/var/log/portage/cross-mips-topan-linux-uclibc-uclibc.log

cross-mips-topan-linux-uclibc-uclibc.log (text/plain), 18.34 KB, created by Arsen Shnurkov on 2008-11-24 05:10:25 UTC

>>> Verifying ebuild Manifests...

>>> Emerging (1 of 1) cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1 to /
 * uClibc-0.9.27.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                  [ ok ]
 * uClibc-0.9.27-patches-1.6.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...      [ ok ]
 * uClibc-0.9.27-cvs-update-20050114.patch.bz2 RMD160 SHA1 SHA256 size ;-) ...      [ ok ]
 * checking ebuild checksums ;-) ...                                      [ ok ]
 * checking auxfile checksums ;-) ...                                     [ ok ]
 * checking miscfile checksums ;-) ...                                    [ ok ]
 * checking uClibc-0.9.27.tar.bz2 ;-) ...                                 [ ok ]
 * checking uClibc-0.9.27-cvs-update-20050114.patch.bz2 ;-) ...           [ ok ]
 * checking uClibc-0.9.27-patches-1.6.tar.bz2 ;-) ...                     [ ok ]
 * This profile has not been tested thoroughly and is not considered to be
 * a supported server profile at this time.  For a supported server
 * profile, please check the Hardened project (http://hardened.gentoo.org).

 * This profile is merely a convenience for people who require a more
 * minimal profile, yet are unable to use hardened due to restrictions in
 * the software being used on the server. This profile should also be used
 * if you require GCC 4.1 or Glibc 2.4 support. If you don't know if this
 * applies to you, then it doesn't and you should probably be using
 * Hardened, instead.

>>> Unpacking source...
>>> Unpacking uClibc-0.9.27.tar.bz2 to /var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work
>>> Unpacking uClibc-0.9.27-cvs-update-20050114.patch.bz2 to /var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work
>>> Unpacking uClibc-0.9.27-patches-1.6.tar.bz2 to /var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work
 * You really should consider setting UCLIBC_CPU
 * Otherwise, the build will be generic (read: slow).
 * Available CPU options:
MIPS_ISA_1 MIPS_ISA_2 MIPS_ISA_3 MIPS_ISA_4 MIPS_ISA_MIPS32 MIPS_ISA_MIPS64

 * Runtime Prefix: /
 * Devel Prefix:   /usr
 * Kernel Prefix:  /usr/mips-topan-linux-uclibc/usr
 * CBUILD:         i686-pc-linux-gnu
 * CHOST:          i686-pc-linux-gnu
 * CTARGET:        mips-topan-linux-uclibc
 * CPU:            MIPS_ISA_1
 * ENDIAN:         big

