Linux version 2.6.24-gentoo-r3 (root@one) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Wed Mar 12 19:27:12 CST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved) BIOS-e820: 00000000d0000000 - 00000000d8000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4b60 Entering add_active_range(0, 0, 524272) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524272 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 524272 On node 0 totalpages: 524272 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2303 pages used for memmap HighMem zone: 292593 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F64B0, 0014 (r0 GBT ) ACPI: RSDT 7FFF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: FACP 7FFF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: DSDT 7FFF30C0, 4B34 (r1 GBT NVDAACPI 1000 MSFT 100000C) ACPI: FACS 7FFF0000, 0040 ACPI: SSDT 7FFF7C80, 02CC (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET 7FFF7F80, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98) ACPI: MCFG 7FFF7FC0, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: APIC 7FFF7C00, 007C (r1 GBT NVDAACPI 42302E31 NVDA 1010101) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfefffc00 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 84000000 (gap: 80000000:30000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177 Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda2 video=uvesafb:mtrr:3,ywrap,1440x900-32 splash=silent,theme:livecd-2007.0 CONSOLE=/dev/tty1 quiet udev mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c05df000 soft=c05dd000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2812.986 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2064316k/2097088k available (3620k kernel code, 31440k reserved, 1079k data, 244k init, 1179584k highmem) virtual kernel memory layout: fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc059d000 - 0xc05da000 ( 244 kB) .data : 0xc0489203 - 0xc0596f3c (1079 kB) .text : 0xc0100000 - 0xc0489203 (3620 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 5631.52 BogoMIPS (lpj=9381636) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 SMP alternatives: switching to SMP code Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c05e0000 soft=c05de000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5627.99 BogoMIPS (lpj=9375985) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 Total of 2 processors activated (11259.51 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 2 CPUs net_namespace: 64 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on device 00:18 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1400-0x147f has been reserved system 00:01: ioport range 0x1480-0x14ff has been reserved system 00:01: ioport range 0x1800-0x187f has been reserved system 00:01: ioport range 0x1880-0x18ff has been reserved system 00:01: iomem range 0xb0000000-0xbfffffff could not be reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x295-0x314 has been reserved system 00:02: ioport range 0x290-0x294 has been reserved system 00:0a: iomem range 0xd0000000-0xd7ffffff could not be reserved system 00:0b: iomem range 0xd0000-0xd3fff has been reserved system 00:0b: iomem range 0xd4800-0xd7fff has been reserved system 00:0b: iomem range 0xf0000-0xfbfff could not be reserved system 00:0b: iomem range 0xfc000-0xfffff could not be reserved system 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reserved system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:06.0 IO window: 8000-8fff MEM window: dc000000-ddffffff PREFETCH window: de000000-de0fffff PCI: Bridge: 0000:00:0f.0 IO window: 9000-9fff MEM window: d8000000-dbffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 4755k freed Machine check exception polling timer started. highmem bounce pool size: 64 pages squashfs: version 3.3 (2007/10/31) Phillip Lougher NTFS driver 2.1.29 [Flags: R/W DEBUG]. fuse init (API version 7.9) SGI XFS with large block numbers, no debug enabled Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) Boot video device is 0000:02:00.0 PCI: Setting latency timer of device 0000:00:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] Allocate Port Service[0000:00:0f.0:pcie03] Real Time Clock Driver v1.12ac uvesafb: NVIDIA Corporation, G86 Board - p403h23 , Chip Rev , OEM: NVIDIA, VBE v3.0 uvesafb: protected mode interface info at c000:b1a0 uvesafb: pmi: set display start = c00cb203, set palette = c00cb25e uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da uvesafb: VBIOS/hardware supports DDC2 transfers uvesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 140 MHz uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=1800 Console: switching to colour frame buffer device 180x56 uvesafb: framebuffer at 0xd9000000, mapped to 0xf8880000, using 10125k, total 14336k fb0: VESA VGA frame buffer device input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/virtual/input/input1 ACPI: Power Button (CM) [PWRB] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: module loaded nbd: registered device at major 43 Driver 'sd' needs updating - please use bus_type methods sata_nv 0000:00:05.