dmesg

p3Qrzx16.txt (text/plain), 24.46 KB, created by Andrew Gaffney (RETIRED) on 2007-11-06 21:19:27 UTC

Linux version 2.6.23-gentoo (root@kagome) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Fri Nov 2 12:32:00 UTC 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002fef0000 (usable)
 BIOS-e820: 000000002fef0000 - 000000002feff000 (ACPI data)
 BIOS-e820: 000000002feff000 - 000000002ff00000 (ACPI NVS)
 BIOS-e820: 000000002ff00000 - 0000000030000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
768MB LOWMEM available.
found SMP MP-table at 000f6ce0
Entering add_active_range(0, 0, 196608) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   196608
  HighMem    196608 ->   196608
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   196608
On node 0 totalpages: 196608
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1504 pages used for memmap
  Normal zone: 191008 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F6C70, 0014 (r0 PTLTD )
ACPI: RSDT 2FEFAB66, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
ACPI: FACP 2FEFEF06, 0074 (r1 INTEL  440BX     6040000 PTL     F4240)
ACPI: DSDT 2FEFAB96, 4370 (r1 PTLTD  Custom    6040000 MSFT  100000D)
ACPI: FACS 2FEFFFC0, 0040
ACPI: APIC 2FEFEF7A, 005E (r1 PTLTD  	 APIC    6040000  LTP        0)
ACPI: BOOT 2FEFEFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Built 1 zonelists in Zone order.  Total pages: 195072
Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz BOOT_IMAGE=gentoo 
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1999.751 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 769908k/786432k available (2549k kernel code, 15896k reserved, 650k data, 244k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
      .init : 0xc0426000 - 0xc0463000   ( 244 kB)
      .data : 0xc037d58b - 0xc041fe44   ( 650 kB)
      .text : 0xc0100000 - 0xc037d58b   (2549 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4025.86 BogoMIPS (lpj=20129342)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: AMD Opteron(tm) Processor 246 stepping 01
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4015.11 BogoMIPS (lpj=20075582)
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
CPU1: AMD Opteron(tm) Processor 246 stepping 01
Total of 2 processors activated (8040.98 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 2 CPUs
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5150k freed
Simple Boot Flag at 0x36 set to 0x1
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler deadline registered (default)
Limiting direct PCI/PCI transfers.
Boot video device is 0000:00:0f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide1...
hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 1X CD-ROM drive, 32kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Freeing unused kernel memory: 244k freed
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
libata version 2.21 loaded.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [e-mail]
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  1902.800 MB/sec
xor: using function: pIII_sse (1902.800 MB/sec)
async_tx: api initialized (sync-only)
raid6: int32x1    219 MB/s
raid6: int32x2    255 MB/s
raid6: int32x4    271 MB/s
raid6: int32x8    188 MB/s
raid6: mmxx1      452 MB/s
raid6: mmxx2      853 MB/s
raid6: sse1x1     186 MB/s
raid6: sse1x2     350 MB/s
raid6: sse2x1     344 MB/s
raid6: sse2x2     503 MB/s
raid6: using algorithm sse2x2 (503 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 6058, nTxLock = 48467
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Real Time Clock Driver v1.12ac
pcnet32.c:v1.33 27.Jun.2006 [e-mail]
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 16
pcnet32: PCnet/PCI II 79C970A at 0x1080, 00 0c 29 42 b7 e3 assigned IRQ 16.
eth0: registered as PCnet/PCI II 79C970A
pcnet32: 1 cards_found.
