dmesg when loading nf_conntrack_amanda just after booting

dmesg.out (text/plain), 15.07 KB, created by Carlos Eduardo Santos on 2008-03-23 01:44:08 UTC

has been reserved
system 00:00: ioport range 0x4080-0x40ff has been reserved
system 00:00: ioport range 0x4400-0x447f has been reserved
system 00:00: ioport range 0x4480-0x44ff has been reserved
system 00:00: ioport range 0x4200-0x427f has been reserved
system 00:00: ioport range 0x4280-0x42ff has been reserved
system 00:01: ioport range 0x5000-0x503f has been reserved
system 00:01: ioport range 0x5500-0x553f has been reserved
system 00:02: iomem range 0xf0000-0xf3fff could not be reserved
system 00:02: iomem range 0xf4000-0xf7fff could not be reserved
system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
system 00:02: iomem range 0xfc000-0xfffff could not be reserved
system 00:02: iomem range 0x5fff0000-0x5fffffff could not be reserved
system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:02: iomem range 0x0-0x9ffff could not be reserved
system 00:02: iomem range 0x100000-0x5ffeffff could not be reserved
system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:08.0
  IO window: 9000-afff
  MEM window: df000000-e1ffffff
  PREFETCH window: 70000000-700fffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: dd000000-deffffff
  PREFETCH window: d0000000-d7ffffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
microcode: CPU0 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
fuse init (API version 7.9)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:03:00.0
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 16
[drm] Initialized radeon 1.28.0 20060524 on minor 0
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
radeonfb: PLL min 12000 max 35000
radeonfb: No connector info table detected
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
Switched to high resolution mode on CPU 0
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
Console: switching to colour frame buffer device 80x30
radeonfb (0000:03:00.0): ATI Radeon QD 
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 17
skge 1.13 addr 0xe1000000 irq 17 chip Yukon-Lite rev 7
skge eth0: addr 00:0e:a6:54:60:d6
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:04.0 to 64
forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x20 @ 1, addr 00:0e:a6:42:e3:d4
forcedeth 0000:00:04.0: timirq lnktim desc-v1
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at  PCI slot 0000:00:09.0
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SP1604N, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_sil 0000:01:0b.0: version 2.3
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xe1004000 tf 0xe1004080 irq 19
ata2: SATA max UDMA/100 mmio m512@0xe1004000 tf 0xe10040c0 irq 19
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-6: ST3160023AS, 3.05, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 310)
scsi 0:0:0:0: Direct-Access     ATA      ST3160023AS      3.05 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[e2084000-e20847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 21, io mem 0xe2083000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 18, io mem 0xe2087000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 20, io mem 0xe2082000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usb 2-1: new low speed USB device using ohci_hcd and address 2
ohci1394: fw-host0: SelfID received outside of bus reset sequence
usb 2-1: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800005abc29]
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
usbcore: registered new interface driver hiddev
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS ES 600 FW:29.i3.D USB FW:i3] on usb-0000:00:02.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
ALSA device list:
  No soundcards found.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on hda2
md: hda2 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sda2
md: sda2 does not have a valid v0.90 superblock, not importing!
md: Scanned 8 and added 6 devices.
md: autorun ...
md: considering sda6 ...
md:  adding sda6 ...
md: sda5 has different UUID to sda6
md: sda1 has different UUID to sda6
md:  adding hda6 ...
md: hda5 has different UUID to sda6
md: hda1 has different UUID to sda6
md: created md4
md: bind<hda6>
md: bind<sda6>
md: running: <sda6><hda6>
raid1: raid set md4 active with 2 out of 2 mirrors
md: considering sda5 ...
md:  adding sda5 ...
md: sda1 has different UUID to sda5
md:  adding hda5 ...
md: hda1 has different UUID to sda5
md: created md3
md: bind<hda5>
md: bind<sda5>
md: running: <sda5><hda5>
md3: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sda5
raid0:   comparing sda5(256896) with sda5(256896)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at hda5
raid0:   comparing hda5(256896) with sda5(256896)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 513792 blocks.
raid0 : conf->hash_spacing is 513792 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sda1 ...
md:  adding sda1 ...
md:  adding hda1 ...
md: created md0
md: bind<hda1>
md: bind<sda1>
md: running: <sda1><hda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 296k freed
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 22
cx88[0]: subsystem: 0000:0000, board: PixelView PlayTV Ultra Pro (Stereo) [card=27,insmod option]
cx88[0]: TV tuner type 38, Radio tuner type -1
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: USB GSPCA camera found.(ZC3XX) 
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: [spca5xx_probe:4275] Camera type JPEG 
tveeprom 4-0050: Huh, no eeprom present (err=-121)?
input: cx88 IR (PixelView PlayTV Ultra as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input4
cx88[0]/0: found at 0000:01:0a.0, rev: 5, irq: 22, latency: 32, mmio: 0xe0000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zc3xx_config:603] Find Sensor HV7131B
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120
usbcore: registered new interface driver gspca
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: gspca driver 01.00.20 registered
ReiserFS: md3: found reiserfs format "3.6" with standard journal
ReiserFS: md3: using ordered data mode
ReiserFS: md3: journal params: device md3, size 8192, journal first block 34, max trans len 512, max batch 450, max commit age 30, max trans age 30
ReiserFS: md3: checking transaction log (md3)
ReiserFS: md3: Using r5 hash to sort names
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1574360k swap on /dev/sda2.  Priority:3 extents:1 across:1574360k
Adding 1574360k swap on /dev/hda2.  Priority:3 extents:1 across:1574360k
hda: UDMA/100 mode selected
hdc: UDMA/33 mode selected
hdc: CHECK for good STATUS
skge eth0: enabling interface
skge eth0: Link is up at 100 Mbps, full duplex, flow control both
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:03:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs