Linux version 2.6.25-gentoo-r1 (root@myth) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP PREEMPT Sun Apr 27 13:48:43 CEST 2008 Command line: initrd=/myth/aoe-initramfs.img.gz real_root=/dev/etherd!e1.0p1 aoe.aoe_deadsecs=604800 forcedeth.max_interrupt_work=35 forcedeth.optimization_mode=0 forcedeth.msi=0 forcedeth.msix=0 forcedeth.dma_64bit=0 aoe.aoe_maxout=256 acpi_os_name="Windows 2000" BOOT_IMAGE=/myth/kernel-genkernel-x86_64-2.6.25-gentoo-r1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data) BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524208) 1 entries of 256 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F98B0, 0024 (r2 ACPIAM) ACPI: XSDT 7FFB0100, 004C (r1 040208 OEMXSDT 20080402 MSFT 97) ACPI: FACP 7FFB0290, 00F4 (r3 040208 OEMFACP 20080402 MSFT 97) ACPI: DSDT 7FFB0440, 6519 (r1 P0004 P0004000 0 INTL 20051117) ACPI: FACS 7FFBE000, 0040 ACPI: APIC 7FFB0390, 006C (r1 040208 OEMAPIC 20080402 MSFT 97) ACPI: MCFG 7FFB0400, 003C (r1 040208 OEMMCFG 20080402 MSFT 97) ACPI: OEMB 7FFBE040, 0071 (r1 040208 AMI_OEM 20080402 MSFT 97) ACPI: HPET 7FFB6960, 0038 (r1 040208 OEMHPET 20080402 MSFT 97) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524208) 1 entries of 256 used early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-7abe67] TEXT DATA BSS early res: 3 [7feb2000-7ff8f47f] RAMDISK early res: 4 [9fc00-a0bff] EBDA early res: 5 [8000-bfff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524208 On node 0 totalpages: 524111 DMA zone: 56 pages used for memmap DMA zone: 1461 pages reserved DMA zone: 2482 pages, LIFO batch:0 DMA32 zone: 7110 pages used for memmap DMA32 zone: 513002 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8300 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ff00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 33144 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515484 Kernel command line: initrd=/myth/aoe-initramfs.img.gz real_root=/dev/etherd!e1.0p1 aoe.aoe_deadsecs=604800 forcedeth.max_interrupt_work=35 forcedeth.optimization_mode=0 forcedeth.msi=0 forcedeth.msix=0 forcedeth.dma_64bit=0 aoe.aoe_maxout=256 acpi_os_name="Windows 2000" BOOT_IMAGE=/myth/kernel-genkernel-x86_64-2.6.25-gentoo-r1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2500.173 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Node 0: aperture @ 6800000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2057016k/2096832k available (3624k kernel code, 38720k reserved, 1513k data, 272k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 5005.00 BogoMIPS (lpj=8339202) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20070126 ACPI: Overriding _OS definition to 'Windows 2000' Using local APIC timer interrupts. APIC timer calibration result 12500882 Detected 12.500 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5002.71 BogoMIPS (lpj=8333951) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02 Brought up 2 CPUs net_namespace: 1016 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:12.0: set SATA to AHCI mode PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x40b-0x40b has been reserved system 00:07: ioport range 0x4d6-0x4d6 has been reserved system 00:07: ioport range 0xc00-0xc01 has been reserved system 00:07: ioport range 0xc14-0xc14 has been reserved system 00:07: ioport range 0xc50-0xc51 has been reserved system 00:07: ioport range 0xc52-0xc52 has been reserved system 00:07: ioport range 0xc6c-0xc6c has been reserved system 00:07: ioport range 0xc6f-0xc6f has been reserved system 00:07: ioport range 0xcd0-0xcd1 has been reserved system 00:07: ioport range 0xcd2-0xcd3 has been reserved system 00:07: ioport range 0xcd4-0xcd5 has been reserved system 00:07: ioport range 0xcd6-0xcd7 has been reserved system 00:07: ioport range 0xcd8-0xcdf has been reserved system 00:07: ioport range 0x800-0x89f has been reserved system 00:07: ioport range 0xb10-0xb1f has been reserved system 00:07: ioport range 0x900-0x90f has been reserved system 00:07: ioport range 0x910-0x91f has been reserved system 00:07: ioport range 0xfe00-0xfefe has been reserved system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved system 00:09: ioport range 0xe00-0xe0f has been reserved system 00:09: ioport range 0xe80-0xe8f has been reserved system 00:09: ioport range 0xf40-0xf4f has been reserved system 00:09: ioport range 0xa30-0xa3f has been reserved system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xcffff has been reserved system 00:0b: iomem range 0xe0000-0xfffff could not be reserved system 00:0b: iomem range 0x100000-0x7fffffff could not be reserved system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: e000-efff MEM window: 0xf7000000-0xf9efffff PREFETCH window: 0x00000000c0000000-0x00000000cfffffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: 0xf9f00000-0xf9ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:14.4 IO window: disabled. MEM window: 0xfa000000-0xfdffffff PREFETCH window: 0x00000000dbf00000-0x00000000dfffffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 885k freed microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded nbd: registered device at major 43 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:00.0 to 64 atl1 0000:02:00.0: version 2.0.7 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 aoe: AoE v47 initialised. ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xf6fff000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xf6ffe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xf6ffd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xf6ffc000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xf6ffb000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xf6ffa000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v3.0 sl811: driver sl811-hcd, 19 May 2005 drivers/usb/host/r8a66597-hcd.c: driver r8a66597_hcd, 29 May 2007 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 rtc_cmos: probe of 00:02 failed with error -16 max6902 spi driver Bluetooth: Virtual HCI driver ver 1.2 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using ohci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using ohci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 2 ports detected usb 5-1: new low speed USB device using ohci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usb 3-2.1: new low speed USB device using ohci_hcd and address 3 