Attachment 161416 Details for Bug 163637 – libserial-9999-gcc43.patch

[patch] libserial-9999-gcc43.patch

libserial-9999-gcc43.patch (text/plain), 23.76 KB, created by Steffen 'j0inty' Stollfuß on 2008-07-26 13:48:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Steffen 'j0inty' Stollfuß

Created: 2008-07-26 13:48:42 UTC

Size: 23.76 KB

patch

obsolete

>### Eclipse Workspace Patch 1.0
>#P libserial
>Index: examples/read_port.cpp
>===================================================================
>--- examples/read_port.cpp	(Revision 91)
>+++ examples/read_port.cpp	(Arbeitskopie)
>@@ -1,5 +1,6 @@
> #include <iostream>
> #include <unistd.h>
>+#include <cstdlib>
> #include <SerialStream.h>
> 
> int
>@@ -12,10 +13,10 @@
>     using namespace LibSerial ;
>     SerialStream serial_port ;
>     serial_port.Open( "/dev/ttyUSB0" ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "[" << __FILE__ << ":" << __LINE__ << "] "
>-                  << "Error: Could not open serial port." 
>+                  << "Error: Could not open serial port."
>                   << std::endl ;
>         exit(1) ;
>     }
>@@ -23,7 +24,7 @@
>     // Set the baud rate of the serial port.
>     //
>     serial_port.SetBaudRate( SerialStreamBuf::BAUD_115200 ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not set the baud rate." << std::endl ;
>         exit(1) ;
>@@ -32,7 +33,7 @@
>     // Set the number of data bits.
>     //
>     serial_port.SetCharSize( SerialStreamBuf::CHAR_SIZE_8 ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not set the character size." << std::endl ;
>         exit(1) ;
>@@ -41,7 +42,7 @@
>     // Disable parity.
>     //
>     serial_port.SetParity( SerialStreamBuf::PARITY_NONE ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not disable the parity." << std::endl ;
>         exit(1) ;
>@@ -50,7 +51,7 @@
>     // Set the number of stop bits.
>     //
>     serial_port.SetNumOfStopBits( 1 ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not set the number of stop bits."
>                   << std::endl ;
>@@ -60,7 +61,7 @@
>     // Turn off hardware flow control.
>     //
>     serial_port.SetFlowControl( SerialStreamBuf::FLOW_CONTROL_NONE ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not use hardware flow control."
>                   << std::endl ;
>@@ -74,20 +75,20 @@
>     //
>     // Wait for some data to be available at the serial port.
>     //
>-    while( serial_port.rdbuf()->in_avail() == 0 ) 
>+    while( serial_port.rdbuf()->in_avail() == 0 )
>     {
>         usleep(100) ;
>     }
>     //
>     // Keep reading data from serial port and print it to the screen.
>     //
>-    while( serial_port.rdbuf()->in_avail() > 0  ) 
>+    while( serial_port.rdbuf()->in_avail() > 0  )
>     {
>         char next_byte;
>         serial_port.get(next_byte);
>         std::cerr << std::hex << static_cast<int>(next_byte) << " ";
>         usleep(100) ;
>-    } 
>+    }
>     std::cerr << std::endl ;
>     return EXIT_SUCCESS ;
> }
>Index: examples/write_port.cpp
>===================================================================
>--- examples/write_port.cpp	(Revision 91)
>+++ examples/write_port.cpp	(Arbeitskopie)
>@@ -1,9 +1,10 @@
> #include <iostream>
> #include <fstream>
>+#include <cstdlib>
> #include <SerialStream.h>
> 
> //
>-// This example reads the contents of a file and writes the entire 
>+// This example reads the contents of a file and writes the entire
> // file to the serial port one character at a time.
> //
> int
>@@ -11,7 +12,7 @@
>       char** argv  )
> {
>     //
>-    if ( argc < 2 ) 
>+    if ( argc < 2 )
>     {
>         std::cerr << "Usage: " << argv[0] << " <filename>" << std::endl ;
>         return 1 ;
>@@ -20,13 +21,13 @@
>     // Open the serial port.
