [ 0.113999] ACPI: EC: ~~~> interrupt [ 0.114002] ACPI: EC: ---> status = 0x10 [ 0.114003] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.114643] ACPI: EC: <--- command = 0x83 [ 0.613954] ACPI: EC: missing confirmations, switch off interrupt mode. [ 0.614135] ACPI: EC: ---> status = 0x08 [ 0.614236] ACPI: EC: transaction end [ 0.614239] ACPI: EC: ---> status = 0x08 [ 0.614455] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.620787] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.623028] ACPI: EC: ---> status = 0x08 [ 0.623028] ACPI: EC: transaction start [ 0.623028] ACPI: EC: <--- command = 0x82 [ 0.623098] ACPI: EC: ---> status = 0x1b [ 0.623101] ACPI: EC: ---> data = 0x90 [ 0.623202] ACPI: EC: transaction end [ 0.623205] ACPI: EC: ---> status = 0x18 [ 0.623211] ACPI: EC: ---> status = 0x18 [ 0.623212] ACPI: EC: transaction start [ 0.623217] ACPI: EC: <--- command = 0x80 [ 0.623322] ACPI: EC: ---> status = 0x18 [ 0.623323] ACPI: EC: <--- data = 0x31 [ 0.623428] ACPI: EC: ---> status = 0x13 [ 0.623431] ACPI: EC: ---> data = 0x09 [ 0.623532] ACPI: EC: transaction end [ 0.623535] ACPI: EC: ---> status = 0x10 [ 0.623541] ACPI: EC: ---> status = 0x10 [ 0.623544] ACPI: EC: ---> status = 0x10 [ 0.623545] ACPI: EC: transaction start [ 0.623550] ACPI: EC: <--- command = 0x83 [ 0.623654] ACPI: EC: ---> status = 0x08 [ 0.624012] ACPI: EC: transaction end [ 0.624015] ACPI: EC: ---> status = 0x08 [ 0.624087] ACPI: EC: ---> status = 0x08 [ 0.624088] ACPI: EC: transaction start [ 0.624093] ACPI: EC: <--- command = 0x82 [ 0.624198] ACPI: EC: ---> status = 0x1b [ 0.624201] ACPI: EC: ---> data = 0x90 [ 0.624302] ACPI: EC: transaction end [ 0.624305] ACPI: EC: ---> status = 0x18 [ 0.624326] ACPI: EC: ~~~> interrupt [ 0.624329] ACPI: EC: ---> status = 0x18 [ 0.624334] ACPI: EC: ---> status = 0x18 [ 0.624335] ACPI: EC: transaction start [ 0.624341] ACPI: EC: <--- command = 0x80 [ 0.624445] ACPI: EC: ---> status = 0x18 [ 0.624446] ACPI: EC: <--- data = 0x31 [ 0.624551] ACPI: EC: ---> status = 0x13 [ 0.624553] ACPI: EC: ---> data = 0x09 [ 0.624654] ACPI: EC: transaction end [ 0.624657] ACPI: EC: ---> status = 0x10 [ 0.624664] ACPI: EC: ---> status = 0x10 [ 0.624667] ACPI: EC: ---> status = 0x10 [ 0.624668] ACPI: EC: transaction start [ 0.624672] ACPI: EC: <--- command = 0x83 [ 0.624777] ACPI: EC: ---> status = 0x08 [ 0.624878] ACPI: EC: transaction end [ 0.624881] ACPI: EC: ---> status = 0x08 [ 0.629119] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.629119] ACPI: EC: driver started in poll mode [ 0.630077] ACPI: No dock devices found. [ 0.630240] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.630336] pci 0000:00:02.0: reg 10 64bit mmio: [0xfda00000-0xfdafffff] [ 0.630336] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.630336] pci 0000:00:02.0: reg 20 io port: [0xb480-0xb487] [ 0.630336] pci 0000:00:02.1: reg 10 64bit mmio: [0xfdb00000-0xfdbfffff] [ 0.630336] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] [ 0.630336] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 0.630336] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdcff000-0xfdcff3ff] [ 0.630336] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.630401] pci 0000:00:1a.7: PME# disabled [ 0.630527] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdcf8000-0xfdcfbfff] [ 0.630966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.631047] pci 0000:00:1b.0: PME# disabled [ 0.631185] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.631265] pci 0000:00:1c.0: PME# disabled [ 0.631406] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.631486] pci 0000:00:1c.1: PME# disabled [ 0.631627] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.631707] pci 0000:00:1c.2: PME# disabled [ 0.631845] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f] [ 0.631905] pci 0000:00:1d.1: reg 20 io port: [0xc000-0xc01f] [ 0.631972] pci 0000:00:1d.2: reg 20 io port: [0xc080-0xc09f] [ 0.632038] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdcff400-0xfdcff7ff] [ 0.632083] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.632164] pci 0000:00:1d.7: PME# disabled [ 0.632392] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.632501] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.632614] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.632621] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.632628] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.632635] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.632642] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.632710] pci 0000:00:1f.2: reg 10 io port: [0xcc00-0xcc07] [ 0.632717] pci 0000:00:1f.2: reg 14 io port: [0xc880-0xc883] [ 0.632724] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807] [ 0.632731] pci 0000:00:1f.2: reg 1c io port: [0xc480-0xc483] [ 0.632739] pci 0000:00:1f.2: reg 20 io port: [0xc400-0xc41f] [ 0.632746] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdcff800-0xfdcfffff] [ 0.632765] pci 0000:00:1f.2: PME# supported from D3hot [ 0.632844] pci 0000:00:1f.2: PME# disabled [ 0.632997] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff] [ 0.633001] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe000000-0xfebfffff] [ 0.633008] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfa000000-0xfcffffff] [ 0.633083] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.633111] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] [ 0.633139] pci 0000:03:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.633155] pci 0000:03:00.0: supports D1 D2 [ 0.633156] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.633239] pci 0000:03:00.0: PME# disabled [ 0.633382] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff] [ 0.633386] pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.633504] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdefe000-0xfdefffff] [ 0.633597] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.633701] pci 0000:02:00.0: PME# disabled [ 0.633876] pci 0000:00:1c.2: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.633934] pci 0000:01:04.0: reg 10 32bit mmio: [0xfddff000-0xfddff07f] [ 0.633991] pci 0000:01:04.0: supports D1 D2 [ 0.633992] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot [ 0.634073] pci 0000:01:04.0: PME# disabled [ 0.634192] pci 0000:01:04.1: reg 10 32bit mmio: [0xfddff400-0xfddff4ff] [ 0.634244] pci 0000:01:04.1: supports D1 D2 [ 0.634245] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot [ 0.634326] pci 0000:01:04.1: PME# disabled [ 0.634443] pci 0000:01:04.2: reg 10 32bit mmio: [0xfddff800-0xfddff87f] [ 0.634497] pci 0000:01:04.2: supports D1 D2 [ 0.634498] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot [ 0.634579] pci 0000:01:04.2: PME# disabled [ 0.634699] pci 0000:01:04.3: reg 10 32bit mmio: [0xfddffc00-0xfddffcff] [ 0.634753] pci 0000:01:04.3: supports D1 D2 [ 0.634755] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot [ 0.634835] pci 0000:01:04.3: PME# disabled [ 0.634978] pci 0000:00:1e.0: transparent bridge [ 0.635059] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.635091] bus 00 -> node 0 [ 0.635098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.635405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.635557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.635708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.635859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.659492] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.660675] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.661462] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.662250] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.663037] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.663806] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.664546] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.665448] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.666953] ACPI: WMI: Mapper loaded [ 0.667033] SCSI subsystem initialized [ 0.667033] libata version 3.00 loaded. [ 0.667033] usbcore: registered new interface driver usbfs [ 0.667047] usbcore: registered new interface driver hub [ 0.667059] usbcore: registered new device driver usb [ 0.667059] PCI: Using ACPI for IRQ routing [ 0.675978] PCI-GART: No AMD GART found. [ 0.676060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.676305] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.678957] Switched to high resolution mode on CPU 0 [ 0.679185] Switched to high resolution mode on CPU 1 [ 0.689007] pnp: PnP ACPI init [ 0.689086] ACPI: bus type pnp registered [ 0.690937] ACPI: EC: ---> status = 0x08 [ 0.690939] ACPI: EC: transaction start [ 0.690944] ACPI: EC: <--- command = 0x82 [ 0.691049] ACPI: EC: ---> status = 0x1b [ 0.691052] ACPI: EC: ---> data = 0x90 [ 0.691153] ACPI: EC: transaction end [ 0.691156] ACPI: EC: ---> status = 0x18 [ 0.691163] ACPI: EC: ---> status = 0x18 [ 0.691164] ACPI: EC: transaction start [ 0.691169] ACPI: EC: <--- command = 0x80 [ 0.691274] ACPI: EC: ---> status = 0x18 [ 0.691275] ACPI: EC: <--- data = 0x31 [ 0.691380] ACPI: EC: ---> status = 0x12 [ 0.691483] ACPI: EC: ---> status = 0x11 [ 0.691485] ACPI: EC: ---> data = 0x09 [ 0.691586] ACPI: EC: transaction end [ 0.691589] ACPI: EC: ---> status = 0x10 [ 0.691596] ACPI: EC: ---> status = 0x10 [ 0.691599] ACPI: EC: ---> status = 0x10 [ 0.691600] ACPI: EC: transaction start [ 0.691604] ACPI: EC: <--- command = 0x83 [ 0.691709] ACPI: EC: ---> status = 0x08 [ 0.691810] ACPI: EC: transaction end [ 0.691813] ACPI: EC: ---> status = 0x08 [ 0.693092] pnp: PnP ACPI: found 13 devices [ 0.693168] ACPI: ACPI bus type pnp unregistered [ 0.693250] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.693334] system 00:08: ioport range 0x400-0x41f has been reserved [ 0.693413] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.693491] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.693570] system 00:08: ioport range 0x500-0x53f has been reserved [ 0.693649] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.693728] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.693807] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.693890] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.693969] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.694057] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.694139] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.694218] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.694296] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.694376] system 00:0c: iomem range 0x100000-0xbf7fffff could not be reserved [ 0.694483] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.699453] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.699533] pci 0000:00:1c.0: IO window: 0xe000-0xefff [ 0.699614] pci 0000:00:1c.0: MEM window: 0xfe000000-0xfebfffff [ 0.699695] pci 0000:00:1c.0: PREFETCH window: 0x000000fa000000-0x000000fcffffff [ 0.699807] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.699886] pci 0000:00:1c.1: IO window: 0xd000-0xdfff [ 0.699967] pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff [ 0.700051] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.700134] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 [ 0.700210] pci 0000:00:1c.2: IO window: disabled [ 0.700291] pci 0000:00:1c.2: MEM window: 0xfde00000-0xfdefffff [ 0.700371] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.700454] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.700531] pci 0000:00:1e.0: IO window: disabled [ 0.700611] pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff [ 0.700692] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.700783] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.700866] pci 0000:00:1c.0: setting latency timer to 64 [ 0.700874] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.700956] pci 0000:00:1c.1: setting latency timer to 64 [ 0.700964] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.701049] pci 0000:00:1c.2: setting latency timer to 64 [ 0.701057] pci 0000:00:1e.0: setting latency timer to 64 [ 0.701060] bus: 00 index 0 io port: [0x00-0xffff] [ 