Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 173056 Details for
Bug 248452
[2.6.27.5 regression] ACPI battery power management broken
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
dmesg from -r1 (i.e. working)
dmesg.good (text/plain), 33.90 KB, created by
Leonid Podolny
on 2008-11-23 18:45:49 UTC
(
hide
)
Description:
dmesg from -r1 (i.e. working)
Filename:
MIME Type:
Creator:
Leonid Podolny
Created:
2008-11-23 18:45:49 UTC
Size:
33.90 KB
patch
obsolete
>Linux version 2.6.27-gentoo-r1 (root@looptop) (gcc version 4.3.2 (Gentoo 4.3.2 p1.0) ) #2 SMP PREEMPT Tue Oct 28 00:43:26 IST 2008 >Command line: video=uvesafb:1280x800-32,mtrr:3 root=/dev/sda2 >KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) > BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable) > BIOS-e820: 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) > BIOS-e820: 00000000bf7ae000 - 00000000bf7f0000 (ACPI NVS) > BIOS-e820: 00000000bf7f0000 - 00000000bf800000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) >last_pfn = 0xbf7a0 max_arch_pfn = 0x3ffffffff >x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 >init_memory_mapping > 0000000000 - 00bf600000 page 2M > 00bf600000 - 00bf7a0000 page 4k >kernel direct mapping tables up to bf7a0000 @ 8000-d000 >last_map_addr: bf7a0000 end: bf7a0000 >DMI present. >ACPI: RSDP 000F8CA0, 0014 (r0 ACPIAM) >ACPI: RSDT BF7A0000, 0044 (r1 040808 RSDT1328 20080408 MSFT 97) >ACPI: FACP BF7A0200, 0084 (r2 040808 FACP1328 20080408 MSFT 97) >ACPI: DSDT BF7A05B0, 5ACD (r1 A1221 A1221000 0 INTL 20051117) >ACPI: FACS BF7AE000, 0040 >ACPI: APIC BF7A0390, 005C (r1 040808 APIC1328 20080408 MSFT 97) >ACPI: MCFG BF7A03F0, 003C (r1 040808 OEMMCFG 20080408 MSFT 97) >ACPI: SLIC BF7A0430, 0176 (r1 040808 SLIC1328 20080408 MSFT 97) >ACPI: OEMB BF7AE040, 0071 (r1 040808 OEMB1328 20080408 MSFT 97) >ACPI: HPET BF7A6080, 0038 (r1 040808 OEMHPET 20080408 MSFT 97) >ACPI: GSCI BF7AE0C0, 2024 (r1 040808 GMCHSCI 20080408 MSFT 97) >ACPI: SSDT BF7B0A90, 04F0 (r1 PmRef CpuPm 3000 INTL 20051117) >(5 early reservations) ==> bootmem [0000000000 - 00bf7a0000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] > #2 [0000200000 - 00006f7d98] TEXT DATA BSS ==> [0000200000 - 00006f7d98] > #3 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000] > #4 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] > [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0 >Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 >Movable zone start PFN for each node >early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009a > 0: 0x00000100 -> 0x000bf7a0 >On node 0 totalpages: 784186 > DMA zone: 2560 pages, LIFO batch:0 > DMA32 zone: 769525 pages, LIFO batch:31 >ACPI: PM-Timer IO Port: 0x808 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Setting APIC routing to flat >ACPI: HPET id: 0x8086a201 base: 0xfed00000 >SMP: Allowing 2 CPUs, 0 hotplug CPUs >PM: Registered nosave memory: 000000000009a000 - 000000000009b000 >PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 >PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 >PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 >Allocating PCI resources starting at c0000000 (gap: bf800000:3f600000) >PERCPU: Allocating 46212 bytes of per cpu data >NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1 >Built 1 zonelists in Zone order, mobility grouping on. Total pages: 772085 >Kernel command line: video=uvesafb:1280x800-32,mtrr:3 root=/dev/sda2 >Initializing CPU#0 >Preemptible RCU implementation. >PID hash table entries: 4096 (order: 12, 32768 bytes) >TSC: PIT calibration confirmed by PMTIMER. >TSC: using PIT calibration value >Detected 2194.451 MHz processor. >Console: colour VGA+ 80x25 >console [tty0] enabled >Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >Checking aperture... >No AGP bridge found >Memory: 3081568k/3137152k available (3050k kernel code, 54600k reserved, 1176k data, 340k init) >CPA: page pool initialized 1 of 1 pages preallocated >SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 >hpet clockevent registered >Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.90 BogoMIPS (lpj=2194451) >Mount-cache hash table entries: 256 >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 4096K >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 0 >CPU0: Thermal monitoring enabled (TM2) >using mwait in idle threads. >ACPI: Core revision 20080609 >Parsing all Control Methods: >Table [DSDT](id 0001) - 899 Objects with 70 Devices 209 Methods 32 Regions >Parsing all Control Methods: >Table [SSDT](id 0002) - 15 Objects with 0 Devices 4 Methods 0 Regions > tbxface-0596 [02] tb_load_namespace : ACPI Tables successfully acquired >evxfevnt-0091 [02] enable : Transition to ACPI mode successful >..