usb 3-2.1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: CHICONY HP Basic USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:13.0-1 input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-2.1 input: Logitech USB Receiver as /class/input/input3 input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2.1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver GRE over IPv4 tunneling driver TCP bic registered TCP westwood registered TCP highspeed registered TCP hybla registered TCP htcp registered TCP vegas registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 272k freed atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex aoe: 00119561d514 e1.0 v400a has 25165824 sectors etherd/e1.0: p1 p2 EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on etherd/e1.0p1, internal journal ACPI: duty_cycle spans bit 4 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure lirc_dev: IR Remote Control driver registered, major 61 lirc_imon: no version for "lirc_unregister_plugin" found: kernel tainted. /var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedia IR/VFD w/imon pad2keys patch, v0.3p2k /var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: Venky Raju /var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: imon_probe: found IMON device lirc_dev: lirc_register_plugin: sample_rate: 0 /var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin(minor:0) /var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<5:2> initialized usbcore: registered new interface driver lirc_imon fuse init (API version 7.9) Linux video capture interface: v2.00 cx88/0: cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21 cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected] cx88[0]: TV tuner type 4, Radio tuner type -1 tveeprom 0-0050: Hauppauge model 92001, rev B2B1, serial# 778818 tveeprom 0-0050: MAC address is 00-0D-FE-0B-E2-42 tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4) tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80) tveeprom 0-0050: audio processor is CX883 (idx 32) tveeprom 0-0050: decoder processor is CX883 (idx 22) tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter cx88[0]: hauppauge eeprom: model=92001 input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input4 cx88[0]/0: found at 0000:03:06.0, rev: 5, irq: 21, latency: 64, mmio: 0xfd000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:03:06.2[A] -> GSI 21 (level, low) -> IRQ 21 cx88[0]/2: found at 0000:03:06.2, rev: 5, irq: 21, latency: 64, mmio: 0xfb000000 cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37] cx88[0]/2: cx2388x based DVB/ATSC card DVB: registering new adapter (cx88[0]) DVB: registering frontend 0 (Conexant CX24123/CX24109)... bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 22 (level, low) -> IRQ 22 bttv0: Bt878 (rev 17) at 0000:03:07.0, irq: 22, latency: 64, mmio: 0xdbfff000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init] bttv0: tuner absent bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:03:07.1[A] -> GSI 22 (level, low) -> IRQ 22 bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions. bt878(0): Bt878 (rev 17) at 03:07.1, irq: 22, latency: 64, memory: 0xdbffe000 DVB: registering new adapter (bttv0) dst(0) dst_get_device_id: Recognise [DTTDIG] DST type flags : 0x10 firmware version = 2 dst(0) dst_get_mac: MAC Address=[00:08:ca:13:7e:00] DVB: registering frontend 1 (DST DVB-T)... ivtv: Start initialization, version 1.2.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 20 tveeprom 2-0050: Hauppauge model 26034, rev C197, serial# 8087370 tveeprom 2-0050: tuner model is TCL 2002MB_3H (idx 97, type 55) tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44) tveeprom 2-0050: audio processor is CX25842 (idx 36) tveeprom 2-0050: decoder processor is CX25842 (idx 29) tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: Reopen i2c bus for IR-blaster support cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 2-0061: type set to 55 (TCL 2002MB) ivtv0: Registered device video1 for encoder MPG (16384 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi1 for encoder VBI (4096 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 ivtv: End initialization /var/tmp/portage/media-tv/sasc-ng-0.1_p169/work/sasc-ng-0.1_p169/dvbloopback/module/dvb_loopback.c: frontend loopback driver v0.0.1 dvbloopback: registering 2 adapters DVB: registering new adapter (DVB-LOOPBACK) DVB: registering new adapter (DVB-LOOPBACK) device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex NET: Registered protocol family 10 lo: Disabled Privacy Extensions hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { AbortedCommand } ide: failed opcode was: 0xef hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { AbortedCommand } ide: failed opcode was: 0xe3 hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_in_intr: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec /var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: VFD port opened usbcore: registered new interface driver snd-usb-audio it87: Found IT8716F chip at 0xe80, revision 1 it87: in3 is VCC (+5V) warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) netconsole: local port 515 netconsole: local IP 192.168.0.15 netconsole: interface eth0 netconsole: remote port 515 netconsole: remote IP 192.168.0.1 netconsole: remote ethernet address 00:11:95:61:d5:14 console [netcon0] enabled netconsole: network logging started eth0: no IPv6 routers present ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 NVRM: bad caching on address 0xffff810076cd6000: actual 0x173 != expected 0x17b NVRM: please see the README section on Cache Aliasing for more information NVRM: bad caching on address 0xffff810076cd7000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff810076d89000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff8100725b9000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff810072546000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff810076d05000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff810076d04000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff810076cff000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff810076d00000: actual 0x173 != expected 0x17b NVRM: bad caching on address 0xffff810076d01000: actual 0x173 != expected 0x17b /var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: IR port opened