[patch] Remove unneeded stuff

remove_unneded_stuff.patch (text/plain), 3.42 KB, created by Zoltan Karcagi on 2008-10-23 15:03:34 UTC

Remove unneded stuff

The removed checks and dependencies apply to the ivtv kernel driver,
not to these utilities.

diff -r 381f64187e5c ivtv-utils-1.3.0.ebuild
--- a/ivtv-utils-1.3.0.ebuild	Thu Oct 23 16:23:53 2008 +0200
+++ b/ivtv-utils-1.3.0.ebuild	Thu Oct 23 16:35:00 2008 +0200
@@ -2,7 +2,7 @@
 # Distributed under the terms of the GNU General Public License v2
 # $Header: /var/cvsroot/gentoo-x86/media-tv/ivtv-utils/ivtv-utils-1.3.0.ebuild,v 1.1 2008/10/21 21:48:41 cardoe Exp $
 
-inherit eutils linux-mod
+inherit eutils
 
 DESCRIPTION="ivtv utilities for Hauppauge PVR PCI cards"
 HOMEPAGE="http://www.ivtvdriver.org"
@@ -12,45 +12,12 @@
 KEYWORDS="~amd64 ~ppc ~x86"
 IUSE="perl"
 RDEPEND=">=sys-fs/udev-103"
-DEPEND="app-arch/unzip"
-PDEPEND=">=media-tv/ivtv-firmware-20070217
-	perl? (
+PDEPEND="perl? (
 		dev-perl/Video-Frequencies
 		dev-perl/Video-ivtv
 		dev-perl/Config-IniFiles
 		virtual/perl-Getopt-Long
 		dev-perl/perl-tk )"
-
-pkg_setup() {
-
-	MODULE_NAMES="saa717x(extra:${S}/i2c-drivers)"
-	BUILD_TARGETS="all"
-	CONFIG_CHECK="EXPERIMENTAL KMOD HAS_IOMEM FW_LOADER I2C I2C_ALGOBIT
-		VIDEO_DEV VIDEO_CAPTURE_DRIVERS VIDEO_V4L1 VIDEO_V4L2
-		!VIDEO_HELPER_CHIPS_AUTO VIDEO_IVTV"
-
-	if ! ( kernel_is ge 2 6 26 ); then
-		eerror "This package is only for the fully in-kernel"
-		eerror "IVTV driver shipping with kernel 2.6.26 and higher"
-		eerror ""
-		eerror "You will need to either:"
-		eerror "a) emerge a different kernel"
-		eerror "b) emerge ivtv"
-		eerror ""
-		eerror "See http://ivtvdriver.org/ for more information"
-		die "This only works on 2.6.26 and newer kernels"
-	fi
-
-	ewarn ""
-	ewarn "Make sure that your I2C and V4L kernel drivers are loaded as"
-	ewarn "modules, and not compiled into the kernel, or IVTV will not"
-	ewarn "work."
-	ewarn ""
-
-	linux-mod_pkg_setup
-
-	BUILD_PARAMS="KDIR=${KV_DIR}"
-}
 
 src_compile() {
 	emake  || die "failed to build"
@@ -65,43 +32,3 @@
 	use perl && dodoc utils/perl/README.ptune
 }
 
-pkg_postinst() {
-	elog ""
-	elog "This version of the IVTV utils supports the following hardware:"
-	elog "Hauppauge WinTV PVR-250"
-	elog "Hauppauge WinTV PVR-350"
-	elog "Hauppauge WinTV PVR-150"
-	elog "Hauppauge WinTV PVR-500"
-	elog "AVerMedia M179"
-	elog "Yuan MPG600/Kuroutoshikou iTVC16-STVLP"
-	elog "Yuan MPG160/Kuroutoshikou iTVC15-STVLP"
-	elog "Yuan PG600/DiamondMM PVR-550 (CX Falcon 2)"
-	elog "Adaptec AVC-2410"
-	elog "Adaptec AVC-2010"
-	elog "Nagase Transgear 5000TV"
-	elog "AOpen VA2000MAX-STN6"
-	elog "Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP"
-	elog "I/O Data GV-MVP/RX"
-	elog "I/O Data GV-MVP/RX2E"
-	elog "Gotview PCI DVD (preliminary support only)"
-	elog "Gotview PCI DVD2 Deluxe"
-	elog "Yuan MPC622"
-	elog ""
-	ewarn ""
-	ewarn "IMPORTANT: In case of problems first read this page:"
-	ewarn "http://www.ivtvdriver.org/index.php/Troubleshooting"
-	ewarn ""
-	ewarn "If any of these conditions match your setup, you may want to look at the"
-	ewarn "README in /usr/share/doc/${PF}/"
-	ewarn ""
-	ewarn " - Using MythTV, a PVR-350 and the ivtvfb module"
-	ewarn " - Using the ivtv X driver and the ivtvfb module"
-	ewarn " - You want to manually build ivtv against v4l-dvb"
-	ewarn ""
-	ewarn "Also, the ivtv package comes with lots of documentation regarding setup,"
-	ewarn "proper use and debugging utilities."
-	ewarn "They are also located in /usr/share/doc/${PF}/"
-	ewarn ""
-	ewarn "For more information, see the IVTV driver homepage at:"
-	ewarn "http://www.ivtvdriver.org/"
-}