Linux version 2.6.22-gentoo-r8 (root@machina) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #10 SMP Wed Oct 3 16:33:59 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) BIOS-e820: 000000001f6e0000 - 000000001f6eb000 (ACPI data) BIOS-e820: 000000001f6eb000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 0MB HIGHMEM available. 502MB LOWMEM available. Entering add_active_range(0, 0, 128736) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 128736 HighMem 128736 -> 128736 early_node_map[1] active PFN ranges 0: 0 -> 128736 On node 0 totalpages: 128736 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 973 pages used for memmap Normal zone: 123667 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. Using APIC driver default ACPI: RSDP 000F6700, 0014 (r0 PTLTD ) ACPI: RSDT 1F6E6557, 0030 (r1 PTLTD Montara 6040000 LTP 0) ACPI: FACP 1F6EAED2, 0074 (r1 INTEL MONTARAG 6040000 PTL 50) ACPI: DSDT 1F6E6A68, 446A (r1 INTEL MONTARAG 6040000 MSFT 100000E) ACPI: FACS 1F6FBFC0, 0040 ACPI: BOOT 1F6EAFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 1F6E6587, 04D9 (r1 INTEL GV3Ref 1001 MSFT 100000E) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000) Built 1 zonelists. Total pages: 127731 Kernel command line: root=/dev/hda3 console=tty1 vga=0x318 i8042.nomux=1 i8042.direct=1 i8042.debug=0 i8042.nopnp=1 i8042.dumbkbd=1 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (013fd000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 599.941 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 502832k/514944k available (3518k kernel code, 11496k reserved, 1737k data, 388k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe16000 - 0xfffff000 (1956 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB) .init : 0xc062b000 - 0xc068c000 ( 388 kB) .data : 0xc046f8e7 - 0xc062202c (1737 kB) .text : 0xc0100000 - 0xc046f8e7 (3518 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1209.57 BogoMIPS (lpj=2419151) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 19k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c00) CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd6c4, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs *11) ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 23 Time: tsc clocksource has been installed. pnp: 00:04: ioport range 0x600-0x60f has been reserved pnp: 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved PCI: Bus 3, cardbus bridge: 0000:02:09.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 30000000-33ffffff MEM window: 38000000-3bffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: e0200000-e02fffff PREFETCH window: 30000000-35ffffff PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 785k freed Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:00:02.0 Real Time Clock Driver v1.12ac intel_rng: FWH not detected Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 855GM Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 [drm] Initialized drm 1.1.0 20060810 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). vesafb: framebuffer at 0xe8000000, mapped to 0xe0180000, using 6144k, total 8000k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (off-line) Switched to high resolution mode on CPU 0 ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLP2] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRS] (23 C) ACPI: Thermal Zone [THRC] (23 C) intelfb: intelfb_init intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 intelfb: intelfb_setup intelfb: no options intelfb: intelfb_pci_register ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 intelfb: fb aperture: 0xe8000000/0x8000000, MMIO region: 0xe0000000/0x80000 intelfb: Cannot reserve FB region. intelfb: cleanup Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. Clocksource tsc unstable (delta = -157948110 ns) floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 eth0: Broadcom 4400 10/100BaseT Ethernet 00:0a:e4:21:a0:f0 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: FUJITSU MHT2040AT, ATA DISK drive hda: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive hdc: selected mode 0x42 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.002. Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0202000-e02027ff] Max Packet=[2048] IR/IT contexts=[8/8] ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP detection disabled serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice ieee1394: Host added: ID:BUS[0-00:1023] GUID[03e40a009c002042] input: AT Raw Set 2 keyboard as /class/input/input3 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input4 intel8x0_measure_ac97_clock: measured 55247 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with CS4299 at irq 10 oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI Shortcut mode Freeing unused kernel memory: 388k freed JFS: nTxBlock = 3939, nTxLock = 31516 ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names udev: renamed network interface eth0 to eth1 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection eth0: Radio is disabled by RF switch. udev: renamed network interface eth0 to eth2 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names Adding 977248k swap on /dev/hda2. Priority:-1 extents:1 across:977248k fsam7400: SW RF kill switch for Fujitsu Siemens Amilo M 7400, v0.5.0 fsam7400: Copyright(c) 2004 zwobbl ;) WARNING: at arch/i386/kernel/smp.c:559 native_smp_call_function_mask() [] native_smp_call_function_mask+0x43/0xf5 [] do_flush_tlb_all+0x0/0x57 [] do_flush_tlb_all+0x0/0x57 [] do_flush_tlb_all+0x0/0x57 [] smp_call_function+0x1c/0x21 [] on_each_cpu+0x18/0x27 [] init_module+0x0/0x306 [fsam7400] [] flush_tlb_all+0x1b/0x1d [] remove_vm_area+0x2c/0x48 [] init_module+0x0/0x306 [fsam7400] [] __vunmap+0x40/0xd1 [] init_module+0x12d/0x306 [fsam7400] [] sys_init_module+0x154e/0x1627 [] param_get_int+0x0/0x20 [] sysenter_past_esp+0x5f/0x85 [] c_start+0x6d/0xb8 ======================= ADDRCONF(NETDEV_UP): eth2: link is not ready fsam7400: module removed successfully ACPI: PCI interrupt for device 0000:02:06.0 disabled ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready b44: eth1: Link is up at 100 Mbps, full duplex. b44: eth1: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present Hangcheck: hangcheck value past margin! ADDRCONF(NETDEV_UP): eth1: link is not ready b44: eth1: Link is up at 100 Mbps, full duplex. b44: eth1: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present Hangcheck: hangcheck value past margin! ADDRCONF(NETDEV_UP): eth1: link is not ready b44: eth1: Link is up at 100 Mbps, full duplex. b44: eth1: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present ADDRCONF(NETDEV_UP): eth1: link is not ready b44: eth1: Link is up at 100 Mbps, full duplex. b44: eth1: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present b44: eth1: Link is down. b44: eth1: Link is up at 100 Mbps, half duplex. b44: eth1: Flow control is off for TX and off for RX. Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! ADDRCONF(NETDEV_UP): eth1: link is not ready b44: eth1: Link is up at 100 Mbps, half duplex. b44: eth1: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin! Hangcheck: hangcheck value past margin!