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b >Using local APIC timer interrupts. >APIC timer calibration result 12468471 >Detected 12.468 MHz APIC timer. >Booting processor 1/1 ip 6000 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=2194392) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 4096K >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >CPU1: Thermal monitoring enabled (TM2) >x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 >CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b >checking TSC synchronization [CPU#0 -> CPU#1]: passed. >Brought up 2 CPUs >Total of 2 processors activated (8777.68 BogoMIPS). >net_namespace: 1464 bytes >NET: Registered protocol family 16 >No dock devices found. >ACPI: bus type pci registered >PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 >PCI: Not using MMCONFIG. >PCI: Using configuration type 1 for base access >evgpeblk-0957 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 >ACPI: EC: Look up EC in DSDT >Completing Region/Field/Buffer/Package initialization:.................................................................................................................................. >Initialized 28/32 Regions 26/26 Fields 40/41 Buffers 36/36 Packages (923 nodes) >Initializing Device/Processor/Thermal objects by executing _INI methods: >Executed 0 _INI methods requiring 0 _STA executions (examined 75 objects) >evgpeblk-1054 [03] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 3 Runtime GPEs in this block >ACPI: Interpreter enabled >ACPI: (supports S0 S1 S3 S4 S5) >ACPI: Using IOAPIC for interrupt routing >PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 >ACPI Error (evregion-0315): No handler for Region [EC__] (ffff8800bf0133a8) [EmbeddedControl] [20080609] >ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080609] >ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node ffff8800bf014dc0), AE_NOT_EXIST >ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node ffff8800bf014dc0), AE_NOT_EXIST >ACPI Error (evregion-0315): No handler for Region [EC__] (ffff8800bf0133a8) [EmbeddedControl] [20080609] >ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080609] >ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node ffff8800bf014dc0), AE_NOT_EXIST >ACPI Error (uteval-0232): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node ffff8800bf014dc0), AE_NOT_EXIST >PCI: MCFG area at e0000000 reserved in ACPI motherboard resources >PCI: Using MMCONFIG at e0000000 - efffffff >ACPI: EC: non-query interrupt received, switching to interrupt mode >ACPI: EC: GPE storm detected, disabling EC GPE >ACPI: EC: missing confirmations, switch off interrupt mode. >ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 >ACPI: EC: driver started in poll mode >ACPI: PCI Root Bridge [PCI0] (0000:00) >PCI: 0000:00:02.0 reg 10 64bit mmio: [fda00000, fdafffff] >PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff] >PCI: 0000:00:02.0 reg 20 io port: [b480, b487] >PCI: 0000:00:02.1 reg 10 64bit mmio: [fdb00000, fdbfffff] >PCI: 0000:00:1a.0 reg 20 io port: [b800, b81f] >PCI: 0000:00:1a.1 reg 20 io port: [b880, b89f] >PCI: 0000:00:1a.7 reg 10 32bit mmio: [fdcff000, fdcff3ff] >pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold >pci 0000:00:1a.7: PME# disabled >PCI: 0000:00:1b.0 reg 10 64bit mmio: [fdcf8000, fdcfbfff] >pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >pci 0000:00:1b.0: PME# disabled >pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >pci 0000:00:1c.0: PME# disabled >pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >pci 0000:00:1c.1: PME# disabled >pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >pci 0000:00:1c.2: PME# disabled >PCI: 0000:00:1d.0 reg 20 io port: [bc00, bc1f] >PCI: 0000:00:1d.1 reg 20 io port: [c000, c01f] >PCI: 0000:00:1d.2 reg 20 io port: [c080, c09f] >PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdcff400, fdcff7ff] >pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >pci 0000:00:1d.7: PME# disabled >pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO >pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO >PCI: 0000:00:1f.1 reg 10 io port: [0, 7] >PCI: 0000:00:1f.1 reg 14 io port: [0, 3] >PCI: 0000:00:1f.1 reg 18 io port: [8f0, 8f7] >PCI: 0000:00:1f.1 reg 1c io port: [8f8, 8fb] >PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf] >PCI: 0000:00:1f.2 reg 10 io port: [cc00, cc07] >PCI: 0000:00:1f.2 reg 14 io port: [c880, c883] >PCI: 0000:00:1f.2 reg 18 io port: [c800, c807] >PCI: 0000:00:1f.2 reg 1c io port: [c480, c483] >PCI: 0000:00:1f.2 reg 20 io port: [c400, c41f] >PCI: 0000:00:1f.2 reg 24 32bit mmio: [fdcff800, fdcfffff] >pci 0000:00:1f.2: PME# supported from D3hot >pci 0000:00:1f.2: PME# disabled >PCI: bridge 0000:00:1c.0 io port: [e000, efff] >PCI: bridge 0000:00:1c.0 32bit mmio: [fe000000, febfffff] >PCI: bridge 0000:00:1c.0 64bit mmio pref: [fa000000, fcffffff] >PCI: 0000:03:00.0 reg 10 io port: [d800, d8ff] >PCI: 0000:03:00.0 reg 18 64bit mmio: [fdfff000, fdffffff] >PCI: 0000:03:00.0 reg 30 32bit mmio: [fdfc0000, fdfdffff] >pci 0000:03:00.0: supports D1 >pci 0000:03:00.0: supports D2 >pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold >pci 0000:03:00.0: PME# disabled >PCI: bridge 0000:00:1c.1 io port: [d000, dfff] >PCI: bridge 0000:00:1c.1 32bit mmio: [fdf00000, fdffffff] >PCI: 0000:02:00.0 reg 10 64bit mmio: [fdefe000, fdefffff] >pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >pci 0000:02:00.0: PME# disabled >PCI: bridge 0000:00:1c.2 32bit mmio: [fde00000, fdefffff] >PCI: 0000:01:04.0 reg 10 32bit mmio: [fddff000, fddff07f] >pci 0000:01:04.0: supports D1 >pci 0000:01:04.0: supports D2 >pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot >pci 0000:01:04.0: PME# disabled >PCI: 0000:01:04.1 reg 10 32bit mmio: [fddff400, fddff4ff] >pci 0000:01:04.1: supports D1 >pci 0000:01:04.1: supports D2 >pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot >pci 0000:01:04.1: PME# disabled >PCI: 0000:01:04.2 reg 10 32bit mmio: [fddff800, fddff87f] >pci 0000:01:04.2: supports D1 >pci 0000:01:04.2: supports D2 >pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot >pci 0000:01:04.2: PME# disabled >PCI: 0000:01:04.3 reg 10 32bit mmio: [fddffc00, fddffcff] >pci 0000:01:04.3: supports D1 >pci 0000:01:04.3: supports D2 >pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot >pci 0000:01:04.3: PME# disabled >pci 0000:00:1e.0: transparent bridge >PCI: bridge 0000:00:1e.0 32bit mmio: [fdd00000, fddfffff] >bus 00 -> node 0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >ACPI: bus type pnp registered >pnp: PnP ACPI: found 13 devices >ACPI: ACPI bus type pnp unregistered >SCSI subsystem initialized >libata version 3.00 loaded. >usbcore: registered new interface driver usbfs >usbcore: registered new interface driver hub >usbcore: registered new device driver usb >PCI: Using ACPI for IRQ routing >PCI-GART: No AMD northbridge found. >hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >hpet0: 3 64-bit timers, 14318180 Hz >ACPI: RTC can wake from S4 >Switched to high resolution mode on CPU 0 >Switched to high resolution mode on CPU 1 >system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved >system 00:08: ioport range 0x400-0x41f has been reserved >system 00:08: ioport range 0x4d0-0x4d1 has been reserved >system 00:08: ioport range 0x800-0x87f has been reserved >system 00:08: ioport range 0x500-0x53f has been reserved >system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved >system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved >system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved >system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved >system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved >system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved >system 00:0c: iomem range 0x0-0x9ffff could not be reserved >system 00:0c: iomem range 0xc0000-0xcffff has been reserved >system 00:0c: iomem range 0xe0000-0xfffff could