Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 133573 Details for
Bug 195673
thinkpad-acpi module does not correctly detect a Lenovo hotkey layout
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
dmesg output
dmesg.txt (text/plain), 28.60 KB, created by
Christopher Smith
on 2007-10-15 22:48:57 UTC
(
hide
)
Description:
dmesg output
Filename:
MIME Type:
Creator:
Christopher Smith
Created:
2007-10-15 22:48:57 UTC
Size:
28.60 KB
patch
obsolete
>Linux version 2.6.23-gentoo (root@kickback) (gcc version 4.1.2 (Gentoo 4.1.2-r1, pie-9.0.7)) #5 SMP PREEMPT Mon Oct 15 17:14:30 EDT 2007 >Command line: root=/dev/sda4 video=intelfb:vram=8,mode=1400x1050-16@75,accel noexec=on noexec32=on >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) > BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) > BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data) > BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS) > BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) >Entering add_active_range(0, 0, 159) 0 entries of 256 used >Entering add_active_range(0, 256, 521936) 1 entries of 256 used >end_pfn_map = 1048576 >DMI present. >ACPI: RSDP 000F67D0, 0024 (r2 LENOVO) >ACPI: XSDT 7F6D1308, 008C (r1 LENOVO TP-79 2090 LTP 0) >ACPI: FACP 7F6D1400, 00F4 (r3 LENOVO TP-79 2090 LNVO 1) >ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] >ACPI: DSDT 7F6D175E, D481 (r1 LENOVO TP-79 2090 MSFT 100000E) >ACPI: FACS 7F6F4000, 0040 >ACPI: SSDT 7F6D15B4, 01AA (r1 LENOVO TP-79 2090 MSFT 100000E) >ACPI: ECDT 7F6DEBDF, 0052 (r1 LENOVO TP-79 2090 LNVO 1) >ACPI: TCPA 7F6DEC31, 0032 (r2 LENOVO TP-79 2090 LNVO 1) >ACPI: APIC 7F6DEC63, 0068 (r1 LENOVO TP-79 2090 LNVO 1) >ACPI: MCFG 7F6DECCB, 003C (r1 LENOVO TP-79 2090 LNVO 1) >ACPI: HPET 7F6DED07, 0038 (r1 LENOVO TP-79 2090 LNVO 1) >ACPI: SLIC 7F6DEE62, 0176 (r1 LENOVO TP-79 2090 LTP 0) >ACPI: BOOT 7F6DEFD8, 0028 (r1 LENOVO TP-79 2090 LTP 1) >ACPI: SSDT 7F6F2655, 025F (r1 LENOVO TP-79 2090 INTL 20050513) >ACPI: SSDT 7F6F28B4, 00A6 (r1 LENOVO TP-79 2090 INTL 20050513) >ACPI: SSDT 7F6F295A, 04F7 (r1 LENOVO TP-79 2090 INTL 20050513) >ACPI: SSDT 7F6F2E51, 01D8 (r1 LENOVO TP-79 2090 INTL 20050513) >Entering add_active_range(0, 0, 159) 0 entries of 256 used >Entering add_active_range(0, 256, 521936) 1 entries of 256 used >Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 >Movable zone start PFN for each node >early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 521936 >On node 0 totalpages: 521839 > DMA zone: 56 pages used for memmap > DMA zone: 2208 pages reserved > DMA zone: 1735 pages, LIFO batch:0 > DMA32 zone: 7079 pages used for memmap > DMA32 zone: 510761 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap >ACPI: PM-Timer IO Port: 0x1008 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >Processor #0 (Bootup-CPU) >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >Processor #1 >ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Setting APIC routing to flat >ACPI: HPET id: 0x8086a201 base: 0xfed00000 >Using ACPI (MADT) for SMP configuration information >swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 >swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 >swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 >swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 >swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 >Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) >SMP: Allowing 2 CPUs, 0 hotplug CPUs >PERCPU: Allocating 34792 bytes of per cpu data >Built 1 zonelists in Zone order. Total pages: 512496 >Kernel command line: root=/dev/sda4 video=intelfb:vram=8,mode=1400x1050-16@75,accel noexec=on noexec32=on >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 32768 bytes) >Extended CMOS year: 2000 >Marking TSC unstable due to TSCs unsynchronized >time.c: Detected 1662.500 MHz processor. >Console: colour VGA+ 80x25 >console [tty0] enabled >Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >Checking aperture... >Memory: 2046200k/2087744k available (4770k kernel code, 40888k reserved, 1766k data, 268k init) >SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 >Calibrating delay using timer specific routine.. 