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xa000 ctl 0xa400 bmdma 0xb000 irq 16 ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb008 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: HPA detected: current 390719855, native 390721968 ata1.00: ATA-6: WDC WD2000JD-55HBB0, 08.02D08, max UDMA/133 ata1.00: 390719855 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-6: WDC WD2000JD-19HBB0, 08.02D08, max UDMA/133 ata2.00: 390721968 sectors, multi 16: LBA48 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD2000JD-55H 08.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA WDC WD2000JD-19H 08.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:05.1 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq 17 ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq 17 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER DVD-RW DVR-212, 1.21, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-212 1.21 PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:05.2 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd800 irq 18 ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xd808 irq 18 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:04.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:04.0 to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata8: port disabled. ignoring. ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10 ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park ehci_hcd 0000:00:02.1: park 0 ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: supports USB remote wakeup ehci_hcd 0000:00:02.1: irq 19, io mem 0xde105000 ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.24-gentoo-r3 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:02.1: port 1 high speed ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: new high speed USB device using ehci_hcd and address 2 ehci_hcd 0000:00:02.1: port 1 high speed ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT usb 1-1: default language 0x0409 usb 1-1: uevent usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: uevent drivers/usb/core/inode.c: creating file '002' usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: Mass Storage Device usb 1-1: Manufacturer: Generic usb 1-1: SerialNumber: 058F312D81B ehci_hcd 0000:00:02.1: GetStatus port 9 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 9, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 9: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:02.1: port 9 low speed --> companion ehci_hcd 0000:00:02.1: GetStatus port 9 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0200 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usb-storage 1-1:1.0: usb_probe_interface usb-storage 1-1:1.0: usb_probe_interface - got id scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 rtc_cmos: probe of 00:04 failed with error -16 i2c /dev entries driver i2c-core: driver [dev_driver] registered sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. Starting balanced_irq Using IPI No-Shortcut mode drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 244k freed ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete sd 0:0:0:0: [sda] 390719855 512-byte hardware sectors (200049 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller drivers/usb/core/inode.c: creating file '002' ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: created debug files ohci_hcd 0000:00:02.0: irq 16, io mem 0xde104000 ohci_hcd 0000:00:02.0: OHCI controller state ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:02.0: intrstatus 0x00000044 RHSC SF ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH ohci_hcd 0000:00:02.0: hcca frame #0003 ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10) ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00010301 CSC LSDA PPS CCS ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: trying to enable port power on non-switchable hub hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.24-gentoo-r3 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00010301 CSC LSDA PPS CCS hub 2-0:1.0: port 9, status 0301, change 0001, 1.5 Mb/s hub 2-0:1.0: debounce: port 9: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00100303 PRSC LSDA PPS PES CCS usb 2-9: new low speed USB device using ohci_hcd and address 2 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [8] = 0x00100303 PRSC LSDA PPS PES CCS usb 2-9: skipped 1 descriptor after interface usb 2-9: skipped 1 descriptor after interface usb 2-9: default language 0x0409 usb 2-9: uevent usb 2-9: usb_probe_device usb 2-9: configuration #1 chosen from 1 choice usb 2-9: adding 2-9:1.0 (config #1, interface 0) usb 2-9:1.0: uevent usb 2-9: adding 2-9:1.1 (config #1, interface 1) usb 2-9:1.1: uevent drivers/usb/core/inode.c: creating file '002' usb 