log of emergeing uclibc-0.9.28.3-r7 with headers only

cross-i586-pc-linux-uclibc-uclibc-headers.log (text/plain), 22.25 KB, created by Nathan Phillip Brink (binki) (RETIRED) on 2008-08-14 16:13:02 UTC

 * Overlay eclasses override eclasses from PORTDIR:
 * 
 *   '/usr/portage/local/layman/java-gcj-overlay/eclass/java-osgi.eclass'
 *   '/usr/portage/local/layman/java-gcj-overlay/eclass/java-pkg-2.eclass'
 *   '/usr/portage/local/layman/java-gcj-overlay/eclass/java-pkg-opt-2.eclass'
 *   '/usr/portage/local/layman/java-gcj-overlay/eclass/java-utils-2.eclass'
 *   '/usr/portage/local/layman/kde/eclass/kde4-base.eclass'
 *   '/usr/portage/local/layman/kde/eclass/kde4-functions.eclass'
 *   '/usr/portage/local/layman/kde/eclass/kde4-meta.eclass'
 * 
 * It is best to avoid overridding eclasses from PORTDIR because it will
 * trigger invalidation of cached ebuild metadata that is distributed with
 * the portage tree. If you must override eclasses from PORTDIR then you
 * are advised to run `emerge --regen` after each time that you run `emerge
 * --sync`. Set PORTAGE_ECLASS_WARNING_ENABLE="0" in /etc/make.conf if you
 * would like to disable this warning.
>>> Verifying ebuild Manifests...

>>> Emerging (1 of 1) cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7 to /
 * uClibc-0.9.28.3.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                [ ok ]
 * uClibc-0.9.28.3-patches-1.8.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...    [ ok ]
>>> Creating Manifest for /usr/local/portage/cross-i586-pc-linux-uclibc/uclibc
 * checking ebuild checksums ;-) ...                                      [ ok ]
 * checking auxfile checksums ;-) ...                                     [ ok ]
 * checking miscfile checksums ;-) ...                                    [ ok ]
 * checking uClibc-0.9.28.3.tar.bz2 ;-) ...                               [ ok ]
 * checking uClibc-0.9.28.3-patches-1.8.tar.bz2 ;-) ...                   [ ok ]
>>> Unpacking source...
>>> Unpacking uClibc-0.9.28.3.tar.bz2 to /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work
>>> Unpacking uClibc-0.9.28.3-patches-1.8.tar.bz2 to /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work
 * You really should consider setting UCLIBC_CPU
 * Otherwise, the build will be generic (read: slow).
 * Available CPU options:
GENERIC_386 386 486 586 686 586MMX PENTIUMII PENTIUMIII PENTIUM4 K6 K7 ELAN CRUSOE WINCHIPC6 WINCHIP2 CYRIXIII NEHEMIAH

 * Runtime Prefix: /
 * Devel Prefix:   /usr
 * Kernel Prefix:  /usr/i586-pc-linux-uclibc/usr
 * CBUILD:         x86_64-pc-linux-gnu
 * CHOST:          x86_64-pc-linux-gnu
 * CTARGET:        i586-pc-linux-uclibc
 * CPU:            586
 * ENDIAN:         little

>>> Unpacking uClibc-0.9.28.3-patches-1.8.tar.bz2 to /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work/uClibc-0.9.28.3
 * Applying various patches (bugfixes/updates) ...
 *   10_all_uClibc-svn-r11188-posix_memalign.patch ...
  [ ok ]
 *   20_all_uClibc-0.9.28.3-ai-netdb.patch ...
  [ ok ]
 *   30_all_uClibc-svn-r20834-sys_queue.patch ...
  [ ok ]
 *   40_all_uClibc-svn-r16020-readdir_r.patch ...
  [ ok ]
 *   50_all_uClibc-realpath.patch ...
  [ ok ]
 *   60_all_uClibc-splice-tee.patch ...
  [ ok ]
 *   62_all_uClibc-arm-ioperm.patch ...
  [ ok ]
 *   63_all_uClibc-arm-ioperm-outl.patch ...