not be reserved >system 00:0c: iomem range 0x100000-0xbf7fffff could not be reserved >system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved >pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 >pci 0000:00:1c.0: IO window: 0xe000-0xefff >pci 0000:00:1c.0: MEM window: 0xfe000000-0xfebfffff >pci 0000:00:1c.0: PREFETCH window: 0x000000fa000000-0x000000fcffffff >pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 >pci 0000:00:1c.1: IO window: 0xd000-0xdfff >pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff >pci 0000:00:1c.1: PREFETCH window: disabled >pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 >pci 0000:00:1c.2: IO window: disabled >pci 0000:00:1c.2: MEM window: 0xfde00000-0xfdefffff >pci 0000:00:1c.2: PREFETCH window: disabled >pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 >pci 0000:00:1e.0: IO window: disabled >pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff >pci 0000:00:1e.0: PREFETCH window: disabled >pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >pci 0000:00:1c.0: setting latency timer to 64 >pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >pci 0000:00:1c.1: setting latency timer to 64 >pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >pci 0000:00:1c.2: setting latency timer to 64 >pci 0000:00:1e.0: setting latency timer to 64 >bus: 00 index 0 io port: [0, ffff] >bus: 00 index 1 mmio: [0, ffffffffffffffff] >bus: 04 index 0 io port: [e000, efff] >bus: 04 index 1 mmio: [fe000000, febfffff] >bus: 04 index 2 mmio: [fa000000, fcffffff] >bus: 04 index 3 mmio: [0, 0] >bus: 03 index 0 io port: [d000, dfff] >bus: 03 index 1 mmio: [fdf00000, fdffffff] >bus: 03 index 2 mmio: [0, 0] >bus: 03 index 3 mmio: [0, 0] >bus: 02 index 0 mmio: [0, 0] >bus: 02 index 1 mmio: [fde00000, fdefffff] >bus: 02 index 2 mmio: [0, 0] >bus: 02 index 3 mmio: [0, 0] >bus: 01 index 0 mmio: [0, 0] >bus: 01 index 1 mmio: [fdd00000, fddfffff] >bus: 01 index 2 mmio: [0, 0] >bus: 01 index 3 io port: [0, ffff] >bus: 01 index 4 mmio: [0, ffffffffffffffff] >NET: Registered protocol family 2 >IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) >TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >TCP reno registered >NET: Registered protocol family 1 >IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >msgmni has been set to 6019 >io scheduler noop registered >io scheduler cfq registered (default) >pci 0000:00:02.0: Boot video device >pcieport-driver 0000:00:1c.0: setting latency timer to 64 >pcieport-driver 0000:00:1c.0: found MSI capability >pci_express 0000:00:1c.0:pcie00: allocate port service >pci_express 0000:00:1c.0:pcie02: allocate port service >pci_express 0000:00:1c.0:pcie03: allocate port service >pcieport-driver 0000:00:1c.1: setting latency timer to 64 >pcieport-driver 0000:00:1c.1: found MSI capability >pci_express 0000:00:1c.1:pcie00: allocate port service >pci_express 0000:00:1c.1:pcie02: allocate port service >pci_express 0000:00:1c.1:pcie03: allocate port service >pcieport-driver 0000:00:1c.2: setting latency timer to 64 >pcieport-driver 0000:00:1c.2: found MSI capability >pci_express 0000:00:1c.2:pcie00: allocate port service >pci_express 0000:00:1c.2:pcie02: allocate port service >pci_express 0000:00:1c.2:pcie03: allocate port service >hpet_resources: 0xfed00000 is busy >Linux agpgart interface v0.103 >agpgart-intel 0000:00:00.0: Intel 965GM Chipset >agpgart-intel 0000:00:00.0: detected 7676K stolen memory >agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 >uvesafb: Intel Corporation, Intel(r)GM965/PM965/GL960 Graphics Controller, Hardware Version 0.0, OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS, VBE v3.0 >uvesafb: VBIOS/hardware supports DDC2 transfers >uvesafb: monitor limits: vf = 60 Hz, hf = 49 kHz, clk = 68 MHz >uvesafb: scrolling: redraw >Console: switching to colour frame buffer device 160x50 >uvesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010300000, using 7616k, total 7616k >fb0: VESA VGA frame buffer device >r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >r8169 0000:03:00.0: setting latency timer to 64 >eth0: RTL8168b/8111b at 0xffffc2000002c000, 00:1d:92:51:62:f7, XID 38000000 IRQ 508 >Driver 'sd' needs updating - please use bus_type methods >Driver 'sr' needs