 * Applying uClibc-0.9.27-cvs-update-20050114.patch ...
  [ ok ]
>>> Unpacking uClibc-0.9.27-patches-1.6.tar.bz2 to /var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27
 * Applying various patches (bugfixes/updates) ...
 *   05_all_uClibc-0.9.27-svn-textrel-arm-fixes.patch ...
  [ ok ]
 *   07_all_uClibc-svn-stat-updates.patch ...
  [ ok ]
 *   08_all_uClibc-svn-getent.patch ...
  [ ok ]
 *   10_all_uClibc-svn-arm-fpu-endian.patch ...
  [ ok ]
 *   11_all_uClibc-svn-assert.patch ...
  [ ok ]
 *   13_all_uClibc-0.9.26-cvs-install-links.patch ...
  [ ok ]
 *   14_all_uClibc-svn-simpler-kernel-headers.patch ...
  [ ok ]
 *   20_all_uClibc-0.9.26-cvs-crt-correction.patch ...
  [ ok ]
 *   25_all_no-pthread-atfork-in-unistd.patch ...
  [ ok ]
 *   30_all_uClibc-arm-string-size-t-values.patch ...
  [ ok ]
 *   30_all_uClibc-i386-string-size-t-values.patch ...
  [ ok ]
 *   40_all_uClibc-0.9.27-_dl_fini-correct-order.patch ...
  [ ok ]
 * Done with patching
 * Applying various patches (bugfixes/updates) ...
 *   90_all_uClibc-0.9.26-fabsf.patch ...
  [ ok ]
 *   91_all_uClibc-0.9.26-powf.patch ...
  [ ok ]
 *   92_all_uClibc-0.9.26-scalbnf.patch ...
  [ ok ]
 *   93_all_uClibc-0.9.26-sincostanf.patch ...
  [ ok ]
 *   94_all_uClibc-0.9.26-atan2f.patch ...
  [ ok ]
 *   95_all_uClibc-0.9.27-round.patch ...
  [ ok ]
 * Done with patching
>>> Source unpacked.
>>> Compiling source in /var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27 ...
/usr/bin/mips-topan-linux-uclibc-ar
rm -f -r include/bits
install -d include/bits
#
# using defaults found in .config
#
*
* uClibc Configuration
*
Target Architecture
  1. alpha (TARGET_alpha)
  2. arm (TARGET_arm)
  3. bfin (TARGET_bfin)
  4. cris (TARGET_cris)
  5. e1 (TARGET_e1)
  6. frv (TARGET_frv)
  7. h8300 (TARGET_h8300)
  8. i386 (TARGET_i386)
  9. i960 (TARGET_i960)
  10. m68k (TARGET_m68k)
  11. microblaze (TARGET_microblaze)
> 12. mips (TARGET_mips)
  13. nios (TARGET_nios)
  14. nios2 (TARGET_nios2)
  15. powerpc (TARGET_powerpc)
  16. SuperH (TARGET_sh)
  17. sparc (TARGET_sparc)
  18. v850 (TARGET_v850)
choice[1-18?]: 12
*
* Target Architecture Features and Options
*
Target Processor Architecture
> 1. Generic (MIPS I) (CONFIG_MIPS_ISA_1)
  2. MIPS II (CONFIG_MIPS_ISA_2)
  3. MIPS III (CONFIG_MIPS_ISA_3)
  4. MIPS IV (CONFIG_MIPS_ISA_4)
  5. MIPS32 (CONFIG_MIPS_ISA_MIPS32)
  6. MIPS64 (CONFIG_MIPS_ISA_MIPS64)
choice[1-6?]: 1
Target Processor Endianness
  1. Little Endian (ARCH_LITTLE_ENDIAN)
> 2. Big Endian (ARCH_BIG_ENDIAN)
choice[1-2?]: 2
Target CPU has a memory management unit (MMU) (ARCH_HAS_MMU) [Y/n/?] y
Enable floating point number support (UCLIBC_HAS_FLOATS) [Y/n/?] y
  Target CPU has a floating point unit (FPU) (HAS_FPU) [Y/n/?] y
  Enable full C99 math library support (DO_C99_MATH) [Y/n/?] y
Compiler Warnings (WARNINGS) [-Wall] -Wall
Linux kernel header location (KERNEL_SOURCE) [/usr/mips-topan-linux-uclibc/usr] /usr/mips-topan-linux-uclibc/usr
*
* General Library Settings
*
Generate Position Independent Code (PIC) (DOPIC) [Y/n/?] y
Enable support for shared libraries (HAVE_SHARED) [Y/n/?] y
Compile native shared library loader (BUILD_UCLIBC_LDSO) [Y/n/?] y
  Only load shared libraries which can share their text segment (FORCE_SHAREABLE_TEXT_SEGMENTS) [N/y/?] n
  Native shared library loader 'ldd' support (LDSO_LDD_SUPPORT) [Y/n/?] y
  Enable shared library loader cache (LDSO_CACHE_SUPPORT) [Y/n/?] y
  Enable shared library loader preload file support (LDSO_PRELOAD_FILE_SUPPORT) [N/y/?] n
Shared library loader naming prefix (LDSO_BASE_FILENAME) [ld.so] ld.so
Support global constructors and destructors (UCLIBC_CTOR_DTOR) [Y/n/?] y