>     //
>     const char* const SERIAL_PORT_DEVICE = "/dev/ttyUSB0" ;
>-    using namespace LibSerial ;    
>+    using namespace LibSerial ;
>     SerialStream serial_port ;
>     serial_port.Open( SERIAL_PORT_DEVICE ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>-        std::cerr << "Error: Could not open serial port " 
>-                  << SERIAL_PORT_DEVICE 
>+        std::cerr << "Error: Could not open serial port "
>+                  << SERIAL_PORT_DEVICE
>                   << std::endl ;
>         exit(1) ;
>     }
>@@ -34,7 +35,7 @@
>     // Set the baud rate of the serial port.
>     //
>     serial_port.SetBaudRate( SerialStreamBuf::BAUD_115200 ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not set the baud rate." << std::endl ;
>         exit(1) ;
>@@ -43,7 +44,7 @@
>     // Set the number of data bits.
>     //
>     serial_port.SetCharSize( SerialStreamBuf::CHAR_SIZE_8 ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not set the character size." << std::endl ;
>         exit(1) ;
>@@ -52,7 +53,7 @@
>     // Disable parity.
>     //
>     serial_port.SetParity( SerialStreamBuf::PARITY_NONE ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not disable the parity." << std::endl ;
>         exit(1) ;
>@@ -61,7 +62,7 @@
>     // Set the number of stop bits.
>     //
>     serial_port.SetNumOfStopBits( 1 ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not set the number of stop bits."
>                   << std::endl ;
>@@ -71,7 +72,7 @@
>     // Turn on hardware flow control.
>     //
>     serial_port.SetFlowControl( SerialStreamBuf::FLOW_CONTROL_NONE ) ;
>-    if ( ! serial_port.good() ) 
>+    if ( ! serial_port.good() )
>     {
>         std::cerr << "Error: Could not use hardware flow control."
>                   << std::endl ;
>@@ -83,27 +84,27 @@
>     //
>     // serial_port.unsetf( std::ios_base::skipws ) ;
>     //
>-    // Open the input file for reading. 
>+    // Open the input file for reading.
>     //
>     std::ifstream input_file( argv[1] ) ;
>-    if ( ! input_file.good() ) 
>+    if ( ! input_file.good() )
>     {
>         std::cerr << "Error: Could not open file "
>                   << argv[1] << " for reading." << std::endl ;
>         return 1 ;
>     }
>     //
>-    // Read characters from the input file and dump them to the serial 
>-    // port. 
>+    // Read characters from the input file and dump them to the serial
>+    // port.
>     //
>     std::cerr << "Dumping file to serial port." << std::endl ;
>-    while( input_file ) 
>+    while( input_file )
>     {
>         char next_byte ;
>         input_file.read( &next_byte, 1 ) ;
>         serial_port.write( &next_byte, 1 ) ;
>         //
>-        // Print a '.' for every character read from the input file. 
>+        // Print a '.' for every character read from the input file.
>         //
>         std::cerr << "." ;
>     }
>Index: src/PosixSignalDispatcher.cpp
>===================================================================
>--- src/PosixSignalDispatcher.cpp	(Revision 91)
>+++ src/PosixSignalDispatcher.cpp	(Arbeitskopie)
>@@ -14,6 +14,7 @@
> #include <map>
> #include <errno.h>
> #include <signal.h>
>+#include <cstring>
> 
> namespace
> {
>@@ -285,8 +286,8 @@
>         }
>         //
>         // :TODO: Why is the following code commented out using "#if 0" ?
>-        // Check and remove this code if it is not necessary. Otherwise, if 
>-        // it has been commented out due to a bug then debug and correct it. 
>+        // Check and remove this code if it is not necessary. Otherwise, if
>+        // it has been commented out due to a bug then debug and correct it.
