vailable. found SMP MP-table at 000f64c0 Entering add_active_range(0, 0, 245424) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 245424 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 245424 On node 0 totalpages: 245424 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 125 pages used for memmap HighMem zone: 15923 pages, LIFO batch:3 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F6490, 0014 (r0 PTLTD ) ACPI: RSDT 3BEB3B81, 0038 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 3BEB7EEC, 0074 (r1 VN800 FIC_LM7R 6040000 PTL_ F4240) ACPI: DSDT 3BEB3F3D, 3FAF (r1 FIC LM7R 6040000 MSFT 100000E) ACPI: FACS 3BEB8FC0, 0040 ACPI: APIC 3BEB7F60, 0050 (r1 PTLTD APIC 6040000 LTP 0) ACPI: APIC 3BEB7FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) ACPI: SSDT 3BEB3DAD, 0190 (r1 PmRef Cpu0Cst 3001 INTL 20030224) ACPI: SSDT 3BEB3BB9, 01F4 (r1 PmRef CpuPm 3000 INTL 20030224) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:9 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level) ACPI: IRQ0 used by override. ACPI: IRQ10 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) Built 1 zonelists in Zone order. Total pages: 243507 Kernel command line: auto BOOT_IMAGE=2.6.23-g2 ro root=807 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c03bc000 soft=c03bb000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1496.358 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 969636k/981696k available (1940k kernel code, 11512k reserved, 650k data, 188k init, 64192k highmem) virtual kernel memory layout: fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0389000 - 0xc03b8000 ( 188 kB) .data : 0xc02e5258 - 0xc0387dc4 ( 650 kB) .text : 0xc0100000 - 0xc02e5258 (1940 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2994.69 BogoMIPS (lpj=1497345) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00002040 00000180 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05 Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 ACPI: Table DSDT replaced by host OS ACPI: DSDT 00000000, 39E8 (r1 FIC LM7R 6040000 INTL 20061109) ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"Parsing all Control Methods: Table [DSDT](id 0001) - 393 Objects with 44 Devices 142 Methods 14 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 4 Objects with 0 Devices 1 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 10 Objects with 0 Devices 3 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8ec, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 5 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:.......................................................... Initialized 12/14 Regions 0/0 Fields 22/22 Buffers 24/27 Packages (416 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:.. Executed 2 _INI methods requiring 1 _STA executions (examined 48 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 9 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 9 10 11 12) *8 ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Time: tsc clocksource has been installed. pnp: 00:05: iomem range 0x0-0x9ffff could not be reserved pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:06: ioport range 0xfe10-0xfe11 has been reserved pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d1000000-d1ffffff PREFETCH window: f0000000-f3ffffff PCI: Bus 2, cardbus bridge: 0000:00:0c.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 50000000-53ffffff MEM window: 54000000-57ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered highmem bounce pool size: 64 pages io scheduler noop registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected. Disabling DAC. PCI: Bypassing VIA 8237 APIC De-Assert Message Boot video device is 0000:01:00.0 Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize sata_via 0000:00:0f.0: version 2.3 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17 sata_via 0000:00:0f.0: routed to hard irq line 9 sata_via 0000:00:0f.0: enabling SATA channels (0x42) scsi0 : sata_via scsi1 : sata_via ata1: SATA max UDMA/133 cmd 0x00011430 ctl 0x00011426 bmdma 0x00011400 irq 17 ata2: SATA max UDMA/133 cmd 0x00011428 ctl 0x00011422 bmdma 0x00011408 irq 17 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHV2100BH, 00000029, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 Switched to high resolution mode on CPU 0 ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 pata_via 0000:00:0f.1: version 0.3.2 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17 scsi2 : pata_via scsi3 : pata_via ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011410 irq 14 ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011418 irq 15 ata3: port disabled. ignoring. ata4.00: ATAPI: TSSTcorpCD/DVDW SN-S082D, SS03, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode input: PS/2 Mouse as /devices/virtual/input/input1 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 188k freed via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18 eth0: VIA Rhine II at 0xd0002400, 00:40:ca:e0:e3:22, IRQ 18. eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. Linux agpgart interface v0.102 ACPI: AC Adapter [ACAD] (on-line) input: Power Button (FF) as /devices/virtual/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/virtual/input/input4 ACPI: Power Button (CM) [PWRB] input: Lid Switch as /devices/virtual/input/input5 ACPI: Lid Switch [LID] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (42 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 19, io base 0x00001440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: Transitioning device [FAN] to D3 ACPI: Transitioning device [FAN] to D3 ACPI: Fan [FAN] (off) Yenta: CardBus bridge found at 0000:00:0c.0 [1524:1410] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0c.0, mfunc 0x01021002, devctl 0x44 Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. Yenta: ISA IRQ mask 0x02d0, PCI irq 16 Socket status: 30000006 agpgart: Detected VIA VT3314 chipset agpgart: AGP aperture is 256M @ 0xe0000000 ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 19, io base 0x00001460 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: Battery Slot [BAT0] (battery present) PCI: Enabling device 0000:00:11.5 (0000 -> 0001) ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:11.5 to 64 PCI: Enabling device 0000:00:11.6 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:11.6 to 64 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 19 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:10.4: irq 19, io mem 0xd0002000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected EXT3 FS on sda7, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.8) Adding 1004020k swap on /dev/sda6. Priority:-1 extents:1 across:1004020k eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 [drm] Initialized via 2.11.1 20070202 on minor 0 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode