dmesg

dmesg (text/plain), 43.85 KB, created by wbrana on 2008-06-12 18:28:49 UTC

Linux version 2.6.25.6 (root@localhost) (gcc version 3.4.6 (Gentoo 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)) #1 SMP Wed Jun 11 19:12:20 CEST 2008
Command line: root=/dev/md5 vga=normal pci=routeirq lapic usbhid.mousepoll=2 selinux=0
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
 BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
 BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
 BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 158) 0 entries of 256 used
Entering add_active_range(0, 256, 851840) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
end_pfn_map = 1245184
DMI 2.4 present.
ACPI: RSDP 000FB730, 0024 (r2 ACPIAM)
ACPI: XSDT CFF80100, 0054 (r1 A_M_I_ OEMXSDT   6000707 MSFT       97)
ACPI: FACP CFF80290, 00F4 (r3 A_M_I_ OEMFACP   6000707 MSFT       97)
ACPI: DSDT CFF805C0, 884B (r1  A0782 A0782000        0 INTL 20060113)
ACPI: FACS CFF8E000, 0040
ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC   6000707 MSFT       97)
ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG   6000707 MSFT       97)
ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM   6000707 MSFT       97)
ACPI: HPET CFF88E10, 0038 (r1 A_M_I_ OEMHPET   6000707 MSFT       97)
ACPI: GSCI CFF8E0D0, 2024 (r1 A_M_I_ GMCHSCI   6000707 MSFT       97)
Entering add_active_range(0, 0, 158) 0 entries of 256 used
Entering add_active_range(0, 256, 851840) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-9b3257] TEXT DATA BSS
early res: 3 [373ac000-37fef5ff] RAMDISK
early res: 4 [9ec00-a0bff] EBDA
early res: 5 [8000-dfff] PGTABLE
 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
 [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
 [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
 [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
 [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0
 [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0
 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0
 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0
 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0
 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0
 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0
 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1245184
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0:        0 ->      158
    0:      256 ->   851840
    0:  1048576 ->  1245184
On node 0 totalpages: 1048350
  DMA zone: 56 pages used for memmap
  DMA zone: 1984 pages reserved
  DMA zone: 1958 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833464 pages, LIFO batch:31
  Normal zone: 2688 pages used for memmap
  Normal zone: 193920 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33256 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029342
Kernel command line: root=/dev/md5 vga=normal pci=routeirq lapic usbhid.mousepoll=2 selinux=0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 3199.879 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x9e21000 - 0xde21000
Memory: 4030160k/4980736k available (5005k kernel code, 162608k reserved, 1754k data, 316k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 6403.02 BogoMIPS (lpj=3201512)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 24999078
Detected 24.999 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 6399.79 BogoMIPS (lpj=3199896)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 1016 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:06: ioport range 0x290-0x297 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x480-0x4bf has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:07: iomem range 0xfff00000-0xfffffffe could not be reserved
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff has been reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
system 00:0c: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: b000-bfff
  MEM window: 0xfa000000-0xfeafffff
  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: 0x00000000f8f00000-0x00000000f8ffffff
PCI: Bridge: 0000:00:1c.4
  IO window: d000-dfff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: c000-cfff
  MEM window: 0xfeb00000-0xfebfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: e000-efff
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
audit: initializing netlink socket (disabled)
type=2000 audit(1213300866.212:1): initialized
Installing knfsd (copyright (C) 1996 [e-mail]).
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.9)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF90100, 0190 (r1    AMI   CPU1PM        1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: SSDT CFF90290, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
ACPI: ACPI0007:01 is registered as cooling_device1
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
loop: module loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfebfc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
sky2 eth0: addr 00:1d:60:3a:c7:51
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
JMB: IDE controller (0x197b:0x2368 rev 0x00) at  PCI slot 0000:03:00.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
JMB: 100% native mode on irq 16
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:PIO, hdb:PIO
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:PIO, hdd:PIO
Probing IDE interface ide0...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
Driver 'sd' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part 
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 314
ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 314
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 314
ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 314
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST9120822AS, 3.ALB, max UDMA/133
ata1.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133
ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133
ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.AL PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 >
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.6 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 5
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.6 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 6
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.6 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.6 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25.6 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.25.6 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.25.6 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
Initializing USB Mass Storage driver...
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=045e, idProduct=00db
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Natural® Ergonomic Keyboard 4000
usb 5-1: Manufacturer: Microsoft
usb 5-2: new low speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: New USB device found, idVendor=09da, idProduct=000e
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: PS/2+USB Mouse
usb 5-2: Manufacturer: A4Tech
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
input: AT Translated Set 2 keyboard as /class/input/input2
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
w83627ehf: Found W83627DHG chip at 0x290
w83627ehf w83627ehf.656: VID pins in output mode, CPU VID not available
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [e-mail]
cpuidle: using governor ladder
cpuidle: using governor menu
input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input3
input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.2-1
input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input4
input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.2-1
input: A4Tech PS/2+USB Mouse as /class/input/input5
input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.2-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 17
snd-ca0106: Model 1013 Rev 00000000 Serial 10131102
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
  #0: X-Fi Extreme Audio [SBxxxx] at 0xec00 irq 17
GACT probability on
Mirror/redirect action on
netem: version 1.2
u32 classifier
    Performance counters on
    input device check on 
    Actions configured 
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SCTP: Hash tables configured (established 65536 bind 65536)
registered taskstats version 1
md: Autodetecting RAID arrays.
md: Scanned 24 and added 24 devices.
md: autorun ...
md: considering sdc15 ...
md:  adding sdc15 ...
md: sdc14 has different UUID to sdc15
md: sdc13 has different UUID to sdc15
md: sdc12 has different UUID to sdc15
md: sdc11 has different UUID to sdc15
md: sdc10 has different UUID to sdc15
md: sdc9 has different UUID to sdc15
md: sdc8 has different UUID to sdc15
md: sdc7 has different UUID to sdc15
md: sdc6 has different UUID to sdc15
md: sdc5 has different UUID to sdc15
md: sdc1 has different UUID to sdc15
md:  adding sdb15 ...
md: sdb14 has different UUID to sdc15
md: sdb13 has different UUID to sdc15
md: sdb12 has different UUID to sdc15
md: sdb11 has different UUID to sdc15
md: sdb10 has different UUID to sdc15
md: sdb9 has different UUID to sdc15
md: sdb8 has different UUID to sdc15
md: sdb7 has different UUID to sdc15
md: sdb6 has different UUID to sdc15
md: sdb5 has different UUID to sdc15
md: sdb1 has different UUID to sdc15
md: created md15
md: bind<sdb15>
md: bind<sdc15>
md: running: <sdc15><sdb15>
raid1: raid set md15 active with 2 out of 2 mirrors
md: considering sdc14 ...
md:  adding sdc14 ...
md: sdc13 has different UUID to sdc14
md: sdc12 has different UUID to sdc14
md: sdc11 has different UUID to sdc14
md: sdc10 has different UUID to sdc14
md: sdc9 has different UUID to sdc14
md: sdc8 has different UUID to sdc14
md: sdc7 has different UUID to sdc14
md: sdc6 has different UUID to sdc14
md: sdc5 has different UUID to sdc14
md: sdc1 has different UUID to sdc14
md:  adding sdb14 ...
md: sdb13 has different UUID to sdc14
md: sdb12 has different UUID to sdc14
md: sdb11 has different UUID to sdc14
md: sdb10 has different UUID to sdc14
md: sdb9 has different UUID to sdc14
md: sdb8 has different UUID to sdc14
md: sdb7 has different UUID to sdc14
md: sdb6 has different UUID to sdc14
md: sdb5 has different UUID to sdc14
md: sdb1 has different UUID to sdc14
md: created md14
md: bind<sdb14>
md: bind<sdc14>
md: running: <sdc14><sdb14>
raid1: raid set md14 active with 2 out of 2 mirrors
md: considering sdc13 ...
md:  adding sdc13 ...
md: sdc12 has different UUID to sdc13
md: sdc11 has different UUID to sdc13
md: sdc10 has different UUID to sdc13
md: sdc9 has different UUID to sdc13
md: sdc8 has different UUID to sdc13
md: sdc7 has different UUID to sdc13
md: sdc6 has different UUID to sdc13
md: sdc5 has different UUID to sdc13
md: sdc1 has different UUID to sdc13
md:  adding sdb13 ...
md: sdb12 has different UUID to sdc13
md: sdb11 has different UUID to sdc13
md: sdb10 has different UUID to sdc13
md: sdb9 has different UUID to sdc13
md: sdb8 has different UUID to sdc13
md: sdb7 has different UUID to sdc13
md: sdb6 has different UUID to sdc13
md: sdb5 has different UUID to sdc13
md: sdb1 has different UUID to sdc13
md: created md13
md: bind<sdb13>
md: bind<sdc13>
md: running: <sdc13><sdb13>
raid1: raid set md13 active with 2 out of 2 mirrors
md: considering sdc12 ...
md:  adding sdc12 ...
md: sdc11 has different UUID to sdc12
md: sdc10 has different UUID to sdc12
md: sdc9 has different UUID to sdc12
md: sdc8 has different UUID to sdc12
md: sdc7 has different UUID to sdc12
md: sdc6 has different UUID to sdc12
md: sdc5 has different UUID to sdc12
md: sdc1 has different UUID to sdc12
md:  adding sdb12 ...