  [ ok ]
 * Done with patching
 * Applying various patches (bugfixes/updates) ...
 *   10_all_uClibc-0.9.27-susv3-2.patch ...
  [ ok ]
 *   15_all_uClibc-0.9.27-susv3-ldouble-3.patch ...
  [ ok ]
 * Done with patching
conf.c: In function 'strip':
conf.c:46: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
conf.c: In function 'conf_askvalue':
conf.c:94: warning: pointer targets in passing argument 1 of 'fgets' differ in signedness
conf.c: In function 'conf_string':
conf.c:187: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
conf.c:188: warning: pointer targets in assignment differ in signedness
conf.c: In function 'conf_sym':
conf.c:236: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
conf.c:236: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c:236: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
conf.c:236: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c:236: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c:236: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c:248: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
conf.c:248: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c:248: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
conf.c:248: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c:248: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c:248: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
conf.c: In function 'conf_choice':
conf.c:350: warning: pointer targets in passing argument 1 of 'fgets' differ in signedness
conf.c:360: warning: pointer targets in passing argument 1 of 'atoi' differ in signedness
conf.c:384: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
In file included from zconf.tab.c:2125:
confdata.c: In function 'conf_expand_value':
confdata.c:35: warning: pointer targets in passing argument 1 of '__builtin_strchr' differ in signedness
confdata.c:35: warning: pointer targets in assignment differ in signedness
confdata.c:36: warning: pointer targets in passing argument 2 of '__builtin_strncat' differ in signedness
confdata.c:47: warning: pointer targets in passing argument 2 of 'strcat' differ in signedness
confdata.c: In function 'conf_get_default_confname':
confdata.c:58: warning: pointer targets in passing argument 1 of 'conf_expand_value' differ in signedness
confdata.c: In function 'conf_read':
confdata.c:84: warning: pointer targets in passing argument 1 of 'conf_expand_value' differ in signedness
zconf.tab.c: At top level:
lex.zconf.c:2972: warning: 'input' defined but not used
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[2]: i586-pc-linux-uclibc-gcc: Command not found
make[2]: i586-pc-linux-uclibc-gcc: Command not found
make[2]: i586-pc-linux-uclibc-gcc: Command not found
make[2]: i586-pc-linux-uclibc-gcc: Command not found
make[2]: i586-pc-linux-uclibc-gcc: Command not found
make[2]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: i586-pc-linux-uclibc-gcc: Command not found
>>> Source unpacked.
>>> Compiling source in /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work/uClibc-0.9.28.3 ...