Floppy drive(s): fd0 is 1.44M
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <[e-mail]>
FDC 0 is a post-1991 82077
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x1060, IRQ Channel: 17/Level
scsi0:   PCI Bus: 0, Device: 16, Address: 0xEC800000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi0 : BusLogic BT-958
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
scsi 0:0:0:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:1:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:2:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:3:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:4:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:5:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:6:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:8:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:9:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:10:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:11:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:12:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:13:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:14:0: Direct-Access                                    PQ: 0 ANSI: 0
scsi scan: INQUIRY result too short (5), using 36
scsi 0:0:15:0: Direct-Access                                    PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 16777216 512-byte hardware sectors (8590 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
sd 0:0:0:0: [sda] Cache data unavailable
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 16777216 512-byte hardware sectors (8590 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00
sd 0:0:0:0: [sda] Cache data unavailable
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi0: *** BusLogic BT-958 Initialized Successfully ***
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: scsi: Device offlined - not ready after error recovery
sd 0:0:1:0: rejecting I/O to offline device
sd 0:0:1:0: rejecting I/O to offline device
sd 0:0:1:0: [sdb] READ CAPACITY failed
sd 0:0:1:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:1:0: [sdb] Sense not available.
sd 0:0:1:0: rejecting I/O to offline device
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 00 00 00
sd 0:0:1:0: rejecting I/O to offline device
sd 0:0:1:0: [sdb] Asking for cache data failed
sd 0:0:1:0: [sdb] Assuming drive cache: write through
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:2:0: scsi: Device offlined - not ready after error recovery
sd 0:0:2:0: rejecting I/O to offline device
sd 0:0:2:0: rejecting I/O to offline device
sd 0:0:2:0: [sdc] READ CAPACITY failed
sd 0:0:2:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:2:0: [sdc] Sense not available.
sd 0:0:2:0: rejecting I/O to offline device
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 00 00 00 00
sd 0:0:2:0: rejecting I/O to offline device
sd 0:0:2:0: [sdc] Asking for cache data failed
sd 0:0:2:0: [sdc] Assuming drive cache: write through
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:2:0: Attached scsi generic sg2 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:3:0: scsi: Device offlined - not ready after error recovery
sd 0:0:3:0: rejecting I/O to offline device
sd 0:0:3:0: rejecting I/O to offline device
sd 0:0:3:0: [sdd] READ CAPACITY failed
sd 0:0:3:0: [sdd] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:3:0: [sdd] Sense not available.
sd 0:0:3:0: rejecting I/O to offline device
sd 0:0:3:0: [sdd] Write Protect is off
sd 0:0:3:0: [sdd] Mode Sense: 00 00 00 00
sd 0:0:3:0: rejecting I/O to offline device
sd 0:0:3:0: [sdd] Asking for cache data failed
sd 0:0:3:0: [sdd] Assuming drive cache: write through
sd 0:0:3:0: [sdd] Attached SCSI disk
sd 0:0:3:0: Attached scsi generic sg3 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:4:0: scsi: Device offlined - not ready after error recovery
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: [sde] READ CAPACITY failed
sd 0:0:4:0: [sde] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:4:0: [sde] Sense not available.
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: [sde] Write Protect is off
sd 0:0:4:0: [sde] Mode Sense: 00 00 00 00
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: [sde] Asking for cache data failed
sd 0:0:4:0: [sde] Assuming drive cache: write through
sd 0:0:4:0: [sde] Attached SCSI disk
sd 0:0:4:0: Attached scsi generic sg4 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:5:0: scsi: Device offlined - not ready after error recovery
sd 0:0:5:0: rejecting I/O to offline device
sd 0:0:5:0: rejecting I/O to offline device
sd 0:0:5:0: [sdf] READ CAPACITY failed
sd 0:0:5:0: [sdf] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:5:0: [sdf] Sense not available.
sd 0:0:5:0: rejecting I/O to offline device
sd 0:0:5:0: [sdf] Write Protect is off
sd 0:0:5:0: [sdf] Mode Sense: 00 00 00 00
sd 0:0:5:0: rejecting I/O to offline device
sd 0:0:5:0: [sdf] Asking for cache data failed
sd 0:0:5:0: [sdf] Assuming drive cache: write through
sd 0:0:5:0: [sdf] Attached SCSI disk
sd 0:0:5:0: Attached scsi generic sg5 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
hdc: selected mode 0x42
sd 0:0:6:0: scsi: Device offlined - not ready after error recovery
sd 0:0:6:0: rejecting I/O to offline device
sd 0:0:6:0: rejecting I/O to offline device
sd 0:0:6:0: [sdg] READ CAPACITY failed
sd 0:0:6:0: [sdg] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:6:0: [sdg] Sense not available.
