dmesg with cool'n'quiet enabled

dmesg.with-coolandquiet.txt (text/plain), 26.43 KB, created by pakar on 2008-05-14 17:06:41 UTC

Linux version 2.6.25-gentoo-r1 (root@myth) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP PREEMPT Sun Apr 27 13:48:43 CEST 2008
Command line: initrd=/myth/aoe-initramfs.img.gz real_root=/dev/etherd!e1.0p1 aoe.aoe_deadsecs=604800 forcedeth.max_interrupt_work=35 forcedeth.optimization_mode=0 forcedeth.msi=0 forcedeth.msix=0 forcedeth.dma_64bit=0 aoe.aoe_maxout=256 acpi_os_name="Windows 2000" BOOT_IMAGE=/myth/kernel-genkernel-x86_64-2.6.25-gentoo-r1 
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
 BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
 BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
 BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524208) 1 entries of 256 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F98B0, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFB0100, 0054 (r1 040208 OEMXSDT  20080402 MSFT       97)
ACPI: FACP 7FFB0290, 00F4 (r3 040208 OEMFACP  20080402 MSFT       97)
ACPI: DSDT 7FFB0440, 6519 (r1  P0004 P0004000        0 INTL 20051117)
ACPI: FACS 7FFBE000, 0040
ACPI: APIC 7FFB0390, 006C (r1 040208 OEMAPIC  20080402 MSFT       97)
ACPI: MCFG 7FFB0400, 003C (r1 040208 OEMMCFG  20080402 MSFT       97)
ACPI: OEMB 7FFBE040, 0071 (r1 040208 AMI_OEM  20080402 MSFT       97)
ACPI: HPET 7FFB6960, 0038 (r1 040208 OEMHPET  20080402 MSFT       97)
ACPI: SSDT 7FFB69A0, 028A (r1 A M I  POWERNOW        1 AMD         1)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 524208) 1 entries of 256 used
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-7abe67] TEXT DATA BSS
early res: 3 [7feb2000-7ff8f47f] RAMDISK
early res: 4 [9fc00-a0bff] EBDA
early res: 5 [8000-bfff] PGTABLE
 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   524208
On node 0 totalpages: 524111
  DMA zone: 56 pages used for memmap
  DMA zone: 1461 pages reserved
  DMA zone: 2482 pages, LIFO batch:0
  DMA32 zone: 7110 pages used for memmap
  DMA32 zone: 513002 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ATI board detected. Disabling timer routing over 8254.
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8300 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ff00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33144 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515484
Kernel command line: initrd=/myth/aoe-initramfs.img.gz real_root=/dev/etherd!e1.0p1 aoe.aoe_deadsecs=604800 forcedeth.max_interrupt_work=35 forcedeth.optimization_mode=0 forcedeth.msi=0 forcedeth.msix=0 forcedeth.dma_64bit=0 aoe.aoe_maxout=256 acpi_os_name="Windows 2000" BOOT_IMAGE=/myth/kernel-genkernel-x86_64-2.6.25-gentoo-r1 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2500.166 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Node 0: aperture @ 6800000000 size 32 MB
Aperture beyond 4GB. Ignoring.
No AGP bridge found
Memory: 2057016k/2096832k available (3624k kernel code, 38720k reserved, 1513k data, 272k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 5005.99 BogoMIPS (lpj=8339195)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
ACPI: Overriding _OS definition to 'Windows 2000'
Using local APIC timer interrupts.
APIC timer calibration result 12500841
Detected 12.500 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5002.71 BogoMIPS (lpj=8333949)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
Brought up 2 CPUs
net_namespace: 1016 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Error attaching device data
ACPI: Error attaching device data
ACPI: Error attaching device data
ACPI: Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:12.0: set SATA to AHCI mode
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x40b-0x40b has been reserved
system 00:07: ioport range 0x4d6-0x4d6 has been reserved
system 00:07: ioport range 0xc00-0xc01 has been reserved
system 00:07: ioport range 0xc14-0xc14 has been reserved
system 00:07: ioport range 0xc50-0xc51 has been reserved
system 00:07: ioport range 0xc52-0xc52 has been reserved
system 00:07: ioport range 0xc6c-0xc6c has been reserved
system 00:07: ioport range 0xc6f-0xc6f has been reserved
system 00:07: ioport range 0xcd0-0xcd1 has been reserved
system 00:07: ioport range 0xcd2-0xcd3 has been reserved
system 00:07: ioport range 0xcd4-0xcd5 has been reserved
system 00:07: ioport range 0xcd6-0xcd7 has been reserved
system 00:07: ioport range 0xcd8-0xcdf has been reserved
system 00:07: ioport range 0x800-0x89f has been reserved
system 00:07: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x900-0x90f has been reserved
system 00:07: ioport range 0x910-0x91f has been reserved
system 00:07: ioport range 0xfe00-0xfefe has been reserved
system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:09: ioport range 0xe00-0xe0f has been reserved
system 00:09: ioport range 0xe80-0xe8f has been reserved
system 00:09: ioport range 0xf40-0xf4f has been reserved
system 00:09: ioport range 0xa30-0xa3f has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0xc0000-0xcffff has been reserved
system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
system 00:0b: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:02.0
  IO window: e000-efff
  MEM window: 0xf7000000-0xf9efffff
  PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: 0xf9f00000-0xf9ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:14.4
  IO window: disabled.
