dmesg

dmesg.txt (text/plain), 15.11 KB, created by Sven Müller on 2008-10-19 08:48:16 UTC

io resource (0xf000-0xf0fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf100-0xf1fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf200-0xf2fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf400-0xf4fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf500-0xf5fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf600-0xf6fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf800-0xf8fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xf900-0xf9fe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfa00-0xfafe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfc00-0xfcfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfd00-0xfdfe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: io resource (0xfe00-0xfefe) overlaps 0000:00:1e.0 BAR 7 (0xe000-0xffff), disabling
pnp 00:04: mem resource (0xfa000000-0xfbffffff) overlaps 0000:00:1e.0 BAR 8 (0xf4000000-0xfbffffff), disabling
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
irda_init()
NET: Registered protocol family 23
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x880-0x8bf has been reserved
system 00:03: ioport range 0x8c0-0x8df has been reserved
system 00:03: ioport range 0x8e0-0x8ff has been reserved
system 00:09: ioport range 0x900-0x91f has been reserved
system 00:09: ioport range 0x3f0-0x3f1 has been reserved
system 00:10: ioport range 0xbf40-0xbf5f has been reserved
system 00:10: ioport range 0xbf20-0xbf3f has been reserved
system 00:11: iomem range 0xfebffc00-0xfebfffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xc000-0xcfff
pci 0000:00:01.0:   MEM window: 0xfc000000-0xfdffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000e7ffffff
pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:01.0:   IO window: 0x00e000-0x00e0ff
pci 0000:02:01.0:   IO window: 0x00e400-0x00e4ff
pci 0000:02:01.0:   PREFETCH window: 0x30000000-0x33ffffff
pci 0000:02:01.0:   MEM window: 0xf4000000-0xf7ffffff
pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:01.1:   IO window: 0x00e800-0x00e8ff
pci 0000:02:01.1:   IO window: 0x00f000-0x00f0ff
pci 0000:02:01.1:   PREFETCH window: 0x34000000-0x37ffffff
pci 0000:02:01.1:   MEM window: 0x3c000000-0x3fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0xe000-0xffff
pci 0000:00:1e.0:   MEM window: 0xf4000000-0xfbffffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000030000000-0x00000039ffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:02:01.1: enabling device (0000 -> 0003)
pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [c000, cfff]
bus: 01 index 1 mmio: [fc000000, fdffffff]
bus: 01 index 2 mmio: [e0000000, e7ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [e000, ffff]
bus: 02 index 1 mmio: [f4000000, fbffffff]
bus: 02 index 2 mmio: [30000000, 39ffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffff]
bus: 03 index 0 io port: [e000, e0ff]
bus: 03 index 1 io port: [e400, e4ff]
bus: 03 index 2 mmio: [30000000, 33ffffff]
bus: 03 index 3 mmio: [f4000000, f7ffffff]
bus: 07 index 0 io port: [e800, e8ff]
bus: 07 index 1 io port: [f000, f0ff]
bus: 07 index 2 mmio: [34000000, 37ffffff]
bus: 07 index 3 mmio: [3c000000, 3fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 295k freed
Machine check exception polling timer started.
speedstep: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of 500000 nSec.
Loading Reiser4. See www.namesys.com for a description of Reiser4.
Installing knfsd (copyright (C) 1996 [e-mail]).
msgmni has been set to 1003
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto ([e-mail])
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
uvesafb: ATI Technologies Inc., R100, 01.00, OEM: ATI MOBILITY RADEON, VBE v2.0
uvesafb: protected mode interface info at c000:5438
uvesafb: pmi: set display start = c00c54cc, set palette = c00c5518
uvesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=3072
Switched to high resolution mode on CPU 0
Console: switching to colour frame buffer device 128x48
uvesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 6144k, total 16384k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Battery Slot [BAT1] (battery absent)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (55 C)
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.29.0 20080528 on minor 0
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
parport_pc 00:0f: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
lp0: console ready
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Marking TSC unstable due to possible TSC halt in C2
brd: module loaded
loop: module loaded
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others.
0000:02:00.0: 3Com PCI 3c905C Tornado at e081ec00.
Linux video capture interface: v2.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata1.00: ATA-5: IC25N020ATCS04-0, CA2OA72A, max UDMA/100
ata1.00: 39070080 sectors, multi 8: LBA 
ata1.00: configured for UDMA/100
Clocksource tsc unstable (delta = -341200653 ns)
ata2.00: ATAPI: TEAC CD-ROM CD-224E, D.9D, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      IC25N020ATCS04-0 CA2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            TEAC     CD-224E          D.9D PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Yenta: CardBus bridge found at 0000:02:01.0 [1028:00e3]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.0, mfunc 0x01261222, devctl 0x64
Yenta: ISA IRQ mask 0x0418, PCI irq 11
Socket status: 30000020
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff
Yenta: CardBus bridge found at 0000:02:01.1 [1028:00e3]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.1, mfunc 0x01261222, devctl 0x64
Yenta: ISA IRQ mask 0x0418, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
pccard: CardBus card inserted into slot 0
PCI: 0000:03:00.0 reg 10 32bit mmio: [0, ffff]
ath5k_pci 0000:03:00.0: enabling device (0000 -> 0002)
ath5k_pci 0000:03:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
ath5k_pci 0000:03:00.0: registered as 'phy0'
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
intel8x0_measure_ac97_clock: measured 55473 usecs
intel8x0: clocking to 48000
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
ALSA device list:
  #0: Intel 82801CA-ICH3 with CS4205 at irq 5
  #1: Intel 82801CA-ICH3 Modem at irq 5
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
IrCOMM protocol (Dag Brattli)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1, caps: 0x804793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
IBM TrackPoint firmware: 0x0b, buttons: 2/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5
reiser4: sda3: found disk format 4.0.0.
VFS: Mounted root (reiser4 filesystem).
Freeing unused kernel memory: 232k freed
pnp 00:0e: disabled
pnp 00:0e: activated
pnp 00:0e: disabled
pnp 00:0e: activated
ath0: authenticate with AP 00:1d:19:ba:1e:72
ath0: authenticated
ath0: associate with AP 00:1d:19:ba:1e:72
ath0: RX AssocResp from 00:1d:19:ba:1e:72 (capab=0x431 status=0 aid=1)
ath0: associated
Adding 976744k swap on /dev/sda2.  Priority:-1 extents:1 across:976744k
fbcondecor: console 0 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 5
fbcondecor: console 8 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 8
fbcondecor: console 9 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 9
fbcondecor: console 10 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 10
fbcondecor: console 11 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 11
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
mtrr: no MTRR for e0000000,1000000 found
fbcondecor: console 0 using theme 'alley'
fbcondecor: switched decor state to 'on' on console 0
eth0:  setting full-duplex.
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period