dmesg

dmesg (text/plain), 37.61 KB, created by Robert Golding on 2008-03-14 19:01:46 UTC

Linux version 2.6.24-gentoo-r3 (root@one) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Wed Mar 12 19:27:12 CST 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
 BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
 BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000d0000000 - 00000000d8000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4b60
Entering add_active_range(0, 0, 524272) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   524272
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   524272
On node 0 totalpages: 524272
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2303 pages used for memmap
  HighMem zone: 292593 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F64B0, 0014 (r0 GBT   )
ACPI: RSDT 7FFF3000, 0038 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
ACPI: FACP 7FFF3040, 0074 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
ACPI: DSDT 7FFF30C0, 4B34 (r1 GBT    NVDAACPI     1000 MSFT  100000C)
ACPI: FACS 7FFF0000, 0040
ACPI: SSDT 7FFF7C80, 02CC (r1 PTLTD  POWERNOW        1  LTP        1)
ACPI: HPET 7FFF7F80, 0038 (r1 GBT    NVDAACPI 42302E31 NVDA       98)
ACPI: MCFG 7FFF7FC0, 003C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
ACPI: APIC 7FFF7C00, 007C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfefffc00
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 84000000 (gap: 80000000:30000000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520177
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda2 video=uvesafb:mtrr:3,ywrap,1440x900-32 splash=silent,theme:livecd-2007.0 CONSOLE=/dev/tty1 quiet udev
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c05df000 soft=c05dd000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2812.986 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2064316k/2097088k available (3620k kernel code, 31440k reserved, 1079k data, 244k init, 1179584k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc059d000 - 0xc05da000   ( 244 kB)
      .data : 0xc0489203 - 0xc0596f3c   (1079 kB)
      .text : 0xc0100000 - 0xc0489203   (3620 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5631.52 BogoMIPS (lpj=9381636)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 2000
CPU 1 irqstacks, hard=c05e0000 soft=c05de000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5627.99 BogoMIPS (lpj=9375985)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
Total of 2 processors activated (11259.51 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 2 CPUs
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on device 00:18
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:06.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
ACPI: RTC can wake from S4
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:01: iomem range 0xb0000000-0xbfffffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x295-0x314 has been reserved
system 00:02: ioport range 0x290-0x294 has been reserved
system 00:0a: iomem range 0xd0000000-0xd7ffffff could not be reserved
system 00:0b: iomem range 0xd0000-0xd3fff has been reserved
system 00:0b: iomem range 0xd4800-0xd7fff has been reserved
system 00:0b: iomem range 0xf0000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:06.0
  IO window: 8000-8fff
  MEM window: dc000000-ddffffff
  PREFETCH window: de000000-de0fffff
PCI: Bridge: 0000:00:0f.0
  IO window: 9000-9fff
  MEM window: d8000000-dbffffff
  PREFETCH window: c0000000-cfffffff
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4755k freed
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
squashfs: version 3.3 (2007/10/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/W DEBUG].
fuse init (API version 7.9)
SGI XFS with large block numbers, no debug enabled
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:02:00.0
PCI: Setting latency timer of device 0000:00:0f.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0:pcie00]
Allocate Port Service[0000:00:0f.0:pcie03]
Real Time Clock Driver v1.12ac
uvesafb: NVIDIA Corporation, G86 Board - p403h23 , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: protected mode interface info at c000:b1a0
uvesafb: pmi: set display start = c00cb203, set palette = c00cb25e
uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 140 MHz
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=1800
Console: switching to colour frame buffer device 180x56
uvesafb: framebuffer at 0xd9000000, mapped to 0xf8880000, using 10125k, total 14336k
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
nbd: registered device at major 43
Driver 'sd' needs updating - please use bus_type methods
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 16
ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: HPA detected: current 390719855, native 390721968
ata1.00: ATA-6: WDC WD2000JD-55HBB0, 08.02D08, max UDMA/133
ata1.00: 390719855 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6: WDC WD2000JD-19HBB0, 08.02D08, max UDMA/133
ata2.00: 390721968 sectors, multi 16: LBA48 
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2000JD-55H 08.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access     ATA      WDC WD2000JD-19H 08.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:05.1 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq 17
ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq 17
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: PIONEER DVD-RW  DVR-212, 1.21, max UDMA/66
ata3.00: configured for UDMA/66
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-212  1.21 PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:05.2 to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd800 irq 18
ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xd808 irq 18
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:04.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:04.0 to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata8: port disabled. ignoring.