>         //
> #if 0
>         /*
>Index: src/SerialPort.cpp
>===================================================================
>--- src/SerialPort.cpp	(Revision 91)
>+++ src/SerialPort.cpp	(Arbeitskopie)
>@@ -23,6 +23,7 @@
> #include "PosixSignalHandler.h"
> #include <queue>
> #include <map>
>+#include <cstdlib>
> #include <cerrno>
> #include <cassert>
> #include <termios.h>
>@@ -200,9 +201,9 @@
>     SetDtr( const bool dtrState )
>         throw( SerialPort::NotOpen,
>                std::runtime_error ) ;
>-    
>+
>     bool
>-    GetDtr() const 
>+    GetDtr() const
>         throw( SerialPort::NotOpen,
>                std::runtime_error ) ;
> 
>@@ -210,20 +211,20 @@
>     SetRts( const bool rtsState )
>         throw( SerialPort::NotOpen,
>                std::runtime_error ) ;
>-    
>+
>     bool
>-    GetRts() const 
>+    GetRts() const
>         throw( SerialPort::NotOpen,
>                std::runtime_error ) ;
> 
>     bool
>-    GetCts() const 
>+    GetCts() const
>         throw( SerialPort::NotOpen,
>                std::runtime_error ) ;
> 
>-    
>+
>     bool
>-    GetDsr() const 
>+    GetDsr() const
>         throw( SerialPort::NotOpen,
>                std::runtime_error ) ;
>     /*
>@@ -258,19 +259,19 @@
> 
>     /**
>      * Circular buffer used to store the received data. This is done
>-     * asynchronously and helps prevent overflow of the corresponding 
>+     * asynchronously and helps prevent overflow of the corresponding
>      * tty's input buffer.
>-     * 
>-     * :TODO: The size of this buffer is allowed to increase indefinitely. If 
>-     * data keeps arriving at the serial port and is never read then this 
>-     * buffer will continue occupying more and more memory. We need to put a 
>-     * cap on the size of this buffer. It might even be worth providing a 
>-     * method to set the size of this buffer.  
>+     *
>+     * :TODO: The size of this buffer is allowed to increase indefinitely. If
>+     * data keeps arriving at the serial port and is never read then this
>+     * buffer will continue occupying more and more memory. We need to put a
>+     * cap on the size of this buffer. It might even be worth providing a
>+     * method to set the size of this buffer.
>      */
>     std::queue<unsigned char> mInputBuffer ;
> 
>     /**
>-     * Set the specified modem control line to the specified value. 
>+     * Set the specified modem control line to the specified value.
>      *
>      * @param modemLine One of the following four values: TIOCM_DTR,
>      * TIOCM_RTS, TIOCM_CTS, or TIOCM_DSR.
>@@ -286,7 +287,7 @@
> 
>     /**
>      * Get the current state of the specified modem control line.
>-     * 
>+     *
>      * @param modemLine One of the following four values: TIOCM_DTR,
>      * TIOCM_RTS, TIOCM_CTS, or TIOCM_DSR.
>      *
>@@ -296,7 +297,7 @@
>     bool
>     GetModemControlLine( const int modemLine ) const
>         throw( SerialPort::NotOpen,
>-               std::runtime_error ) ;        
>+               std::runtime_error ) ;
> } ;
> 
> SerialPort::SerialPort( const std::string& serialPortName ) :
>@@ -524,16 +525,16 @@
> void
> SerialPort::SetDtr( const bool dtrState )
>     throw( SerialPort::NotOpen,
>-           std::runtime_error ) 
>+           std::runtime_error )
> {
>     mSerialPortImpl->SetDtr( dtrState ) ;
>     return ;
> }
> 
> bool
>-SerialPort::GetDtr() const 
>+SerialPort::GetDtr() const
>     throw( SerialPort::NotOpen,
>-           std::runtime_error ) 
>+           std::runtime_error )
> {
>     return mSerialPortImpl->GetDtr() ;
> }
>@@ -541,33 +542,33 @@
> void
> SerialPort::SetRts( const bool rtsState )
>     throw( SerialPort::NotOpen,
>-           std::runtime_error ) 
>+           std::runtime_error )
> {
>     mSerialPortImpl->SetRts( rtsState ) ;
>     return ;
> }
> 
> bool
>-SerialPort::GetRts() const 
>+SerialPort::GetRts() const
>     throw( SerialPort::NotOpen,
>-           std::runtime_error ) 
>+           std::runtime_error )
> {
>     return mSerialPortImpl->GetRts() ;
> }
> 
> 