sd 0:0:6:0: rejecting I/O to offline device
sd 0:0:6:0: [sdg] Write Protect is off
sd 0:0:6:0: [sdg] Mode Sense: 00 00 00 00
sd 0:0:6:0: rejecting I/O to offline device
sd 0:0:6:0: [sdg] Asking for cache data failed
sd 0:0:6:0: [sdg] Assuming drive cache: write through
sd 0:0:6:0: [sdg] Attached SCSI disk
sd 0:0:6:0: Attached scsi generic sg6 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:8:0: scsi: Device offlined - not ready after error recovery
sd 0:0:8:0: rejecting I/O to offline device
sd 0:0:8:0: rejecting I/O to offline device
sd 0:0:8:0: [sdh] READ CAPACITY failed
sd 0:0:8:0: [sdh] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:8:0: [sdh] Sense not available.
sd 0:0:8:0: rejecting I/O to offline device
sd 0:0:8:0: [sdh] Write Protect is off
sd 0:0:8:0: [sdh] Mode Sense: 00 00 00 00
sd 0:0:8:0: rejecting I/O to offline device
sd 0:0:8:0: [sdh] Asking for cache data failed
sd 0:0:8:0: [sdh] Assuming drive cache: write through
sd 0:0:8:0: [sdh] Attached SCSI disk
sd 0:0:8:0: Attached scsi generic sg7 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:9:0: scsi: Device offlined - not ready after error recovery
sd 0:0:9:0: rejecting I/O to offline device
sd 0:0:9:0: rejecting I/O to offline device
sd 0:0:9:0: [sdi] READ CAPACITY failed
sd 0:0:9:0: [sdi] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:9:0: [sdi] Sense not available.
sd 0:0:9:0: rejecting I/O to offline device
sd 0:0:9:0: [sdi] Write Protect is off
sd 0:0:9:0: [sdi] Mode Sense: 00 00 00 00
sd 0:0:9:0: rejecting I/O to offline device
sd 0:0:9:0: [sdi] Asking for cache data failed
sd 0:0:9:0: [sdi] Assuming drive cache: write through
sd 0:0:9:0: [sdi] Attached SCSI disk
sd 0:0:9:0: Attached scsi generic sg8 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:10:0: scsi: Device offlined - not ready after error recovery
sd 0:0:10:0: rejecting I/O to offline device
sd 0:0:10:0: rejecting I/O to offline device
sd 0:0:10:0: [sdj] READ CAPACITY failed
sd 0:0:10:0: [sdj] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:10:0: [sdj] Sense not available.
sd 0:0:10:0: rejecting I/O to offline device
sd 0:0:10:0: [sdj] Write Protect is off
sd 0:0:10:0: [sdj] Mode Sense: 00 00 00 00
sd 0:0:10:0: rejecting I/O to offline device
sd 0:0:10:0: [sdj] Asking for cache data failed
sd 0:0:10:0: [sdj] Assuming drive cache: write through
sd 0:0:10:0: [sdj] Attached SCSI disk
sd 0:0:10:0: Attached scsi generic sg9 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
eth0: link up
sd 0:0:11:0: scsi: Device offlined - not ready after error recovery
sd 0:0:11:0: rejecting I/O to offline device
sd 0:0:11:0: rejecting I/O to offline device
sd 0:0:11:0: [sdk] READ CAPACITY failed
sd 0:0:11:0: [sdk] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:11:0: [sdk] Sense not available.