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10
ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 
ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: supports USB remote wakeup
ehci_hcd 0000:00:02.1: irq 19, io mem 0xde105000
ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.24-gentoo-r3 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.1: port 1 high speed
ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:02.1: port 1 high speed
ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: default language 0x0409
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
drivers/usb/core/inode.c: creating file '002'
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Mass Storage Device
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 058F312D81B
ehci_hcd 0000:00:02.1: GetStatus port 9 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 9, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 9: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.1: port 9 low speed --> companion
ehci_hcd 0000:00:02.1: GetStatus port 9 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0200
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usb-storage 1-1:1.0: usb_probe_interface
usb-storage 1-1:1.0: usb_probe_interface - got id
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos: probe of 00:04 failed with error -16
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Starting balanced_irq
Using IPI No-Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 244k freed
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: created debug files
ohci_hcd 0000:00:02.0: irq 16, io mem 0xde104000
ohci_hcd 0000:00:02.0: OHCI controller state
ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:02.0: intrstatus 0x00000044 RHSC SF
ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH
ohci_hcd 0000:00:02.0: hcca frame #0003
ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00010301 CSC LSDA PPS CCS
ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.24-gentoo-r3 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00010301 CSC LSDA PPS CCS
hub 2-0:1.0: port 9, status 0301, change 0001, 1.5 Mb/s
hub 2-0:1.0: debounce: port 9: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00100303 PRSC LSDA PPS PES CCS
usb 2-9: new low speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00100303 PRSC LSDA PPS PES CCS
usb 2-9: skipped 1 descriptor after interface
usb 2-9: skipped 1 descriptor after interface
usb 2-9: default language 0x0409
usb 2-9: uevent
usb 2-9: usb_probe_device
usb 2-9: configuration #1 chosen from 1 choice
usb 2-9: adding 2-9:1.0 (config #1, interface 0)
usb 2-9:1.0: uevent
usb 2-9: adding 2-9:1.1 (config #1, interface 1)
usb 2-9:1.1: uevent
drivers/usb/core/inode.c: creating file '002'
usb 2-9: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-9: Product: Microsoft Wireless Desktop Receiver 3.1
usb 2-9: Manufacturer: Microsft
hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0200
usbcore: registered new interface driver hiddev
usbhid 2-9:1.0: usb_probe_interface
usbhid 2-9:1.0: usb_probe_interface - got id
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input3
input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:02.0-9
usbhid 2-9:1.1: usb_probe_interface
usbhid 2-9:1.1: usb_probe_interface - got id
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input4
input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:02.0-9
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[dd004000-dd0047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001a4d5600e248b0]
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-9: uevent
usb 2-9:1.0: uevent
usb 2-9:1.1: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-1: uevent
usb 1-1:1.0: uevent
scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
sd 8:0:0:1: [sdd] Attached SCSI removable disk
scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
sd 8:0:0:2: [sde] Attached SCSI removable disk
scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 8:0:0:3: [sdf] Attached SCSI removable disk
usb-storage: device scan complete
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:2: Attached scsi generic sg5 type 0
sd 8:0:0:3: Attached scsi generic sg6 type 0
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 21
Linux video capture interface: v2.00
i2c-core: driver [tveeprom] registered
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
nvidia: module license 'NVIDIA' taints kernel.