  MEM window: 0xfa000000-0xfdffffff
  PREFETCH window: 0x00000000dbf00000-0x00000000dfffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 885k freed
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
atl1 0000:02:00.0: version 2.0.7
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
aoe: AoE v47 initialised.
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xf6fff000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xf6ffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xf6ffd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xf6ffc000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xf6ffb000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xf6ffa000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
drivers/usb/host/r8a66597-hcd.c: driver r8a66597_hcd, 29 May 2007
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
rtc_cmos: probe of 00:02 failed with error -16
max6902 spi driver
Bluetooth: Virtual HCI driver ver 1.2
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using ohci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 2 ports detected
usb 5-1: new low speed USB device using ohci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 3-2.1: new low speed USB device using ohci_hcd and address 3
usb 3-2.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: CHICONY HP Basic USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:13.0-1
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-2.1
input: Logitech USB Receiver as /class/input/input3
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
GRE over IPv4 tunneling driver
TCP bic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 272k freed
atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex
atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex
aoe: 00119561d514 e1.0 v400a has 25165824 sectors
 etherd/e1.0: p1 p2
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on etherd/e1.0p1, internal journal
ACPI: duty_cycle spans bit 4
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x11 (2500 MHz), vid 0x8
powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0x9
powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xb
powernow-k8:    3 : fid 0xc (2000 MHz), vid 0xd
powernow-k8:    4 : fid 0xa (1800 MHz), vid 0xf
powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
lirc_dev: IR Remote Control driver registered, major 61 
lirc_imon: no version for "lirc_unregister_plugin" found: kernel tainted.
/var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedia IR/VFD w/imon pad2keys patch, v0.3p2k
/var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: Venky Raju <[e-mail]>
/var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: imon_probe: found IMON device
lirc_dev: lirc_register_plugin: sample_rate: 0
/var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin(minor:0)
/var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<5:2> initialized
usbcore: registered new interface driver lirc_imon
fuse init (API version 7.9)
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
tveeprom 0-0050: Hauppauge model 92001, rev B2B1, serial# 778818
tveeprom 0-0050: MAC address is 00-0D-FE-0B-E2-42
tveeprom 0-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 0-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 0-0050: audio processor is CX883 (idx 32)
tveeprom 0-0050: decoder processor is CX883 (idx 22)
tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=92001
input: cx88 IR (Hauppauge Nova-S-Plus  as /class/input/input4
cx88[0]/0: found at 0000:03:06.0, rev: 5, irq: 21, latency: 64, mmio: 0xfd000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:03:06.2[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:03:06.2, rev: 5, irq: 21, latency: 64, mmio: 0xfb000000
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 22 (level, low) -> IRQ 22
bttv0: Bt878 (rev 17) at 0000:03:07.0, irq: 22, latency: 64, mmio: 0xdbfff000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init]
bttv0: tuner absent
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:03:07.1[A] -> GSI 22 (level, low) -> IRQ 22
bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
bt878(0): Bt878 (rev 17) at 03:07.1, irq: 22, latency: 64, memory: 0xdbffe000
DVB: registering new adapter (bttv0)
dst(0) dst_get_device_id: Recognise [DTTDIG]
DST type flags : 0x10 firmware version = 2
dst(0) dst_get_mac: MAC Address=[00:08:ca:13:7e:00]
DVB: registering frontend 1 (DST DVB-T)...
ivtv:  Start initialization, version 1.2.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 20 (level, low) -> IRQ 20
tveeprom 2-0050: Hauppauge model 26034, rev C197, serial# 8087370
tveeprom 2-0050: tuner model is TCL 2002MB_3H (idx 97, type 55)
tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 2-0050: audio processor is CX25842 (idx 36)
tveeprom 2-0050: decoder processor is CX25842 (idx 29)
tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: Reopen i2c bus for IR-blaster support
cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 2-0061: type set to 55 (TCL 2002MB)
ivtv0: Registered device video1 for encoder MPG (16384 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi1 for encoder VBI (4096 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ivtv:  End initialization
/var/tmp/portage/media-tv/sasc-ng-0.1_p169/work/sasc-ng-0.1_p169/dvbloopback/module/dvb_loopback.c: frontend loopback driver v0.0.1
dvbloopback: registering 2 adapters
DVB: registering new adapter (DVB-LOOPBACK)
DVB: registering new adapter (DVB-LOOPBACK)
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [e-mail]
atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xe3
hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_in_intr: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
/var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: VFD port opened
usbcore: registered new interface driver snd-usb-audio
eth0: no IPv6 routers present
it87: Found IT8716F chip at 0xe80, revision 1
it87: in3 is VCC (+5V)
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
netconsole: local port 515
netconsole: local IP 192.168.0.15
netconsole: interface eth0
netconsole: remote port 515
netconsole: remote IP 192.168.0.1
netconsole: remote ethernet address 00:11:95:61:d5:14
console [netcon0] enabled
netconsole: network logging started
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
Clocksource tsc unstable (delta = -123560096 ns)
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
NVRM: bad caching on address 0xffff8100729a8000: actual 0x173 != expected 0x17b
NVRM: please see the README section on Cache Aliasing for more information
NVRM: bad caching on address 0xffff8100729a9000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073447000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073451000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073452000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073453000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073454000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073455000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073456000: actual 0x173 != expected 0x17b
NVRM: bad caching on address 0xffff810073457000: actual 0x173 != expected 0x17b
/var/tmp/portage/app-misc/lirc-0.8.3_pre1/work/lirc-0.8.3pre1/drivers/lirc_imon/lirc_imon.c: IR port opened