md: sdb11 has different UUID to sdc12
md: sdb10 has different UUID to sdc12
md: sdb9 has different UUID to sdc12
md: sdb8 has different UUID to sdc12
md: sdb7 has different UUID to sdc12
md: sdb6 has different UUID to sdc12
md: sdb5 has different UUID to sdc12
md: sdb1 has different UUID to sdc12
md: created md12
md: bind<sdb12>
md: bind<sdc12>
md: running: <sdc12><sdb12>
md12: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdc12
raid0:   comparing sdc12(9775424) with sdc12(9775424)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb12
raid0:   comparing sdb12(9775424) with sdc12(9775424)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 19550848 blocks.
raid0 : conf->hash_spacing is 19550848 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc11 ...
md:  adding sdc11 ...
md: sdc10 has different UUID to sdc11
md: sdc9 has different UUID to sdc11
md: sdc8 has different UUID to sdc11
md: sdc7 has different UUID to sdc11
md: sdc6 has different UUID to sdc11
md: sdc5 has different UUID to sdc11
md: sdc1 has different UUID to sdc11
md:  adding sdb11 ...
md: sdb10 has different UUID to sdc11
md: sdb9 has different UUID to sdc11
md: sdb8 has different UUID to sdc11
md: sdb7 has different UUID to sdc11
md: sdb6 has different UUID to sdc11
md: sdb5 has different UUID to sdc11
md: sdb1 has different UUID to sdc11
md: created md11
md: bind<sdb11>
md: bind<sdc11>
md: running: <sdc11><sdb11>
md11: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdc11
raid0:   comparing sdc11(4891648) with sdc11(4891648)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb11
raid0:   comparing sdb11(4891648) with sdc11(4891648)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 9783296 blocks.
raid0 : conf->hash_spacing is 9783296 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc10 ...
md:  adding sdc10 ...
md: sdc9 has different UUID to sdc10
md: sdc8 has different UUID to sdc10
md: sdc7 has different UUID to sdc10
md: sdc6 has different UUID to sdc10
md: sdc5 has different UUID to sdc10
md: sdc1 has different UUID to sdc10
md:  adding sdb10 ...
md: sdb9 has different UUID to sdc10
md: sdb8 has different UUID to sdc10
md: sdb7 has different UUID to sdc10
md: sdb6 has different UUID to sdc10
md: sdb5 has different UUID to sdc10
md: sdb1 has different UUID to sdc10
md: created md10
md: bind<sdb10>
md: bind<sdc10>
md: running: <sdc10><sdb10>
md10: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdc10
raid0:   comparing sdc10(4891648) with sdc10(4891648)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb10
raid0:   comparing sdb10(4891648) with sdc10(4891648)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 9783296 blocks.
raid0 : conf->hash_spacing is 9783296 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc9 ...
md:  adding sdc9 ...
md: sdc8 has different UUID to sdc9
md: sdc7 has different UUID to sdc9
md: sdc6 has different UUID to sdc9
md: sdc5 has different UUID to sdc9
md: sdc1 has different UUID to sdc9
md:  adding sdb9 ...
md: sdb8 has different UUID to sdc9
md: sdb7 has different UUID to sdc9
md: sdb6 has different UUID to sdc9
md: sdb5 has different UUID to sdc9
md: sdb1 has different UUID to sdc9
md: created md9
md: bind<sdb9>
md: bind<sdc9>
md: running: <sdc9><sdb9>
md9: setting max_sectors to 8, segment boundary to 2047
blk_queue_segment_boundary: set to minimum fff
raid0: looking at sdc9
raid0:   comparing sdc9(248896) with sdc9(248896)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb9
raid0:   comparing sdb9(248896) with sdc9(248896)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 497792 blocks.
raid0 : conf->hash_spacing is 497792 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc8 ...
md:  adding sdc8 ...
md: sdc7 has different UUID to sdc8
md: sdc6 has different UUID to sdc8
md: sdc5 has different UUID to sdc8
md: sdc1 has different UUID to sdc8
md:  adding sdb8 ...
md: sdb7 has different UUID to sdc8
md: sdb6 has different UUID to sdc8
md: sdb5 has different UUID to sdc8
md: sdb1 has different UUID to sdc8
md: created md8
md: bind<sdb8>
md: bind<sdc8>
md: running: <sdc8><sdb8>
md8: setting max_sectors to 8, segment boundary to 2047
blk_queue_segment_boundary: set to minimum fff
raid0: looking at sdc8
raid0:   comparing sdc8(4891648) with sdc8(4891648)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb8
raid0:   comparing sdb8(4891648) with sdc8(4891648)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 9783296 blocks.
raid0 : conf->hash_spacing is 9783296 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc7 ...