3328.89 BogoMIPS (lpj=6657782) >Security Framework v1.0.0 initialized >Mount-cache hash table entries: 256 >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 2048K >using mwait in idle threads. >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 0 >CPU0: Thermal monitoring enabled (TM2) >SMP alternatives: switching to UP code >ACPI: Core revision 20070126 >Parsing all Control Methods: >Table [DSDT](id 0001) - 1629 Objects with 76 Devices 441 Methods 27 Regions >Parsing all Control Methods: >Table [SSDT](id 0002) - 11 Objects with 0 Devices 7 Methods 0 Regions >Parsing all Control Methods: >Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions >Parsing all Control Methods: >Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions >Parsing all Control Methods: >Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions >Parsing all Control Methods: >Table [SSDT](id 0006) - 14 Objects with 1 Devices 2 Methods 0 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired >evxfevnt-0091 [00] enable : Transition to ACPI mode successful >Using local APIC timer interrupts. >result 10390622 >Detected 10.390 MHz APIC timer. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 3325.10 BogoMIPS (lpj=6650200) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 2048K >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >CPU1: Thermal monitoring enabled (TM2) >Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 >Brought up 2 CPUs >NET: Registered protocol family 16 >ACPI: bus type pci registered >PCI: Using MMCONFIG at f0000000 - f3ffffff >evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 >evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block >ACPI: EC: EC description table is found, configuring boot EC > >Completing Region/Field/Buffer/Package initialization:.................................................................................................................................................................................................................................................................................... >Initialized 25/27 Regions 142/142 Fields 66/66 Buffers 43/55 Packages (1688 nodes) >Initializing Device/Processor/Thermal objects by executing _INI methods:....... >Executed 7 _INI methods requiring 2 _STA executions (examined 83 objects) >ACPI: Interpreter enabled >ACPI: (supports S0 S3 S4 S5) >ACPI: Using IOAPIC for interrupt routing >ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 >ACPI: PCI Root Bridge [PCI0] (0000:00) >PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO >PCI quirk: region 1180-11bf claimed by ICH6 GPIO >PCI: Transparent bridge - 0000:00:1e.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) >ACPI: Power Resource [PUBS] (on) >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >ACPI: bus type pnp registered >pnp: PnP ACPI: found 12 devices >ACPI: ACPI bus type pnp unregistered >SCSI subsystem initialized >libata version 2.21 loaded. >usbcore: registered new interface driver usbfs >usbcore: registered new interface driver hub >usbcore: registered new device driver usb >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >NET: Registered protocol family 23 >Bluetooth: Core ver 2.11 >NET: Registered protocol family 31 >Bluetooth: HCI device and connection manager initialized >Bluetooth: HCI socket layer initialized >PCI-GART: No AMD northbridge found. >hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >hpet0: 3 64-bit timers, 14318180 Hz >ACPI: RTC can wake from S4 >Time: hpet clocksource has been installed. >pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved >pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved >pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved >pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved >pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved >pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved >pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved >pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved >PCI: Bridge: 0000:00:1c.0 > IO window: 2000-2fff > MEM window: ee000000-ee0fffff > PREFETCH window: disabled. >PCI: Bridge: 0000:00:1c.1 > IO window: 3000-4fff > MEM window: ec000000-edffffff > PREFETCH window: e4000000-e40fffff >PCI: Bridge: 0000:00:1c.2 > IO window: 5000-6fff > MEM window: e8000000-e9ffffff > PREFETCH window: e4100000-e41fffff >PCI: Bridge: 0000:00:1c.3 > IO window: 7000-8fff > MEM window: ea000000-ebffffff > PREFETCH window: e4200000-e42fffff >PCI: Bus 22, cardbus bridge: 0000:15:00.0 > IO window: 00009000-000090ff > IO window: 00009400-000094ff > PREFETCH window: e0000000-e3ffffff > MEM window: 88000000-8bffffff >PCI: Bridge: 0000:00:1e.0 > IO window: 9000-cfff > MEM window: e4300000-e7ffffff > PREFETCH window: e0000000-e3ffffff >ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >NET: Registered protocol family 2 >IP route cache hash table entries: 65536 (order: 7, 524288 bytes) >TCP established hash table entries: 131072 (order: 9, 3145728 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 131072 bind 65536) >TCP reno registered >Simple Boot Flag at 0x35 