scsi9 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec 2940A Ultra SCSI adapter>
        aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs

scsi 9:0:2:0: Processor         HP       C5110A           3701 PQ: 0 ANSI: 2
 target9:0:2: Beginning Domain Validation
 target9:0:2: Ending Domain Validation
scsi 9:0:2:0: Attached scsi generic sg7 type 3
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:4d:80:02:a7
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:06.1 to 64
i2c-adapter i2c-0: adapter [SMBus nForce2 adapter at 1c00] registered
i2c-dev: adapter [SMBus nForce2 adapter at 1c00] registered as minor 0
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 1c80] registered
i2c-dev: adapter [SMBus nForce2 adapter at 1c80] registered as minor 1
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 22
bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 22, latency: 32, mmio: 0xde000000
bttv0: using: Prolink Pixelview PV-BT878P+ (Rev.4C,8E) [card=70,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
i2c-adapter i2c-2: adapter [bt878 #0 [sw]] registered
i2c-dev: adapter [bt878 #0 [sw]] registered as minor 2
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x50
i2c-adapter i2c-2: master_xfer[0] W, addr=0x50, len=0
i2c-adapter i2c-2: NAK from device addr 0x50 msg #0
bttv0: tuner type=25
bttv0: i2c: checking for MSP34xx @ 0x80... <7>i2c-adapter i2c-2: master_xfer[0] R, addr=0x40, len=1
i2c-adapter i2c-2: NAK from device addr 0x40 msg #0
not found
bttv0: i2c: checking for TDA9875 @ 0xb0... <7>i2c-adapter i2c-2: master_xfer[0] R, addr=0x58, len=1
i2c-adapter i2c-2: NAK from device addr 0x58 msg #0
not found
bttv0: i2c: checking for TDA7432 @ 0x8a... <7>i2c-adapter i2c-2: master_xfer[0] R, addr=0x45, len=1
i2c-adapter i2c-2: NAK from device addr 0x45 msg #0
not found
i2c-core: driver [tvaudio] registered
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x41
i2c-adapter i2c-2: master_xfer[0] W, addr=0x41, len=0
i2c-adapter i2c-2: NAK from device addr 0x41 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x40
i2c-adapter i2c-2: master_xfer[0] W, addr=0x40, len=0
i2c-adapter i2c-2: NAK from device addr 0x40 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4c
i2c-adapter i2c-2: master_xfer[0] W, addr=0x4c, len=0
i2c-adapter i2c-2: NAK from device addr 0x4c msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x42
i2c-adapter i2c-2: master_xfer[0] W, addr=0x42, len=0
i2c-adapter i2c-2: NAK from device addr 0x42 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x5a
i2c-adapter i2c-2: master_xfer[0] W, addr=0x5a, len=0
i2c-adapter i2c-2: NAK from device addr 0x5a msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x5b
i2c-adapter i2c-2: master_xfer[0] W, addr=0x5b, len=0
i2c-adapter i2c-2: NAK from device addr 0x5b msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x58
i2c-adapter i2c-2: master_xfer[0] W, addr=0x58, len=0
i2c-adapter i2c-2: NAK from device addr 0x58 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b
i2c-adapter i2c-2: master_xfer[0] W, addr=0x4b, len=0
i2c-adapter i2c-2: NAK from device addr 0x4b msg #0
i2c-core: driver [tuner] registered
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x10
i2c-adapter i2c-2: master_xfer[0] W, addr=0x10, len=0
i2c-adapter i2c-2: NAK from device addr 0x10 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x42
i2c-adapter i2c-2: master_xfer[0] W, addr=0x42, len=0
i2c-adapter i2c-2: NAK from device addr 0x42 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x43
i2c-adapter i2c-2: master_xfer[0] W, addr=0x43, len=0
i2c-adapter i2c-2: NAK from device addr 0x43 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4a
i2c-adapter i2c-2: master_xfer[0] W, addr=0x4a, len=0
i2c-adapter i2c-2: NAK from device addr 0x4a msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b
i2c-adapter i2c-2: master_xfer[0] W, addr=0x4b, len=0