md:  adding sdc7 ...
md: sdc6 has different UUID to sdc7
md: sdc5 has different UUID to sdc7
md: sdc1 has different UUID to sdc7
md:  adding sdb7 ...
md: sdb6 has different UUID to sdc7
md: sdb5 has different UUID to sdc7
md: sdb1 has different UUID to sdc7
md: created md7
md: bind<sdb7>
md: bind<sdc7>
md: running: <sdc7><sdb7>
md7: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdc7
raid0:   comparing sdc7(4891648) with sdc7(4891648)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb7
raid0:   comparing sdb7(4891648) with sdc7(4891648)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 9783296 blocks.
raid0 : conf->hash_spacing is 9783296 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc6 ...
md:  adding sdc6 ...
md: sdc5 has different UUID to sdc6
md: sdc1 has different UUID to sdc6
md:  adding sdb6 ...
md: sdb5 has different UUID to sdc6
md: sdb1 has different UUID to sdc6
md: created md6
md: bind<sdb6>
md: bind<sdc6>
md: running: <sdc6><sdb6>
md6: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sdc6
raid0:   comparing sdc6(9775424) with sdc6(9775424)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb6
raid0:   comparing sdb6(9775424) with sdc6(9775424)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 19550848 blocks.
raid0 : conf->hash_spacing is 19550848 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc5 ...
md:  adding sdc5 ...
md: sdc1 has different UUID to sdc5
md:  adding sdb5 ...
md: sdb1 has different UUID to sdc5
md: created md5
md: bind<sdb5>
md: bind<sdc5>
md: running: <sdc5><sdb5>
raid1: raid set md5 active with 2 out of 2 mirrors
md: considering sdc1 ...
md:  adding sdc1 ...
md:  adding sdb1 ...
md: created md1
md: bind<sdb1>
md: bind<sdc1>
md: running: <sdc1><sdb1>
raid1: raid set md1 active with 2 out of 2 mirrors
md: ... autorun DONE.
ReiserFS: md5: found reiserfs format "3.6" with standard journal
ReiserFS: md5: using ordered data mode
ReiserFS: md5: journal params: device md5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md5: checking transaction log (md5)
ReiserFS: md5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 316k freed
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.05  Mon May 19 00:03:22 PDT 2008
ReiserFS: md1: found reiserfs format "3.6" with standard journal
ReiserFS: md1: using ordered data mode
ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md1: checking transaction log (md1)
ReiserFS: md1: Using r5 hash to sort names
ReiserFS: md6: found reiserfs format "3.6" with standard journal
ReiserFS: md6: using ordered data mode
ReiserFS: md6: journal params: device md6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md6: checking transaction log (md6)
ReiserFS: md6: Using r5 hash to sort names
ReiserFS: md7: found reiserfs format "3.6" with standard journal
ReiserFS: md7: using ordered data mode
ReiserFS: md7: journal params: device md7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md7: checking transaction log (md7)
ReiserFS: md7: Using r5 hash to sort names
ReiserFS: md8: found reiserfs format "3.6" with standard journal
ReiserFS: md8: using ordered data mode
ReiserFS: md8: journal params: device md8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md8: checking transaction log (md8)
ReiserFS: md8: Using r5 hash to sort names
ReiserFS: md10: found reiserfs format "3.6" with standard journal
ReiserFS: md10: using ordered data mode
ReiserFS: md10: journal params: device md10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md10: checking transaction log (md10)
ReiserFS: md10: Using r5 hash to sort names
ReiserFS: md11: found reiserfs format "3.6" with standard journal
ReiserFS: md11: using ordered data mode
ReiserFS: md11: journal params: device md11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md11: checking transaction log (md11)
ReiserFS: md11: Using r5 hash to sort names
ReiserFS: md9: found reiserfs format "3.6" with standard journal
ReiserFS: md9: using ordered data mode
ReiserFS: md9: journal params: device md9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md9: checking transaction log (md9)
ReiserFS: md9: Using r5 hash to sort names
kjournald starting.  Commit interval 60 seconds
EXT3 FS on md13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 60 seconds
EXT3 FS on md14, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 60 seconds
EXT3 FS on md15, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
ReiserFS: sdb3: found reiserfs format "3.6" with standard journal
ReiserFS: sdb3: using ordered data mode
ReiserFS: sdb3: journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb3: checking transaction log (sdb3)
ReiserFS: sdb3: Using r5 hash to sort names
ReiserFS: sdc3: found reiserfs format "3.6" with standard journal
ReiserFS: sdc3: using ordered data mode
ReiserFS: sdc3: journal params: device sdc3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdc3: checking transaction log (sdc3)
ReiserFS: sdc3: Using r5 hash to sort names