smartctl version 5.37 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: HITACHI HTS541616J9SA00 Serial Number: SB2441GJH2YV3U Firmware Version: SB4IC7UP User Capacity: 160 041 885 696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Fri Mar 14 20:28:07 2008 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 83) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 232 232 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 338 5 Reallocated_Sector_Ct 0x0033 096 096 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 1723 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 321 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15 193 Load_Cycle_Count 0x0012 090 090 000 Old_age Always - 103706 194 Temperature_Celsius 0x0002 137 137 000 Old_age Always - 40 (Lifetime Min/Max 16/48) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 308 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 19 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 19 occurred at disk power-on lifetime: 985 hours (41 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 40 9f e0 4a e1 Error: IDNF at LBA = 0x014ae09f = 21684383 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 40 9f e0 4a e1 08 08:41:25.500 WRITE DMA ca 00 08 3f a8 01 e1 08 08:41:25.200 WRITE DMA ca 00 08 3f a5 01 e1 08 08:41:24.700 WRITE DMA ca 00 08 3f a2 01 e1 08 08:41:24.700 WRITE DMA ca 00 08 07 80 01 e1 08 08:41:24.700 WRITE DMA Error 18 occurred at disk power-on lifetime: 985 hours (41 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 89 f6 5a 01 e1 Error: IDNF 137 sectors at LBA = 0x01015af6 = 16866038 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 7f 59 01 e0 08 08:40:35.000 WRITE DMA EXT 35 00 88 b7 3d 01 e0 08 08:40:35.000 WRITE DMA EXT 35 00 00 b7 39 01 e0 08 08:40:33.200 WRITE DMA EXT 27 00 00 00 00 00 e0 08 08:40:33.200 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 08 08:40:33.200 IDENTIFY DEVICE Error 17 occurred at disk power-on lifetime: 985 hours (41 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 d5 e2 36 01 e1 Error: IDNF 213 sectors at LBA = 0x010136e2 = 16856802 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 b7 35 01 e0 08 08:40:29.300 WRITE DMA EXT ca 00 08 af 35 01 e1 08 08:40:29.000 WRITE DMA ca 00 50 b7 51 01 e0 08 08:40:27.800 WRITE DMA ca 00 b8 d2 b6 29 ea 08 08:40:27.600 WRITE DMA ca 00 60 6a b6 29 ea 08 08:40:26.700 WRITE DMA Error 16 occurred at disk power-on lifetime: 985 hours (41 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 b0 22 1e 2a ea Error: IDNF 176 sectors at LBA = 0x0a2a1e22 = 170532386 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 b0 22 1e 2a e0 08 08:40:09.700 WRITE DMA EXT 27 00 00 00 00 00 e0 08 08:40:09.700 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 08 08:40:09.700 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 08:40:09.700 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 08 08:40:09.700 READ NATIVE MAX ADDRESS EXT Error 15 occurred at disk power-on lifetime: 985 hours (41 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 85 9d 1c 2a ea Error: IDNF 133 sectors at LBA = 0x0a2a1c9d = 170531997 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 22 1a 2a e0 08 08:40:03.600 WRITE DMA EXT ca 00 f0 2a 19 2a ea 08 08:40:02.600 WRITE DMA 27 00 00 00 00 00 e0 08 08:40:02.600 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 08 08:40:02.600 IDENTIFY DEVICE ef 03 45 00 00 00 a0 08 08:40:02.600 SET FEATURES [Set transfer mode] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1709 - # 2 Short offline Completed without error 00% 1707 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.