i2c-adapter i2c-2: NAK from device addr 0x4b msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x60
i2c-adapter i2c-2: master_xfer[0] W, addr=0x60, len=0
i2c-adapter i2c-2: NAK from device addr 0x60 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x61
i2c-adapter i2c-2: master_xfer[0] W, addr=0x61, len=0
tuner 2-0061: Setting mode_mask to 0x0e
tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
i2c-adapter i2c-2: client [(tuner unset)] registered with bus id 2-0061
tuner 2-0061: Calling set_type_addr for type=25, addr=0xff, mode=0x0e, config=0xc0306e37
tuner 2-0061: set addr for type -1
tuner 2-0061: defining GPIO callback
tuner-simple 2-0061: type set to 25 (LG PAL_I+FM (TAPC-I001D))
tuner 2-0061: type set to LG PAL_I+FM (TAPC-I
tuner 2-0061: bt878 #0 [sw] tuner I2C addr 0xc2 with type 25 used for 0x0e
tuner 2-0061: defining GPIO callback
tuner-simple 2-0061: type set to 25 (LG PAL_I+FM (TAPC-I001D))
tuner 2-0061: type set to LG PAL_I+FM (TAPC-I
tuner 2-0061: bt878 #0 [sw] tuner I2C addr 0xc2 with type 25 used for 0x0e
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x62
i2c-adapter i2c-2: master_xfer[0] W, addr=0x62, len=0
i2c-adapter i2c-2: NAK from device addr 0x62 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x63
i2c-adapter i2c-2: master_xfer[0] W, addr=0x63, len=0
i2c-adapter i2c-2: NAK from device addr 0x63 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x64
i2c-adapter i2c-2: master_xfer[0] W, addr=0x64, len=0
i2c-adapter i2c-2: NAK from device addr 0x64 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x65
i2c-adapter i2c-2: master_xfer[0] W, addr=0x65, len=0
i2c-adapter i2c-2: NAK from device addr 0x65 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x66
i2c-adapter i2c-2: master_xfer[0] W, addr=0x66, len=0
i2c-adapter i2c-2: NAK from device addr 0x66 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x67
i2c-adapter i2c-2: master_xfer[0] W, addr=0x67, len=0
i2c-adapter i2c-2: NAK from device addr 0x67 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x68
i2c-adapter i2c-2: master_xfer[0] W, addr=0x68, len=0
i2c-adapter i2c-2: NAK from device addr 0x68 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x69
i2c-adapter i2c-2: master_xfer[0] W, addr=0x69, len=0
i2c-adapter i2c-2: NAK from device addr 0x69 msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6a
i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=0
i2c-adapter i2c-2: NAK from device addr 0x6a msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6b
i2c-adapter i2c-2: master_xfer[0] W, addr=0x6b, len=0
i2c-adapter i2c-2: NAK from device addr 0x6b msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6c
i2c-adapter i2c-2: master_xfer[0] W, addr=0x6c, len=0
i2c-adapter i2c-2: NAK from device addr 0x6c msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6d
i2c-adapter i2c-2: master_xfer[0] W, addr=0x6d, len=0
i2c-adapter i2c-2: NAK from device addr 0x6d msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6e
i2c-adapter i2c-2: master_xfer[0] W, addr=0x6e, len=0
i2c-adapter i2c-2: NAK from device addr 0x6e msg #0
i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6f
i2c-adapter i2c-2: master_xfer[0] W, addr=0x6f, len=0
i2c-adapter i2c-2: NAK from device addr 0x6f msg #0
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
tuner 2-0061: Cmd VIDIOC_S_STD accepted for analog TV
tuner 2-0061: switching to v4l2
tuner 2-0061: tv freq set to 400.00
i2c-adapter i2c-2: master_xfer[0] W, addr=0x61, len=4
input: bttv IR (card=70) as /devices/pci0000:00/0000:00:06.0/0000:01:07.0/input/input5
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:01:07.1[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 22
bt878_probe: card id=[0x0], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:01:07.1 disabled
bt878: probe of 0000:01:07.1 failed with error -22
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1951888k swap on /dev/sda4.  Priority:-1 extents:1 across:1951888k