updating - please use bus_type methods >ahci 0000:00:1f.2: version 3.0 >ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 >ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode >ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems >ahci 0000:00:1f.2: setting latency timer to 64 >scsi0 : ahci >scsi1 : ahci >scsi2 : ahci >ata1: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff900 irq 507 >ata2: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff980 irq 507 >ata3: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcffa00 irq 507 >ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >ata1.00: ATA-8: TOSHIBA MK1646GSX, LB111A, max UDMA/100 >ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) >ata1.00: configured for UDMA/100 >ata2: SATA link down (SStatus 0 SControl 300) >ata3: SATA link down (SStatus 0 SControl 300) >scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5 >sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 sda4 >sd 0:0:0:0: [sda] Attached SCSI disk >sd 0:0:0:0: Attached scsi generic sg0 type 0 >ata_piix 0000:00:1f.1: version 2.12 >ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >ata_piix 0000:00:1f.1: setting latency timer to 64 >scsi3 : ata_piix >scsi4 : ata_piix >ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 >ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 >ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WA03, max UDMA/33 >ata4.00: configured for UDMA/33 >ata5: port disabled. ignoring. >isa bounce pool size: 16 pages >scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WA03 PQ: 0 ANSI: 5 >sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray >Uniform CD-ROM driver Revision: 3.20 >sr 3:0:0:0: Attached scsi CD-ROM sr0 >sr 3:0:0:0: Attached scsi generic sg1 type 5 >ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >ehci_hcd 0000:00:1a.7: setting latency timer to 64 >ehci_hcd 0000:00:1a.7: EHCI Host Controller >ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:00:1a.7: debug port 1 >ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported >ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdcff000 >ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 4 ports detected >usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb1: Product: EHCI Host Controller >usb usb1: Manufacturer: Linux 2.6.27-gentoo-r1 ehci_hcd >usb usb1: SerialNumber: 0000:00:1a.7 >ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 >ehci_hcd 0000:00:1d.7: setting latency timer to 64 >ehci_hcd 0000:00:1d.7: EHCI Host Controller >ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 >ehci_hcd 0000:00:1d.7: debug port 1 >ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported >ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdcff400 >ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 6 ports detected >usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 >usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb2: Product: EHCI Host Controller >usb usb2: Manufacturer: Linux 2.6.27-gentoo-r1 ehci_hcd >usb usb2: SerialNumber: 0000:00:1d.7 >USB Universal Host Controller Interface driver v3.0 >uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >uhci_hcd 0000:00:1a.0: setting latency timer to 64 >uhci_hcd 0000:00:1a.0: UHCI Host Controller >uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 >uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 >usb usb3: configuration #1 chosen from 1 choice >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb3: Product: UHCI Host Controller >usb usb3: Manufacturer: Linux 2.6.27-gentoo-r1 uhci_hcd >usb usb3: SerialNumber: 0000:00:1a.0 >uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 >uhci_hcd 0000:00:1a.1: setting latency timer to 64 >uhci_hcd 0000:00:1a.1: UHCI Host Controller >uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 >uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 >usb usb4: configuration #1 chosen from 1 choice >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb4: Product: UHCI Host Controller >usb usb4: Manufacturer: Linux 2.6.27-gentoo-r1 uhci_hcd >usb usb4: SerialNumber: 0000:00:1a.1 >uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 >uhci_hcd 0000:00:1d.0: setting latency timer to 64 >uhci_hcd 0000:00:1d.0: UHCI Host Controller >uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 >uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 >usb usb5: configuration #1 chosen from 1 choice >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 2 ports detected >usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb5: Product: UHCI Host Controller >usb usb5: Manufacturer: Linux 2.6.27-gentoo-r1 uhci_hcd >usb usb5: SerialNumber: 0000:00:1d.0 >uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 >uhci_hcd 0000:00:1d.1: setting latency timer to 64 >uhci_hcd 0000:00:1d.1: UHCI Host Controller >uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 >uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000 >usb usb6: configuration #1 chosen from 1 choice >hub 6-0:1.0: USB hub found >hub 6-0:1.0: 2 ports detected >usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb6: Product: UHCI Host Controller >usb usb6: Manufacturer: Linux 2.6.27-gentoo-r1 uhci_hcd >usb usb6: SerialNumber: 0000:00:1d.1 >uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >uhci_hcd 0000:00:1d.2: setting latency timer to 64 >uhci_hcd 0000:00:1d.2: UHCI Host Controller >uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 >uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080 >usb usb7: configuration #1 chosen from 1 choice >hub 7-0:1.0: USB hub found >hub 7-0:1.0: 2 ports detected >usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb7: Product: UHCI Host Controller >usb usb7: Manufacturer: Linux 2.6.27-gentoo-r1 uhci_hcd >usb usb7: SerialNumber: 0000:00:1d.2 >PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 >i8042.c: Detected active multiplexing controller, rev 1.1. >serio: i8042 KBD port at 0x60,0x64 irq 1 >serio: i8042 AUX0 port at 0x60,0x64 irq 12 >serio: i8042 AUX1 port at 0x60,0x64 irq 12 >serio: i8042 AUX2 port at 0x60,0x64 irq 12 >serio: i8042 AUX3 port at 0x60,0x64 irq 12 >mice: PS/2 mouse device common for all mice >rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 >rtc0: alarms up to one month, y3k, hpet irqs >device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com >cpuidle: using governor ladder >cpuidle: using governor menu >usb 7-1: new full speed USB device using uhci_hcd and address 2 >usb 7-1: configuration #1 chosen from 1 choice >usb 7-1: New USB device found, idVendor=147e, idProduct=2016 >usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >usb 7-1: Product: Fingerprint Sensor >usb 7-1: Manufacturer: TouchStrip >usbcore: registered new interface driver hiddev >usbcore: registered new interface driver usbhid >usbhid: v2.6:USB HID core driver >TCP cubic registered >NET: Registered protocol family 17 >rtc_cmos 00:03: setting system clock to 2008-11-23 09:40:48 UTC (1227433248) >Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0 >input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input0 >input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >VFS: Mounted root (ext3 filesystem) readonly. >Freeing unused kernel memory: 340k freed >input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 >ACPI: Power Button (FF) [PWRF] >input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0D:00/input/input3 >ACPI: Lid Switch [LID0] >ACPI: SSDT BF7B01C0, 0297 (r1 PmRef Cpu0Ist 3000 INTL 20051117) >Parsing all Control Methods: >Table [SSDT](id 0030) - 6 Objects with 0 Devices 4 Methods 0 Regions >ACPI: SSDT BF7B04F0, 0594 (r1 PmRef Cpu0Cst 3001 INTL 20051117) >Parsing all Control Methods: >Table [SSDT](id 0031) - 1 Objects with 0 Devices 1 Methods 0 Regions >Monitor-Mwait will be used to enter C-1 state >Monitor-Mwait will be used to enter C-2 state >Monitor-Mwait will be used to enter C-3 state >ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >processor ACPI0007:00: registered as cooling_device0 >ACPI: SSDT BF7B00F0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117) >Parsing all Control Methods: >Table [SSDT](id 0035) - 4 Objects with 0 Devices 4 Methods 0 Regions >ACPI: SSDT BF7B0460, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117) >Parsing all Control Methods: >Table [SSDT](id 0036) - 1 Objects with 0 Devices 1 Methods 0 Regions >ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >processor ACPI0007:01: registered as cooling_device1 >Marking TSC unstable due to TSC halts in idle >ACPI: Battery Slot [BAT1] (battery present) >input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0E:00/input/input4 >ACPI: Sleep Button (CM) [SLPB] >input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 >ACPI: Power Button (CM) [PWRB] >ACPI: AC Adapter [ADP1] (off-line) >atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. >acpi device:27: registered as cooling_device2 >input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input6 >atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. >ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) >input: PC Speaker as /devices/platform/pcspkr/input/input7 >HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >HDA Intel 0000:00:1b.0: setting latency timer to 64 >iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks >iwlagn: Copyright(c) 2003-2008 Intel Corporation >thermal LNXTHERM:01: registered as thermal_zone0 >ACPI: Thermal Zone [THRM] (45 C) >iwlagn 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >iwlagn 0000:02:00.0: setting latency timer to 64 >iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 >iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels >iwlagn 0000:02:00.0: PCI INT A disabled >phy0: Selected rate control algorithm 'iwl-agn-rs' >EXT3 FS on sda2, internal journal >kjournald starting. Commit interval 5 seconds >EXT3 FS on sda3, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >fuse init (API version 7.9) >Clocksource tsc unstable (delta = -73291902 ns) >r8169: eth0: link up >r8169: eth0: link up >iwlagn 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106) >firmware: requesting iwlwifi-4965-2.ucode >iwlagn: Radio disabled by HW RF Kill switch >Adding 3068404k swap on /dev/sda4. Priority:-1 extents:1 across:3068404k > CIFS VFS: Error connecting to IPv4 socket. Aborting operation > CIFS VFS: cifs_mount failed w/return code = -111 >NET: Registered protocol family 10 >lo: Disabled Privacy Extensions >ADDRCONF(NETDEV_UP): wlan0: link is not ready >eth0: no IPv6 routers present >atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. >atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. >atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. >atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. >[drm] Initialized drm 1.1.0 20060810 >pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >pci 0000:00:02.0: setting latency timer to 64 >[drm] Initialized i915 1.6.0 20060119 on minor 0 >[drm:i915_getparam] *ERROR* Unknown parameter 5 >atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. >atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. >atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. >atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. >X:3818 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus >reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining >X:3818 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus >reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining >X:3851 freeing invalid memtype d0000000-e0000000 >X:3818 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus >reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining >X:3852 freeing invalid memtype d0000000-e0000000 >X:3818 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus >reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining >X:3899 freeing invalid memtype d0000000-e0000000 >X:3818 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus >reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining >X:3901 freeing invalid memtype d0000000-e0000000 >X:3818 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus >reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining >X:3903 freeing invalid memtype d0000000-e0000000 >atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known. >atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known. >atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. >atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. >atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. >atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). >atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 248452
: 173056 |
173057
|
173675
|
173676
|
173702
|
174161