make: i586-pc-linux-uclibc-gcc: Command not found
make: i586-pc-linux-uclibc-gcc: Command not found
rm -f -r include/bits
install -d include/bits
#
# using defaults found in .config
#
*
* uClibc Configuration
*
Target Architecture
  1. alpha (TARGET_alpha)
  2. arm (TARGET_arm)
  3. bfin (TARGET_bfin)
  4. cris (TARGET_cris)
  5. e1 (TARGET_e1)
  6. frv (TARGET_frv)
  7. h8300 (TARGET_h8300)
> 8. i386 (TARGET_i386)
  9. i960 (TARGET_i960)
  10. m68k (TARGET_m68k)
  11. microblaze (TARGET_microblaze)
  12. mips (TARGET_mips)
  13. nios (TARGET_nios)
  14. nios2 (TARGET_nios2)
  15. powerpc (TARGET_powerpc)
  16. superh (TARGET_sh)
  17. sh64 (TARGET_sh64)
  18. sparc (TARGET_sparc)
  19. v850 (TARGET_v850)
  20. x86_64 (TARGET_x86_64)
choice[1-20?]: 8
*
* Target Architecture Features and Options
*
Target x86 Processor Family
  1. Generic 386 (CONFIG_GENERIC_386)
  2. 386 (CONFIG_386)
  3. 486 (CONFIG_486)
> 4. Pentium/586/K5/5x86/6x86/6x86MX (CONFIG_586)
  5. Pentium-MMX (CONFIG_586MMX)
  6. Pentium-Pro (CONFIG_686)
  7. Celeron/Pentium-II (CONFIG_PENTIUMII)
  8. Pentium-III/Celeron(Coppermine)/Pentium-III Xeon (CONFIG_PENTIUMIII)
  9. Pentium-4/Celeron(P4-based)/Xeon (CONFIG_PENTIUM4)
  10. K6/K6-II/K6-III (CONFIG_K6)
  11. Athlon/Duron/K7 (CONFIG_K7)
  12. Elan (CONFIG_ELAN)
  13. Crusoe (CONFIG_CRUSOE)
  14. Winchip-C6 (CONFIG_WINCHIPC6)
  15. Winchip-2/Winchip-2A/Winchip-3 (CONFIG_WINCHIP2)
  16. CyrixIII/VIA-C3 (CONFIG_CYRIXIII)
  17. VIA C3-2 (Nehemiah) (CONFIG_NEHEMIAH)
choice[1-17?]: 4
Target Processor Endianness
> 1. Little Endian (ARCH_LITTLE_ENDIAN)
choice[1]: 1
Target CPU has a memory management unit (MMU) (ARCH_HAS_MMU) [Y/?] y
Enable floating point number support (UCLIBC_HAS_FLOATS) [Y/n/?] y
  Target CPU has a floating point unit (FPU) (HAS_FPU) [Y/n/?] y
  Enable full C99 math library support (DO_C99_MATH) [Y/n/?] y
    Enable long double support (UCLIBC_HAS_LONG_DOUBLE_MATH) [Y/n/?] y
Linux kernel header location (KERNEL_SOURCE) [/usr/i586-pc-linux-uclibc/usr] /usr/i586-pc-linux-uclibc/usr
*
* General Library Settings
*
Generate Position Independent Code (PIC) (DOPIC) [Y/n/?] y
Enable support for shared libraries (HAVE_SHARED) [Y/n/?] y
Compile native shared library loader (BUILD_UCLIBC_LDSO) [Y/n/?] y
  Only load shared libraries which can share their text segment (FORCE_SHAREABLE_TEXT_SEGMENTS) [N/y/?] n
  Native shared library loader 'ldd' support (LDSO_LDD_SUPPORT) [Y/n/?] y
  Enable shared library loader cache (LDSO_CACHE_SUPPORT) [Y/n/?] y
  Enable shared library loader preload file support (LDSO_PRELOAD_FILE_SUPPORT) [N/y/?] n
    Shared library loader naming prefix (LDSO_BASE_FILENAME) [ld.so] ld.so
  Enable ELF RUNPATH tag support (LDSO_RUNPATH) [Y/n/?] y
uClibc 0.9.27 compatibility (DL_FINI_CRT_COMPAT) [N/y/?] n
Support global constructors and destructors (UCLIBC_CTOR_DTOR) [Y/n/?] y
POSIX Threading Support (UCLIBC_HAS_THREADS) [Y/n/?] y
  Build pthreads debugging support (PTHREADS_DEBUG_SUPPORT) [Y/n/?] y
