compilation and installation messages

nut.log (text/plain), 54.28 KB, created by Olivier Mondoloni on 2007-10-04 17:59:59 UTC

 * nut-2.0.5.tar.gz RMD160 ;-) ...                                        [ ok ]
 * nut-2.0.5.tar.gz SHA1 ;-) ...                                          [ ok ]
 * nut-2.0.5.tar.gz SHA256 ;-) ...                                        [ ok ]
 * nut-2.0.5.tar.gz size ;-) ...                                          [ ok ]
 * checking ebuild checksums ;-) ...                                      [ ok ]
 * checking auxfile checksums ;-) ...                                     [ ok ]
 * checking miscfile checksums ;-) ...                                    [ ok ]
 * checking nut-2.0.5.tar.gz ;-) ...                                      [ ok ]
Retrait de l'utilisateur nut du groupe tty
gpasswd : membre nut inconnu
Ajout de l'utilisateur nut au groupe uucp
Ajout de l'utilisateur nut au groupe nut
 [33;01m*[0m Please note that NUT now runs under the 'nut' user.
 [33;01m*[0m NUT is in the uucp group for access to RS-232 UPS.
 [33;01m*[0m However if you use a USB UPS you may need to look at the udev or
 [33;01m*[0m hotplug rules that are installed, and alter them suitably.
>>> Unpacking source...
>>> Unpacking nut-2.0.5.tar.gz to /var/tmp/portage/sys-power/nut-2.0.5-r2/work
 [32;01m*[0m Applying upsstats-upsset-link-2.0.5.patch ...
[A[204C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying nut-2.0.5-bcmxcp-3phase.patch ...
[A[204C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Replacing obsolete head/tail with POSIX compliant ones
 [32;01m*[0m  - fixed configure.in
 [32;01m*[0m Recreating configure ...
[A[204C  [34;01m[ [32;01mok[34;01m ][0m
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5 ...
 * econf: updating nut-2.0.5/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating nut-2.0.5/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --with-user=nut --with-group=nut --with-drvpath=/lib/nut --sysconfdir=/etc/nut --with-logfacility=LOG_DAEMON --with-statepath=/var/lib/nut --with-ssl --without-cgi --without-cgipath --libdir=/usr/lib64 --build=x86_64-pc-linux-gnu
checking NUT version... 2.0.5
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ar... /usr/bin/ar
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking for inline... inline
checking for flock... yes
checking for lockf... yes
checking for fcvt... yes
checking for fcvtl... no
checking for cfsetispeed... yes
checking for tcsendbreak... yes
checking for seteuid... yes
checking for setsid... yes
checking for getpassphrase... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for setenv... yes
checking for inet_aton... yes
checking for strerror... yes
checking for atexit... yes
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking for getopt declarations... in unistd.h
checking whether to use uu_lock... no
checking for connect... yes
checking sys/modem.h usability... no
checking sys/modem.h presence... no
checking for sys/modem.h... no
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking varargs.h usability... no
checking varargs.h presence... no
checking for varargs.h... no
checking sys/termios.h usability... yes
checking sys/termios.h presence... yes
checking for sys/termios.h... yes
checking whether time.h and sys/time.h may both be included... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for socklen_t... yes
checking for stdint.h... (cached) yes
checking for uint16_t... yes
checking for stdint.h... (cached) yes
checking for uint8_t... yes
checking whether to enable SSL development code... yes
checking for gd version via gdlib-config... not found
checking for gd include flags... using defaults
checking for gd library flags... using defaults
checking whether to build CGI programs... no
checking for Net-SNMP cflags... not found
checking for Net-SNMP libs... not found
checking for libusb cflags... 
checking for libusb libs... -L/usr/lib64 -lusb
checking for usb_detach_kernel_driver_np in -lusb... yes
checking for Linux hiddev.h... using default: /usr/include/linux/hiddev.h
checking state path... /var/lib/nut
checking alt pid path... using default: /var/lib/nut
checking driver path... /lib/nut
checking cgi path... using default
checking html path... using default
checking pidpath... using default: /var/run
checking network port number... using default value: 3493
checking user to run as... nut
checking facility for syslog... LOG_DAEMON
checking which drivers to build... all
checking whether to strip debug symbols... no
checking whether to enable pkg-config support... yes
checking for long long... yes
configure: creating ./config.status
config.status: creating clients/Makefile
config.status: creating conf/Makefile
config.status: creating data/Makefile
config.status: WARNING:  data/Makefile.in seems to ignore the --datarootdir setting
config.status: creating data/html/Makefile
config.status: creating data/html/header.html
config.status: creating drivers/Makefile
config.status: creating server/Makefile
config.status: creating Makefile
config.status: creating common/Makefile
config.status: creating man/Makefile
config.status: WARNING:  man/Makefile.in seems to ignore the --datarootdir setting
config.status: creating lib/Makefile
config.status: creating lib/libupsclient-config
config.status: creating lib/libupsclient.pc
config.status: creating scripts/hotplug/libhidups
config.status: creating scripts/hotplug-ng/nut-usbups.rules
config.status: creating include/config.h
common/
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/common »
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o common.o common.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o upsconf.o upsconf.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o parseconf.o parseconf.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o state.o state.c
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/common »
drivers/
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o bestups.o bestups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o main.o main.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o serial.o serial.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o dstate.o dstate.c
serial.c: In function ‘ser_send_pace’:
serial.c:210: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’
serial.c: In function ‘ser_send’:
serial.c:240: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’
serial.c: In function ‘ser_comm_fail’:
serial.c:462: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o fentonups.o fentonups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o apcsmart.o apcsmart.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o everups.o everups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o belkin.o belkin.c
dstate.c: In function ‘send_to_all’:
dstate.c:182: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘size_t’
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o masterguard.o masterguard.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o powercom.o powercom.c
belkin.c: In function ‘send_belkin_command’:
belkin.c:35: attention : format ‘%03d’ expects type ‘int’, but argument 4 has type ‘size_t’
belkin.c: In function ‘do_broken_rat’:
belkin.c:146: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
belkin.c:163: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
belkin.c: In function ‘get_belkin_reply’:
belkin.c:287: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
belkin.c:303: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o cyberpower.o cyberpower.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o tripplite.o tripplite.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o victronups.o victronups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o genericups.o genericups.c
cyberpower.c: In function ‘confirm_write’:
cyberpower.c:206: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
cyberpower.c:210: attention : format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
cyberpower.c: In function ‘ups_on_line’:
cyberpower.c:237: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
cyberpower.c: In function ‘upsdrv_shutdown’:
cyberpower.c:263: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
cyberpower.c: In function ‘upsdrv_updateinfo’:
cyberpower.c:337: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o mge-utalk.o mge-utalk.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o bestuferrups.o bestuferrups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o isbmex.o isbmex.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o etapro.o etapro.c
tripplite.c: In function ‘send_cmd’:
tripplite.c:172: attention : pointer targets in passing argument 2 of ‘ser_get_char’ differ in signedness
tripplite.c:179: attention : pointer targets in passing argument 2 of ‘ser_get_char’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o liebert.o liebert.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o sms.o sms.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o esupssmart.o esupssmart.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o tripplitesu.o tripplitesu.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o blazer.o blazer.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o safenet.o safenet.c
etapro.c: In function ‘etapro_get_response’:
etapro.c:69: attention : pointer targets in passing argument 2 of ‘ser_get_char’ differ in signedness
tripplitesu.c: In function ‘do_command’:
tripplitesu.c:220: attention : format ‘%03d’ expects type ‘int’, but argument 4 has type ‘size_t’
tripplitesu.c:223: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
tripplitesu.c:228: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
tripplitesu.c:240: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o belkinunv.o belkinunv.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o oneac.o oneac.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o ippon.o ippon.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o cpsups.o cpsups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o mustek.o mustek.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o metasys.o metasys.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o bestfcom.o bestfcom.c
metasys.c: In function ‘send_zeros’:
metasys.c:92: attention : pointer targets in passing argument 2 of ‘ser_send_buf’ differ in signedness
metasys.c: In function ‘send_read_command’:
metasys.c:119: attention : pointer targets in passing argument 2 of ‘ser_send_buf’ differ in signedness
metasys.c: In function ‘send_write_command’:
metasys.c:148: attention : pointer targets in passing argument 2 of ‘ser_send_buf’ differ in signedness
metasys.c: In function ‘get_answer’:
metasys.c:160: attention : pointer targets in passing argument 2 of ‘ser_get_char’ differ in signedness
metasys.c:170: attention : pointer targets in passing argument 2 of ‘ser_get_char’ differ in signedness
metasys.c:181: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o megatec.o megatec.c
bestfcom.c: In function ‘execute’:
bestfcom.c:195: attention : pointer targets in passing argument 2 of ‘ser_get_char’ differ in signedness
bestfcom.c: In function ‘upsdrv_updateinfo’:
bestfcom.c:244: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘size_t’
bestfcom.c:397: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘size_t’
bestfcom.c: In function ‘upsdrv_init_fc’:
bestfcom.c:651: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘size_t’
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o bcmxcp.o bcmxcp.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o bcmxcp_ser.o bcmxcp_ser.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o upscode2.o upscode2.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o solis.o solis.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o gamatronic.o gamatronic.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o al175.o al175.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o nitram.o nitram.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o optiups.o optiups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o rhino.o rhino.c
solis.c: In function ‘getbaseinfo’:
solis.c:882: attention : pointer targets in passing argument 1 of ‘CommReceive’ differ in signedness
solis.c:884: attention : pointer targets in passing argument 1 of ‘CommReceive’ differ in signedness
solis.c: In function ‘getupdateinfo’:
solis.c:998: attention : pointer targets in passing argument 1 of ‘CommReceive’ differ in signedness
al175.c: In function ‘comli_prepare’:
al175.c:390: attention : pointer targets in passing argument 1 of ‘snprintf’ differ in signedness
al175.c: In function ‘al_parse_reply_head’:
al175.c:548: attention : pointer targets in passing argument 1 of ‘from_hex’ differ in signedness
al175.c:554: attention : pointer targets in passing argument 1 of ‘from_hex’ differ in signedness
al175.c: In function ‘get_char’:
al175.c:776: attention : pointer targets in passing argument 2 of ‘ser_get_char’ differ in signedness
al175.c: In function ‘get_buf’:
al175.c:781: attention : pointer targets in passing argument 2 of ‘ser_get_buf_len’ differ in signedness
al175.c: In function ‘recv_command_ack’:
al175.c:828: attention : pointer targets in passing argument 1 of ‘get_buf’ differ in signedness
al175.c: In function ‘recv_register_data’:
al175.c:875: attention : pointer targets in passing argument 1 of ‘get_buf’ differ in signedness
al175.c:907: attention : pointer targets in passing argument 1 of ‘get_buf’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o powerpanel.o powerpanel.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -c mge-shut.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -c hidparser.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o dummy-ups.o dummy-ups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o upsdrvctl upsdrvctl.c ../common/upsconf.o \
		../common/parseconf.o ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o bestups bestups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o fentonups fentonups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o apcsmart apcsmart.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
dummy-ups.c: In function ‘parse_data_file’:
dummy-ups.c:246: attention : format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o everups everups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o belkin belkin.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o masterguard masterguard.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o powercom powercom.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o cyberpower cyberpower.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o tripplite tripplite.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    -lm
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o victronups victronups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o genericups genericups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o mge-utalk mge-utalk.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o bestuferrups bestuferrups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o isbmex isbmex.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    -lm
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o etapro etapro.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o liebert liebert.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o sms sms.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o esupssmart esupssmart.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o tripplitesu tripplitesu.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o blazer blazer.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o safenet safenet.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o belkinunv belkinunv.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o oneac oneac.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o ippon ippon.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o cpsups cpsups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o mustek mustek.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o metasys metasys.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o bestfcom bestfcom.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o megatec megatec.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o bcmxcp bcmxcp.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o bcmxcp_ser.o ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o upscode2 upscode2.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    -lm
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o solis solis.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o gamatronic gamatronic.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o al175 al175.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o nitram nitram.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o optiups optiups.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o rhino rhino.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    -lm
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o powerpanel powerpanel.o main.o serial.o dstate.o ../common/state.o ../common/upsconf.o ../common/parseconf.o  ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o mge-shut mge-shut.o hidparser.o main.o \
		dstate.o serial.o ../common/state.o ../common/upsconf.o \
		../common/parseconf.o ../common/common.o    
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o dummy-ups dummy-ups.o main.o dstate.o ../common/state.o \
	../common/upsconf.o ../common/parseconf.o ../common/common.o    
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
server/
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/server »
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c upsd.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o user.o user.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c conf.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c ssl.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o sstate.o sstate.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o access.o access.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c netget.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c netmisc.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c netlist.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c netuser.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c netset.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c netinstcmd.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare   -c -o desc.o desc.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o upsd upsd.o user.o conf.o ssl.o sstate.o access.o netget.o netmisc.o netlist.o netuser.o netset.o netinstcmd.o desc.o ../common/state.o ../common/upsconf.o ../common/parseconf.o \
