dmesg.log

dmesg.log (text/plain), 15.09 KB, created by Heiko Baums on 2008-11-19 16:05:24 UTC

0b.0
pci 0000:00:02.1: sharing IRQ 11 with 0000:00:11.0
pci 0000:00:02.1: sharing IRQ 11 with 0000:00:11.2
NET: Registered protocol family 23
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: 0xc7e00000-0xcbefffff
pci 0000:00:01.0:   PREFETCH window: 0x000000a7c00000-0x000000c7cfffff
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [c7e00000, cbefffff]
bus: 01 index 2 mmio: [a7c00000, c7cfffff]
bus: 01 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 1272k freed
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
highmem bounce pool size: 64 pages
squashfs: version 3.4 (2008/08/26) Phillip Lougher
msgmni has been set to 1765
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:0d.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart-sis 0000:00:00.0: SiS chipset [1039/0735]
agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 10240k, total 131072k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at c000:d2b0
vesafb: pmi: set display start = c00cd2e6, set palette = c00cd350
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fbcondecor: console 0 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 0
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
PCI: setting IRQ 12 as level-triggered
e100 0000:00:0d.0: found PCI INT A -> IRQ 12
e100 0000:00:0d.0: sharing IRQ 12 with 0000:00:0b.1
e100 0000:00:0d.0: PME# disabled
e100: eth0: e100_probe: addr 0xcfffa000, irq 12, MAC addr 00:02:b3:63:02:f1
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver
sis5513 0000:00:02.5: SiS735 ATA 100 (2nd gen) controller
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0xd0)
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xff00-0xff07
    ide1: BM-DMA at 0xff08-0xff0f
Probing IDE interface ide0...
hda: WDC WD1600BB-00RDA0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: PLEXTOR DVD-ROM PX-130A, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: UDMA/33 mode selected
hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdd: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: ATAPI 50X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Driver 'sd' needs updating - please use bus_type methods
PCI: setting IRQ 5 as level-triggered
ehci_hcd 0000:00:0b.2: found PCI INT C -> IRQ 5
ehci_hcd 0000:00:0b.2: sharing IRQ 5 with 0000:00:02.2
ehci_hcd 0000:00:0b.2: sharing IRQ 5 with 0000:00:0f.0
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.2: irq 5, io mem 0xcfffdf00
ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-gentoo-r2 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.2: found PCI INT D -> IRQ 5
ohci_hcd 0000:00:02.2: sharing IRQ 5 with 0000:00:0b.2
ohci_hcd 0000:00:02.2: sharing IRQ 5 with 0000:00:0f.0
ohci_hcd 0000:00:02.2: OHCI Host Controller
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.2: irq 5, io mem 0xcfffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-gentoo-r2 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.2
PCI: setting IRQ 10 as level-triggered
ohci_hcd 0000:00:02.3: found PCI INT A -> IRQ 10
ohci_hcd 0000:00:02.3: OHCI Host Controller
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.3: irq 10, io mem 0xcffff000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-gentoo-r2 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.3
ohci_hcd 0000:00:0b.0: found PCI INT A -> IRQ 11
ohci_hcd 0000:00:0b.0: sharing IRQ 11 with 0000:00:02.1
ohci_hcd 0000:00:0b.0: sharing IRQ 11 with 0000:00:11.0
ohci_hcd 0000:00:0b.0: sharing IRQ 11 with 0000:00:11.2
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:0b.0: irq 11, io mem 0xcfffb000
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=059b, idProduct=0370
usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-5: Product: External HD
usb 1-5: Manufacturer: Iomega
usb 1-5: SerialNumber: 15200000088a
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-gentoo-r2 ohci_hcd
usb usb4: SerialNumber: 0000:00:0b.0
ohci_hcd 0000:00:0b.1: found PCI INT B -> IRQ 12
ohci_hcd 0000:00:0b.1: sharing IRQ 12 with 0000:00:0d.0
ohci_hcd 0000:00:0b.1: OHCI Host Controller
ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:0b.1: irq 12, io mem 0xcfffc000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=093a, idProduct=2510
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB OPTICAL MOUSE
usb 3-1: Manufacturer: PIXART
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-gentoo-r2 ohci_hcd
usb usb5: SerialNumber: 0000:00:0b.1
USB Universal Host Controller Interface driver v3.0
usb 4-1: new full speed USB device using ohci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: New USB device found, idVendor=03f0, idProduct=3104
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: DeskJet 960C
usb 4-1: Manufacturer: Hewlett-Packard
usb 4-1: SerialNumber: MY1BP1C1GXRO
usb 4-2: new full speed USB device using ohci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: New USB device found, idVendor=04a9, idProduct=220e
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: CanoScan
usb 4-2: Manufacturer: Canon
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3104
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.3/usb3/3-1/3-1:1.0/input/input0
input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.3-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
IrCOMM protocol (Dag Brattli)
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 236k freed
nvidia: module license 'NVIDIA' taints kernel.
scsi 0:0:0:0: Direct-Access     SAMSUNG  HD501LJ               PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
NVRM: loading NVIDIA UNIX x86 Kernel Module  177.80  Wed Oct  1 14:38:10 PDT 2008
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
cx8800 0000:00:11.0: found PCI INT A -> IRQ 11
cx8800 0000:00:11.0: sharing IRQ 11 with 0000:00:02.1
cx8800 0000:00:11.0: sharing IRQ 11 with 0000:00:0b.0
cx8800 0000:00:11.0: sharing IRQ 11 with 0000:00:11.2
cx88[0]: subsystem: 153b:1166, board: TerraTec Cinergy 1400 DVB-T [card=30,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type 0
input: cx88 IR (TerraTec Cinergy 1400  as /devices/pci0000:00/0000:00:11.0/input/input2
cx88[0]/0: found at 0000:00:11.0, rev: 5, irq: 11, latency: 64, mmio: 0xcd000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:00:11.2: found PCI INT A -> IRQ 11
cx88-mpeg driver manager 0000:00:11.2: sharing IRQ 11 with 0000:00:02.1
cx88-mpeg driver manager 0000:00:11.2: sharing IRQ 11 with 0000:00:0b.0
cx88-mpeg driver manager 0000:00:11.2: sharing IRQ 11 with 0000:00:11.0
cx88[0]/2: found at 0000:00:11.2, rev: 5, irq: 11, latency: 64, mmio: 0xce000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 153b:1166, board: TerraTec Cinergy 1400 DVB-T [card=30]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hda: UDMA/100 mode selected
hda: UDMA/100 mode selected
hdc: UDMA/33 mode selected
hdd: UDMA/33 mode selected
ICE1712 0000:00:0f.0: found PCI INT A -> IRQ 5
ICE1712 0000:00:0f.0: sharing IRQ 5 with 0000:00:02.2
ICE1712 0000:00:0f.0: sharing IRQ 5 with 0000:00:0b.2
fbcondecor: console 1 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 5
fbcondecor: console 6 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 6
fbcondecor: console 7 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 7
fbcondecor: console 8 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 8
fbcondecor: console 9 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 9
fbcondecor: console 10 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 10
fbcondecor: console 11 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 11
Adding 987956k swap on /dev/hda1.  Priority:-1 extents:1 across:987956k
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
fbcondecor: console 6 using theme 'gentoo-blue-tux'
fbcondecor: switched decor state to 'on' on console 6
agpgart-sis 0000:00:00.0: AGP 2.0 bridge
agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
it87: Found IT8705F chip at 0x290, revision 2