0.701137] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.701214] bus: 04 index 0 io port: [0xe000-0xefff] [ 0.701291] bus: 04 index 1 mmio: [0xfe000000-0xfebfffff] [ 0.701368] bus: 04 index 2 mmio: [0xfa000000-0xfcffffff] [ 0.701445] bus: 04 index 3 mmio: [0x0-0x0] [ 0.701520] bus: 03 index 0 io port: [0xd000-0xdfff] [ 0.701597] bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff] [ 0.701673] bus: 03 index 2 mmio: [0x0-0x0] [ 0.701749] bus: 03 index 3 mmio: [0x0-0x0] [ 0.701823] bus: 02 index 0 mmio: [0x0-0x0] [ 0.701899] bus: 02 index 1 mmio: [0xfde00000-0xfdefffff] [ 0.701975] bus: 02 index 2 mmio: [0x0-0x0] [ 0.702053] bus: 02 index 3 mmio: [0x0-0x0] [ 0.702128] bus: 01 index 0 mmio: [0x0-0x0] [ 0.702203] bus: 01 index 1 mmio: [0xfdd00000-0xfddfffff] [ 0.702280] bus: 01 index 2 mmio: [0x0-0x0] [ 0.702355] bus: 01 index 3 io port: [0x00-0xffff] [ 0.702431] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.702515] NET: Registered protocol family 2 [ 0.737042] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.737647] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.739782] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.740571] TCP: Hash tables configured (established 262144 bind 65536) [ 0.740651] TCP reno registered [ 0.752088] NET: Registered protocol family 1 [ 0.754627] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.756634] VFS: Disk quotas dquot_6.5.1 [ 0.756764] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.757131] msgmni has been set to 6018 [ 0.757228] io scheduler noop registered [ 0.757307] io scheduler anticipatory registered [ 0.757383] io scheduler deadline registered [ 0.757502] io scheduler cfq registered (default) [ 0.757587] pci 0000:00:02.0: Boot video device [ 0.758179] ACPI: EC: ---> status = 0x08 [ 0.758180] ACPI: EC: transaction start [ 0.758186] ACPI: EC: <--- command = 0x82 [ 0.758293] ACPI: EC: ---> status = 0x1b [ 0.758296] ACPI: EC: ---> data = 0x90 [ 0.758397] ACPI: EC: transaction end [ 0.758400] ACPI: EC: ---> status = 0x18 [ 0.758407] ACPI: EC: ---> status = 0x18 [ 0.758408] ACPI: EC: transaction start [ 0.758414] ACPI: EC: <--- command = 0x80 [ 0.758519] ACPI: EC: ---> status = 0x18 [ 0.758520] ACPI: EC: <--- data = 0x31 [ 0.758625] ACPI: EC: ---> status = 0x12 [ 0.758728] ACPI: EC: ---> status = 0x11 [ 0.758731] ACPI: EC: ---> data = 0x09 [ 0.758832] ACPI: EC: transaction end [ 0.758835] ACPI: EC: ---> status = 0x10 [ 0.758841] ACPI: EC: ---> status = 0x10 [ 0.758844] ACPI: EC: ---> status = 0x10 [ 0.758845] ACPI: EC: transaction start [ 0.758850] ACPI: EC: <--- command = 0x83 [ 0.758954] ACPI: EC: ---> status = 0x08 [ 0.759055] ACPI: EC: transaction end [ 0.759058] ACPI: EC: ---> status = 0x08 [ 0.760175] ACPI: EC: ---> status = 0x08 [ 0.760176] ACPI: EC: transaction start [ 0.760181] ACPI: EC: <--- command = 0x82 [ 0.760287] ACPI: EC: ---> status = 0x1b [ 0.760290] ACPI: EC: ---> data = 0x90 [ 0.760391] ACPI: EC: transaction end [ 0.760394] ACPI: EC: ---> status = 0x18 [ 0.760414] ACPI: EC: ~~~> interrupt [ 0.760417] ACPI: EC: ---> status = 0x18 [ 0.760425] ACPI: EC: ---> status = 0x18 [ 0.760426] ACPI: EC: transaction start [ 0.760431] ACPI: EC: <--- command = 0x80 [ 0.760536] ACPI: EC: ---> status = 0x18 [ 0.760537] ACPI: EC: <--- data = 0x31 [ 0.760642] ACPI: EC: ---> status = 0x12 [ 0.760745] ACPI: EC: ---> status = 0x11 [ 0.760748] ACPI: EC: ---> data = 0x09 [ 0.760848] ACPI: EC: transaction end [ 0.760851] ACPI: EC: ---> status = 0x10 [ 0.760858] ACPI: EC: ---> status = 0x10 [ 0.760861] ACPI: EC: ---> status = 0x10 [ 0.760862] ACPI: EC: transaction start [ 0.760866] ACPI: EC: <--- command = 0x83 [ 0.760971] ACPI: EC: ---> status = 0x08 [ 0.761072] ACPI: EC: transaction end [ 0.761075] ACPI: EC: ---> status = 0x08 [ 0.761903] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.761951] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.762063] pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X [ 0.762078] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.762108] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.762134] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.762220] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.762269] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.762376] pcieport-driver 0000:00:1c.1: irq 46 for MSI/MSI-X [ 0.762391] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.762418] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.762445] pci_express 0000:00:1c.1:pcie03: allocate port service [ 0.762530] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.762576] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.762683] pcieport-driver 0000:00:1c.2: irq 45 for MSI/MSI-X [ 0.762698] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.762723] pci_express 0000:00:1c.2:pcie02: allocate port service [ 0.762748] pci_express 0000:00:1c.2:pcie03: allocate port service [ 0.763461] uvesafb: Intel Corporation, Intel(r)GM965/PM965/GL960 Graphics Controller, Hardware Version 0.0, OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS, VBE v3.0 [ 0.807564] uvesafb: VBIOS/hardware supports DDC2 transfers [ 0.820076] uvesafb: monitor limits: vf = 60 Hz, hf = 49 kHz, clk = 68 MHz [ 0.820323] uvesafb: scrolling: redraw [ 1.088707] Console: switching to colour frame buffer device 160x50 [ 1.091330] uvesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 7616k, total 7616k [ 1.091381] fb0: VESA VGA frame buffer device [ 1.091465] ACPI: EC: ---> status = 0x08 [ 1.091467] ACPI: EC: transaction start [ 1.091473] ACPI: EC: <--- command = 0x82 [ 1.091578] ACPI: EC: ---> status = 0x1b [ 1.091581] ACPI: EC: ---> data = 0x90 [ 1.091682] ACPI: EC: transaction end [ 1.091685] ACPI: EC: ---> status = 0x18 [ 1.091691] ACPI: EC: ---> status = 0x18 [ 1.091692] ACPI: EC: transaction start [ 1.091697] ACPI: EC: <--- command = 0x80 [ 1.091802] ACPI: EC: ---> status = 0x18 [ 1.091803] ACPI: EC: <--- data = 0x30 [ 1.091907] ACPI: EC: ---> status = 0x13 [ 1.091910] ACPI: EC: ---> data = 0x03 [ 1.092011] ACPI: EC: transaction end [ 1.092014] ACPI: EC: ---> status = 0x10 [ 1.092038] ACPI: EC: ~~~> interrupt [ 1.092041] ACPI: EC: ---> status = 0x10 [ 1.092046] ACPI: EC: ---> status = 0x10 [ 1.092049] ACPI: EC: ---> status = 0x10 [ 1.092050] ACPI: EC: transaction start [ 1.092056] ACPI: EC: <--- command = 0x83 [ 1.092161] ACPI: EC: ---> status = 0x08 [ 1.092263] ACPI: EC: transaction end [ 1.092266] ACPI: EC: ---> status = 0x08 [ 1.092368] ACPI: AC Adapter [ADP1] (on-line) [ 1.092461] ACPI: EC: ---> status = 0x08 [ 1.092462] ACPI: EC: transaction start [ 1.092467] ACPI: EC: <--- command = 0x82 [ 1.092572] ACPI: EC: ---> status = 0x1b [ 1.092575] ACPI: EC: ---> data = 0x90 [ 1.092676] ACPI: EC: transaction end [ 1.092678] ACPI: EC: ---> status = 0x18 [ 1.092700] ACPI: EC: ~~~> interrupt [ 1.092703] ACPI: EC: ---> status = 0x18 [ 1.092708] ACPI: EC: ---> status = 0x18 [ 1.092709] ACPI: EC: transaction start [ 1.092713] ACPI: EC: <--- command = 0x80 [ 1.092818] ACPI: EC: ---> status = 0x18 [ 1.092819] ACPI: EC: <--- data = 0x31 [ 1.092924] ACPI: EC: ---> status = 0x13 [ 1.092927] ACPI: EC: ---> data = 0x09 [ 1.093028] ACPI: EC: transaction end [ 1.093031] ACPI: EC: ---> status = 0x10 [ 1.093037] ACPI: EC: ---> status = 0x10 [ 1.093040] ACPI: EC: ---> status = 0x10 [ 1.093041] ACPI: EC: transaction start [ 1.093054] ACPI: EC: ~~~> interrupt [ 1.093057] ACPI: EC: ---> status = 0x10 [ 1.093082] ACPI: EC: <--- command = 0x83 [ 1.093187] ACPI: EC: ---> status = 0x08 [ 1.093289] ACPI: EC: transaction end [ 1.093292] ACPI: EC: ---> status = 0x08 [ 1.093388] ACPI: EC: ---> status = 0x08 [ 1.093389] ACPI: EC: transaction start [ 1.093393] ACPI: EC: <--- command = 0x82 [ 1.093498] ACPI: EC: ---> status = 0x1b [ 1.093501] ACPI: EC: ---> data = 0x90 [ 1.093602] ACPI: EC: transaction end [ 1.093605] ACPI: EC: ---> status = 0x18 [ 1.093612] ACPI: EC: ---> status = 0x18 [ 1.093613] ACPI: EC: transaction start [ 1.093618] ACPI: EC: <--- command = 0x80 [ 1.093722] ACPI: EC: ---> status = 0x18 [ 1.093724] ACPI: EC: <--- data = 0x39 [ 1.093828] ACPI: EC: ---> status = 0x13 [ 1.093831] ACPI: EC: ---> data = 0x0a [ 1.093932] ACPI: EC: transaction end [ 1.093935] ACPI: EC: ---> status = 0x10 [ 1.093942] ACPI: EC: ---> status = 0x10 [ 1.093945] ACPI: EC: ---> status = 0x10 [ 1.093946] ACPI: EC: transaction start [ 1.093950] ACPI: EC: <--- command = 0x83 [ 1.094055] ACPI: EC: ---> status = 0x08 [ 1.094156] ACPI: EC: transaction end [ 1.094159] ACPI: EC: ---> status = 0x08 [ 1.094178] ACPI: EC: ---> status = 0x08 [ 1.094179] ACPI: EC: transaction start [ 1.094184] ACPI: EC: <--- command = 0x82 [ 1.094290] ACPI: EC: ---> status = 0x1b [ 1.094293] ACPI: EC: ---> data = 0x90 [ 1.094394] ACPI: EC: transaction end [ 1.094397] ACPI: EC: ---> status = 0x18 [ 1.094418] ACPI: EC: ~~~> interrupt [ 1.094421] ACPI: EC: ---> status = 0x18 [ 1.094426] ACPI: EC: ---> status = 0x18 [ 1.094427] ACPI: EC: transaction start [ 1.094432] ACPI: EC: <--- command = 0x80 [ 1.094537] ACPI: EC: ---> status = 0x18 [ 1.094538] ACPI: EC: <--- data = 0x38 [ 1.094643] ACPI: EC: ---> status = 0x13 [ 1.094646] ACPI: EC: ---> data = 0x28 [ 1.094747] ACPI: EC: transaction end [ 1.094750] ACPI: EC: ---> status = 0x10 [ 1.094771] ACPI: EC: ~~~> interrupt [ 1.094774] ACPI: EC: ---> status = 0x10 [ 1.094778] ACPI: EC: ---> status = 0x10 [ 1.094781] ACPI: EC: ---> status = 0x10 [ 1.094782] ACPI: EC: transaction start [ 1.094788] ACPI: EC: <--- command = 0x83 [ 1.094893] ACPI: EC: ---> status = 0x08 [ 1.094994] ACPI: EC: transaction end [ 1.094997] ACPI: EC: ---> status = 0x08 [ 1.095072] ACPI: EC: ---> status = 0x08 [ 1.095073] ACPI: EC: transaction start [ 1.095078] ACPI: EC: <--- command = 0x82 [ 1.095183] ACPI: EC: ---> status = 0x1b [ 1.095186] ACPI: EC: ---> data = 0x90 [ 1.095288] ACPI: EC: transaction end [ 1.095291] ACPI: EC: ---> status = 0x18 [ 1.095313] ACPI: EC: ~~~> interrupt [ 1.095316] ACPI: EC: ---> status = 0x18 [ 1.095320] ACPI: EC: ---> status = 0x18 [ 1.095321] ACPI: EC: transaction start [ 1.095326] ACPI: EC: <--- command = 0x80 [ 1.095430] ACPI: EC: ---> status = 0x1a [ 1.095533] ACPI: EC: ---> status = 0x18 [ 1.095534] ACPI: EC: <--- data = 0x45 [ 1.095639] ACPI: EC: ---> status = 0x13 [ 1.095642] ACPI: EC: ---> data = 0x09 [ 1.095743] ACPI: EC: transaction end [ 1.095746] ACPI: EC: ---> status = 0x10 [ 1.095752] ACPI: EC: ---> status = 0x10 [ 1.095755] ACPI: EC: ---> status = 0x10 [ 1.095756] ACPI: EC: transaction start [ 1.095760] ACPI: EC: <--- command = 0x83 [ 1.095865] ACPI: EC: ---> status = 0x08 [ 1.095966] ACPI: EC: transaction end [ 1.095969] ACPI: EC: ---> status = 0x08 [ 1.095989] ACPI: EC: ---> status = 0x08 [ 1.095990] ACPI: EC: transaction start [ 1.095995] ACPI: EC: <--- command = 0x82 [ 1.096100] ACPI: EC: ---> status = 0x1b [ 1.096103] ACPI: EC: ---> data = 0x90 [ 1.096204] ACPI: EC: transaction end [ 1.096206] ACPI: EC: ---> status = 0x18 [ 1.096213] ACPI: EC: ---> status = 0x18 [ 1.096214] ACPI: EC: transaction start [ 1.096219] ACPI: EC: <--- command = 0x80 [ 1.096325] ACPI: EC: ---> status = 0x18 [ 1.096326] ACPI: EC: <--- data = 0x44 [ 1.096431] ACPI: EC: ---> status = 0x12 [ 1.096534] ACPI: EC: ---> status = 0x11 [ 1.096537] ACPI: EC: ---> data = 0x9f [ 1.096638] ACPI: EC: transaction end [ 1.096641] ACPI: EC: ---> status = 0x10 [ 1.096647] ACPI: EC: ---> status = 0x10 [ 1.096650] ACPI: EC: ---> status = 0x10 [ 1.096651] ACPI: EC: transaction start [ 1.096656] ACPI: EC: <--- command = 0x83 [ 1.096760] ACPI: EC: ---> status = 0x08 [ 1.096861] ACPI: EC: transaction end [ 1.096864] ACPI: EC: ---> status = 0x08 [ 1.096938] ACPI: EC: ---> status = 0x08 [ 1.096939] ACPI: EC: transaction start [ 1.096943] ACPI: EC: <--- command = 0x82 [ 1.097048] ACPI: EC: ---> status = 0x1b [ 1.097051] ACPI: EC: ---> data = 0x90 [ 1.097152] ACPI: EC: transaction end [ 1.097155] ACPI: EC: ---> status = 0x18 [ 1.097176] ACPI: EC: ~~~> interrupt [ 1.097179] ACPI: EC: ---> status = 0x18 [ 1.097184] ACPI: EC: ---> status = 0x18 [ 1.097185] ACPI: EC: transaction start [ 1.097189] ACPI: EC: <--- command = 0x80 [ 1.097295] ACPI: EC: ---> status = 0x18 [ 1.097296] ACPI: EC: <--- data = 0x3b [ 1.097401] ACPI: EC: ---> status = 0x12 [ 1.097504] ACPI: EC: ---> status = 0x11 [ 1.097507] ACPI: EC: ---> data = 0x39 [ 1.097608] ACPI: EC: transaction end [ 1.097611] ACPI: EC: ---> status = 0x10 [ 1.097618] ACPI: EC: ---> status = 0x10 [ 1.097620] ACPI: EC: ---> status = 0x10 [ 1.097621] ACPI: EC: transaction start [ 1.097626] ACPI: EC: <--- command = 0x83 [ 1.097731] ACPI: EC: ---> status = 0x08 [ 1.097832] ACPI: EC: transaction end [ 1.097835] ACPI: EC: ---> status = 0x08 [ 1.097854] ACPI: EC: ---> status = 0x08 [ 1.097856] ACPI: EC: transaction start [ 1.097860] ACPI: EC: <--- command = 0x82 [ 1.097965] ACPI: EC: ---> status = 0x1b [ 1.097968] ACPI: EC: ---> data = 0x90 [ 1.098069] ACPI: EC: transaction end [ 1.098072] ACPI: EC: ---> status = 0x18 [ 1.098078] ACPI: EC: ---> status = 0x18 [ 1.098079] ACPI: EC: transaction start [ 1.098084] ACPI: EC: <--- command = 0x80 [ 1.098189] ACPI: EC: ---> status = 0x18 [ 1.098190] ACPI: EC: <--- data = 0x3a [ 1.098296] ACPI: EC: ---> status = 0x13 [ 1.098299] ACPI: EC: ---> data = 0xd0 [ 1.098400] ACPI: EC: transaction end [ 1.098403] ACPI: EC: ---> status = 0x10 [ 1.098424] ACPI: EC: ~~~> interrupt [ 1.098427] ACPI: EC: ---> status = 0x10 [ 1.098432] ACPI: EC: ---> status = 0x10 [ 1.098435] ACPI: EC: ---> status = 0x10 [ 1.098436] ACPI: EC: transaction start [ 1.098440] ACPI: EC: <--- command = 0x83 [ 1.098545] ACPI: EC: ---> status = 0x08 [ 1.098646] ACPI: EC: transaction end [ 1.098649] ACPI: EC: ---> status = 0x08 [ 1.099087] ACPI: EC: ---> status = 0x08 [ 1.099088] ACPI: EC: transaction start [ 1.099093] ACPI: EC: <--- command = 0x82 [ 1.099198] ACPI: EC: ---> status = 0x1b [ 1.099201] ACPI: EC: ---> data = 0x90 [ 1.099302] ACPI: EC: transaction end [ 1.099305] ACPI: EC: ---> status = 0x18 [ 1.099311] ACPI: EC: ---> status = 0x18 [ 1.099312] ACPI: EC: transaction start [ 1.099317] ACPI: EC: <--- command = 0x80 [ 1.099421] ACPI: EC: ---> status = 0x18 [ 1.099422] ACPI: EC: <--- data = 0x31 [ 1.099527] ACPI: EC: ---> status = 0x12 [ 1.099630] ACPI: EC: ---> status = 0x11 [ 1.099633] ACPI: EC: ---> data = 0x09 [ 1.099734] ACPI: EC: transaction end [ 1.099737] ACPI: EC: ---> status = 0x10 [ 1.099743] ACPI: EC: ---> status = 0x10 [ 1.099746] ACPI: EC: ---> status = 0x10 [ 1.099747] ACPI: EC: transaction start [ 1.099752] ACPI: EC: <--- command = 0x83 [ 1.099857] ACPI: EC: ---> status = 0x08 [ 1.099957] ACPI: EC: transaction end [ 1.099960] ACPI: EC: ---> status = 0x08 [ 1.099988] ACPI: EC: ---> status = 0x08 [ 1.099989] ACPI: EC: transaction start [ 1.099993] ACPI: EC: <--- command = 0x82 [ 1.100098] ACPI: EC: ---> status = 0x1b [ 1.100101] ACPI: EC: ---> data = 0x90 [ 1.100202] ACPI: EC: transaction end [ 1.100205] ACPI: EC: ---> status = 0x18 [ 1.100211] ACPI: EC: ---> status = 0x18 [ 1.100212] ACPI: EC: transaction start [ 1.100217] ACPI: EC: <--- command = 0x80 [ 1.100324] ACPI: EC: ---> status = 0x18 [ 1.100325] ACPI: EC: <--- data = 0x30 [ 1.100430] ACPI: EC: ---> status = 0x13 [ 1.100433] ACPI: EC: ---> data = 0x03 [ 1.100534] ACPI: EC: transaction end [ 1.100537] ACPI: EC: ---> status = 0x10 [ 1.100543] ACPI: EC: ---> status = 0x10 [ 1.100546] ACPI: EC: ---> status = 0x10 [ 1.100547] ACPI: EC: transaction start [ 1.100551] ACPI: EC: <--- command = 0x83 [ 1.100656] ACPI: EC: ---> status = 0x08 [ 1.100757] ACPI: EC: transaction end [ 1.100760] ACPI: EC: ---> status = 0x08 [ 1.100787] ACPI: EC: ---> status = 0x08 [ 1.100788] ACPI: EC: transaction start [ 1.100793] ACPI: EC: <--- command = 0x82 [ 1.100897] ACPI: EC: ---> status = 0x1b [ 1.100900] ACPI: EC: ---> data = 0x90 [ 1.101001] ACPI: EC: transaction end [ 1.101004] ACPI: EC: ---> status = 0x18 [ 1.101024] ACPI: EC: ~~~> interrupt [ 1.101027] ACPI: EC: ---> status = 0x18 [ 1.101034] ACPI: EC: ---> status = 0x18 [ 1.101035] ACPI: EC: transaction start [ 1.101040] ACPI: EC: <--- command = 0x80 [ 1.101145] ACPI: EC: ---> status = 0x18 [ 1.101147] ACPI: EC: <--- data = 0x31 [ 1.101254] ACPI: EC: ---> status = 0x13 [ 1.101257] ACPI: EC: ---> data = 0x09 [ 1.101358] ACPI: EC: transaction end [ 1.101361] ACPI: EC: ---> status = 0x10 [ 1.101380] ACPI: EC: ~~~> interrupt [ 1.101383] ACPI: EC: ---> status = 0x10 [ 1.101390] ACPI: EC: ---> status = 0x10 [ 1.101394] ACPI: EC: ---> status = 0x10 [ 1.101395] ACPI: EC: transaction start [ 1.101407] ACPI: EC: ~~~> interrupt [ 1.101411] ACPI: EC: ---> status = 0x10 [ 1.101419] ACPI: EC: <--- command = 0x83 [ 1.101524] ACPI: EC: ---> status = 0x08 [ 1.101625] ACPI: EC: transaction end [ 1.101628] ACPI: EC: ---> status = 0x08 [ 1.101657] ACPI: EC: ---> status = 0x08 [ 1.101658] ACPI: EC: transaction start [ 1.101663] ACPI: EC: <--- command = 0x82 [ 1.101767] ACPI: EC: ---> status = 0x1b [ 1.101770] ACPI: EC: ---> data = 0x90 [ 1.101871] ACPI: EC: transaction end [ 1.101874] ACPI: EC: ---> status = 0x18 [ 1.101896] ACPI: EC: ~~~> interrupt [ 1.101899] ACPI: EC: ---> status = 0x18 [ 1.101904] ACPI: EC: ---> status = 0x18 [ 1.101905] ACPI: EC: transaction start [ 1.101910] ACPI: EC: <--- command = 0x80 [ 1.102014] ACPI: EC: ---> status = 0x18 [ 1.102016] ACPI: EC: <--- data = 0x30 [ 1.102120] ACPI: EC: ---> status = 0x13 [ 1.102123] ACPI: EC: ---> data = 0x03 [ 1.102224] ACPI: EC: transaction end [ 1.102227] ACPI: EC: ---> status = 0x10 [ 1.102248] ACPI: EC: ~~~> interrupt [ 1.102250] ACPI: EC: ---> status = 0x10 [ 1.102259] ACPI: EC: ---> status = 0x10 [ 1.102262] ACPI: EC: ---> status = 0x10 [ 1.102263] ACPI: EC: transaction start [ 1.102269] ACPI: EC: <--- command = 0x83 [ 1.102374] ACPI: EC: ---> status = 0x08 [ 1.102475] ACPI: EC: transaction end [ 1.102478] ACPI: EC: ---> status = 0x08 [ 1.102505] ACPI: EC: ---> status = 0x08 [ 1.102506] ACPI: EC: transaction start [ 1.102511] ACPI: EC: <--- command = 0x82 [ 1.102616] ACPI: EC: ---> status = 0x1a [ 1.102719] ACPI: EC: ---> status = 0x19 [ 1.102722] ACPI: EC: ---> data = 0x90 [ 1.102823] ACPI: EC: transaction end [ 1.102826] ACPI: EC: ---> status = 0x18 [ 1.102832] ACPI: EC: ---> status = 0x18 [ 1.102833] ACPI: EC: transaction start [ 1.102838] ACPI: EC: <--- command = 0x80 [ 1.102942] ACPI: EC: ---> status = 0x18 [ 1.102943] ACPI: EC: <--- data = 0x31 [ 1.103048] ACPI: EC: ---> status = 0x13 [ 1.103051] ACPI: EC: ---> data = 0x09 [ 1.103152] ACPI: EC: transaction end [ 1.103155] ACPI: EC: ---> status = 0x10 [ 1.103161] ACPI: EC: ---> status = 0x10 [ 1.103164] ACPI: EC: ---> status = 0x10 [ 1.103165] ACPI: EC: transaction start [ 1.103170] ACPI: EC: <--- command = 0x83 [ 1.103276] ACPI: EC: ---> status = 0x08 [ 1.103377] ACPI: EC: transaction end [ 1.103380] ACPI: EC: ---> status = 0x08 [ 1.103436] ACPI: EC: ---> status = 0x08 [ 1.103437] ACPI: EC: transaction start [ 1.103441] ACPI: EC: <--- command = 0x82 [ 1.103546] ACPI: EC: ---> status = 0x1b [ 1.103549] ACPI: EC: ---> data = 0x90 [ 1.103650] ACPI: EC: transaction end [ 1.103653] ACPI: EC: ---> status = 0x18 [ 1.103660] ACPI: EC: ---> status = 0x18 [ 1.103661] ACPI: EC: transaction start [ 1.103665] ACPI: EC: <--- command = 0x80 [ 1.103770] ACPI: EC: ---> status = 0x18 [ 1.103771] ACPI: EC: <--- data = 0x49 [ 1.103876] ACPI: EC: ---> status = 0x13 [ 1.103879] ACPI: EC: ---> data = 0x09 [ 1.103980] ACPI: EC: transaction end [ 1.103983] ACPI: EC: ---> status = 0x10 [ 1.104004] ACPI: EC: ~~~> interrupt [ 1.104007] ACPI: EC: ---> status = 0x10 [ 1.104012] ACPI: EC: ---> status = 0x10 [ 1.104015] ACPI: EC: ---> status = 0x10 [ 1.104015] ACPI: EC: transaction start [ 1.104021] ACPI: EC: <--- command = 0x83 [ 1.104126] ACPI: EC: ---> status = 0x08 [ 1.104227] ACPI: EC: transaction end [ 1.104230] ACPI: EC: ---> status = 0x08 [ 1.104254] ACPI: EC: ---> status = 0x08 [ 1.104255] ACPI: EC: transaction start [ 1.104259] ACPI: EC: <--- command = 0x82 [ 1.104364] ACPI: EC: ---> status = 0x1b [ 1.104367] ACPI: EC: ---> data = 0x90 [ 1.104468] ACPI: EC: transaction end [ 1.104471] ACPI: EC: ---> status = 0x18 [ 1.104477] ACPI: EC: ---> status = 0x18 [ 1.104478] ACPI: EC: transaction start [ 1.104483] ACPI: EC: <--- command = 0x80 [ 1.104588] ACPI: EC: ---> status = 0x18 [ 1.104589] ACPI: EC: <--- data = 0x48 [ 1.104694] ACPI: EC: ---> status = 0x12 [ 1.104796] ACPI: EC: ---> status = 0x11 [ 1.104799] ACPI: EC: ---> data = 0x70 [ 1.104900] ACPI: EC: transaction end [ 1.104903] ACPI: EC: ---> status = 0x10 [ 1.104910] ACPI: EC: ---> status = 0x10 [ 1.104913] ACPI: EC: ---> status = 0x10 [ 1.104914] ACPI: EC: transaction start [ 1.104918] ACPI: EC: <--- command = 0x83 [ 1.105023] ACPI: EC: ---> status = 0x08 [ 1.105124] ACPI: EC: transaction end [ 1.105127] ACPI: EC: ---> status = 0x08 [ 1.105186] ACPI: EC: ---> status = 0x08 [ 1.105187] ACPI: EC: transaction start [ 1.105192] ACPI: EC: <--- command = 0x82 [ 1.105298] ACPI: EC: ---> status = 0x1b [ 1.105301] ACPI: EC: ---> data = 0x90 [ 1.105402] ACPI: EC: transaction end [ 1.105405] ACPI: EC: ---> status = 0x18 [ 1.105412] ACPI: EC: ---> status = 0x18 [ 1.105412] ACPI: EC: transaction start [ 1.105417] ACPI: EC: <--- command = 0x80 [ 1.105522] ACPI: EC: ---> status = 0x18 [ 1.105523] ACPI: EC: <--- data = 0x4b [ 1.105628] ACPI: EC: ---> status = 0x13 [ 1.105631] ACPI: EC: ---> data = 0x40 [ 1.105732] ACPI: EC: transaction end [ 1.105735] ACPI: EC: ---> status = 0x10 [ 1.105756] ACPI: EC: ~~~> interrupt [ 1.105759] ACPI: EC: ---> status = 0x10 [ 1.105764] ACPI: EC: ---> status = 0x10 [ 1.105767] ACPI: EC: ---> status = 0x10 [ 1.105768] ACPI: EC: transaction start [ 1.105773] ACPI: EC: <--- command = 0x83 [ 1.105878] ACPI: EC: ---> status = 0x08 [ 1.105979] ACPI: EC: transaction end [ 1.105982] ACPI: EC: ---> status = 0x08 [ 1.106002] ACPI: EC: ---> status = 0x08 [ 1.106003] ACPI: EC: transaction start [ 1.106008] ACPI: EC: <--- command = 0x82 [ 1.106113] ACPI: EC: ---> status = 0x1b [ 1.106116] ACPI: EC: ---> data = 0x90 [ 1.106217] ACPI: EC: transaction end [ 1.106219] ACPI: EC: ---> status = 0x18 [ 1.106226] ACPI: EC: ---> status = 0x18 [ 1.106227] ACPI: EC: transaction start [ 1.106231] ACPI: EC: <--- command = 0x80 [ 1.106338] ACPI: EC: ---> status = 0x18 [ 1.106339] ACPI: EC: <--- data = 0x4a [ 1.106444] ACPI: EC: ---> status = 0x13 [ 1.106447] ACPI: EC: ---> data = 0x9a [ 1.106547] ACPI: EC: transaction end [ 1.106550] ACPI: EC: ---> status = 0x10 [ 1.106572] ACPI: EC: ~~~> interrupt [ 1.106575] ACPI: EC: ---> status = 0x10 [ 1.106580] ACPI: EC: ---> status = 0x10 [ 1.106583] ACPI: EC: ---> status = 0x10 [ 1.106584] ACPI: EC: transaction start [ 1.106589] ACPI: EC: <--- command = 0x83 [ 1.106694] ACPI: EC: ---> status = 0x08 [ 1.106795] ACPI: EC: transaction end [ 1.106798] ACPI: EC: ---> status = 0x08 [ 1.206118] ACPI: Battery Slot [BAT1] (battery present) [ 1.206240] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.206284] ACPI: Power Button (FF) [PWRF] [ 1.206365] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0D:00/input/input1 [ 1.206388] ACPI: EC: ---> status = 0x08 [ 1.206389] ACPI: EC: transaction start [ 1.206393] ACPI: EC: <--- command = 0x82 [ 1.206498] ACPI: EC: ---> status = 0x1b [ 1.206502] ACPI: EC: ---> data = 0x90 [ 1.206603] ACPI: EC: transaction end [ 1.206606] ACPI: EC: ---> status = 0x18 [ 1.206626] ACPI: EC: ~~~> interrupt [ 1.206629] ACPI: EC: ---> status = 0x18 [ 1.206637] ACPI: EC: ---> status = 0x18 [ 1.206638] ACPI: EC: transaction start [ 1.206643] ACPI: EC: <--- command = 0x80 [ 1.206748] ACPI: EC: ---> status = 0x18 [ 1.206749] ACPI: EC: <--- data = 0x31 [ 1.206854] ACPI: EC: ---> status = 0x13 [ 1.206857] ACPI: EC: ---> data = 0x09 [ 1.206958] ACPI: EC: transaction end [ 1.206961] ACPI: EC: ---> status = 0x10 [ 1.206981] ACPI: EC: ~~~> interrupt [ 1.206984] ACPI: EC: ---> status = 0x10 [ 1.206991] ACPI: EC: ---> status = 0x10 [ 1.207009] ACPI: EC: ~~~> interrupt [ 1.207012] ACPI: EC: ---> status = 0x10 [ 1.207020] ACPI: EC: ---> status = 0x10 [ 1.207021] ACPI: EC: transaction start [ 1.207026] ACPI: EC: <--- command = 0x82 [ 1.207131] ACPI: EC: ---> status = 0x1b [ 1.207134] ACPI: EC: ---> data = 0x90 [ 1.207235] ACPI: EC: transaction end [ 1.207238] ACPI: EC: ---> status = 0x18 [ 1.207247] ACPI: EC: ---> status = 0x18 [ 1.207248] ACPI: EC: transaction start [ 1.207260] ACPI: EC: ~~~> interrupt [ 1.207263] ACPI: EC: ---> status = 0x18 [ 1.207271] ACPI: EC: <--- command = 0x80 [ 1.207376] ACPI: EC: ---> status = 0x18 [ 1.207377] ACPI: EC: <--- data = 0x30 [ 1.207482] ACPI: EC: ---> status = 0x13 [ 1.207485] ACPI: EC: ---> data = 0x03 [ 1.207585] ACPI: EC: transaction end [ 1.207588] ACPI: EC: ---> status = 0x10 [ 1.207609] ACPI: EC: ~~~> interrupt [ 1.207612] ACPI: EC: ---> status = 0x10 [ 1.207619] ACPI: EC: ---> status = 0x10 [ 1.207637] ACPI: EC: ~~~> interrupt [ 1.207640] ACPI: EC: ---> status = 0x10 [ 1.207644] ACPI: EC: ---> status = 0x10 [ 1.207645] ACPI: EC: transaction start [ 1.207650] ACPI: EC: <--- command = 0x83 [ 1.207755] ACPI: EC: ---> status = 0x08 [ 1.207856] ACPI: EC: transaction end [ 1.207859] ACPI: EC: ---> status = 0x08 [ 1.207868] ACPI: EC: ---> status = 0x08 [ 1.207869] ACPI: EC: transaction start [ 1.207874] ACPI: EC: <--- command = 0x83 [ 1.207979] ACPI: EC: ---> status = 0x08 [ 1.208080] ACPI: EC: transaction end [ 1.208083] ACPI: EC: ---> status = 0x08 [ 1.208093] ACPI: EC: ---> status = 0x08 [ 1.208094] ACPI: EC: transaction start [ 1.208099] ACPI: EC: <--- command = 0x82 [ 1.208142] ACPI: Lid Switch [LID0] [ 1.208204] ACPI: EC: ---> status = 0x1b [ 1.208207] ACPI: EC: ---> data = 0x90 [ 1.208218] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0E:00/input/input2 [ 1.208281] ACPI: Sleep Button (CM) [SLPB] [ 1.208308] ACPI: EC: transaction end [ 1.208311] ACPI: EC: ---> status = 0x18 [ 1.208318] ACPI: EC: ---> status = 0x18 [ 1.208319] ACPI: EC: transaction start [ 1.208324] ACPI: EC: <--- command = 0x80 [ 1.208385] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 1.208429] ACPI: EC: ---> status = 0x18 [ 1.208430] ACPI: EC: <--- data = 0x30 [ 1.208433] ACPI: Power Button (CM) [PWRB] [ 1.208535] ACPI: EC: ---> status = 0x13 [ 1.208538] ACPI: EC: ---> data = 0x03 [ 1.208638] ACPI: EC: transaction end [ 1.208641] ACPI: EC: ---> status = 0x10 [ 1.208664] ACPI: EC: ~~~> interrupt [ 1.208667] ACPI: EC: ---> status = 0x10 [ 1.208671] ACPI: EC: ---> status = 0x10 [ 1.208674] ACPI: EC: ---> status = 0x10 [ 1.208675] ACPI: EC: transaction start [ 1.208680] ACPI: EC: <--- command = 0x83 [ 1.208785] ACPI: EC: ---> status = 0x08 [ 1.208886] ACPI: EC: transaction end [ 1.208889] ACPI: EC: ---> status = 0x08 [ 1.209186] ACPI: SSDT BF7B01C0, 0297 (r1 PmRef Cpu0Ist 3000 INTL 20051117) [ 1.209757] ACPI: SSDT BF7B04F0, 0594 (r1 PmRef Cpu0Cst 3001 INTL 20051117) [ 1.210116] ACPI: EC: ---> status = 0x08 [ 1.210118] ACPI: EC: transaction start [ 1.210122] ACPI: EC: <--- command = 0x82 [ 1.210227] ACPI: EC: ---> status = 0x1b [ 1.210230] ACPI: EC: ---> data = 0x90 [ 1.210285] Monitor-Mwait will be used to enter C-1 state [ 1.210288] Monitor-Mwait will be used to enter C-2 state [ 1.210289] Monitor-Mwait will be used to enter C-3 state [ 1.210320] ACPI: CPU0 (power states:<7>ACPI: EC: transaction end [ 1.210334] ACPI: EC: ---> status = 0x18 [ 1.210356] C1[C1]<7>ACPI: EC: ~~~> interrupt [ 1.210359] ACPI: EC: ---> status = 0x18 [ 1.210364] ACPI: EC: ---> status = 0x18 [ 1.210364] ACPI: EC: transaction start [ 1.210369] ACPI: EC: <--- command = 0x80 [ 1.210400] C2[C2] C3[C3]) [ 1.210459] processor ACPI_CPU:00: registered as cooling_device0 [ 1.210474] ACPI: EC: ---> status = 0x18 [ 1.210474] ACPI: EC: <--- data = 0x31 [ 1.210579] ACPI: EC: ---> status = 0x13 [ 1.210582] ACPI: EC: ---> data = 0x09 [ 1.210683] ACPI: EC: transaction end [ 1.210686] ACPI: EC: ---> status = 0x10 [ 1.210693] ACPI: EC: ---> status = 0x10 [ 1.210696] ACPI: EC: ---> status = 0x10 [ 1.210697] ACPI: EC: transaction start [ 1.210701] ACPI: EC: <--- command = 0x83 [ 1.210806] ACPI: EC: ---> status = 0x08 [ 1.210907] ACPI: EC: transaction end [ 1.210910] ACPI: EC: ---> status = 0x08 [ 1.211027] ACPI: SSDT BF7B00F0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117) [ 1.211473] ACPI: SSDT BF7B0460, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117) [ 1.211830] ACPI: EC: ---> status = 0x08 [ 1.211832] ACPI: EC: transaction start [ 1.211836] ACPI: EC: <--- command = 0x82 [ 1.211941] ACPI: EC: ---> status = 0x1b [ 1.211944] ACPI: EC: ---> data = 0x90 [ 1.212045] ACPI: EC: transaction end [ 1.212048] ACPI: EC: ---> status = 0x18 [ 1.212070] ACPI: EC: ~~~> interrupt [ 1.212073] ACPI: EC: ---> status = 0x18 [ 1.212091] ACPI: EC: ---> status = 0x18 [ 1.212093] ACPI: EC: transaction start [ 1.212097] ACPI: EC: <--- command = 0x80 [ 1.212109] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.212187] processor ACPI_CPU:01: registered as cooling_device1 [ 1.212240] ACPI: EC: ---> status = 0x18 [ 1.212241] ACPI: EC: <--- data = 0x30 [ 1.213041] ACPI: EC: ---> status = 0x11 [ 1.213045] ACPI: EC: ---> data = 0x03 [ 1.213146] ACPI: EC: transaction end [ 1.213149] ACPI: EC: ---> status = 0x10 [ 1.213158] ACPI: EC: ---> status = 0x10 [ 1.213159] ACPI: EC: transaction start [ 1.213163] ACPI: EC: <--- command = 0x82 [ 1.213269] ACPI: EC: ---> status = 0x1b [ 1.213272] ACPI: EC: ---> data = 0x90 [ 1.213373] ACPI: EC: transaction end [ 1.213376] ACPI: EC: ---> status = 0x18 [ 1.213383] ACPI: EC: ---> status = 0x18 [ 1.213384] ACPI: EC: transaction start [ 1.213388] ACPI: EC: <--- command = 0x80 [ 1.213493] ACPI: EC: ---> status = 0x18 [ 1.213494] ACPI: EC: <--- data = 0x31 [ 1.213599] ACPI: EC: ---> status = 0x13 [ 1.213602] ACPI: EC: ---> data = 0x09 [ 1.213703] ACPI: EC: transaction end [ 1.213706] ACPI: EC: ---> status = 0x10 [ 1.213712] ACPI: EC: ---> status = 0x10 [ 1.213715] ACPI: EC: ---> status = 0x10 [ 1.213716] ACPI: EC: transaction start [ 1.213729] ACPI: EC: ~~~> interrupt [ 1.213732] ACPI: EC: ---> status = 0x10 [ 1.213757] ACPI: EC: <--- command = 0x83 [ 1.213862] ACPI: EC: ---> status = 0x08 [ 1.213963] ACPI: EC: transaction end [ 1.213966] ACPI: EC: ---> status = 0x08 [ 1.216183] ACPI: EC: ---> status = 0x08 [ 1.216184] ACPI: EC: transaction start [ 1.216189] ACPI: EC: <--- command = 0x82 [ 1.216295] ACPI: EC: ---> status = 0x1b [ 1.216298] ACPI: EC: ---> data = 0x90 [ 1.216399] ACPI: EC: transaction end [ 1.216402] ACPI: EC: ---> status = 0x18 [ 1.216409] ACPI: EC: ---> status = 0x18 [ 1.216410] ACPI: EC: transaction start [ 1.216415] ACPI: EC: <--- command = 0x80 [ 1.216520] ACPI: EC: ---> status = 0x18 [ 1.216521] ACPI: EC: <--- data = 0x68 [ 1.216626] ACPI: EC: ---> status = 0x13 [ 1.216629] ACPI: EC: ---> data = 0x3e [ 1.216729] ACPI: EC: transaction end [ 1.216732] ACPI: EC: ---> status = 0x10 [ 1.216739] ACPI: EC: ---> status = 0x10 [ 1.216742] ACPI: EC: ---> status = 0x10 [ 1.216743] ACPI: EC: transaction start [ 1.216747] ACPI: EC: <--- command = 0x83 [ 1.216852] ACPI: EC: ---> status = 0x08 [ 1.216953] ACPI: EC: transaction end [ 1.216956] ACPI: EC: ---> status = 0x08 [ 1.217217] ACPI: EC: ---> status = 0x08 [ 1.217237] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.217244] ACPI: EC: ---> status = 0x08 [ 1.217245] ACPI: EC: transaction start [ 1.217254] ACPI: EC: <--- command = 0x82 [ 1.217358] ACPI: EC: ---> status = 0x1b [ 1.217361] ACPI: EC: ---> data = 0x90 [ 1.217462] ACPI: EC: transaction end [ 1.217465] ACPI: EC: ---> status = 0x18 [ 1.217487] ACPI: EC: ~~~> interrupt [ 1.217490] ACPI: EC: ---> status = 0x18 [ 1.217498] ACPI: EC: ---> status = 0x18 [ 1.217499] ACPI: EC: transaction start [ 1.217504] ACPI: EC: <--- command = 0x82 [ 1.217608] ACPI: EC: ---> status = 0x1b [ 1.217611] ACPI: EC: ---> data = 0x90 [ 1.217712] ACPI: EC: transaction end [ 1.217715] ACPI: EC: ---> status = 0x18 [ 1.217735] ACPI: EC: ~~~> interrupt [ 1.217738] ACPI: EC: ---> status = 0x18 [ 1.217747] ACPI: EC: ---> status = 0x18 [ 1.217748] ACPI: EC: transaction start [ 1.217752] ACPI: EC: <--- command = 0x80 [ 1.217857] ACPI: EC: ---> status = 0x18 [ 1.217858] ACPI: EC: <--- data = 0x68 [ 1.217963] ACPI: EC: ---> status = 0x13 [ 1.217966] ACPI: EC: ---> data = 0x3e [ 1.218068] ACPI: EC: transaction end [ 1.218071] ACPI: EC: ---> status = 0x10 [ 1.218078] ACPI: EC: ---> status = 0x10 [ 1.218081] ACPI: EC: ---> status = 0x10 [ 1.218082] ACPI: EC: transaction start [ 1.218094] ACPI: EC: ~~~> interrupt [ 1.218097] ACPI: EC: ---> status = 0x10 [ 1.218123] ACPI: EC: <--- command = 0x83 [ 1.218228] ACPI: EC: ---> status = 0x08 [ 1.218329] ACPI: EC: transaction end [ 1.218332] ACPI: EC: ---> status = 0x08 [ 1.218341] ACPI: EC: ---> status = 0x08 [ 1.218342] ACPI: EC: transaction start [ 1.218347] ACPI: EC: <--- command = 0x80 [ 1.218452] ACPI: EC: ---> status = 0x08 [ 1.218453] ACPI: EC: <--- data = 0x31 [ 1.218558] ACPI: EC: ---> status = 0x02 [ 1.218661] ACPI: EC: ---> status = 0x01 [ 1.218664] ACPI: EC: ---> data = 0x09 [ 1.218765] ACPI: EC: transaction end [ 1.218768] ACPI: EC: ---> status = 0x00 [ 1.218776] ACPI: EC: ---> status = 0x00 [ 1.218778] ACPI: EC: ---> status = 0x00 [ 1.218779] ACPI: EC: transaction start [ 1.218784] ACPI: EC: <--- command = 0x82 [ 1.218889] ACPI: EC: ---> status = 0x1b [ 1.218892] ACPI: EC: ---> data = 0x90 [ 1.218993] ACPI: EC: transaction end [ 1.218996] ACPI: EC: ---> status = 0x18 [ 1.219007] ACPI: EC: ---> status = 0x18 [ 1.219008] ACPI: EC: transaction start [ 1.219013] ACPI: EC: <--- command = 0x80 [ 1.219118] ACPI: EC: ---> status = 0x18 [ 1.219119] ACPI: EC: <--- data = 0x68 [ 1.219224] ACPI: EC: ---> status = 0x13 [ 1.219226] ACPI: EC: ---> data = 0x3e [ 1.219327] ACPI: EC: transaction end [ 1.219330] ACPI: EC: ---> status = 0x10 [ 1.219338] ACPI: EC: ---> status = 0x10 [ 1.219341] ACPI: EC: ---> status = 0x10 [ 1.219341] ACPI: EC: transaction start [ 1.219354] ACPI: EC: ~~~> interrupt [ 1.219357] ACPI: EC: ---> status = 0x10 [ 1.219365] ACPI: EC: <--- command = 0x83 [ 1.219470] ACPI: EC: ---> status = 0x08 [ 1.219571] ACPI: EC: transaction end [ 1.219574] ACPI: EC: ---> status = 0x08 [ 1.219584] ACPI: EC: ---> status = 0x08 [ 1.219585] ACPI: EC: transaction start [ 1.219590] ACPI: EC: <--- command = 0x82 [ 1.219695] ACPI: EC: ---> status = 0x1b [ 1.219698] ACPI: EC: ---> data = 0x90 [ 1.219700] ACPI: Thermal Zone [THRM] (64 C) [ 1.219799] ACPI: EC: transaction end [ 1.219802] ACPI: EC: ---> status = 0x18 [ 1.219808] ACPI: EC: ---> status = 0x18 [ 1.219809] ACPI: EC: transaction start [ 1.219814] ACPI: EC: <--- command = 0x80 [ 1.219919] ACPI: EC: ---> status = 0x18 [ 1.219920] ACPI: EC: <--- data = 0x49 [ 1.220025] ACPI: EC: ---> status = 0x13 [ 1.220028] ACPI: EC: ---> data = 0x09 [ 1.220129] ACPI: EC: transaction end [ 1.220132] ACPI: EC: ---> status = 0x10 [ 1.220138] ACPI: EC: ---> status = 0x10 [ 1.220141] ACPI: EC: ---> status = 0x10 [ 1.220142] ACPI: EC: transaction start [ 1.220154] ACPI: EC: ~~~> interrupt [ 1.220158] ACPI: EC: ---> status = 0x10 [ 1.220166] ACPI: EC: <--- command = 0x83 [ 1.220271] ACPI: EC: ---> status = 0x08 [ 1.220372] ACPI: EC: transaction end [ 1.220375] ACPI: EC: ---> status = 0x08 [ 1.220396] ACPI: EC: ---> status = 0x08 [ 1.220397] ACPI: EC: transaction start [ 1.220402] ACPI: EC: <--- command = 0x82 [ 1.220507] ACPI: EC: ---> status = 0x1b [ 1.220510] ACPI: EC: ---> data = 0x90 [ 1.220611] ACPI: EC: transaction end [ 1.220614] ACPI: EC: ---> status = 0x18 [ 1.220621] ACPI: EC: ---> status = 0x18 [ 1.220622] ACPI: EC: transaction start [ 1.220627] ACPI: EC: <--- command = 0x80 [ 1.220731] ACPI: EC: ---> status = 0x18 [ 1.220732] ACPI: EC: <--- data = 0x48 [ 1.220837] ACPI: EC: ---> status = 0x13 [ 1.220840] ACPI: EC: ---> data = 0x70 [ 1.220941] ACPI: EC: transaction end [ 1.220944] ACPI: EC: ---> status = 0x10 [ 1.220964] ACPI: EC: ~~~> interrupt [ 1.220967] ACPI: EC: ---> status = 0x10 [ 1.220974] ACPI: EC: ---> status = 0x10 [ 1.220977] ACPI: EC: ---> status = 0x10 [ 1.220978] ACPI: EC: transaction start [ 1.220990] ACPI: EC: ~~~> interrupt [ 1.220993] ACPI: EC: ---> status = 0x10 [ 1.221002] ACPI: EC: <--- command = 0x83 [ 1.221107] ACPI: EC: ---> status = 0x08 [ 1.221208] ACPI: EC: transaction end [ 1.221211] ACPI: EC: ---> status = 0x08 [ 1.221276] ACPI: EC: ---> status = 0x08 [ 1.221277] ACPI: EC: transaction