set to 0x1 >Total HugeTLB memory allocated, 0 >squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher >Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >NTFS driver 2.1.28 [Flags: R/O]. >SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered (default) >io scheduler cfq registered >Boot video device is 0000:00:02.0 >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.0:pcie00] >Allocate Port Service[0000:00:1c.0:pcie02] >Allocate Port Service[0000:00:1c.0:pcie03] >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.1:pcie00] >Allocate Port Service[0000:00:1c.1:pcie02] >Allocate Port Service[0000:00:1c.1:pcie03] >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.2:pcie00] >Allocate Port Service[0000:00:1c.2:pcie02] >Allocate Port Service[0000:00:1c.2:pcie03] >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.3:pcie00] >Allocate Port Service[0000:00:1c.3:pcie02] >Allocate Port Service[0000:00:1c.3:pcie03] >Real Time Clock Driver v1.12ac >hpet_resources: 0xfed00000 is busy >intel_rng: FWH not detected >Linux agpgart interface v0.102 >agpgart: Detected an Intel 945GM Chipset. >agpgart: Detected 7932K stolen memory. >agpgart: AGP aperture is 256M @ 0xd0000000 >ACPI: AC Adapter [AC] (on-line) >ACPI: Battery Slot [BAT0] (battery present) >input: Power Button (FF) as /devices/virtual/input/input0 >ACPI: Power Button (FF) [PWRF] >input: Lid Switch as /devices/virtual/input/input1 >ACPI: Lid Switch [LID] >input: Sleep Button (CM) as /devices/virtual/input/input2 >ACPI: Sleep Button (CM) [SLPB] >ACPI: SSDT 7F6F1D36, 0240 (r1 PmRef Cpu0Ist 100 INTL 20050513) >Parsing all Control Methods: >Table [SSDT](id 00D6) - 6 Objects with 0 Devices 4 Methods 0 Regions >ACPI: SSDT 7F6F1FFB, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) >Parsing all Control Methods: >Table [SSDT](id 00D7) - 13 Objects with 0 Devices 1 Methods 0 Regions >Monitor-Mwait will be used to enter C-1 state >Monitor-Mwait will be used to enter C-2 state >Monitor-Mwait will be used to enter C-3 state >ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >ACPI: Processor [CPU0] (supports 8 throttling states) >ACPI: SSDT 7F6F1C6E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) >Parsing all Control Methods: >Table [SSDT](id 00E1) - 4 Objects with 0 Devices 4 Methods 0 Regions >ACPI: SSDT 7F6F1F76, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) >Parsing all Control Methods: >Table [SSDT](id 00E2) - 1 Objects with 0 Devices 1 Methods 0 Regions >ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >ACPI: Processor [CPU1] (supports 8 throttling states) >ACPI: Thermal Zone [THM0] (58 C) >ACPI: Thermal Zone [THM1] (59 C) >intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets >intelfb: Version 0.9.4 >ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 >intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB >intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. >intelfb: Video mode must be programmed at boot time. >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >floppy0: no floppy controllers found >RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize >loop: module loaded >PPP generic driver version 2.4.2 >PPP Deflate Compression module registered >PPP BSD Compression module registered >NET: Registered protocol family 24 >Linux video capture interface: v2.00 >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >ICH7: IDE controller at PCI slot 0000:00:1f.1 >ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 >ICH7: chipset revision 2 >ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio >Probing IDE interface ide0... >hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive >hda: selected mode 0x42 >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 >ahci 0000:00:1f.2: version 2.3 >ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 >ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode >ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >scsi0 : ahci >scsi1 : ahci >scsi2 : ahci >scsi3 : ahci >ata1: SATA max UDMA/133 cmd 0xffffc2000005a500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 >ata2: SATA max UDMA/133 cmd 0xffffc2000005a580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 >ata3: SATA max UDMA/133 cmd 0xffffc2000005a600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 >ata4: SATA max UDMA/133 cmd 0xffffc2000005a680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: ATA-7: FUJITSU MHV2060BH PL, 0084002A, max UDMA/100 >ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32) >ata1.00: configured for UDMA/100 >ata2: SATA link down (SStatus 0 SControl 0) >ata3: SATA link down (SStatus 0 SControl 0) >ata4: SATA link