2-9: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-9: Product: Microsoft Wireless Desktop Receiver 3.1 usb 2-9: Manufacturer: Microsft hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0200 usbcore: registered new interface driver hiddev usbhid 2-9:1.0: usb_probe_interface usbhid 2-9:1.0: usb_probe_interface - got id input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input3 input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:02.0-9 usbhid 2-9:1.1: usb_probe_interface usbhid 2-9:1.1: usb_probe_interface - got id input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input4 input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:02.0-9 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[dd004000-dd0047ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001a4d5600e248b0] kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb usb2: uevent usb 2-0:1.0: uevent usb 2-9: uevent usb 2-9:1.0: uevent usb 2-9:1.1: uevent usb usb1: uevent usb 1-0:1.0: uevent usb 1-1: uevent usb 1-1:1.0: uevent scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 8:0:0:0: [sdc] Attached SCSI removable disk scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 8:0:0:1: [sdd] Attached SCSI removable disk scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 8:0:0:2: [sde] Attached SCSI removable disk scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 8:0:0:3: [sdf] Attached SCSI removable disk usb-storage: device scan complete Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sr 2:0:0:0: Attached scsi generic sg2 type 5 sd 8:0:0:0: Attached scsi generic sg3 type 0 sd 8:0:0:1: Attached scsi generic sg4 type 0 sd 8:0:0:2: Attached scsi generic sg5 type 0 sd 8:0:0:3: Attached scsi generic sg6 type 0 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 21 Linux video capture interface: v2.00 i2c-core: driver [tveeprom] registered parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture nvidia: module license 'NVIDIA' taints kernel. scsi9 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs scsi 9:0:2:0: Processor HP C5110A 3701 PQ: 0 ANSI: 2 target9:0:2: Beginning Domain Validation target9:0:2: Ending Domain Validation scsi 9:0:2:0: Attached scsi generic sg7 type 3 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:08.0 to 64 forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:4d:80:02:a7 forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:06.1 to 64 i2c-adapter i2c-0: adapter [SMBus nForce2 adapter at 1c00] registered i2c-dev: adapter [SMBus nForce2 adapter at 1c00] registered as minor 0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c-adapter i2c-1: adapter [SMBus nForce2 adapter at 1c80] registered i2c-dev: adapter [SMBus nForce2 adapter at 1c80] registered as minor 1 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 22 bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 22, latency: 32, mmio: 0xde000000 bttv0: using: Prolink Pixelview PV-BT878P+ (Rev.4C,8E) [card=70,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] i2c-adapter i2c-2: adapter [bt878 #0 [sw]] registered i2c-dev: adapter [bt878 #0 [sw]] registered as minor 2 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x50 i2c-adapter i2c-2: master_xfer[0] W, addr=0x50, len=0 i2c-adapter i2c-2: NAK from device addr 0x50 msg #0 bttv0: tuner type=25 bttv0: i2c: checking for MSP34xx @ 0x80... <7>i2c-adapter i2c-2: master_xfer[0] R, addr=0x40, len=1 i2c-adapter i2c-2: NAK from device addr 0x40 msg #0 not found bttv0: i2c: checking for TDA9875 @ 0xb0... <7>i2c-adapter i2c-2: master_xfer[0] R, addr=0x58, len=1 i2c-adapter i2c-2: NAK from device addr 0x58 msg #0 not found bttv0: i2c: checking for TDA7432 @ 0x8a... <7>i2c-adapter i2c-2: master_xfer[0] R, addr=0x45, len=1 i2c-adapter i2c-2: NAK from device addr 0x45 msg #0 not found i2c-core: driver [tvaudio] registered i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x41 i2c-adapter i2c-2: master_xfer[0] W, addr=0x41, len=0 i2c-adapter i2c-2: NAK from device addr 0x41 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x40 i2c-adapter i2c-2: master_xfer[0] W, addr=0x40, len=0 i2c-adapter i2c-2: NAK from device addr 0x40 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4c i2c-adapter i2c-2: master_xfer[0] W, addr=0x4c, len=0 i2c-adapter i2c-2: NAK from device addr 0x4c msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x42 i2c-adapter i2c-2: master_xfer[0] W, addr=0x42, len=0 i2c-adapter i2c-2: NAK from device addr 0x42 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x5a i2c-adapter i2c-2: master_xfer[0] W, addr=0x5a, len=0 i2c-adapter i2c-2: NAK from device addr 0x5a msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x5b i2c-adapter i2c-2: master_xfer[0] W, addr=0x5b, len=0 i2c-adapter i2c-2: NAK from device addr 0x5b msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x58 i2c-adapter i2c-2: master_xfer[0] W, addr=0x58, len=0 i2c-adapter i2c-2: NAK from device addr 0x58 