The console output from the machine when booted with the driver compiled in.

server_kernel_log (text/plain), 11.32 KB, created by andrew.hampe on 2008-10-01 03:54:56 UTC

Linux version 2.6.25-hardened-r7~hampe-server (root@livecd) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Sun Sep 21 05:15:12 UTC 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000008fffc000 (usable)
 BIOS-e820: 000000008fffc000 - 0000000090000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
1407MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f4fd0] 000f4fd0
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   589820
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   589820
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F4F70, 0014 (r0 COMPAQ)
ACPI: RSDT 8FFFC000, 0030 (r1 COMPAQ P23             2   Ò     162E)
ACPI: FACP 8FFFC040, 0074 (r1 COMPAQ P25             2   Ò     162E)
ACPI: DSDT 8FFFC200, 310F (r1 COMPAQ     DSDT        1 MSFT  100000B)
ACPI: FACS 8FFFC0C0, 0040
ACPI: APIC 8FFFC100, 0074 (r1 COMPAQ 00000083        2             0)
ACPI: SPCR 8FFFC180, 0050 (r1 COMPAQ SPCRRBSU        1   Ò     162E)
ACPI: PM-Timer IO Port: 0x240
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:11 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 6:11 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 2, version 17, address 0xfec01000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Enabling APIC mode:  Flat.  Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 98000000 (gap: 90000000:6ec00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 585213
Kernel command line: root="/dev/cciss/c0d0p1" console=ttyS0,9600
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1125.840 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2319056k/2359280k available (4236k kernel code, 39140k reserved, 658k data, 6120k init, 1441776k highmem)
virtual kernel memory layout:
    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0206000 - 0xc0800000   (6120 kB)
      .data : 0xc1400000 - 0xc14a483c   ( 658 kB)
      .text : 0xc0800000 - 0xc0c23150   (4236 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 2252.86 BogoMIPS (lpj=11264339)
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 490 Objects with 35 Devices 86 Methods 10 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
Booting processor 1/0 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2251.62 BogoMIPS (lpj=11258145)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
Total of 2 processors activated (4504.49 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 244 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
bios32_service: base:000f0000 length:00002000 entry:00000094
PCI: PCI BIOS revision 2.10 entry at 0x94, last bus=10
PCI: Using configuration type 1
Setting up standard PCI resources
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
evgpeblk-1195 [00] ev_gpe_initialize     : There are no GPE blocks defined in the FADT
Completing Region/Field/Buffer/Package initialization:...............................................................................................................................................................................................
Initialized 8/10 Regions 133/133 Fields 46/46 Buffers 4/4 Packages (499 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 42 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Root Bridge [PCI1] (0000:01)
ACPI: PCI Root Bridge [PCI2] (0000:07)
ACPI: PCI Interrupt Link [INA0] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA1] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA2] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA4] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INA5] (IRQs 15) *5
ACPI: PCI Interrupt Link [INA6] (IRQs 15) *10
ACPI: PCI Interrupt Link [INA7] (IRQs 15) *10
ACPI: PCI Interrupt Link [INA8] (IRQs 15) *11
ACPI: PCI Interrupt Link [INA9] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INAA] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INAB] (IRQs *15)
ACPI: PCI Interrupt Link [INAC] (IRQs 15) *0, disabled.
ACPI: PCI Interrupt Link [INAD] (IRQs 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Clocksource tsc unstable (delta = 794504948 ns)
PCI: Device 0000:00:00.0 not found by BIOS
PCI: Device 0000:00:00.1 not found by BIOS
PCI: Device 0000:00:00.2 not found by BIOS
PCI: Device 0000:00:00.3 not found by BIOS
PCI: Device 0000:00:0f.0 not found by BIOS
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0xc06-0xc08 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc49-0xc4a has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6f has been reserved
system 00:01: ioport range 0xc80-0xc83 has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 [e-mail]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:05.0: Firmware left e100 interrupts enabled; disabling
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ACPI: PCI Interrupt 0000:07:07.0[A] -> GSI 23 (level, low) -> IRQ 23
cpqphp: Hot Plug Subsystem Device ID: a2f9
cpqphp: Initializing the PCI hot plug controller residing on PCI bus 7
general protection fault: 0000 [#1] SMP 
Modules linked in:

Pid: 1, comm: swapper Not tainted (2.6.25-hardened-r7~hampe-server #1)
EIP: 00e0:[<000004a7>] EFLAGS: 00010046 CPU: 1
EIP is at 0x4a7
EAX: 0000000e EBX: 00000000 ECX: 000000e8 EDX: 0000b10e
ESI: c0d820f0 EDI: f7c2bdcc EBP: f7c2bdac ESP: f7c2bd98
 DS: 00e8 ES: 00e8 FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 1, ti=f7c2a000 task=f7c28000 task.ti=f7c2a000)
Stack: c1c400e8 f7c2bdcc c0d820f0 000000e8 00000126 00000000 00000246 00353d6b 
       00000060 00350068 001993cc 00000292 f7f51000 10001000 0068f7f5 00000000 
       00000000 f7f2e7bc f7c98800 001a2a2c c0d51724 c0d34852 00000007 c150f8f8 
Call Trace:
 [<00353d6b>] pcibios_get_irq_routing_table+0x7b/0x120
 [<00350068>] ssb_pci_dev_to_bus+0x58/0x70
 [<001993cc>] pci_bus_read_config_word+0x6c/0x90
 [<001a2a2c>] cpqhpc_probe+0xb8c/0x1c90
 [<0018d117>] ida_get_new_above+0x87/0x180
 [<00089171>] ifind+0x31/0x90
 [<000b3cc0>] sysfs_ilookup_test+0x0/0x10
 [<000b4293>] sysfs_addrm_finish+0x13/0x1b0
 [<000b3fa1>] sysfs_find_dirent+0x21/0x30
 [<000b3ff3>] sysfs_add_one+0x43/0xa0
 [<000b408f>] sysfs_addrm_start+0x3f/0xb0
 [<000b4dea>] sysfs_create_link+0x8a/0xf0
 [<00190e11>] simple_strtoul+0xc1/0xd0
 [<001a1ea0>] cpqhpc_probe+0x0/0x1c90
 [<0019d4d6>] pci_device_probe+0x56/0x80
 [<00211e78>] driver_probe_device+0x88/0x170
 [<00405aa3>] klist_next+0x53/0xa0
 [<0021209a>] __driver_attach+0x7a/0x80
 [<002111fa>] bus_for_each_dev+0x3a/0x60
 [<00211cf6>] driver_attach+0x16/0x20
 [<00212020>] __driver_attach+0x0/0x80
 [<00211b9e>] bus_add_driver+0x1be/0x230
 [<0019d420>] pci_device_remove+0x0/0x40
 [<0021223b>] driver_register+0x3b/0xf0
 [<0019d6dd>] __pci_register_driver+0x3d/0x90
 [<ffa43019>] cpqhpc_init+0x39/0x70
 [<ffa2a803>] kernel_init+0x113/0x330
 [<00003300>] enable_hlt+0x0/0x10
 [<00005158>] restore_all+0x0/0x18
 [<ffa2a6f0>] kernel_init+0x0/0x330
 [<ffa2a6f0>] kernel_init+0x0/0x330
 [<000063c7>] kernel_thread_helper+0x7/0x10
 =======================
Code: 00 00 00 00 00 00 00 01 10 0b b8 8c 0c b8 8c 00 00 00 00 00 00 00 00 07 38 0d b8 8c 00 00 00 00 00 00 00 00 00 00 00 51 56 57 06 <26> 66 81 3f c0 00 26 66 c7 07 c0 00 73 08 b4 89 83 4d 04 01 eb 
EIP: [<000004a7>] 0x4a7 SS:ESP 0068:f7c2bd98
---[ end trace 778e504de7e3b1e3 ]---
Kernel panic - not syncing: Attempted to kill init!