POSIX Threading Support (UCLIBC_HAS_THREADS) [Y/n/?] y
  Build pthreads debugging support (PTHREADS_DEBUG_SUPPORT) [Y/n/?] y
Large File Support (UCLIBC_HAS_LFS) [Y/n/?] y
Malloc Implementation
  1. malloc (MALLOC)
  2. malloc-simple (MALLOC_SIMPLE)
> 3. malloc-standard (MALLOC_STANDARD)
choice[1-3?]: 3
Malloc returns live pointer for malloc(0) (MALLOC_GLIBC_COMPAT) [N/y/?] n
Dynamic atexit() Support (UCLIBC_DYNAMIC_ATEXIT) [Y/n/?] y
Shadow Password Support (HAS_SHADOW) [Y/n/?] y
Support only Unix 98 PTYs (UNIX98PTY_ONLY) [Y/n/?] y
Assume that /dev/pts is a devpts or devfs file system (ASSUME_DEVPTS) [Y/n/?] y
Support 'struct tm' timezone extension fields (UCLIBC_HAS_TM_EXTENSIONS) [Y/n/?] y
Enable caching of the last valid timezone 'TZ' string (UCLIBC_HAS_TZ_CACHING) [Y/n/?] y
Enable '/etc/TZ' file support to set a default timezone (uClibc-specific) (UCLIBC_HAS_TZ_FILE) [Y/n/?] y
  Repeatedly read the '/etc/TZ' file (UCLIBC_HAS_TZ_FILE_READ_MANY) [N/y/?] n
  Path to the 'TZ' file for setting the global timezone (UCLIBC_TZ_FILE_PATH) [/etc/TZ] /etc/TZ
*
* Networking Support
*
IP version 6 Support (UCLIBC_HAS_IPV6) [N/y/?] n
Remote Procedure Call (RPC) support (UCLIBC_HAS_RPC) [Y/n/?] y
  Full RPC support (UCLIBC_HAS_FULL_RPC) [Y/n/?] y
*
* String and Stdio Support
*
Use glibc generic string functions (UCLIBC_HAS_STRING_GENERIC_OPT) [Y/n/?] y
Use arch-specific string functions (UCLIBC_HAS_STRING_ARCH_OPT) [Y/n/?] y
Use Table Versions Of 'ctype.h' Functions. (UCLIBC_HAS_CTYPE_TABLES) [Y/n/?] y
  Support Signed Characters In 'ctype.h' Functions. (UCLIBC_HAS_CTYPE_SIGNED) [Y/n/?] y
  ctype argument checking
    1. Do not check -- unsafe (UCLIBC_HAS_CTYPE_UNSAFE)
  > 2. Detect and handle appropriately (UCLIBC_HAS_CTYPE_CHECKED)
    3. Issue a diagnostic and abort() (UCLIBC_HAS_CTYPE_ENFORCED)
  choice[1-3?]: 2
Wide Character Support (UCLIBC_HAS_WCHAR) [Y/n/?] y
Locale Support (UCLIBC_HAS_LOCALE) [N/y/?] n
Support hexadecimal float notation (UCLIBC_HAS_HEXADECIMAL_FLOATS) [Y/n/?] y
Support glibc's register_printf_function() (glibc-compat) (UCLIBC_HAS_GLIBC_CUSTOM_PRINTF) [Y/n/?] y
Maximum number of positional args.  Either 0 or >= 9. (UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS) [9] 9
Support glibc's 'a' flag for scanf string conversions (UCLIBC_HAS_SCANF_GLIBC_A_FLAG) [N/y/?] n
Stdio buffer size
  1. 256 (minimum ANSI/ISO C99 value) (UCLIBC_HAS_STDIO_BUFSIZ_256)
  2. 512 (UCLIBC_HAS_STDIO_BUFSIZ_512)
  3. 1024 (UCLIBC_HAS_STDIO_BUFSIZ_1024)
  4. 2048 (UCLIBC_HAS_STDIO_BUFSIZ_2048)
> 5. 4096 (UCLIBC_HAS_STDIO_BUFSIZ_4096)
  6. 8192 (UCLIBC_HAS_STDIO_BUFSIZ_8192)
choice[1-6?]: 5
Stdio builtin buffer size (uClibc-specific)
> 1. None (UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE)
  2. 4 (UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4)
  3. 8 (UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8)
choice[1-3?]: 1
Provide a macro version of getc() (UCLIBC_HAS_STDIO_GETC_MACRO) [Y/n/?] y
Provide a macro version of putc() (UCLIBC_HAS_STDIO_PUTC_MACRO) [Y/n/?] y
Support auto-r/w transition (UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION) [Y/n/?] y
Support an fopen() 'F' flag for large file mode (uClibc-specific) (UCLIBC_HAS_FOPEN_LARGEFILE_MODE) [N/y/?] n
Support an fopen() 'x' flag for exclusive mode (glibc-compat) (UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE) [Y/n/?] y
Support fmemopen(), open_memstream(), and fopencookie() (glibc-compat) (UCLIBC_HAS_GLIBC_CUSTOM_STREAMS) [Y/n/?] y
Support the '%m' specifier in printf format strings (glibc-compat) (UCLIBC_HAS_PRINTF_M_SPEC) [Y/n/?] y
Include the errno message text in the library (UCLIBC_HAS_ERRNO_MESSAGES) [Y/n/?] y