Large File Support (UCLIBC_HAS_LFS) [Y/n/?] y
Link ldconfig statically (UCLIBC_STATIC_LDCONFIG) [Y/n/?] y
Malloc Implementation
  1. malloc (MALLOC)
  2. malloc-simple (MALLOC_SIMPLE)
> 3. malloc-standard (MALLOC_STANDARD)
choice[1-3?]: 3
Malloc returns live pointer for malloc(0) (MALLOC_GLIBC_COMPAT) [Y/n/?] y
Dynamic atexit() Support (UCLIBC_DYNAMIC_ATEXIT) [Y/n/?] y
Shadow Password Support (HAS_SHADOW) [Y/n/?] y
Support only Unix 98 PTYs (UNIX98PTY_ONLY) [Y/n/?] y
Assume that /dev/pts is a devpts or devfs file system (ASSUME_DEVPTS) [Y/n/?] y
Support 'struct tm' timezone extension fields (UCLIBC_HAS_TM_EXTENSIONS) [Y/n/?] y
Enable caching of the last valid timezone 'TZ' string (UCLIBC_HAS_TZ_CACHING) [Y/n/?] y
Enable '/etc/TZ' file support to set a default timezone (uClibc-specific) (UCLIBC_HAS_TZ_FILE) [Y/n/?] y
  Repeatedly read the '/etc/TZ' file (UCLIBC_HAS_TZ_FILE_READ_MANY) [N/y/?] n
  Path to the 'TZ' file for setting the global timezone (UCLIBC_TZ_FILE_PATH) [/etc/TZ] /etc/TZ
*
* Networking Support
*
IP version 6 Support (UCLIBC_HAS_IPV6) [Y/n/?] y
Remote Procedure Call (RPC) support (UCLIBC_HAS_RPC) [Y/n/?] y
  Full RPC support (UCLIBC_HAS_FULL_RPC) [Y/n/?] y
*
* String and Stdio Support
*
Use glibc generic string functions (UCLIBC_HAS_STRING_GENERIC_OPT) [Y/n/?] y
Use arch-specific string functions (UCLIBC_HAS_STRING_ARCH_OPT) [Y/n/?] y
Use Table Versions Of 'ctype.h' Functions. (UCLIBC_HAS_CTYPE_TABLES) [Y/n/?] y
  Support Signed Characters In 'ctype.h' Functions. (UCLIBC_HAS_CTYPE_SIGNED) [Y/n/?] y
  ctype argument checking
    1. Do not check -- unsafe (UCLIBC_HAS_CTYPE_UNSAFE)
  > 2. Detect and handle appropriately (UCLIBC_HAS_CTYPE_CHECKED)
    3. Issue a diagnostic and abort() (UCLIBC_HAS_CTYPE_ENFORCED)
  choice[1-3?]: 2
Wide Character Support (UCLIBC_HAS_WCHAR) [Y/n/?] y
Locale Support (UCLIBC_HAS_LOCALE) [N/y/?] n
Support hexadecimal float notation (UCLIBC_HAS_HEXADECIMAL_FLOATS) [Y/n/?] y
Support glibc's register_printf_function() (glibc-compat) (UCLIBC_HAS_GLIBC_CUSTOM_PRINTF) [Y/n/?] y
Maximum number of positional args.  Either 0 or >= 9. (UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS) [9] 9
Support glibc's 'a' flag for scanf string conversions (not implemented) (UCLIBC_HAS_SCANF_GLIBC_A_FLAG) [N/y/?] n
Stdio buffer size
  1. 256 (minimum ANSI/ISO C99 value) (UCLIBC_HAS_STDIO_BUFSIZ_256)
  2. 512 (UCLIBC_HAS_STDIO_BUFSIZ_512)
  3. 1024 (UCLIBC_HAS_STDIO_BUFSIZ_1024)
  4. 2048 (UCLIBC_HAS_STDIO_BUFSIZ_2048)
> 5. 4096 (UCLIBC_HAS_STDIO_BUFSIZ_4096)
  6. 8192 (UCLIBC_HAS_STDIO_BUFSIZ_8192)
choice[1-6?]: 5
Stdio builtin buffer size (uClibc-specific)
> 1. None (UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE)
  2. 4 (UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4)
  3. 8 (UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8)
choice[1-3?]: 1
Attemt to shutdown stdio subsystem when abort() is called. (UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT) [N/y/?] n