down (SStatus 0 SControl 0) >scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060B 0084 PQ: 0 ANSI: 5 >sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda3 sda4 >sd 0:0:0:0: [sda] Attached SCSI disk >sd 0:0:0:0: Attached scsi generic sg0 type 0 >ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >ehci_hcd 0000:00:1d.7: EHCI Host Controller >ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:00:1d.7: debug port 1 >PCI: cache line size of 32 is not supported by device 0000:00:1d.7 >ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 >ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 8 ports detected >USB Universal Host Controller Interface driver v3.0 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >uhci_hcd 0000:00:1d.0: UHCI Host Controller >uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >uhci_hcd 0000:00:1d.1: UHCI Host Controller >uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 >uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 >usb usb3: configuration #1 chosen from 1 choice >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >uhci_hcd 0000:00:1d.2: UHCI Host Controller >uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 >uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 >usb usb4: configuration #1 chosen from 1 choice >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >usb 1-4: new high speed USB device using ehci_hcd and address 2 >ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.3 to 64 >uhci_hcd 0000:00:1d.3: UHCI Host Controller >uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 >uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 >usb usb5: configuration #1 chosen from 1 choice >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 2 ports detected >usb 1-4: configuration #1 chosen from 1 choice >usbcore: registered new interface driver usblp >Initializing USB Mass Storage driver... >scsi4 : SCSI emulation for USB Mass Storage devices >usb-storage: device found at 2 >usb-storage: waiting for device to settle before scanning >usbcore: registered new interface driver usb-storage >USB Mass Storage support registered. >usbcore: registered new interface driver berry_charge >PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >serio: i8042 AUX port at 0x60,0x64 irq 12 >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 >device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com >usbcore: registered new interface driver usbhid >drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver >Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). >ALSA device list: > No soundcards found. >TCP cubic registered >NET: Registered protocol family 1 >NET: Registered protocol family 17 >IrCOMM protocol (Dag Brattli) >UDF-fs: No VRS found >XFS mounting filesystem sda4 >Ending clean XFS mount for filesystem: sda4 >VFS: Mounted root (xfs filesystem) readonly. >Freeing unused kernel memory: 268k freed >iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.0.0 >iwl3945: Copyright(c) 2003-2007 Intel Corporation >ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:03:00.0 to 64 >iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection >Non-volatile memory driver v1.2 >Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 >serio: Synaptics pass-through port at isa0060/serio1/input0 >input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 >thinkpad_acpi: ThinkPad ACPI Extras v0.16 >thinkpad_acpi: http://ibm-acpi.sf.net/ >thinkpad_acpi: ThinkPad BIOS 79ETC9WW (2.09 ), EC 79HT50WW-1.07 >thinkpad_acpi: Lenovo ThinkPad T60 >pnp: Device 00:0a activated. >nsc-ircc, chip->init >nsc-ircc, Found chip at base=0x164e >nsc-ircc, driver loaded (Dag Brattli) >IrDA: Registered device irda0 >nsc-ircc, Found dongle: No dongle connected >thinkpad_acpi: radio switch found; radios are enabled >input: ThinkPad Extra Buttons as /devices/virtual/input/input5 >Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] >Yenta: Using INTVAL to route CSC interrupts to PCI >Yenta: Routing CardBus interrupts to PCI >Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 >iwl3945: Channel 12 [2.4GHz] is Tx only -- skipping. >iwl3945: Channel 13 [2.4GHz] is Tx only -- skipping. >iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping. >iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 34 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 38 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 42 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 46 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 100 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 104 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 