  Support sys_errlist[] (obsolete-compat) (UCLIBC_HAS_SYS_ERRLIST) [N/y/?] n
Include the signum message text in the library (UCLIBC_HAS_SIGNUM_MESSAGES) [Y/n/?] y
  Support sys_siglist[] (bsd-compat) (UCLIBC_HAS_SYS_SIGLIST) [N/y/?] n
Support gnu getopt (UCLIBC_HAS_GNU_GETOPT) [Y/n/?] y
*
* Big and Tall
*
Regular Expression Support (UCLIBC_HAS_REGEX) [Y/n/?] y
Support the wordexp() interface (UCLIBC_HAS_WORDEXP) [N/y/?] n
Support the ftw() and nftw() interfaces (UCLIBC_HAS_FTW) [Y/n/?] y
Support the glob() interface (UCLIBC_HAS_GLOB) [Y/n/?] y
*
* Library Installation Options
*
Shared library loader path (SHARED_LIB_LOADER_PREFIX) [/lib] /lib
uClibc runtime library directory (RUNTIME_PREFIX) [/] /
uClibc development environment directory (DEVEL_PREFIX) [/usr] /usr
*
* uClibc security related options
*
Enable security options (UCLIBC_SECURITY) [Y/n] y
  Build utilities as ET_DYN/PIE executables (UCLIBC_BUILD_PIE) [N/y/?] n
  Support for propolice stack protection (UCLIBC_HAS_SSP) [Y/n/?] y
    Simple propolice canary w/o accessing /dev/*random (SSP_QUICK_CANARY) [Y/n/?] y
    Propolice protection blocking signal
      1. abort (PROPOLICE_BLOCK_ABRT)
      2. segfault (PROPOLICE_BLOCK_SEGV)
    > 3. kill (PROPOLICE_BLOCK_KILL)
    choice[1-3?]: 3
    Build uClibc with propolice protection (UCLIBC_BUILD_SSP) [N/y/?] n
  Build uClibc with RELRO (UCLIBC_BUILD_RELRO) [N/y/?] n
  Build uClibc with NOW (UCLIBC_BUILD_NOW) [N/y/?] n
  Build uClibc with noexecstack marking (UCLIBC_BUILD_NOEXECSTACK) [N/y/?] n
*
* uClibc development/debugging options
*
Build uClibc with debugging symbols (DODEBUG) [N/y/?] n
Build uClibc with run-time assertion testing (DOASSERTS) [N/y/?] n
Build the shared library loader with debugging support (SUPPORT_LD_DEBUG) [N/y/?] n
Build the shared library loader with early debugging support (SUPPORT_LD_DEBUG_EARLY) [N/y/?] n
Manuel's hidden warnings (UCLIBC_MJN3_ONLY) [N/y/?] n
+ ./extra/scripts/fix_includes.sh -k /usr/mips-topan-linux-uclibc/usr -t mips
+ TOPDIR=.
+ CC=mips-topan-linux-uclibc-gcc
+ /bin/sh extra/scripts/gen_bits_syscall_h.sh
+ cmp include/bits/sysnum.h include/bits/sysnum.h.new
+ mv -f include/bits/sysnum.h.new include/bits/sysnum.h
make -C libc/sysdeps/linux/common headers
make[1]: Entering directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/common'
ln -fs ../libc/sysdeps/linux/common/fpu_control.h ../../../..//include/
make[1]: Leaving directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/common'
make -C libc/sysdeps/linux/mips headers
make[1]: Entering directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/mips'
ln -fs ../libc/sysdeps/linux/mips/sgidefs.h ../../../..//include/
ln -fs ../libc/sysdeps/linux/mips/fpu_control.h ../../../..//include/
make[1]: Leaving directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/mips'
+ ./extra/scripts/fix_includes.sh -k /usr/mips-topan-linux-uclibc/usr -t mips
+ TOPDIR=.
+ CC=mips-topan-linux-uclibc-gcc
+ /bin/sh extra/scripts/gen_bits_syscall_h.sh
+ cmp include/bits/sysnum.h include/bits/sysnum.h.new
+ rm -f include/bits/sysnum.h.new
make -C libc/sysdeps/linux/common headers
make[1]: Entering directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/common'
ln -fs ../libc/sysdeps/linux/common/fpu_control.h ../../../..//include/
make[1]: Leaving directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/common'
make -C libc/sysdeps/linux/mips headers
make[1]: Entering directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/mips'
ln -fs ../libc/sysdeps/linux/mips/sgidefs.h ../../../..//include/
ln -fs ../libc/sysdeps/linux/mips/fpu_control.h ../../../..//include/