> bool
>-SerialPort::GetCts() const 
>+SerialPort::GetCts() const
>     throw( SerialPort::NotOpen,
>-           std::runtime_error ) 
>+           std::runtime_error )
> {
>     return mSerialPortImpl->GetCts() ;
> }
> 
> bool
>-SerialPort::GetDsr() const 
>+SerialPort::GetDsr() const
>     throw( SerialPort::NotOpen,
>-           std::runtime_error ) 
>+           std::runtime_error )
> {
>     return mSerialPortImpl->GetDsr() ;
> }
>@@ -1443,7 +1444,7 @@
>     throw( SerialPort::NotOpen,
>            std::runtime_error )
> {
>-    this->SetModemControlLine( TIOCM_DTR, 
>+    this->SetModemControlLine( TIOCM_DTR,
>                                dtrState ) ;
>     return ;
> }
>@@ -1455,7 +1456,7 @@
>            std::runtime_error )
> {
>     return this->GetModemControlLine( TIOCM_DTR ) ;
>-}    
>+}
> 
> inline
> void
>@@ -1463,7 +1464,7 @@
>     throw( SerialPort::NotOpen,
>            std::runtime_error )
> {
>-    this->SetModemControlLine( TIOCM_RTS, 
>+    this->SetModemControlLine( TIOCM_RTS,
>                                rtsState ) ;
>     return ;
> }
>@@ -1475,7 +1476,7 @@
>            std::runtime_error )
> {
>     return this->GetModemControlLine( TIOCM_RTS ) ;
>-}    
>+}
> 
> 
> inline
>@@ -1485,7 +1486,7 @@
>            std::runtime_error )
> {
>     return this->GetModemControlLine( TIOCM_CTS ) ;
>-}    
>+}
> 
> 
> inline
>@@ -1495,7 +1496,7 @@
>            std::runtime_error )
> {
>     return this->GetModemControlLine( TIOCM_DSR ) ;
>-}    
>+}
> 
> inline
> void
>@@ -1559,7 +1560,7 @@
>     }
>     //
>     // :TODO: Check to make sure that modemLine is a valid value.
>-    // 
>+    //
>     // Set or unset the specified bit according to the value of
>     // lineState.
>     //
>@@ -1567,19 +1568,19 @@
>     if ( true == lineState )
>     {
>         int set_line_mask = modemLine ;
>-        ioctl_result = ioctl( mFileDescriptor, 
>+        ioctl_result = ioctl( mFileDescriptor,
>                               TIOCMBIS,
>                               &set_line_mask ) ;
>     }
>     else
>     {
>         int reset_line_mask = modemLine ;
>-        ioctl_result = ioctl( mFileDescriptor, 
>+        ioctl_result = ioctl( mFileDescriptor,
>                               TIOCMBIC,
>                               &reset_line_mask ) ;
>     }
>     //
>-    // Check for errors. 
>+    // Check for errors.
>     //
>     if ( -1 == ioctl_result )
>     {
>Index: src/SerialPort.h
>===================================================================
>--- src/SerialPort.h	(Revision 91)
>+++ src/SerialPort.h	(Arbeitskopie)
>@@ -21,7 +21,7 @@
> #define _SerialPort_h_
> 
> 
>-#include <string>
>+#include <cstring>
> #include <vector>
> #include <stdexcept>
> #include <termios.h>
>@@ -40,12 +40,12 @@
>  *
>  * :FIXME: Provide examples of the above potential problem.
>  *
>- * @todo The current implementation does not check if another process has 
>+ * @todo The current implementation does not check if another process has
>  * locked the serial port device and does not lock the serial port device after
>- * opening it. This has been observed to cause problems while using this 
>- * library while other programs such as minicom are also accessing the same device. 
>+ * opening it. This has been observed to cause problems while using this
>+ * library while other programs such as minicom are also accessing the same device.
>  * It will be useful to lock the serial port device when it is being used by
>- * this class. 
>+ * this class.
>  */
> class SerialPort
> {
>@@ -77,7 +77,7 @@
>         // B460800 is defined on Linux but not on Mac OS X. What about other
>         // operating systems ?
>         //
>-#ifdef __linux__       
>+#ifdef __linux__
>         BAUD_460800  = B460800,
> #endif
>         BAUD_DEFAULT = BAUD_57600
>@@ -416,7 +416,7 @@
>      * Get the status of the DTR line.
>      */
>     bool
>-    GetDtr() const 
>+    GetDtr() const
>         throw( NotOpen,
>                std::runtime_error ) ;
> 
>@@ -432,7 +432,7 @@
>      * Get the status of the RTS line.