108 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 112 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 116 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 120 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 124 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 128 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 132 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 136 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 140 [5.2GHz] is Tx only -- skipping. >iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping. >iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels >wmaster0: Selected rate control algorithm 'simple' >udev: renamed network interface wlan0 to wlan2 >Yenta: ISA IRQ mask 0x0cf0, PCI irq 16 >Socket status: 30000011 >pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff >pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff >pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff >scsi 4:0:0:0: Direct-Access Griffin USB HS-CARD 4.52 PQ: 0 ANSI: 0 >sd 4:0:0:0: [sdb] Attached SCSI removable disk >sd 4:0:0:0: Attached scsi generic sg1 type 0 >usb-storage: device scan complete >rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 >rtc_cmos: probe of 00:07 failed with error -16 >ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 >i2c /dev entries driver >pccard: PCMCIA card inserted into slot 0 >thinkpad_ec: thinkpad_ec 0.31 loaded. >tp_smapi 0.31 loading... >tp_smapi successfully loaded (smapi_port=0xb2). >hdaps: LENOVO ThinkPad T60 detected, inverting axes >hdaps: initial mode latch is 0x05 >hdaps: setting ec_rate=250, filter_order=2 >hdaps: fake_data_mode set to 0 >hdaps: device successfully initialized. >input: hdaps as /devices/platform/hdaps/input/input6 >hdaps: driver successfully loaded. >ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 >Copyright (c) 1999-2006 Intel Corporation. >ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:02:00.0 to 64 >e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not Valid >ACPI: PCI interrupt for device 0000:02:00.0 disabled >e1000: probe of 0000:02:00.0 failed with error -5 >usbcore: registered new interface driver uvcvideo >USB Video Class driver (v0.1.0) >Adding 2094112k swap on /dev/sda3. Priority:-1 extents:1 across:2094112k >IBM TrackPoint firmware: 0x0e, buttons: 3/3 >input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 >cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff >cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff 0xe4e70000-0xe523ffff 0xe5db0000-0xe617ffff 0xe6cf0000-0xe70bffff >pcmcia: registering new device pcmcia0.0 >airo(): Probing for PCI adapters >airo(): Finished probing for PCI adapters >pcmcia: request for exclusive IRQ could not be fulfilled. >pcmcia: the driver needs updating to supported shared IRQ lines. >pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. >pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. >pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. >ata1.00: configured for UDMA/100 >ata1: EH complete >sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >airo(): cmd:111 status:7f11 rsp0:2 rsp1:0 rsp2:0 >airo(): Doing fast bap_reads >airo(): WPA unsupported (only firmware versions 5.30.17 and greater support WPA. Detected 5.02.19) >airo(eth0): MAC enabled 0:f:34:42:ce:64 >eth0: index 0x05: , Vpp 5.0, irq 16, io 0x9100-0x913f >udev: renamed network interface eth0 to eth1 >Bluetooth: L2CAP ver 2.8 >Bluetooth: L2CAP socket layer initialized >Bluetooth: RFCOMM socket layer initialized >Bluetooth: RFCOMM TTY layer initialized >Bluetooth: RFCOMM ver 1.8 >smapi smapi: set_real_thresh: set start to 49 for bat=0 >smapi smapi: set_real_thresh: set stop to 90 for bat=0 >pccard: card ejected from slot 0 >airo(eth1): cmd:2 status:ffff rsp0:ffff rsp1:ffff rsp2:ffff >airo(eth1): cmd:21 status:ffff rsp0:ffff rsp1:ffff rsp2:ffff >airo(eth1): cmd:21 status:ffff rsp0:ffff rsp1:ffff rsp2:ffff >airo(eth1): cmd:21 status:ffff rsp0:ffff rsp1:ffff rsp2:ffff >airo(eth1): cmd:21 status:ffff rsp0:ffff rsp1:ffff rsp2:ffff >[drm] Initialized drm 1.1.0 20060810 >[drm] Initialized i915 1.6.0 20060119 on minor 0 >iwl3945: REPLY_ADD_STA failed >wlan2: Initial auth_alg=0 >wlan2: authenticate with AP 00:18:f8:4f:a3:bd >wlan2: RX authentication from 00:18:f8:4f:a3:bd (alg=0 transaction=2 status=0) >wlan2: authenticated >wlan2: associate with AP 00:18:f8:4f:a3:bd >wlan2: RX AssocResp from 00:18:f8:4f:a3:bd (capab=0x411 status=0 aid=1) >wlan2: associated >iwl3945: iwl-3945-rs not selected as rate control aglo!
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 195673
: 133573 |
133575
|
135854