start [ 1.221282] ACPI: EC: <--- command = 0x82 [ 1.221387] ACPI: EC: ---> status = 0x1b [ 1.221390] ACPI: EC: ---> data = 0x90 [ 1.221491] ACPI: EC: transaction end [ 1.221494] ACPI: EC: ---> status = 0x18 [ 1.221516] ACPI: EC: ~~~> interrupt [ 1.221519] ACPI: EC: ---> status = 0x18 [ 1.221524] ACPI: EC: ---> status = 0x18 [ 1.221524] ACPI: EC: transaction start [ 1.221529] ACPI: EC: <--- command = 0x80 [ 1.221634] ACPI: EC: ---> status = 0x1a [ 1.221737] ACPI: EC: ---> status = 0x18 [ 1.221738] ACPI: EC: <--- data = 0x4b [ 1.221843] ACPI: EC: ---> status = 0x13 [ 1.221846] ACPI: EC: ---> data = 0x40 [ 1.221947] ACPI: EC: transaction end [ 1.221950] ACPI: EC: ---> status = 0x10 [ 1.221969] ACPI: EC: ~~~> interrupt [ 1.221972] ACPI: EC: ---> status = 0x10 [ 1.221979] ACPI: EC: ---> status = 0x10 [ 1.221982] ACPI: EC: ---> status = 0x10 [ 1.221983] ACPI: EC: transaction start [ 1.221988] ACPI: EC: <--- command = 0x83 [ 1.222092] ACPI: EC: ---> status = 0x08 [ 1.222193] ACPI: EC: transaction end [ 1.222196] ACPI: EC: ---> status = 0x08 [ 1.222216] ACPI: EC: ---> status = 0x08 [ 1.222217] ACPI: EC: transaction start [ 1.222221] ACPI: EC: <--- command = 0x82 [ 1.222328] ACPI: EC: ---> status = 0x1b [ 1.222331] ACPI: EC: ---> data = 0x90 [ 1.222432] ACPI: EC: transaction end [ 1.222435] ACPI: EC: ---> status = 0x18 [ 1.222441] ACPI: EC: ---> status = 0x18 [ 1.222442] ACPI: EC: transaction start [ 1.222447] ACPI: EC: <--- command = 0x80 [ 1.222552] ACPI: EC: ---> status = 0x18 [ 1.222553] ACPI: EC: <--- data = 0x4a [ 1.222658] ACPI: EC: ---> status = 0x12 [ 1.222761] ACPI: EC: ---> status = 0x11 [ 1.222764] ACPI: EC: ---> data = 0x9a [ 1.222865] ACPI: EC: transaction end [ 1.222868] ACPI: EC: ---> status = 0x10 [ 1.222874] ACPI: EC: ---> status = 0x10 [ 1.222877] ACPI: EC: ---> status = 0x10 [ 1.222878] ACPI: EC: transaction start [ 1.222883] ACPI: EC: <--- command = 0x83 [ 1.222988] ACPI: EC: ---> status = 0x08 [ 1.223089] ACPI: EC: transaction end [ 1.223091] ACPI: EC: ---> status = 0x08 [ 1.273924] Linux agpgart interface v0.103 [ 1.274819] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.276703] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 1.280518] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.281598] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.282588] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.283620] r8169 0000:03:00.0: setting latency timer to 64 [ 1.283725] r8169 0000:03:00.0: irq 44 for MSI/MSI-X [ 1.283930] eth0: RTL8168b/8111b at 0xffffc20000048000, 00:1d:92:51:62:f7, XID 38000000 IRQ 44 [ 1.286484] Driver 'sd' needs updating - please use bus_type methods [ 1.287600] Driver 'sr' needs updating - please use bus_type methods [ 1.288759] ahci 0000:00:1f.2: version 3.0 [ 1.288769] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.289936] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.289997] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 1.291167] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems [ 1.292392] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.292565] scsi0 : ahci [ 1.293879] scsi1 : ahci [ 1.295160] scsi2 : ahci [ 1.296517] ata1: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff900 irq 43 [ 1.297793] ata2: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff980 irq 43 [ 1.299079] ata3: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcffa00 irq 43 [ 2.064024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.464053] ata1.00: ATA-8: TOSHIBA MK1646GSX, LB111A, max UDMA/100 [ 2.465410] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.467608] ata1.00: configured for UDMA/100 [ 2.784016] ata2: SATA link down (SStatus 0 SControl 300) [ 3.101015] ata3: SATA link down (SStatus 0 SControl 300) [ 3.113080] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5 [ 3.114635] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 3.116079] sd 0:0:0:0: [sda] Write Protect is off [ 3.117490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.117512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.119003] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 3.120469] sd 0:0:0:0: [sda] Write Protect is off [ 3.121925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.121945] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.123410] sda: sda1 sda2 sda3 sda4 [ 3.240856] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.242352] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.243790] ata_piix 0000:00:1f.1: version 2.12 [ 3.243799] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.245223] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 3.245285] scsi3 : ata_piix [ 3.246738] scsi4 : ata_piix [ 3.250239] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 3.251597] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 3.407403] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WA03, max UDMA/33 [ 3.414308] ata4.00: configured for UDMA/33 [ 3.417204] ata5: port disabled. ignoring. [ 3.417223] isa bounce pool size: 16 pages [ 3.421668] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WA03 PQ: 0 ANSI: 5 [ 3.426748] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.428119] Uniform CD-ROM driver Revision: 3.20 [ 3.429641] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.429710] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.431124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.432547] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.433992] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.433995] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.435467] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.440794] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.442190] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 3.442202] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdcff000 [ 3.453008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.454475] usb usb1: configuration #1 chosen from 1 choice [ 3.455909] hub 1-0:1.0: USB hub found [ 3.457290] hub 1-0:1.0: 4 ports detected [ 3.458832] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.460180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.461552] usb usb1: Product: EHCI Host Controller [ 3.462908] usb usb1: Manufacturer: Linux 2.6.28-rc5-git4 ehci_hcd [ 3.464269] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.465638] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.467022] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.467025] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.468443] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.473723] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.475080] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.475091] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdcff400 [ 3.486256] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.487694] usb usb2: configuration #1 chosen from 1 choice [ 3.489098] hub 2-0:1.0: USB hub found [ 3.490465] hub 2-0:1.0: 6 ports detected [ 3.491981] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.493338] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.494706] usb usb2: Product: EHCI Host Controller [ 3.496080] usb usb2: Manufacturer: Linux 2.6.28-rc5-git4 ehci_hcd [ 3.497482] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.498868] uhci_hcd: USB Universal Host Controller Interface driver [ 3.500245] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.501629] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.501632] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.503040] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.504417] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 3.505824] usb usb3: configuration #1 chosen from 1 choice [ 3.507170] hub 3-0:1.0: USB hub found [ 3.508479] hub 3-0:1.0: 2 ports detected [ 3.509917] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.511213] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.512501] usb usb3: Product: UHCI Host Controller [ 3.513834] usb usb3: Manufacturer: Linux 2.6.28-rc5-git4 uhci_hcd [ 3.515131] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.516450] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.517792] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.517795] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.519155] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.520494] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 3.521849] usb usb4: configuration #1 chosen from 1 choice [ 3.523161] hub 4-0:1.0: USB hub found [ 3.524421] hub 4-0:1.0: 2 ports detected [ 3.525817] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.527078] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.528335] usb usb4: Product: UHCI Host Controller [ 3.529583] usb usb4: Manufacturer: Linux 2.6.28-rc5-git4 uhci_hcd [ 3.530849] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.532126] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.533428] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.533431] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.534735] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 3.536045] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 3.537397] usb usb5: configuration #1 chosen from 1 choice [ 3.538731] hub 5-0:1.0: USB hub found [ 3.540009] hub 5-0:1.0: 2 ports detected [ 3.541422] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.542712] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.543988] usb usb5: Product: UHCI Host Controller [ 3.545263] usb usb5: Manufacturer: Linux 2.6.28-rc5-git4 uhci_hcd [ 3.546536] usb usb5: SerialNumber: 0000:00:1d.0 [ 3.547819] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.549126] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.549129] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.550431] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 3.551754] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000 [ 3.553121] usb usb6: configuration #1 chosen from 1 choice [ 3.554479] hub 6-0:1.0: USB hub found [ 3.555768] hub 6-0:1.0: 2 ports detected [ 3.557195] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.558502] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.559803] usb usb6: Product: UHCI Host Controller [ 3.561118] usb usb6: Manufacturer: Linux 2.6.28-rc5-git4 uhci_hcd [ 3.562444] usb usb6: SerialNumber: 0000:00:1d.1 [ 3.563753] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.565072] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.565075] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.566396] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 3.567707] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080 [ 3.569097] usb usb7: configuration #1 chosen from 1 choice [ 3.570434] hub 7-0:1.0: USB hub found [ 3.571714] hub 7-0:1.0: 2 ports detected [ 3.573137] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.574434] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.575726] usb usb7: Product: UHCI Host Controller [ 3.577010] usb usb7: Manufacturer: Linux 2.6.28-rc5-git4 uhci_hcd [ 3.578299] usb usb7: SerialNumber: 0000:00:1d.2 [ 3.579681] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.581314] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.582698] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.584008] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.585306] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.586580] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.587834] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.589210] mice: PS/2 mouse device common for all mice [ 3.630428] rtc_cmos 00:03: RTC can wake from S4 [ 3.631742] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.633026] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.634432] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.635731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.637194] cpuidle: using governor ladder [ 3.638793] cpuidle: using governor menu [ 3.640055] Marking TSC unstable due to TSC halts in idle [ 3.642410] usbcore: registered new interface driver hiddev [ 3.643722] usbcore: registered new interface driver usbhid [ 3.644969] usbhid: v2.6:USB HID core driver [ 3.646449] NET: Registered protocol family 17 [ 3.648505] rtc_cmos 00:03: setting system clock to 2008-11-28 20:10:36 UTC (1227903036) [ 3.895060] usb 2-6: new high speed USB device using ehci_hcd and address 3 [ 4.000058] Clocksource tsc unstable (delta = -218514401 ns) [ 4.011824] usb 2-6: configuration #1 chosen from 1 choice [ 4.013561] hub 2-6:1.0: USB hub found [ 4.015160] hub 2-6:1.0: 4 ports detected [ 4.018875] usb 2-6: New USB device found, idVendor=05e3, idProduct=0608 [ 4.020171] usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.021453] usb 2-6: Product: USB2.0 Hub [ 4.191520] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0 [ 4.222354] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 4.228080] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 4.308410] kjournald starting. Commit interval 5 seconds [ 4.308457] EXT3-fs: mounted filesystem with ordered data mode. [ 4.308469] VFS: Mounted root (ext3 filesystem) readonly. [ 4.308497] Freeing unused kernel memory: 384k freed [ 4.392157] usb 7-1: configuration #1 chosen from 1 choice [ 4.395463] usb 7-1: New USB device found, idVendor=147e, idProduct=2016 [ 4.396794] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.398134] usb 7-1: Product: Fingerprint Sensor [ 4.399455] usb 7-1: Manufacturer: TouchStrip [ 4.474281] usb 2-6.1: new low speed USB device using ehci_hcd and address 4 [ 4.572904] usb 2-6.1: configuration #1 chosen from 1 choice [ 4.582396] input: Microsoft Natural� Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input6 [ 4.602209] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.7-6.1/input0 [ 4.614742] input: Microsoft Natural� Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.1/input/input7 [ 4.636209] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural� Ergonomic Keyboard 4000] on usb-0000:00:1d.7-6.1/input1 [ 4.637917] usb 2-6.1: New USB device found, idVendor=045e, idProduct=00db [ 4.639430] usb 2-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.640973] usb 2-6.1: Product: Natural� Ergonomic Keyboard 4000 [ 4.642471] usb 2-6.1: Manufacturer: Microsoft [ 4.717403] usb 2-6.2: new low speed USB device using ehci_hcd and address 5 [ 4.814179] usb 2-6.2: configuration #1 chosen from 1 choice [ 4.824510] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input8 [ 4.841456] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.7-6.2/input0 [ 4.843498] usb 2-6.2: New USB device found, idVendor=046d, idProduct=c50e [ 4.843500] usb 2-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.843501] usb 2-6.2: Product: USB RECEIVER [ 4.843502] usb 2-6.2: Manufacturer: Logitech [ 4.913535] usb 2-6.4: new low speed USB device using ehci_hcd and address 6 [ 4.996131] usb 2-6.4: configuration #1 chosen from 1 choice [ 5.002411] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.4/2-6.4:1.0/input/input9 [ 5.020204] generic-usb 0003:045E:00A4.0004: input,hidraw3: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:1d.7-6.4/input0 [ 5.022131] usb 2-6.4: New USB device found, idVendor=045e, idProduct=00a4 [ 5.023889] usb 2-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.025613] usb 2-6.4: Product: Microsoft(R) Compact Optical Mouse [ 5.027348] usb 2-6.4: Manufacturer: Microsoft [ 7.517426] ACPI: EC: ---> status = 0x08 [ 7.517428] ACPI: EC: transaction start [ 7.517434] ACPI: EC: <--- command = 0x82 [ 7.517831] ACPI: EC: ---> status = 0x19 [ 7.517835] ACPI: EC: ---> data = 0x90 [ 7.517936] ACPI: EC: transaction end [ 7.517939] ACPI: EC: ---> status = 0x18 [ 7.517946] ACPI: EC: ---> status = 0x18 [ 7.517947] ACPI: EC: transaction start [ 7.517952] ACPI: EC: <--- command = 0x80 [ 7.518058] ACPI: EC: ---> status = 0x18 [ 7.518059] ACPI: EC: <--- data = 0x31 [ 7.518164] ACPI: EC: ---> status = 0x13 [ 7.518167] ACPI: EC: ---> data = 0x09 [ 7.518268] ACPI: EC: transaction end [ 7.518272] ACPI: EC: ---> status = 0x10 [ 7.518279] ACPI: EC: ---> status = 0x10 [ 7.518282] ACPI: EC: ---> status = 0x10 [ 7.518283] ACPI: EC: transaction start [ 7.518288] ACPI: EC: <--- command = 0x83 [ 7.518393] ACPI: EC: ---> status = 0x08 [ 7.518494] ACPI: EC: transaction end [ 7.518497] ACPI: EC: ---> status = 0x08 [ 7.518529] ACPI: EC: ---> status = 0x08 [ 7.518530] ACPI: EC: transaction start [ 7.518535] ACPI: EC: <--- command = 0x82 [ 7.518640] ACPI: EC: ---> status = 0x1b [ 7.518643] ACPI: EC: ---> data = 0x90 [ 7.518744] ACPI: EC: transaction end [ 7.518746] ACPI: EC: ---> status = 0x18 [ 7.518753] ACPI: EC: ---> status = 0x18 [ 7.518754] ACPI: EC: transaction start [ 7.518758] ACPI: EC: <--- command = 0x80 [ 7.518863] ACPI: EC: ---> status = 0x18 [ 7.518864] ACPI: EC: <--- data = 0x30 [ 7.518969] ACPI: EC: ---> status = 0x13 [ 7.518972] ACPI: EC: ---> data = 0x03 [ 7.519074] ACPI: EC: transaction end [ 7.519077] ACPI: EC: ---> status = 0x10 [ 7.519099] ACPI: EC: ~~~> interrupt [ 7.519103] ACPI: EC: ---> status = 0x10 [ 7.519107] ACPI: EC: ---> status = 0x10 [ 7.519110] ACPI: EC: ---> status = 0x10 [ 7.519111] ACPI: EC: transaction start [ 7.519116] ACPI: EC: <--- command = 0x83 [ 7.519221] ACPI: EC: ---> status = 0x08 [ 7.519322] ACPI: EC: transaction end [ 7.519325] ACPI: EC: ---> status = 0x08 [ 7.519352] ACPI: EC: ---> status = 0x08 [ 7.519353] ACPI: EC: transaction start [ 7.519358] ACPI: EC: <--- command = 0x82 [ 7.519463] ACPI: EC: ---> status = 0x1b [ 7.519466] ACPI: EC: ---> data = 0x90 [ 7.519567] ACPI: EC: transaction end [ 7.519570] ACPI: EC: ---> status = 0x18 [ 7.519576] ACPI: EC: ---> status = 0x18 [ 7.519577] ACPI: EC: transaction start [ 7.519582] ACPI: EC: <--- command = 0x80 [ 7.519686] ACPI: EC: ---> status = 0x18 [ 7.519687] ACPI: EC: <--- data = 0x31 [ 7.519792] ACPI: EC: ---> status = 0x13 [ 7.519795] ACPI: EC: ---> data = 0x09 [ 7.519896] ACPI: EC: transaction end [ 7.519899] ACPI: EC: ---> status = 0x10 [ 7.519921] ACPI: EC: ~~~> interrupt [ 7.519924] ACPI: EC: ---> status = 0x10 [ 7.519928] ACPI: EC: ---> status = 0x10 [ 7.519931] ACPI: EC: ---> status = 0x10 [ 7.519932] ACPI: EC: transaction start [ 7.519937] ACPI: EC: <--- command = 0x83 [ 7.520043] ACPI: EC: ---> status = 0x08 [ 7.520144] ACPI: EC: transaction end [ 7.520147] ACPI: EC: ---> status = 0x08 [ 7.520178] ACPI: EC: ---> status = 0x08 [ 7.520179] ACPI: EC: transaction start [ 7.520184] ACPI: EC: <--- command = 0x82 [ 7.520289] ACPI: EC: ---> status = 0x1b [ 7.520292] ACPI: EC: ---> data = 0x90 [ 7.520393] ACPI: EC: transaction end [ 7.520396] ACPI: EC: ---> status = 0x18 [ 7.520417] ACPI: EC: ~~~> interrupt [ 7.520420] ACPI: EC: ---> status = 0x18 [ 7.520425] ACPI: EC: ---> status = 0x18 [ 7.520426] ACPI: EC: transaction start [ 7.520431] ACPI: EC: <--- command = 0x80 [ 7.520535] ACPI: EC: ---> status = 0x18 [ 7.520536] ACPI: EC: <--- data = 0x30 [ 7.520641] ACPI: EC: ---> status = 0x12 [ 7.520744] ACPI: EC: ---> status = 0x11 [ 7.520747] ACPI: EC: ---> data = 0x03 [ 7.520848] ACPI: EC: transaction end [ 7.520851] ACPI: EC: ---> status = 0x10 [ 7.520858] ACPI: EC: ---> status = 0x10 [ 7.520860] ACPI: EC: ---> status = 0x10 [ 7.520861] ACPI: EC: transaction start [ 7.520866] ACPI: EC: <--- command = 0x83 [ 7.520970] ACPI: EC: ---> status = 0x08 [ 7.521073] ACPI: EC: transaction end [ 7.521076] ACPI: EC: ---> status = 0x08 [ 7.521103] ACPI: EC: ---> status = 0x08 [ 7.521104] ACPI: EC: transaction start [ 7.521109] ACPI: EC: <--- command = 0x82 [ 7.521214] ACPI: EC: ---> status = 0x1b [ 7.521217] ACPI: EC: ---> data = 0x90 [ 7.521318] ACPI: EC: transaction end [ 7.521321] ACPI: EC: ---> status = 0x18 [ 7.521342] ACPI: EC: ~~~> interrupt [ 7.521345] ACPI: EC: ---> status = 0x18 [ 7.521350] ACPI: EC: ---> status = 0x18 [ 7.521351] ACPI: EC: transaction start [ 7.521355] ACPI: EC: <--- command = 0x80 [ 7.521460] ACPI: EC: ---> status = 0x18 [ 7.521461] ACPI: EC: <--- data = 0x31 [ 7.521566] ACPI: EC: ---> status = 0x13 [ 7.521569] ACPI: EC: ---> data = 0x09 [ 7.521670] ACPI: EC: transaction end [ 7.521673] ACPI: EC: ---> status = 0x10 [ 7.521694] ACPI: EC: ~~~> interrupt [ 7.521697] ACPI: EC: ---> status = 0x10 [ 7.521701] ACPI: EC: ---> status = 0x10 [ 7.521704] ACPI: EC: ---> status = 0x10 [ 7.521705] ACPI: EC: transaction start [ 7.521709] ACPI: EC: <--- command = 0x83 [ 7.521814] ACPI: EC: ---> status = 0x08 [ 7.521915] ACPI: EC: transaction end [ 7.521918] ACPI: EC: ---> status = 0x08 [ 7.521974] ACPI: EC: ---> status = 0x08 [ 7.521975] ACPI: EC: transaction start [ 7.521980] ACPI: EC: <--- command = 0x82 [ 7.522086] ACPI: EC: ---> status = 0x1b [ 7.522089] ACPI: EC: ---> data = 0x90 [ 7.522190] ACPI: EC: transaction end [ 7.522193] ACPI: EC: ---> status = 0x18 [ 7.522214] ACPI: EC: ~~~> interrupt [ 7.522217] ACPI: EC: ---> status = 0x18 [ 7.522221] ACPI: EC: ---> status = 0x18 [ 7.522222] ACPI: EC: transaction start [ 7.522227] ACPI: EC: <--- command = 0x80 [ 7.522331] ACPI: EC: ---> status = 0x18 [ 7.522332] ACPI: EC: <--- data = 0x49 [ 7.522437] ACPI: EC: ---> status = 0x13 [ 7.522440] ACPI: EC: ---> data = 0x09 [ 7.522541] ACPI: EC: transaction end [ 7.522544] ACPI: EC: ---> status = 0x10 [ 7.522551] ACPI: EC: ---> status = 0x10 [ 7.522554] ACPI: EC: ---> status = 0x10 [ 7.522554] ACPI: EC: transaction start [ 7.522559] ACPI: EC: <--- command = 0x83 [ 7.522664] ACPI: EC: ---> status = 0x08 [ 7.522765] ACPI: EC: transaction end [ 7.522768] ACPI: EC: ---> status = 0x08 [ 7.522788] ACPI: EC: ---> status = 0x08 [ 7.522789] ACPI: EC: transaction start [ 7.522794] ACPI: EC: <--- command = 0x82 [ 7.522899] ACPI: EC: ---> status = 0x1b [ 7.522902] ACPI: EC: ---> data = 0x90 [ 7.523014] ACPI: EC: transaction end [ 7.523017] ACPI: EC: ---> status = 0x18 [ 7.523038] ACPI: EC: ~~~> interrupt [ 7.523041] ACPI: EC: ---> status = 0x18 [ 7.523045] ACPI: EC: ---> status = 0x18 [ 7.523046] ACPI: EC: transaction start [ 7.523051] ACPI: EC: <--- command = 0x80 [ 7.523156] ACPI: EC: ---> status = 0x18 [ 7.523157] ACPI: EC: <--- data = 0x48 [ 7.523262] ACPI: EC: ---> status = 0x13 [ 7.523265] ACPI: EC: ---> data = 0x70 [ 7.523366] ACPI: EC: transaction end [ 7.523369] ACPI: EC: ---> status = 0x10 [ 7.523390] ACPI: EC: ~~~> interrupt [ 7.523393] ACPI: EC: ---> status = 0x10 [ 7.523397] ACPI: EC: ---> status = 0x10 [ 7.523400] ACPI: EC: ---> status = 0x10 [ 7.523401] ACPI: EC: transaction start [ 7.523406] ACPI: EC: <--- command = 0x83 [ 7.523510] ACPI: EC: ---> status = 0x08 [ 7.523611] ACPI: EC: transaction end [ 7.523614] ACPI: EC: ---> status = 0x08 [ 7.523675] ACPI: EC: ---> status = 0x08 [ 7.523676] ACPI: EC: transaction start [ 7.523680] ACPI: EC: <--- command = 0x82 [ 7.523785] ACPI: EC: ---> status = 0x1b [ 7.523788] ACPI: EC: ---> data = 0x90 [ 7.523889] ACPI: EC: transaction end [ 7.523892] ACPI: EC: ---> status = 0x18 [ 7.523914] ACPI: EC: ~~~> interrupt [ 7.523917] ACPI: EC: ---> status = 0x18 [ 7.523921] ACPI: EC: ---> status = 0x18 [ 7.523922] ACPI: EC: transaction start [ 7.523927] ACPI: EC: <--- command = 0x80 [ 7.524033] ACPI: EC: ---> status = 0x18 [ 7.524034] ACPI: EC: <--- data = 0x4b [ 7.524139] ACPI: EC: ---> status = 0x13 [ 7.524142] ACPI: EC: ---> data = 0x40 [ 7.524243] ACPI: EC: transaction end [ 7.524246] ACPI: EC: ---> status = 0x10 [ 7.524254] ACPI: EC: ---> status = 0x10 [ 7.524257] ACPI: EC: ---> status = 0x10 [ 7.524258] ACPI: EC: transaction start [ 7.524262] ACPI: EC: <--- command = 0x83 [ 7.524368] ACPI: EC: ---> status = 0x08 [ 7.524469] ACPI: EC: transaction end [ 7.524472] ACPI: EC: ---> status = 0x08 [ 7.524491] ACPI: EC: ---> status = 0x08 [ 7.524493] ACPI: EC: transaction start [ 7.524497] ACPI: EC: <--- command = 0x82 [ 7.524602] ACPI: EC: ---> status = 0x1b [ 7.524605] ACPI: EC: ---> data = 0x90 [ 7.524706] ACPI: EC: transaction end [ 7.524709] ACPI: EC: ---> status = 0x18 [ 7.524715] ACPI: EC: ---> status = 0x18 [ 7.524716] ACPI: EC: transaction start [ 7.524721] ACPI: EC: <--- command = 0x80 [ 7.524826] ACPI: EC: ---> status = 0x18 [ 7.524827] ACPI: EC: <--- data = 0x4a [ 7.524932] ACPI: EC: ---> status = 0x13 [ 7.524935] ACPI: EC: ---> data = 0x9a [ 7.525037] ACPI: EC: transaction end [ 7.525040] ACPI: EC: ---> status = 0x10 [ 7.525062] ACPI: EC: ~~~> interrupt [ 7.525065] ACPI: EC: ---> status = 0x10 [ 7.525070] ACPI: EC: ---> status = 0x10 [ 7.525073] ACPI: EC: ---> status = 0x10 [ 7.525074] ACPI: EC: transaction start [ 7.525078] ACPI: EC: <--- command = 0x83 [ 7.525183] ACPI: EC: ---> status = 0x08 [ 7.525284] ACPI: EC: transaction end [ 7.525287] ACPI: EC: ---> status = 0x08 [ 7.861306] cfg80211: Calling CRDA to update world regulatory domain [ 7.960890] ACPI: EC: ---> status = 0x08 [ 7.960893] ACPI: EC: transaction start [ 7.960899] ACPI: EC: <--- command = 0x82 [ 7.961012] ACPI: EC: ---> status = 0x1a [ 7.961115] ACPI: EC: ---> status = 0x19 [ 7.961118] ACPI: EC: ---> data = 0x90 [ 7.961219] ACPI: EC: transaction end [ 7.961222] ACPI: EC: ---> status = 0x18 [ 7.961229] ACPI: EC: ---> status = 0x18 [ 7.961230] ACPI: EC: transaction start [ 7.961234] ACPI: EC: <--- command = 0x80 [ 7.961339] ACPI: EC: ---> status = 0x18 [ 7.961340] ACPI: EC: <--- data = 0xf1 [ 7.961445] ACPI: EC: ---> status = 0x13 [ 7.961448] ACPI: EC: ---> data = 0x08 [ 7.961549] ACPI: EC: transaction end [ 7.961552] ACPI: EC: ---> status = 0x10 [ 7.961575] ACPI: EC: ~~~> interrupt [ 7.961578] ACPI: EC: ---> status = 0x10 [ 7.961583] ACPI: EC: ---> status = 0x10 [ 7.961586] ACPI: EC: ---> status = 0x10 [ 7.961588] ACPI: EC: transaction start [ 7.961593] ACPI: EC: <--- command = 0x83 [ 7.961697] ACPI: EC: ---> status = 0x08 [ 7.961799] ACPI: EC: transaction end [ 7.961802] ACPI: EC: ---> status = 0x08 [ 7.962034] ACPI: EC: ---> status = 0x08 [ 7.962035] ACPI: EC: transaction start [ 7.962040] ACPI: EC: <--- command = 0x82 [ 7.962145] ACPI: EC: ---> status = 0x1b [ 7.962148] ACPI: EC: ---> data = 0x90 [ 7.962249] ACPI: EC: transaction end [ 7.962252] ACPI: EC: ---> status = 0x18 [ 7.962272] ACPI: EC: ~~~> interrupt [ 7.962275] ACPI: EC: ---> status = 0x18 [ 7.962283] ACPI: EC: ---> status = 0x18 [ 7.962283] ACPI: EC: transaction start [ 7.962288] ACPI: EC: <--- command = 0x81 [ 7.962393] ACPI: EC: ---> status = 0x18 [ 7.962395] ACPI: EC: <--- data = 0xf1 [ 7.962499] ACPI: EC: ---> status = 0x10 [ 7.962500] ACPI: EC: <--- data = 0x08 [ 7.962605] ACPI: EC: ---> status = 0x12 [ 7.962708] ACPI: EC: ---> status = 0x12 [ 7.962811] ACPI: EC: ---> status = 0x12 [ 7.962914] ACPI: EC: ---> status = 0x10 [ 7.963017] ACPI: EC: transaction end [ 7.963020] ACPI: EC: ---> status = 0x10 [ 7.963026] ACPI: EC: ---> status = 0x10 [ 7.963029] ACPI: EC: ---> status = 0x10 [ 7.963030] ACPI: EC: transaction start [ 7.963035] ACPI: EC: <--- command = 0x83 [ 7.963140] ACPI: EC: ---> status = 0x08 [ 7.963241] ACPI: EC: transaction end [ 7.963244] ACPI: EC: ---> status = 0x08 [ 7.963305] acpi device:27: registered as cooling_device2 [ 7.963420] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input10 [ 7.966336] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). [ 7.966338] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. [ 7.967267] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [ 7.967270] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. [ 7.978127] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.006179] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 8.092048] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8.092118] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.181526] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 8.181528] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 8.181634] iwlagn 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.181644] iwlagn 0000:02:00.0: setting latency timer to 64 [ 8.181699] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 8.231456] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 8.231657] iwlagn 0000:02:00.0: PCI INT A disabled [ 8.231942] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 12.926405] ACPI: EC: ---> status = 0x08 [ 12.926408] ACPI: EC: transaction start [ 12.926414] ACPI: EC: <--- command = 0x82 [ 12.926519] ACPI: EC: ---> status = 0x1b [ 12.926522] ACPI: EC: ---> data = 0x90 [ 12.926623] ACPI: EC: transaction end [ 12.926626] ACPI: EC: ---> status = 0x18 [ 12.926633] ACPI: EC: ---> status = 0x18 [ 12.926634] ACPI: EC: transaction start [ 12.926638] ACPI: EC: <--- command = 0x80 [ 12.926743] ACPI: EC: ---> status = 0x18 [ 12.926744] ACPI: EC: <--- data = 0x30 [ 12.926849] ACPI: EC: ---> status = 0x13 [ 12.926851] ACPI: EC: ---> data = 0x03 [ 12.926952] ACPI: EC: transaction end [ 12.926955] ACPI: EC: ---> status = 0x10 [ 12.926978] ACPI: EC: ~~~> interrupt [ 12.926981] ACPI: EC: ---> status = 0x10 [ 12.926986] ACPI: EC: ---> status = 0x10 [ 12.926989] ACPI: EC: ---> status = 0x10 [ 12.926990] ACPI: EC: transaction start [ 12.926994] ACPI: EC: <--- command = 0x83 [ 12.927099] ACPI: EC: ---> status = 0x08 [ 12.927200] ACPI: EC: transaction end [ 12.927203] ACPI: EC: ---> status = 0x08 [ 12.979891] EXT3 FS on sda2, internal journal [ 13.107086] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 13.107121] kjournald starting. Commit interval 5 seconds [ 13.107213] EXT3 FS on sda3, internal journal [ 13.107219] EXT3-fs: mounted filesystem with ordered data mode. [ 13.233573] fuse init (API version 7.10) [ 15.736627] r8169: eth0: link up [ 15.736655] r8169: eth0: link up [ 17.306333] iwlagn 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 17.306413] iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) [ 17.306512] iwlagn 0000:02:00.0: irq 42 for MSI/MSI-X [ 17.306577] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 17.384203] iwlagn: Radio disabled by HW RF Kill switch [ 18.064463] Adding 3068404k swap on /dev/sda4. Priority:-1 extents:1 across:3068404k [ 22.866378] NET: Registered protocol family 10 [ 22.866753] lo: Disabled Privacy Extensions [ 22.867557] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.121189] ACPI: EC: ---> status = 0x08 [ 28.121192] ACPI: EC: transaction start [ 28.121197] ACPI: EC: <--- command = 0x82 [ 28.121309] ACPI: EC: ---> status = 0x1b [ 28.121313] ACPI: EC: ---> data = 0x90 [ 28.121414] ACPI: EC: transaction end [ 28.121418] ACPI: EC: ---> status = 0x18 [ 28.121425] ACPI: EC: ---> status = 0x18 [ 28.121426] ACPI: EC: transaction start [ 28.121431] ACPI: EC: <--- command = 0x80 [ 28.121536] ACPI: EC: ---> status = 0x18 [ 28.121537] ACPI: EC: <--- data = 0x31 [ 28.121642] ACPI: EC: ---> status = 0x13 [ 28.121645] ACPI: EC: ---> data = 0x09 [ 28.121746] ACPI: EC: transaction end [ 28.121749] ACPI: EC: ---> status = 0x10 [ 28.121755] ACPI: EC: ---> status = 0x10 [ 28.121758] ACPI: EC: ---> status = 0x10 [ 28.121759] ACPI: EC: transaction start [ 28.121763] ACPI: EC: <--- command = 0x83 [ 28.121868] ACPI: EC: ---> status = 0x08 [ 28.121969] ACPI: EC: transaction end [ 28.121972] ACPI: EC: ---> status = 0x08 [ 28.121999] ACPI: EC: ---> status = 0x08 [ 28.122000] ACPI: EC: transaction start [ 28.122012] ACPI: EC: <--- command = 0x82 [ 28.122117] ACPI: EC: ---> status = 0x1b [ 28.122120] ACPI: EC: ---> data = 0x90 [ 28.122221] ACPI: EC: transaction end [ 28.122224] ACPI: EC: ---> status = 0x18 [ 28.122230] ACPI: EC: ---> status = 0x18 [ 28.122231] ACPI: EC: transaction start [ 28.122235] ACPI: EC: <--- command = 0x80 [ 28.122342] ACPI: EC: ---> status = 0x18 [ 28.122343] ACPI: EC: <--- data = 0x30 [ 28.122448] ACPI: EC: ---> status = 0x13 [ 28.122451] ACPI: EC: ---> data = 0x03 [ 28.122552] ACPI: EC: transaction end [ 28.122555] ACPI: EC: ---> status = 0x10 [ 28.122562] ACPI: EC: ---> status = 0x10 [ 28.122565] ACPI: EC: ---> status = 0x10 [ 28.122566] ACPI: EC: transaction start [ 28.122571] ACPI: EC: <--- command = 0x83 [ 28.122675] ACPI: EC: ---> status = 0x08 [ 28.122776] ACPI: EC: transaction end [ 28.122779] ACPI: EC: ---> status = 0x08 [ 28.122807] ACPI: EC: ---> status = 0x08 [ 28.122808] ACPI: EC: transaction start [ 28.122813] ACPI: EC: <--- command = 0x82 [ 28.122918] ACPI: EC: ---> status = 0x1b [ 28.122921] ACPI: EC: ---> data = 0x90 [ 28.123022] ACPI: EC: transaction end [ 28.123025] ACPI: EC: ---> status = 0x18 [ 28.123031] ACPI: EC: ---> status = 0x18 [ 28.123032] ACPI: EC: transaction start [ 28.123037] ACPI: EC: <--- command = 0x80 [ 28.123142] ACPI: EC: ---> status = 0x18 [ 28.123143] ACPI: EC: <--- data = 0x31 [ 28.123248] ACPI: EC: ---> status = 0x13 [ 28.123251] ACPI: EC: ---> data = 0x09 [ 28.123353] ACPI: EC: transaction end [ 28.123356] ACPI: EC: ---> status = 0x10 [ 28.123376] ACPI: EC: ~~~> interrupt [ 28.123379] ACPI: EC: ---> status = 0x10 [ 28.123387] ACPI: EC: ---> status = 0x10 [ 28.123390] ACPI: EC: ---> status = 0x10 [ 28.123391] ACPI: EC: transaction start [ 28.123396] ACPI: EC: <--- command = 0x83 [ 28.123500] ACPI: EC: ---> status = 0x08 [ 28.123602] ACPI: EC: transaction end [ 28.123605] ACPI: EC: ---> status = 0x08 [ 28.123634] ACPI: EC: ---> status = 0x08 [ 28.123635] ACPI: EC: transaction start [ 28.123639] ACPI: EC: <--- command = 0x82 [ 28.123744] ACPI: EC: ---> status = 0x1b [ 28.123747] ACPI: EC: ---> data = 0x90 [ 28.123848] ACPI: EC: transaction end [ 28.123851] ACPI: EC: ---> status = 0x18 [ 28.123858] ACPI: EC: ---> status = 0x18 [ 28.123859] ACPI: EC: transaction start [ 28.123864] ACPI: EC: <--- command = 0x80 [ 28.123969] ACPI: EC: ---> status = 0x18 [ 28.123970] ACPI: EC: <--- data = 0x30 [ 28.124075] ACPI: EC: ---> status = 0x13 [ 28.124078] ACPI: EC: ---> data = 0x03 [ 28.124179] ACPI: EC: transaction end [ 28.124182] ACPI: EC: ---> status = 0x10 [ 28.124204] ACPI: EC: ~~~> interrupt [ 28.124206] ACPI: EC: ---> status = 0x10 [ 28.124211] ACPI: EC: ---> status = 0x10 [ 28.124214] ACPI: EC: ---> status = 0x10 [ 28.124215] ACPI: EC: transaction start [ 28.124221] ACPI: EC: <--- command = 0x83 [ 28.124327] ACPI: EC: ---> status = 0x08 [ 28.124428] ACPI: EC: transaction end [ 28.124431] ACPI: EC: ---> status = 0x08 [ 28.124458] ACPI: EC: ---> status = 0x08 [ 28.124460] ACPI: EC: transaction start [ 28.124464] ACPI: EC: <--- command = 0x82 [ 28.124569] ACPI: EC: ---> status = 0x1b [ 28.124572] ACPI: EC: ---> data = 0x90 [ 28.124673] ACPI: EC: transaction end [ 28.124676] ACPI: EC: ---> status = 0x18 [ 28.124683] ACPI: EC: ---> status = 0x18 [ 28.124684] ACPI: EC: transaction start [ 28.124688] ACPI: EC: <--- command = 0x80 [ 28.124793] ACPI: EC: ---> status = 0x18 [ 28.124794] ACPI: EC: <--- data = 0x31 [ 28.124899] ACPI: EC: ---> status = 0x12 [ 28.125002] ACPI: EC: ---> status = 0x11 [ 28.125005] ACPI: EC: ---> data = 0x09 [ 28.125106] ACPI: EC: transaction end [ 28.125109] ACPI: EC: ---> status = 0x10 [ 28.125116] ACPI: EC: ---> status = 0x10 [ 28.125118] ACPI: EC: ---> status = 0x10 [ 28.125119] ACPI: EC: transaction start [ 28.125124] ACPI: EC: <--- command = 0x83 [ 28.125229] ACPI: EC: ---> status = 0x08 [ 28.125331] ACPI: EC: transaction end [ 28.125334] ACPI: EC: ---> status = 0x08 [ 28.125393] ACPI: EC: ---> status = 0x08 [ 28.125394] ACPI: EC: transaction start [ 28.125398] ACPI: EC: <--- command = 0x82 [ 28.125503] ACPI: EC: ---> status = 0x1b [ 28.125506] ACPI: EC: ---> data = 0x90 [ 28.125609] ACPI: EC: transaction end [ 28.125612] ACPI: EC: ---> status = 0x18 [ 28.125618] ACPI: EC: ---> status = 0x18 [ 28.125619] ACPI: EC: transaction start [ 28.125624] ACPI: EC: <--- command = 0x80 [ 28.125728] ACPI: EC: ---> status = 0x18 [ 28.125729] ACPI: EC: <--- data = 0x49 [ 28.125834] ACPI: EC: ---> status = 0x13 [ 28.125837] ACPI: EC: ---> data = 0x09 [ 28.125938] ACPI: EC: transaction end [ 28.125940] ACPI: EC: ---> status = 0x10 [ 28.125962] ACPI: EC: ~~~> interrupt [ 28.125965] ACPI: EC: ---> status = 0x10 [ 28.125969] ACPI: EC: ---> status = 0x10 [ 28.125978] ACPI: EC: ---> status = 0x10 [ 28.125979] ACPI: EC: transaction start [ 28.125983] ACPI: EC: <--- command = 0x83 [ 28.126088] ACPI: EC: ---> status = 0x08 [ 28.126189] ACPI: EC: transaction end [ 28.126192] ACPI: EC: ---> status = 0x08 [ 28.126213] ACPI: EC: ---> status = 0x08 [ 28.126214] ACPI: EC: transaction start [ 28.126218] ACPI: EC: <--- command = 0x82 [ 28.126325] ACPI: EC: ---> status = 0x1b [ 28.126328] ACPI: EC: ---> data = 0x90 [ 28.126430] ACPI: EC: transaction end [ 28.126433] ACPI: EC: ---> status = 0x18 [ 28.126440] ACPI: EC: ---> status = 0x18 [ 28.126440] ACPI: EC: transaction start [ 28.126445] ACPI: EC: <--- command = 0x80 [ 28.126550] ACPI: EC: ---> status = 0x18 [ 28.126551] ACPI: EC: <--- data = 0x48 [ 28.126656] ACPI: EC: ---> status = 0x13 [ 28.126659] ACPI: EC: ---> data = 0x70 [ 28.126760] ACPI: EC: transaction end [ 28.126763] ACPI: EC: ---> status = 0x10 [ 28.126769] ACPI: EC: ---> status = 0x10 [ 28.126772] ACPI: EC: ---> status = 0x10 [ 28.126773] ACPI: EC: transaction start [ 28.126785] ACPI: EC: ~~~> interrupt [ 28.126789] ACPI: EC: ---> status = 0x10 [ 28.126815] ACPI: EC: <--- command = 0x83 [ 28.126920] ACPI: EC: ---> status = 0x08 [ 28.127021] ACPI: EC: transaction end [ 28.127024] ACPI: EC: ---> status = 0x08 [ 28.127086] ACPI: EC: ---> status = 0x08 [ 28.127087] ACPI: EC: transaction start [ 28.127092] ACPI: EC: <--- command = 0x82 [ 28.127197] ACPI: EC: ---> status = 0x1b [ 28.127200] ACPI: EC: ---> data = 0x90 [ 28.127302] ACPI: EC: transaction end [ 28.127305] ACPI: EC: ---> status = 0x18 [ 28.127312] ACPI: EC: ---> status = 0x18 [ 28.127313] ACPI: EC: transaction start [ 28.127317] ACPI: EC: <--- command = 0x80 [ 28.127422] ACPI: EC: ---> status = 0x18 [ 28.127423] ACPI: EC: <--- data = 0x4b [ 28.127528] ACPI: EC: ---> status = 0x13 [ 28.127531] ACPI: EC: ---> data = 0x40 [ 28.127632] ACPI: EC: transaction end [ 28.127635] ACPI: EC: ---> status = 0x10 [ 28.127656] ACPI: EC: ~~~> interrupt [ 28.127659] ACPI: EC: ---> status = 0x10 [ 28.127664] ACPI: EC: ---> status = 0x10 [ 28.127667] ACPI: EC: ---> status = 0x10 [ 28.127668] ACPI: EC: transaction start [ 28.127673] ACPI: EC: <--- command = 0x83 [ 28.127778] ACPI: EC: ---> status = 0x08 [ 28.127879] ACPI: EC: transaction end [ 28.127882] ACPI: EC: ---> status = 0x08 [ 28.127902] ACPI: EC: ---> status = 0x08 [ 28.127903] ACPI: EC: transaction start [ 28.127908] ACPI: EC: <--- command = 0x82 [ 28.128013] ACPI: EC: ---> status = 0x1a [ 28.128115] ACPI: EC: ---> status = 0x19 [ 28.128118] ACPI: EC: ---> data = 0x90 [ 28.128219] ACPI: EC: transaction end [ 28.128222] ACPI: EC: ---> status = 0x18 [ 28.128229] ACPI: EC: ---> status = 0x18 [ 28.128230] ACPI: EC: transaction start [ 28.128234] ACPI: EC: <--- command = 0x80 [ 28.128340] ACPI: EC: ---> status = 0x18 [ 28.128341] ACPI: EC: <--- data = 0x4a [ 28.128446] ACPI: EC: ---> status = 0x13 [ 28.128450] ACPI: EC: ---> data = 0x9a [ 28.128551] ACPI: EC: transaction end [ 28.128554] ACPI: EC: ---> status = 0x10 [ 28.128576] ACPI: EC: ~~~> interrupt [ 28.128579] ACPI: EC: ---> status = 0x10 [ 28.128584] ACPI: EC: ---> status = 0x10 [ 28.128587] ACPI: EC: ---> status = 0x10 [ 28.128588] ACPI: EC: transaction start [ 28.128593] ACPI: EC: <--- command = 0x83 [ 28.128697] ACPI: EC: ---> status = 0x08 [ 28.128798] ACPI: EC: transaction end [ 28.128801] ACPI: EC: ---> status = 0x08 [ 33.823072] eth0: no IPv6 routers present [ 59.143299] ACPI: EC: ---> status = 0x08 [ 59.143304] ACPI: EC: transaction start [ 59.143315] ACPI: EC: <--- command = 0x82 [ 59.143424] ACPI: EC: ---> status = 0x1b [ 59.143429] ACPI: EC: ---> data = 0x90 [ 59.143532] ACPI: EC: transaction end [ 59.143537] ACPI: EC: ---> status = 0x18 [ 59.143547] ACPI: EC: ---> status = 0x18 [ 59.143550] ACPI: EC: transaction start [ 59.143557] ACPI: EC: <--- command = 0x80 [ 59.143664] ACPI: EC: ---> status = 0x18 [ 59.143667] ACPI: EC: <--- data = 0x31 [ 59.143775] ACPI: EC: ---> status = 0x13 [ 59.143780] ACPI: EC: ---> data = 0x09 [ 59.143883] ACPI: EC: transaction end [ 59.143888] ACPI: EC: ---> status = 0x10 [ 59.143897] ACPI: EC: ---> status = 0x10 [ 59.143902] ACPI: EC: ---> status = 0x10 [ 59.143905] ACPI: EC: transaction start [ 59.143912] ACPI: EC: <--- command = 0x83 [ 59.144019] ACPI: EC: ---> status = 0x08 [ 59.144122] ACPI: EC: transaction end [ 59.144128] ACPI: EC: ---> status = 0x08 [ 59.144196] ACPI: EC: ---> status = 0x08 [ 59.144199] ACPI: EC: transaction start [ 59.144207] ACPI: EC: <--- command = 0x82 [ 59.144316] ACPI: EC: ---> status = 0x1b [ 59.144321] ACPI: EC: ---> data = 0x90 [ 59.144424] ACPI: EC: transaction end [ 59.144429] ACPI: EC: ---> status = 0x18 [ 59.144439] ACPI: EC: ---> status = 0x18 [ 59.144442] ACPI: EC: transaction start [ 59.144460] ACPI: EC: ~~~> interrupt [ 59.144467] ACPI: EC: ---> status = 0x18 [ 59.144481] ACPI: EC: <--- command = 0x80 [ 59.144588] ACPI: EC: ---> status = 0x18 [ 59.144591] ACPI: EC: <--- data = 0x30 [ 59.144698] ACPI: EC: ---> status = 0x13 [ 59.144703] ACPI: EC: ---> data = 0x03 [ 59.144806] ACPI: EC: transaction end [ 59.144811] ACPI: EC: ---> status = 0x10 [ 59.144821] ACPI: EC: ---> status = 0x10 [ 59.144826] ACPI: EC: ---> status = 0x10 [ 59.144829] ACPI: EC: transaction start [ 59.144838] ACPI: EC: <--- command = 0x83 [ 59.144946] ACPI: EC: ---> status = 0x08 [ 59.145049] ACPI: EC: transaction end [ 59.145056] ACPI: EC: ---> status = 0x08 [ 59.145123] ACPI: EC: ---> status = 0x08 [ 59.145127] ACPI: EC: transaction start [ 59.145136] ACPI: EC: <--- command = 0x82 [ 59.145245] ACPI: EC: ---> status = 0x1a [ 59.145365] ACPI: EC: ---> status = 0x19 [ 59.145371] ACPI: EC: ---> data = 0x90 [ 59.145475] ACPI: EC: transaction end [ 59.145480] ACPI: EC: ---> status = 0x18 [ 59.145490] ACPI: EC: ---> status = 0x18 [ 59.145493] ACPI: EC: transaction start [ 59.145500] ACPI: EC: <--- command = 0x80 [ 59.145608] ACPI: EC: ---> status = 0x18 [ 59.145611] ACPI: EC: <--- data = 0x31 [ 59.145718] ACPI: EC: ---> status = 0x13 [ 59.145723] ACPI: EC: ---> data = 0x09 [ 59.145826] ACPI: EC: transaction end [ 59.145831] ACPI: EC: ---> status = 0x10 [ 59.145841] ACPI: EC: ---> status = 0x10 [ 59.145847] ACPI: EC: ---> status = 0x10 [ 59.145849] ACPI: EC: transaction start [ 59.145861] ACPI: EC: ~~~> interrupt [ 59.145868] ACPI: EC: ---> status = 0x10 [ 59.145881] ACPI: EC: <--- command = 0x83 [ 59.145988] ACPI: EC: ---> status = 0x08 [ 59.146123] ACPI: EC: transaction end [ 59.146129] ACPI: EC: ---> status = 0x08 [ 59.146201] ACPI: EC: ---> status = 0x08 [ 59.146204] ACPI: EC: transaction start [ 59.146211] ACPI: EC: <--- command = 0x82 [ 59.146320] ACPI: EC: ---> status = 0x1b [ 59.146326] ACPI: EC: ---> data = 0x90 [ 59.146428] ACPI: EC: transaction end [ 59.146433] ACPI: EC: ---> status = 0x18 [ 59.146444] ACPI: EC: ---> status = 0x18 [ 59.146447] ACPI: EC: transaction start [ 59.146454] ACPI: EC: <--- command = 0x80 [ 59.146562] ACPI: EC: ---> status = 0x18 [ 59.146565] ACPI: EC: <--- data = 0x30 [ 59.146672] ACPI: EC: ---> status = 0x13 [ 59.146677] ACPI: EC: ---> data = 0x03 [ 59.146780] ACPI: EC: transaction end [ 59.146785] ACPI: EC: ---> status = 0x10 [ 59.146813] ACPI: EC: ~~~> interrupt [ 59.146818] ACPI: EC: ---> status = 0x10 [ 59.146829] ACPI: EC: ---> status = 0x10 [ 59.146834] ACPI: EC: ---> status = 0x10 [ 59.146836] ACPI: EC: transaction start [ 59.146844] ACPI: EC: <--- command = 0x83 [ 59.146951] ACPI: EC: ---> status = 0x08 [ 59.147054] ACPI: EC: transaction end [ 59.147059] ACPI: EC: ---> status = 0x08 [ 59.147124] ACPI: EC: ---> status = 0x08 [ 59.147127] ACPI: EC: transaction start [ 59.147134] ACPI: EC: <--- command = 0x82 [ 59.147242] ACPI: EC: ---> status = 0x1b [ 59.147247] ACPI: EC: ---> data = 0x90 [ 59.147364] ACPI: EC: transaction end [ 59.147369] ACPI: EC: ---> status = 0x18 [ 59.147379] ACPI: EC: ---> status = 0x18 [ 59.147382] ACPI: EC: transaction start [ 59.147389] ACPI: EC: <--- command = 0x80 [ 59.147496] ACPI: EC: ---> status = 0x18 [ 59.147499] ACPI: EC: <--- data = 0x31 [ 59.147607] ACPI: EC: ---> status = 0x13 [ 59.147612] ACPI: EC: ---> data = 0x09 [ 59.147715] ACPI: EC: transaction end [ 59.147720] ACPI: EC: ---> status = 0x10 [ 59.147729] ACPI: EC: ---> status = 0x10 [ 59.147736] ACPI: EC: ---> status = 0x10 [ 59.147738] ACPI: EC: transaction start [ 59.147750] ACPI: EC: ~~~> interrupt [ 59.147757] ACPI: EC: ---> status = 0x10 [ 59.147770] ACPI: EC: <--- command = 0x83 [ 59.147877] ACPI: EC: ---> status = 0x08 [ 59.147980] ACPI: EC: transaction end [ 59.147985] ACPI: EC: ---> status = 0x08 [ 59.148126] ACPI: EC: ---> status = 0x08 [ 59.148129] ACPI: EC: transaction start [ 59.148137] ACPI: EC: <--- command = 0x82 [ 59.148244] ACPI: EC: ---> status = 0x1b [ 59.148249] ACPI: EC: ---> data = 0x90 [ 59.148366] ACPI: EC: transaction end [ 59.148371] ACPI: EC: ---> status = 0x18 [ 59.148381] ACPI: EC: ---> status = 0x18 [ 59.148384] ACPI: EC: transaction start [ 59.148391] ACPI: EC: <--- command = 0x80 [ 59.148498] ACPI: EC: ---> status = 0x18 [ 59.148501] ACPI: EC: <--- data = 0x49 [ 59.148609] ACPI: EC: ---> status = 0x13 [ 59.148614] ACPI: EC: ---> data = 0x09 [ 59.148717] ACPI: EC: transaction end [ 59.148723] ACPI: EC: ---> status = 0x10 [ 59.148753] ACPI: EC: ~~~> interrupt [ 59.148759] ACPI: EC: ---> status = 0x10 [ 59.148768] ACPI: EC: ---> status = 0x10 [ 59.148775] ACPI: EC: ---> status = 0x10 [ 59.148779] ACPI: EC: transaction start [ 59.148787] ACPI: EC: <--- command = 0x83 [ 59.148896] ACPI: EC: ---> status = 0x08 [ 59.149000] ACPI: EC: transaction end [ 59.149005] ACPI: EC: ---> status = 0x08 [ 59.149052] ACPI: EC: ---> status = 0x08 [ 59.149056] ACPI: EC: transaction start [ 59.149065] ACPI: EC: <--- command = 0x82 [ 59.149173] ACPI: EC: ---> status = 0x1a [ 59.149281] ACPI: EC: ---> status = 0x19 [ 59.149287] ACPI: EC: ---> data = 0x90 [ 59.149389] ACPI: EC: transaction end [ 59.149394] ACPI: EC: ---> status = 0x18 [ 59.149404] ACPI: EC: ---> status = 0x18 [ 59.149407] ACPI: EC: transaction start [ 59.149414] ACPI: EC: <--- command = 0x80 [ 59.149522] ACPI: EC: ---> status = 0x18 [ 59.149525] ACPI: EC: <--- data = 0x48 [ 59.149632] ACPI: EC: ---> status = 0x13 [ 59.149637] ACPI: EC: ---> data = 0x70 [ 59.149740] ACPI: EC: transaction end [ 59.149745] ACPI: EC: ---> status = 0x10 [ 59.149755] ACPI: EC: ---> status = 0x10 [ 59.149760] ACPI: EC: ---> status = 0x10 [ 59.149762] ACPI: EC: transaction start [ 59.149770] ACPI: EC: <--- command = 0x83 [ 59.149877] ACPI: EC: ---> status = 0x08 [ 59.149980] ACPI: EC: transaction end [ 59.149985] ACPI: EC: ---> status = 0x08 [ 59.150138] ACPI: EC: ---> status = 0x08 [ 59.150141] ACPI: EC: transaction start [ 59.150149] ACPI: EC: <--- command = 0x82 [ 59.150265] ACPI: EC: ---> status = 0x1b [ 59.150270] ACPI: EC: ---> data = 0x90 [ 59.150373] ACPI: EC: transaction end [ 59.150378] ACPI: EC: ---> status = 0x18 [ 59.150388] ACPI: EC: ---> status = 0x18 [ 59.150391] ACPI: EC: transaction start [ 59.150398] ACPI: EC: <--- command = 0x80 [ 59.150506] ACPI: EC: ---> status = 0x18 [ 59.150508] ACPI: EC: <--- data = 0x4b [ 59.150616] ACPI: EC: ---> status = 0x13 [ 59.150621] ACPI: EC: ---> data = 0x40 [ 59.150724] ACPI: EC: transaction end [ 59.150729] ACPI: EC: ---> status = 0x10 [ 59.150739] ACPI: EC: ---> status = 0x10 [ 59.150744] ACPI: EC: ---> status = 0x10 [ 59.150746] ACPI: EC: transaction start [ 59.150754] ACPI: EC: <--- command = 0x83 [ 59.150861] ACPI: EC: ---> status = 0x08 [ 59.150964] ACPI: EC: transaction end [ 59.150969] ACPI: EC: ---> status = 0x08 [ 59.151014] ACPI: EC: ---> status = 0x08 [ 59.151017] ACPI: EC: transaction start [ 59.151024] ACPI: EC: <--- command = 0x82 [ 59.151132] ACPI: EC: ---> status = 0x1a [ 59.151237] ACPI: EC: ---> status = 0x19 [ 59.151242] ACPI: EC: ---> data = 0x90 [ 59.151347] ACPI: EC: transaction end [ 59.151352] ACPI: EC: ---> status = 0x18 [ 59.151363] ACPI: EC: ---> status = 0x18 [ 59.151365] ACPI: EC: transaction start [ 59.151373] ACPI: EC: <--- command = 0x80 [ 59.151480] ACPI: EC: ---> status = 0x18 [ 59.151483] ACPI: EC: <--- data = 0x4a [ 59.151590] ACPI: EC: ---> status = 0x13 [ 59.151595] ACPI: EC: ---> data = 0x99 [ 59.151698] ACPI: EC: transaction end [ 59.151703] ACPI: EC: ---> status = 0x10 [ 59.151713] ACPI: EC: ---> status = 0x10 [ 59.151719] ACPI: EC: ---> status = 0x10 [ 59.151721] ACPI: EC: transaction start [ 59.151733] ACPI: EC: ~~~> interrupt [ 59.151739] ACPI: EC: ---> status = 0x10 [ 59.151752] ACPI: EC: <--- command = 0x83 [ 59.151859] ACPI: EC: ---> status = 0x08 [ 59.151962] ACPI: EC: transaction end [ 59.151967] ACPI: EC: ---> status = 0x08