		 ../common/common.o -lssl -lcrypto
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/server »
clients/
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/clients »
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c upsclient.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o upssched upssched.c ../common/parseconf.o ../common/common.o  
/usr/bin/ar rv libupsclient.a upsclient.o ../common/parseconf.o
/usr/bin/ar: création de libupsclient.a
a - upsclient.o
a - ../common/parseconf.o
x86_64-pc-linux-gnu-ranlib libupsclient.a
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o upsc upsc.c libupsclient.a ../common/common.o   -lssl -lcrypto
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o upslog upslog.c libupsclient.a ../common/common.o   -lssl -lcrypto
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o upsrw upsrw.c libupsclient.a ../common/common.o   -lssl -lcrypto
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o upscmd upscmd.c libupsclient.a ../common/common.o   -lssl -lcrypto
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -o upsmon upsmon.c libupsclient.a ../common/common.o   -lssl -lcrypto
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/clients »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c newhidups.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c libhid.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c libusb.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c explore-hid.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c mge-hid.c
libusb.c: In function ‘libusb_get_string’:
libusb.c:364: attention : format ‘%i’ expects type ‘int’, but argument 5 has type ‘long unsigned int’
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c apc-hid.c
libhid.c: In function ‘HIDGetItemString’:
libhid.c:711: attention : pointer targets in passing argument 3 of ‘comm_driver->get_string’ differ in signedness
libhid.c:712: attention : pointer targets in return differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c belkin-hid.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c tripplite-hid.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c bcmxcp_usb.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c nut_usb.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare  -c tripplite_usb.c
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -c hidups.c
nut_usb.c: In function ‘nutusb_comm_fail’:
nut_usb.c:191: attention : format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’
bcmxcp_usb.c: In function ‘get_answer’:
bcmxcp_usb.c:47: attention : pointer targets in passing argument 3 of ‘usb_interrupt_read’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -c energizerups.c
tripplite_usb.c: In function ‘hex2d’:
tripplite_usb.c:386: attention : pointer targets in passing argument 1 of ‘__builtin_strncpy’ differ in signedness
tripplite_usb.c:386: attention : pointer targets in passing argument 2 of ‘__builtin_strncpy’ differ in signedness
tripplite_usb.c:388: attention : pointer targets in passing argument 1 of ‘strtol’ differ in signedness
tripplite_usb.c: In function ‘hexascdump’:
tripplite_usb.c:406: attention : pointer targets in passing argument 1 of ‘sprintf’ differ in signedness
tripplite_usb.c:417: attention : pointer targets in return differ in signedness
tripplite_usb.c: In function ‘instcmd’:
tripplite_usb.c:676: attention : pointer targets in passing argument 1 of ‘send_cmd’ differ in signedness
tripplite_usb.c:680: attention : pointer targets in passing argument 1 of ‘send_cmd’ differ in signedness
tripplite_usb.c:684: attention : pointer targets in passing argument 1 of ‘send_cmd’ differ in signedness
tripplite_usb.c: In function ‘upsdrv_initinfo’:
tripplite_usb.c:780: attention : pointer targets in passing argument 1 of ‘strtol’ differ in signedness
tripplite_usb.c:804: attention : pointer targets in passing argument 1 of ‘toprint_str’ differ in signedness
tripplite_usb.c:817: attention : pointer targets in passing argument 1 of ‘snprintf’ differ in signedness
tripplite_usb.c:818: attention : pointer targets in passing argument 2 of ‘dstate_setinfo’ differ in signedness
tripplite_usb.c: In function ‘debug_message’:
tripplite_usb.c:884: attention : pointer targets in passing argument 1 of ‘send_cmd’ differ in signedness
tripplite_usb.c:884: attention : pointer targets in passing argument 3 of ‘send_cmd’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o newhidups newhidups.o main.o dstate.o \
		../common/state.o ../common/upsconf.o ../common/parseconf.o \
		../common/common.o    -L/usr/lib64 -lusb  libhid.o libusb.o hidparser.o \
		explore-hid.o mge-hid.o apc-hid.o belkin-hid.o tripplite-hid.o
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o bcmxcp_usb bcmxcp.o bcmxcp_usb.o nut_usb.o \
		main.o dstate.o ../common/state.o ../common/upsconf.o \
		../common/parseconf.o \
		../common/common.o    -L/usr/lib64 -lusb 
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o tripplite_usb tripplite_usb.o main.o dstate.o \
		../common/state.o ../common/upsconf.o ../common/parseconf.o \
		../common/common.o    -L/usr/lib64 -lusb  -lm libhid.o libusb.o hidparser.o
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o hidups hidups.o main.o dstate.o \
		../common/state.o ../common/upsconf.o ../common/parseconf.o \
		../common/common.o    
energizerups.c: In function ‘hidcmd’:
energizerups.c:253: attention : pointer targets in passing argument 2 of ‘sendstring’ differ in signedness
energizerups.c: In function ‘instcmd’:
energizerups.c:291: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:298: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:312: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:312: attention : pointer targets in passing argument 2 of ‘hidcmd’ differ in signedness
energizerups.c:314: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:314: attention : pointer targets in passing argument 2 of ‘hidcmd’ differ in signedness
energizerups.c:321: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c: In function ‘upsdrv_initinfo’:
energizerups.c:346: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:346: attention : pointer targets in passing argument 2 of ‘hidcmd’ differ in signedness
energizerups.c:363: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c: In function ‘upsdrv_updateinfo’:
energizerups.c:385: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:385: attention : pointer targets in passing argument 2 of ‘hidcmd’ differ in signedness
energizerups.c: In function ‘upsdrv_shutdown’:
energizerups.c:449: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:449: attention : pointer targets in passing argument 2 of ‘hidcmd’ differ in signedness
energizerups.c:450: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
energizerups.c:450: attention : pointer targets in passing argument 2 of ‘hidcmd’ differ in signedness
energizerups.c:465: attention : pointer targets in passing argument 1 of ‘hidcmd’ differ in signedness