>      */
>     bool
>-    GetRts() const 
>+    GetRts() const
>         throw( NotOpen,
>                std::runtime_error ) ;
> 
>@@ -440,9 +440,9 @@
>     //SetCts( const bool ctsState = true )
>     //    throw( NotOpen,
>     //           std::runtime_error ) ;
>-    
>+
>     bool
>-    GetCts() const 
>+    GetCts() const
>         throw( NotOpen,
>                std::runtime_error ) ;
> 
>@@ -450,30 +450,30 @@
>     //SetDsr( const bool dsrState = true )
>     //    throw( NotOpen,
>     //           std::runtime_error ) ;
>-    
>+
>     bool
>-    GetDsr() const 
>+    GetDsr() const
>         throw( NotOpen,
>                std::runtime_error ) ;
> private:
> 	/**
>-	 * Prevent copying of objects of this class by declaring the copy 
>-     * constructor private. This method is never defined. 
>+	 * Prevent copying of objects of this class by declaring the copy
>+     * constructor private. This method is never defined.
>      */
>     SerialPort( const SerialPort& otherSerialPort ) ;
>-    
>+
>     /**
>      * Prevent copying of objects of this class by declaring the assignment
>-     * operator private. This method is never defined. 
>+     * operator private. This method is never defined.
>      */
>     SerialPort& operator=(const SerialPort& otherSerialPort ) ;
>-    
>+
>     /*
>      * Forward declaration of the implementation class folowing the
>      * PImpl idiom.
>      */
>     class SerialPortImpl ;
>-    
>+
>     /**
>      * Pointer to implementation class instance.
>      */
>Index: src/SerialStream.h
>===================================================================
>--- src/SerialStream.h	(Revision 91)
>+++ src/SerialStream.h	(Arbeitskopie)
>@@ -8,7 +8,7 @@
> #ifndef _SerialStream_h_
> #define _SerialStream_h_
> 
>-#include <string>
>+#include <cstring>
> #include <fstream>
> #include <SerialStreamBuf.h>
> 
>@@ -42,10 +42,10 @@
>             obtained from <a href="http://www.UNIX-systems.org/">
>             http://www.UNIX-systems.org/</a>. We will refer to this
>             document as SUS-2.
>-	
>+
>             @author $Author: crayzeewulf $ <A HREF="pagey@gnudom.org">Manish P. Pagey</A>
>             @version $Id: SerialStream.h,v 1.5 2004/05/06 18:32:02 crayzeewulf
>-     
>+
>         */
>         class SerialStream : public std::iostream {
>         public:
>@@ -78,11 +78,11 @@
>                 stream is in a good state before using it for any further
>                 I/O operations.
> 
>-                @param fileName The filename of the serial port. 
>-                @param openMode The openmode for the serial port file. 
>+                @param fileName The filename of the serial port.
>+                @param openMode The openmode for the serial port file.
> 
>             */
>-            explicit SerialStream( const std::string fileName, 
>+            explicit SerialStream( const std::string fileName,
>                                    std::ios_base::openmode openMode =
>                                    std::ios::in|std::ios::out) ;
> 
>@@ -92,12 +92,12 @@
> 
>             */
>             explicit SerialStream() ;
>-      
>+
>             /** The destructor. It closes the stream associated with
>                 mFileDescriptor. The rest is done by the fstream destructor.
>-	  
>+
>             */
>-            virtual ~SerialStream() ; 
>+            virtual ~SerialStream() ;
>             //@}
> 
>             /** @name Other Public Methods
>@@ -107,8 +107,8 @@
>                 s and the specified mode, mode.
> 
>             */
>-            void Open( const std::string fileName, 
>-                       std::ios_base::openmode openMode = 
>+            void Open( const std::string fileName,
>+                       std::ios_base::openmode openMode =
>                        std::ios_base::in | std::ios_base::out) ;
> 
>             /** Close the serial port. No communications can occur with the
>@@ -122,7 +122,7 @@
>             */
>             const bool IsOpen() const ;
> 
>-            /** Set the baud rate for serial communications. 
>+            /** Set the baud rate for serial communications.
> 
>             */
>             void SetBaudRate(SerialStreamBuf::BaudRateEnum baudRate ) ;
>@@ -130,8 +130,8 @@
>             /** Get the current baud rate being used for serial
>                 communication. This routine queries the serial port for its
>                 current settings and returns the baud rate that is being
>-                used by the serial port. 
>-	  
>+                used by the serial port.
>+
>                 @return The current baud rate for the serial port.