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b i2c-adapter i2c-2: master_xfer[0] W, addr=0x4b, len=0 i2c-adapter i2c-2: NAK from device addr 0x4b msg #0 i2c-core: driver [tuner] registered i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x10 i2c-adapter i2c-2: master_xfer[0] W, addr=0x10, len=0 i2c-adapter i2c-2: NAK from device addr 0x10 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x42 i2c-adapter i2c-2: master_xfer[0] W, addr=0x42, len=0 i2c-adapter i2c-2: NAK from device addr 0x42 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x43 i2c-adapter i2c-2: master_xfer[0] W, addr=0x43, len=0 i2c-adapter i2c-2: NAK from device addr 0x43 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4a i2c-adapter i2c-2: master_xfer[0] W, addr=0x4a, len=0 i2c-adapter i2c-2: NAK from device addr 0x4a msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x4b i2c-adapter i2c-2: master_xfer[0] W, addr=0x4b, len=0 i2c-adapter i2c-2: NAK from device addr 0x4b msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x60 i2c-adapter i2c-2: master_xfer[0] W, addr=0x60, len=0 i2c-adapter i2c-2: NAK from device addr 0x60 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x61 i2c-adapter i2c-2: master_xfer[0] W, addr=0x61, len=0 tuner 2-0061: Setting mode_mask to 0x0e tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw]) i2c-adapter i2c-2: client [(tuner unset)] registered with bus id 2-0061 tuner 2-0061: Calling set_type_addr for type=25, addr=0xff, mode=0x0e, config=0xc0306e37 tuner 2-0061: set addr for type -1 tuner 2-0061: defining GPIO callback tuner-simple 2-0061: type set to 25 (LG PAL_I+FM (TAPC-I001D)) tuner 2-0061: type set to LG PAL_I+FM (TAPC-I tuner 2-0061: bt878 #0 [sw] tuner I2C addr 0xc2 with type 25 used for 0x0e tuner 2-0061: defining GPIO callback tuner-simple 2-0061: type set to 25 (LG PAL_I+FM (TAPC-I001D)) tuner 2-0061: type set to LG PAL_I+FM (TAPC-I tuner 2-0061: bt878 #0 [sw] tuner I2C addr 0xc2 with type 25 used for 0x0e i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x62 i2c-adapter i2c-2: master_xfer[0] W, addr=0x62, len=0 i2c-adapter i2c-2: NAK from device addr 0x62 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x63 i2c-adapter i2c-2: master_xfer[0] W, addr=0x63, len=0 i2c-adapter i2c-2: NAK from device addr 0x63 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x64 i2c-adapter i2c-2: master_xfer[0] W, addr=0x64, len=0 i2c-adapter i2c-2: NAK from device addr 0x64 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x65 i2c-adapter i2c-2: master_xfer[0] W, addr=0x65, len=0 i2c-adapter i2c-2: NAK from device addr 0x65 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x66 i2c-adapter i2c-2: master_xfer[0] W, addr=0x66, len=0 i2c-adapter i2c-2: NAK from device addr 0x66 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x67 i2c-adapter i2c-2: master_xfer[0] W, addr=0x67, len=0 i2c-adapter i2c-2: NAK from device addr 0x67 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x68 i2c-adapter i2c-2: master_xfer[0] W, addr=0x68, len=0 i2c-adapter i2c-2: NAK from device addr 0x68 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x69 i2c-adapter i2c-2: master_xfer[0] W, addr=0x69, len=0 i2c-adapter i2c-2: NAK from device addr 0x69 msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6a i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=0 i2c-adapter i2c-2: NAK from device addr 0x6a msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6b i2c-adapter i2c-2: master_xfer[0] W, addr=0x6b, len=0 i2c-adapter i2c-2: NAK from device addr 0x6b msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6c i2c-adapter i2c-2: master_xfer[0] W, addr=0x6c, len=0 i2c-adapter i2c-2: NAK from device addr 0x6c msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6d i2c-adapter i2c-2: master_xfer[0] W, addr=0x6d, len=0 i2c-adapter i2c-2: NAK from device addr 0x6d msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6e i2c-adapter i2c-2: master_xfer[0] W, addr=0x6e, len=0 i2c-adapter i2c-2: NAK from device addr 0x6e msg #0 i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x6f i2c-adapter i2c-2: master_xfer[0] W, addr=0x6f, len=0 i2c-adapter i2c-2: NAK from device addr 0x6f msg #0 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok tuner 2-0061: Cmd VIDIOC_S_STD accepted for analog TV tuner 2-0061: switching to v4l2 tuner 2-0061: tv freq set to 400.00 i2c-adapter i2c-2: master_xfer[0] W, addr=0x61, len=4 input: bttv IR (card=70) as /devices/pci0000:00/0000:00:06.0/0000:01:07.0/input/input5 ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:02:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:01:07.1[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 22 bt878_probe: card id=[0x0], Unknown card. Exiting.. ACPI: PCI interrupt for device 0000:01:07.1 disabled bt878: probe of 0000:01:07.1 failed with error -22 EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1951888k swap on /dev/sda4. Priority:-1 extents:1 across:1951888k