From: Laurent Riffard Date: Sun, 2 Sep 2007 19:01:32 +0000 (+0200) Subject: Fix broken pata_via cable detection X-Git-Tag: v2.6.23-rc6~1^2~3 X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Flinville%2Fwireless-dev.git;a=commitdiff_plain;h=08ebd43d6b9b63de681b8f255c0fabae8033527c Fix broken pata_via cable detection via_do_set_mode overwrites 80-wire cable detection bits. Let's preserve them. Signed-off-by: Laurent Riffard Acked-by: Alan Cox Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index ea18e33..1b0acaf 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -243,7 +243,6 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo int ut; int offset = 3 - (2*ap->port_no) - adev->devno; - /* Calculate the timing values we require */ ata_timing_compute(adev, mode, &t, T, UT); @@ -290,9 +289,17 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; break; } + /* Set UDMA unless device is not UDMA capable */ - if (udma_type) - pci_write_config_byte(pdev, 0x50 + offset, ut); + if (udma_type) { + u8 cable80_status; + + /* Get 80-wire cable detection bit */ + pci_read_config_byte(pdev, 0x50 + offset, &cable80_status); + cable80_status &= 0x10; + + pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status); + } } static void via_set_piomode(struct ata_port *ap, struct ata_device *adev)