x86_64-pc-linux-gnu-gcc -I../include -march=nocona -O2 -pipe -Wall -Wsign-compare -o energizerups energizerups.o main.o dstate.o \
		../common/state.o ../common/upsconf.o ../common/parseconf.o \
		../common/common.o    
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
>>> Source compiled.
>>> Test phase [not enabled]: sys-power/nut-2.0.5-r2

>>> Install nut-2.0.5-r2 into /var/tmp/portage/sys-power/nut-2.0.5-r2/image/ category sys-power
cd conf; make install; cd ..
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/conf »
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/conf »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/common »
make[1]: Rien à faire pour « install ».
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/common »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
/usr/bin/install -c -m 0755 bestups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 fentonups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 apcsmart /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 everups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 belkin /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 masterguard /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 powercom /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 cyberpower /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 tripplite /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 victronups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 genericups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 mge-utalk /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 bestuferrups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 isbmex /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 etapro /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 liebert /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 sms /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 esupssmart /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 tripplitesu /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 blazer /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 safenet /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 belkinunv /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 oneac /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 ippon /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 cpsups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 mustek /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 metasys /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 bestfcom /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 megatec /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 bcmxcp /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 upscode2 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 solis /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 gamatronic /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 al175 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 nitram /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 optiups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 rhino /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 powerpanel /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 mge-shut /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 upsdrvctl /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut;
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/server »
/usr/bin/install -c upsd /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/sbin
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/server »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/clients »
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/clients »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/man »
../install-sh -d /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man
../install-sh -d /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man5
../install-sh -d /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 al175.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 apcsmart.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 bcmxcp.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 belkin.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 belkinunv.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 bestuferrups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 bestups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 bestfcom.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 cpsups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 cyberpower.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 dummy-ups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 etapro.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 everups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 fentonups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 genericups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 ippon.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 isbmex.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 liebert.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 masterguard.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 metasys.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 mge-shut.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 mge-utalk.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 mustek.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 nitram.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 oneac.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 optiups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 powercom.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 powerpanel.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 megatec.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 safenet.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 sms.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 solis.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 tripplite.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 tripplitesu.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upscode2.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 victronups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 ups.conf.5 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man5
/usr/bin/install -c -m 0644 upssched.conf.5 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man5
/usr/bin/install -c -m 0644 upsd.conf.5 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man5
/usr/bin/install -c -m 0644 upsmon.conf.5 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man5
/usr/bin/install -c -m 0644 upsd.users.5 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man5
/usr/bin/install -c -m 0644 upsc.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upsrw.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upscmd.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upslog.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upssched.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upsmon.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upsd.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 nutupsdrv.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 upsdrvctl.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/man »
cd data; make install; cd ..