Provide a macro version of getc() (UCLIBC_HAS_STDIO_GETC_MACRO) [Y/n/?] y
Provide a macro version of putc() (UCLIBC_HAS_STDIO_PUTC_MACRO) [Y/n/?] y
Support auto-r/w transition (UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION) [Y/n/?] y
Support an fopen() 'F' flag for large file mode (uClibc-specific) (UCLIBC_HAS_FOPEN_LARGEFILE_MODE) [N/y/?] n
Support an fopen() 'x' flag for exclusive mode (glibc-compat) (UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE) [Y/n/?] y
Support fmemopen(), open_memstream(), and fopencookie() (glibc-compat) (UCLIBC_HAS_GLIBC_CUSTOM_STREAMS) [Y/n/?] y
Support the '%m' specifier in printf format strings (glibc-compat) (UCLIBC_HAS_PRINTF_M_SPEC) [Y/n/?] y
Include the errno message text in the library (UCLIBC_HAS_ERRNO_MESSAGES) [Y/n/?] y
  Support sys_errlist[] (obsolete-compat) (UCLIBC_HAS_SYS_ERRLIST) [N/y/?] n
Include the signum message text in the library (UCLIBC_HAS_SIGNUM_MESSAGES) [Y/n/?] y
  Support sys_siglist[] (bsd-compat) (UCLIBC_HAS_SYS_SIGLIST) [N/y/?] n
Support gnu getopt (UCLIBC_HAS_GNU_GETOPT) [Y/n/?] y
*
* Big and Tall
*
Regular Expression Support (UCLIBC_HAS_REGEX) [Y/n/?] y
Support the wordexp() interface (UCLIBC_HAS_WORDEXP) [N/y/?] n
Support the ftw() and nftw() interfaces (UCLIBC_HAS_FTW) [Y/n/?] y
Support the glob() interface (UCLIBC_HAS_GLOB) [Y/n/?] y
*
* Library Installation Options
*
Shared library loader path (SHARED_LIB_LOADER_PREFIX) [/lib] /lib
uClibc runtime library directory (RUNTIME_PREFIX) [/] /
uClibc development environment directory (DEVEL_PREFIX) [/usr] /usr
*
* uClibc security related options
*
Enable security options (UCLIBC_SECURITY) [Y/n] y
  Build utilities as ET_DYN/PIE executables (UCLIBC_BUILD_PIE) [N/y/?] n
  Support for propolice smashing stack protector (UCLIBC_HAS_SSP) [Y/n/?] y
    Use simple guard values without accessing /dev/urandom (SSP_QUICK_CANARY) [Y/n/?] y
    Propolice protection blocking signal
      1. abort (PROPOLICE_BLOCK_ABRT)
      2. segfault (PROPOLICE_BLOCK_SEGV)
    > 3. kill (PROPOLICE_BLOCK_KILL)
    choice[1-3?]: 3
    Build uClibc with propolice protection (UCLIBC_BUILD_SSP) [N/y/?] n
  Build uClibc with RELRO (UCLIBC_BUILD_RELRO) [Y/n/?] y
  Build uClibc with NOW (UCLIBC_BUILD_NOW) [N/y/?] n
  Build uClibc with noexecstack marking (UCLIBC_BUILD_NOEXECSTACK) [Y/n/?] y
*
* uClibc development/debugging options
*
Cross-compiling toolchain prefix (CROSS_COMPILER_PREFIX) [i586-pc-linux-uclibc-] i586-pc-linux-uclibc-
Build uClibc with debugging symbols (DODEBUG) [N/y/?] n
Build pthread with debugging output (DODEBUG_PT) [N/y/?] n
Build uClibc with run-time assertion testing (DOASSERTS) [N/y/?] n
Build the shared library loader with debugging support (SUPPORT_LD_DEBUG) [N/y/?] n
Build the shared library loader with early debugging support (SUPPORT_LD_DEBUG_EARLY) [N/y/?] n
Compiler Warnings (WARNINGS) [-Wall] -Wall
Manuel's hidden warnings (UCLIBC_MJN3_ONLY) [N/y/?] n
+ ./extra/scripts/fix_includes.sh -k /usr/i586-pc-linux-uclibc/usr -t i386
+ TOPDIR=.