make[1]: Leaving directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/libc/sysdeps/linux/mips'
make -C  ldso
make[1]: Entering directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/ldso'
echo "const char *_dl_progname=\""ld-uClibc.so.0"\";" \
		> include/dl-progname.h
echo "#include \"mips/elfinterp.c\"" \
		>> include/dl-progname.h
ln -fs ../../include/elf.h include/
ln -fs ../ldso/mips/dl-startup.h include/
ln -fs ../ldso/mips/dl-syscalls.h include/
ln -fs ../ldso/mips/dl-sysdep.h include/
make -C ldso;
make[2]: Entering directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/ldso/ldso'
mips-topan-linux-uclibc-gcc -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-stack-protector -Os -funit-at-a-time -mno-split-addresses -mips1 -fPIC -DUCLIBC_RUNTIME_PREFIX=\"/\" -fno-builtin -nostdinc -D_LIBC -I../../ldso/include -I. -I../../include -isystem /usr/lib/gcc/mips-topan-linux-uclibc/4.1.2/include  -I../libdl -c mips/resolve.S -o mips/resolve.o
mips-topan-linux-uclibc-strip -x -R .note -R .comment mips/resolve.o
mips-topan-linux-uclibc-gcc -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-stack-protector -Os -funit-at-a-time -mno-split-addresses -mips1 -fPIC -DUCLIBC_RUNTIME_PREFIX=\"/\" -fno-builtin -nostdinc -D_LIBC -I../../ldso/include -I. -I../../include -isystem /usr/lib/gcc/mips-topan-linux-uclibc/4.1.2/include -I../libdl -c ldso.c -o ldso.o
ldso.c:74: error: static declaration of '_dl_malloc_addr' follows non-static declaration
../../ldso/include/ldso.h:45: error: previous declaration of '_dl_malloc_addr' was here
ldso.c:75: error: static declaration of '_dl_mmap_zero' follows non-static declaration
../../ldso/include/ldso.h:46: error: previous declaration of '_dl_mmap_zero' was here
In file included from ldso.c:935:
dl-hash.c: In function '_dl_find_hash':
dl-hash.c:150: warning: pointer targets in passing argument 1 of '_dl_elf_hash' differ in signedness
make[2]: *** [ldso.o] Error 1
make[2]: Leaving directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/ldso/ldso'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/work/uClibc-0.9.27/ldso'
make: *** [_dir_ldso] Error 2
 * 
 * ERROR: cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 2470:  Called die
 * The specific snippet of code:
 *       emake || die "could not make";
 *  The die message:
 *   could not make
 * 
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/temp/environment'.
 * This ebuild is from an overlay: '/usr/local/portage/'
 * 

 * Messages for package cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1:

 * This profile has not been tested thoroughly and is not considered to be
 * a supported server profile at this time.  For a supported server
 * profile, please check the Hardened project (http://hardened.gentoo.org).
 * This profile is merely a convenience for people who require a more
 * minimal profile, yet are unable to use hardened due to restrictions in
 * the software being used on the server. This profile should also be used
 * if you require GCC 4.1 or Glibc 2.4 support. If you don't know if this
 * applies to you, then it doesn't and you should probably be using
 * Hardened, instead.
 * You really should consider setting UCLIBC_CPU
 * Otherwise, the build will be generic (read: slow).
 * Available CPU options:
 * 
 * ERROR: cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 2470:  Called die
 * The specific snippet of code:
 *       emake || die "could not make";
 *  The die message:
 *   could not make
 * 
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/cross/mips-topan-linux-uclibc/portage/cross-mips-topan-linux-uclibc/uclibc-0.9.27-r1/temp/environment'.
 * This ebuild is from an overlay: '/usr/local/portage/'
 *