sd 0:0:11:0: rejecting I/O to offline device
sd 0:0:11:0: [sdk] Write Protect is off
sd 0:0:11:0: [sdk] Mode Sense: 00 00 00 00
sd 0:0:11:0: rejecting I/O to offline device
sd 0:0:11:0: [sdk] Asking for cache data failed
sd 0:0:11:0: [sdk] Assuming drive cache: write through
sd 0:0:11:0: [sdk] Attached SCSI disk
sd 0:0:11:0: Attached scsi generic sg10 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:12:0: scsi: Device offlined - not ready after error recovery
sd 0:0:12:0: rejecting I/O to offline device
sd 0:0:12:0: rejecting I/O to offline device
sd 0:0:12:0: [sdl] READ CAPACITY failed
sd 0:0:12:0: [sdl] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:12:0: [sdl] Sense not available.
sd 0:0:12:0: rejecting I/O to offline device
sd 0:0:12:0: [sdl] Write Protect is off
sd 0:0:12:0: [sdl] Mode Sense: 00 00 00 00
sd 0:0:12:0: rejecting I/O to offline device
sd 0:0:12:0: [sdl] Asking for cache data failed
sd 0:0:12:0: [sdl] Assuming drive cache: write through
sd 0:0:12:0: [sdl] Attached SCSI disk
sd 0:0:12:0: Attached scsi generic sg11 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
sd 0:0:13:0: scsi: Device offlined - not ready after error recovery
sd 0:0:13:0: rejecting I/O to offline device
sd 0:0:13:0: rejecting I/O to offline device
sd 0:0:13:0: [sdm] READ CAPACITY failed
sd 0:0:13:0: [sdm] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:13:0: [sdm] Sense not available.
sd 0:0:13:0: rejecting I/O to offline device
sd 0:0:13:0: [sdm] Write Protect is off
sd 0:0:13:0: [sdm] Mode Sense: 00 00 00 00
sd 0:0:13:0: rejecting I/O to offline device
sd 0:0:13:0: [sdm] Asking for cache data failed
sd 0:0:13:0: [sdm] Assuming drive cache: write through
sd 0:0:13:0: [sdm] Attached SCSI disk
sd 0:0:13:0: Attached scsi generic sg12 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
eth0: no IPv6 routers present
sd 0:0:14:0: scsi: Device offlined - not ready after error recovery
sd 0:0:14:0: rejecting I/O to offline device
sd 0:0:14:0: rejecting I/O to offline device
sd 0:0:14:0: [sdn] READ CAPACITY failed
sd 0:0:14:0: [sdn] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:14:0: [sdn] Sense not available.
sd 0:0:14:0: rejecting I/O to offline device
sd 0:0:14:0: [sdn] Write Protect is off
sd 0:0:14:0: [sdn] Mode Sense: 00 00 00 00
sd 0:0:14:0: rejecting I/O to offline device
sd 0:0:14:0: [sdn] Asking for cache data failed
sd 0:0:14:0: [sdn] Assuming drive cache: write through
sd 0:0:14:0: [sdn] Attached SCSI disk
sd 0:0:14:0: Attached scsi generic sg13 type 0
scsi0: *** BusLogic BT-958 Initialized Successfully ***
sd 0:0:15:0: scsi: Device offlined - not ready after error recovery
sd 0:0:15:0: rejecting I/O to offline device
sd 0:0:15:0: rejecting I/O to offline device
sd 0:0:15:0: [sdo] READ CAPACITY failed
sd 0:0:15:0: [sdo] Result: hostbyte=0x01 driverbyte=0x00
sd 0:0:15:0: [sdo] Sense not available.
sd 0:0:15:0: rejecting I/O to offline device
sd 0:0:15:0: [sdo] Write Protect is off
sd 0:0:15:0: [sdo] Mode Sense: 00 00 00 00
sd 0:0:15:0: rejecting I/O to offline device
sd 0:0:15:0: [sdo] Asking for cache data failed
sd 0:0:15:0: [sdo] Assuming drive cache: write through
sd 0:0:15:0: [sdo] Attached SCSI disk
sd 0:0:15:0: Attached scsi generic sg14 type 0