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/data »
/usr/bin/install -c -m 0644 cmdvartab /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share
/usr/bin/install -c -m 0644 driver.list /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/data »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/clients »
/usr/bin/install -c -m 0644 upsclient.h /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/include
/usr/bin/install -c -m 0644 libupsclient.a /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/lib64
/usr/bin/install -c -m 0644 ../include/parseconf.h /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/include
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/clients »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/man »
../install-sh -d /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man3
/usr/bin/install -c -m 0644 upscli_connect.3 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man3
/usr/bin/install -c -m 0644 upscli_disconnect.3 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man3
/usr/bin/install -c -m 0644 upscli_readline.3 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man3
/usr/bin/install -c -m 0644 upscli_sendline.3 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man3
/usr/bin/install -c -m 0644 upscli_splitname.3 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man3
/usr/bin/install -c -m 0644 upscli_strerror.3 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man3
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/man »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/lib »
/usr/bin/install -c -m 0755 libupsclient-config /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/bin
../install-sh -d /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/lib/pkgconfig
/usr/bin/install -c -m 0644 libupsclient.pc /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/lib/pkgconfig
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/lib »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
/usr/bin/install -c -m 0755 newhidups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 bcmxcp_usb /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 tripplite_usb /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 hidups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
/usr/bin/install -c -m 0755 energizerups /var/tmp/portage/sys-power/nut-2.0.5-r2/image//lib/nut
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/drivers »
make[1]: entrant dans le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/man »
/usr/bin/install -c -m 0644 newhidups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 bcmxcp_usb.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 tripplite_usb.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 hidups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
/usr/bin/install -c -m 0644 energizerups.8 /var/tmp/portage/sys-power/nut-2.0.5-r2/image//usr/share/man/man8
make[1]: quittant le répertoire « /var/tmp/portage/sys-power/nut-2.0.5-r2/work/nut-2.0.5/man »
chmod: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/hosts.conf': Aucun fichier ou répertoire de ce type
chmod: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/upsset.conf': Aucun fichier ou répertoire de ce type
chmod: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/upsstats.html': Aucun fichier ou répertoire de ce type
chmod: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/upsstats-single.html': Aucun fichier ou répertoire de ce type
chown: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/hosts.conf': Aucun fichier ou répertoire de ce type
chown: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/upsset.conf': Aucun fichier ou répertoire de ce type
chown: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/upsstats.html': Aucun fichier ou répertoire de ce type
chown: ne peut accéder `/var/tmp/portage/sys-power/nut-2.0.5-r2/image//etc/nut/upsstats-single.html': Aucun fichier ou répertoire de ce type
>>> Completed installing nut-2.0.5-r2 into /var/tmp/portage/sys-power/nut-2.0.5-r2/image/

ecompressdir: bzip2 -9 usr/share/man
strip: x86_64-pc-linux-gnu-strip --strip-unneeded -R .comment
   lib/nut/metasys
   lib/nut/liebert
   lib/nut/etapro
   lib/nut/mge-shut
   lib/nut/bestfcom
   lib/nut/optiups
   lib/nut/tripplite
   lib/nut/gamatronic
   lib/nut/genericups
   lib/nut/belkin
   lib/nut/hidups
   lib/nut/oneac
   lib/nut/bcmxcp
   lib/nut/masterguard
   lib/nut/blazer
   lib/nut/bestups
   lib/nut/energizerups
   lib/nut/everups
   lib/nut/powercom
   lib/nut/fentonups
   lib/nut/cpsups
   lib/nut/apcsmart
   lib/nut/mustek
   lib/nut/upsdrvctl
   lib/nut/isbmex
   lib/nut/belkinunv
   lib/nut/cyberpower
   lib/nut/esupssmart
   lib/nut/ippon
   lib/nut/al175
   lib/nut/upscode2
   lib/nut/sms
   lib/nut/safenet
   lib/nut/tripplitesu
   lib/nut/tripplite_usb
   lib/nut/newhidups
   lib/nut/solis
   lib/nut/megatec
   lib/nut/bcmxcp_usb
   lib/nut/victronups
   lib/nut/mge-utalk
   lib/nut/rhino
   lib/nut/powerpanel
   lib/nut/bestuferrups
   lib/nut/nitram
   usr/bin/upsc
   usr/bin/upscmd
   usr/bin/upslog
   usr/bin/upsrw
   usr/sbin/upssched
   usr/sbin/upsmon
   usr/sbin/upsd
   usr/lib64/libupsclient.a