>                 Note: this is not a constant function because it
>                 checks to see that it is dealing with a SerialStream
>@@ -140,59 +140,59 @@
>             */
>             const SerialStreamBuf::BaudRateEnum BaudRate() ;
> 
>-            /** Set the character size associated with the serial port. 
>-	  
>-            @param size The character size will be set to this value. 
>+            /** Set the character size associated with the serial port.
>+
>+            @param size The character size will be set to this value.
>             */
>             void SetCharSize(const SerialStreamBuf::CharSizeEnum charSize ) ;
> 
>-            /** Get the character size being used for serial communication. 
>-	 
>-            @return The current character size. 
>+            /** Get the character size being used for serial communication.
>+
>+            @return The current character size.
>             */
>             const SerialStreamBuf::CharSizeEnum CharSize() ;
> 
>             /** Set the number of stop bits used during serial
>                 communication. The only valid values are 1 and 2.
> 
>-                @param stop_bits The number of stop bits. (1 or 2). 
>-	  
>+                @param stop_bits The number of stop bits. (1 or 2).
>+
>             */
>             void SetNumOfStopBits(short stop_bits) ;
> 
>             /** Get the number of stop bits being used during serial
>                 communication.
>-	  
>+
>                 @return The number of stop bits.  */
>-            const short NumOfStopBits() ; 
>+            const short NumOfStopBits() ;
> 
>             /** Set the parity for serial communication.
>-	  
>-            @param parity The parity value. 
>-	  
>+
>+            @param parity The parity value.
>+
>             */
>             void SetParity(const SerialStreamBuf::ParityEnum parity) ;
> 
>-            /** Get the current parity setting for the serial port. 
>-	  
>-            @return The parity setting for the serial port. 
>-	  
>+            /** Get the current parity setting for the serial port.
>+
>+            @return The parity setting for the serial port.
>+
>             */
>             const SerialStreamBuf::ParityEnum Parity() ;
> 
>-            /** Use the specified flow control. 
>+            /** Use the specified flow control.
> 
>             */
>-            void 
>+            void
>             SetFlowControl(const SerialStreamBuf::FlowControlEnum flow_c) ;
> 
>-            /** Return the current flow control setting. 
>+            /** Return the current flow control setting.
> 
>             */
>             const SerialStreamBuf::FlowControlEnum FlowControl() ;
> 
>             /** Set character buffer size.
>-                
>+
>             */
>             const short SetVMin( short vtime ) ;
> 
>@@ -200,19 +200,19 @@
>             /** Get current size of character buffer.
>                 Look <A HREF="http://www.unixwiz.net/techtips/termios-vmin-vtime.html">here</A>
>                 for more documentation about VTIME and VMIN.
>-                
>+
>             */
>             const short VMin() ;
> 
>             /** Set character buffer timing in 10th of a second.
>-                
>+
>             */
>             const short SetVTime( short vtime ) ;
> 
>             /** Get current timing of character buffer in 10th of a second.
>                 Look <A HREF="http://www.unixwiz.net/techtips/termios-vmin-vtime.html">here</A>
>                 for more documentation about VTIME and VMIN.
>-                
>+
>             */
>             const short VTime() ;
> 
>@@ -274,7 +274,7 @@
> 
>             /* Enable the serial port receiver. This will allow us to read
>                data from the serial port.
>-       
>+
>                @param enable If true then the received will be
>                enabled. Otherwise it will be disabled.
> 
>@@ -284,7 +284,7 @@
>         } ; // class SerialStream
> 
>         inline
>-        SerialStream::SerialStream() : 
>+        SerialStream::SerialStream() :
>           std::iostream(0), mIOBuffer(0) {
>             //
>             // Close the stream
>@@ -294,7 +294,7 @@
> 
>         inline
>         SerialStream::~SerialStream() {
>-            // 
>+            //
>             // If a SerialStreamBuf is associated with this SerialStream
>             // then we need to destroy it here.
>             //
>@@ -304,7 +304,7 @@
>         }
> 
>         inline
>-        void 
>+        void
>         SerialStream::Close() {
>             //
>             // If a SerialStreamBuf is associated with the SerialStream then

Actions: View | Diff

Attachments on bug 163637: 108053 | 124005 | 161414 | 161416 | 161495 | 172390 | 180405 | 216530