+ CC=' i586-pc-linux-uclibc-gcc'
+ /bin/sh extra/scripts/gen_bits_syscall_h.sh
extra/scripts/gen_bits_syscall_h.sh: line 15: i586-pc-linux-uclibc-gcc: command not found
extra/scripts/gen_bits_syscall_h.sh: line 18: i586-pc-linux-uclibc-gcc: command not found
+ cmp include/bits/sysnum.h include/bits/sysnum.h.new
+ mv -f include/bits/sysnum.h.new include/bits/sysnum.h
make -C libc/sysdeps/linux/common headers
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: Entering directory `/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work/uClibc-0.9.28.3/libc/sysdeps/linux/common'
make[1]: i586-pc-linux-uclibc-gcc: Command not found
ln -fs ../libc/sysdeps/linux/common/fpu_control.h ../../../..//include/
make[1]: Leaving directory `/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work/uClibc-0.9.28.3/libc/sysdeps/linux/common'
make -C libc/sysdeps/linux/i386 headers
make[1]: i586-pc-linux-uclibc-gcc: Command not found
make[1]: Entering directory `/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work/uClibc-0.9.28.3/libc/sysdeps/linux/i386'
make[1]: i586-pc-linux-uclibc-gcc: Command not found
ln -fs ../libc/sysdeps/linux/i386/fpu_control.h ../../../../include/
make[1]: Leaving directory `/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/work/uClibc-0.9.28.3/libc/sysdeps/linux/i386'
>>> Source compiled.

>>> Install uclibc-0.9.28.3-r7 into /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image/ category cross-i586-pc-linux-uclibc
make: i586-pc-linux-uclibc-gcc: Command not found
make: i586-pc-linux-uclibc-gcc: Command not found
install -d /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/lib
install -d /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/include
install -m 644 lib/*.[ao] /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/lib/
install: cannot stat `lib/*.[ao]': No such file or directory
make: [install_dev] Error 1 (ignored)
if [ ""/usr/i586-pc-linux-uclibc/usr"" = "/usr/" ] ; then \
		extra_exclude="--exclude include/linux --exclude include/asm'*'" ; \
	else \
		extra_exclude="" ; \
	fi ; \
	tar -chf - include --exclude .svn --exclude CVS $extra_exclude \
		| tar -xf - -C /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/
echo '/* Dont use _syscall#() macros; use the syscall() function */' > \
		/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/include/bits/syscalls.h
# Remove iconv header since locale support is disabled.
rm -f /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/include/iconv.h
# Remove xlocale header since extended locale support is disabled.
rm -f /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/include/xlocale.h
# Remove libintl header since gettext support is disabled.
rm -f /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/include/libintl.h
# Remove wordexp header since wordexp support is disabled.
rm -f /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/include/wordexp.h
find /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/ -name .svn | xargs rm -f -r;
chown -R `id | sed 's/^uid=\([0-9]*\).*gid=\([0-9]*\).*$/\1:\2/'` /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/
for i in `find lib/ -type l -name 'lib[a-zA-Z]*.so' | \
	sed -e 's/lib\///'` ; do \
		ln -sf ../../lib/$i.0 \
		/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/lib/$i; \
	done;
find: `lib/': No such file or directory
ln -sf ../../lib/libthread_db.so.1 \
		/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/lib/libthread_db.so
for i in `find lib/  -type f -name '*.a' | sed -e 's/lib\///'` ; do \
		ln -sf $i /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/lib/`echo $i \
			| sed -e 's/\.a$/_pic.a/'`; \
	done;
find: `lib/': No such file or directory
# Ugh!!! Remember that libdl.a and libdl_pic.a are different.  Since
# libdl is pretty small, and not likely to benefit from mklibs.py and
# similar, lets just remove libdl_pic.a and avoid the issue
rm -f /mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/image//usr/i586-pc-linux-uclibc/usr/lib/libdl_pic.a
cp: cannot stat `utils/ldconfig.host': No such file or directory
 * 
 * ERROR: cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_install
 *             environment, line 2636:  Called die
 * The specific snippet of code:
 *           newbin utils/ldconfig.host ${CTARGET}-ldconfig || die;
 *  The die message:
 *   (no error message)
 * 
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/temp/build.log'.
 * The ebuild environment file is located at '/mnt/bacup/portagetmp/cross/i586-pc-linux-uclibc/portage/cross-i586-pc-linux-uclibc/uclibc-0.9.28.3-r7/temp/environment'.
 * This ebuild is from an overlay: '/usr/local/portage/'
 *