dmesg output

dmesg-efi.txt (text/plain), 31.16 KB, created by Thomas Meyer on 2007-09-20 21:28:33 UTC

Linux version 2.6.23-rc7 (thomas@hotzenplotz) (gcc version 4.2.0 (Gentoo 4.2.0 p1.4)) #13 SMP Thu Sep 20 01:14:57 CEST 2007
EFI: EFI v0.101 by Apple 
 ACPI=0x7fefd000 <6> ACPI 2.0=0x7fefd014 <6> SMBIOS=0x7feba000 
1150MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 523961) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   523961
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   523961
On node 0 totalpages: 523961
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2301 pages used for memmap
  HighMem zone: 292284 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 7FEFD014, 0024 (r2 APPLE )
ACPI: XSDT 7FEFD120, 0074 (r1 APPLE   Apple00       55       1000013)
ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       55 Loki       5F)
ACPI: DSDT 7FEF0000, 48C0 (r1 APPLE  MacBookP    10001 INTL 20050309)
ACPI: FACS 7FEBB000, 0040
ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
ACPI: ASF! 7FEF7000, 009C (r32 APPLE   Apple00        1 Loki       5F)
ACPI: SBST 7FEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: ECDT 7FEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: SSDT 7FEB6000, 064F (r1 APPLE   SataPri     1000 INTL 20050309)
ACPI: SSDT 7FEB5000, 069C (r1 APPLE   SataSec     1000 INTL 20050309)
ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10100000 (gap: 10000000:00400000)
Built 1 zonelists in Zone order.  Total pages: 519868
Kernel command line: BOOT_IMAGE=atapi0:\EFI\gentoo\bzImage  root=/dev/sda3 lapic_timer_c2_ok usbcore.autosuspend=1
Unknown boot option `usbcore.autosuspend=1': ignoring
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c03b5000 soft=c03b3000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Oops: efitime: can't read time status: 0x80000007
Detected 1830.950 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071740k/2095844k available (1798k kernel code, 20532k reserved, 714k data, 216k init, 1175948k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc037a000 - 0xc03b0000   ( 216 kB)
      .data : 0xc02c1b1b - 0xc03745c4   ( 714 kB)
      .text : 0xc0100000 - 0xc02c1b1b   (1798 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3666.72 BogoMIPS (lpj=6108364)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 694 Objects with 80 Devices 157 Methods 29 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 11 Objects with 3 Devices 5 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 13 Objects with 0 Devices 4 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
CPU0: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03b6000 soft=c03b4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3663.39 BogoMIPS (lpj=6103025)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
Total of 2 processors activated (7329.11 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 6 Runtime GPEs in this block
ACPI: EC: EC description table is found, configuring boot EC

Completing Region/Field/Buffer/Package initialization:..........................................................
Initialized 27/29 Regions 0/0 Fields 22/22 Buffers 9/19 Packages (737 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to [e-mail]
..
Executed 2 _INI methods requiring 0 _STA executions (examined 90 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [8086/27a0] 000600 00
PCI: Calling quirk c0266f66 for 0000:00:00.0
PCI: Found 0000:00:01.0 [8086/27a1] 000604 01
PCI: Calling quirk c0266f66 for 0000:00:01.0
PCI: Found 0000:00:07.0 [8086/27a3] 001101 00
PCI: Calling quirk c0266f66 for 0000:00:07.0
PCI: Found 0000:00:1b.0 [8086/27d8] 000403 00
PCI: Calling quirk c0266f66 for 0000:00:1b.0
PCI: Found 0000:00:1c.0 [8086/27d0] 000604 01
PCI: Calling quirk c0266f66 for 0000:00:1c.0
PCI: Found 0000:00:1c.1 [8086/27d2] 000604 01
PCI: Calling quirk c0266f66 for 0000:00:1c.1
PCI: Found 0000:00:1c.2 [8086/27d4] 000604 01
PCI: Calling quirk c0266f66 for 0000:00:1c.2
PCI: Found 0000:00:1d.0 [8086/27c8] 000c03 00
PCI: Calling quirk c0266f66 for 0000:00:1d.0
PCI: Found 0000:00:1d.1 [8086/27c9] 000c03 00
PCI: Calling quirk c0266f66 for 0000:00:1d.1
PCI: Found 0000:00:1d.2 [8086/27ca] 000c03 00
PCI: Calling quirk c0266f66 for 0000:00:1d.2
PCI: Found 0000:00:1d.3 [8086/27cb] 000c03 00
PCI: Calling quirk c0266f66 for 0000:00:1d.3
PCI: Found 0000:00:1d.7 [8086/27cc] 000c03 00
PCI: Calling quirk c0266f66 for 0000:00:1d.7
PCI: Found 0000:00:1e.0 [8086/2448] 000604 01
PCI: Calling quirk c0266f66 for 0000:00:1e.0
PCI: Found 0000:00:1f.0 [8086/27b9] 000601 00
PCI: Calling quirk c01d833a for 0000:00:1f.0
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Calling quirk c0266f66 for 0000:00:1f.0
PCI: Found 0000:00:1f.1 [8086/27df] 000101 00
PCI: Calling quirk c0266f66 for 0000:00:1f.1
PCI: Found 0000:00:1f.2 [8086/27c5] 000106 00
PCI: Calling quirk c0266f66 for 0000:00:1f.2
PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00
PCI: Calling quirk c0266f66 for 0000:00:1f.3
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [1002/71c5] 000300 00
PCI: Fixups for bus 0000:01
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:1c.0, config 020200, pass 0
PCI: Scanning bus 0000:02
PCI: Found 0000:02:00.0 [11ab/4362] 000200 00
PCI: Fixups for bus 0000:02
PCI: Bus scan for 0000:02 returning with max=02
PCI: Scanning behind PCI bridge 0000:00:1c.1, config 030300, pass 0
PCI: Scanning bus 0000:03
PCI: Found 0000:03:00.0 [168c/001c] 000200 00
PCI: Fixups for bus 0000:03
PCI: Bus scan for 0000:03 returning with max=03
PCI: Scanning behind PCI bridge 0000:00:1c.2, config 0b0400, pass 0
PCI: Scanning bus 0000:04
PCI: Fixups for bus 0000:04
PCI: Bus scan for 0000:04 returning with max=04
PCI: Scanning behind PCI bridge 0000:00:1e.0, config 0c0c00, pass 0
PCI: Scanning bus 0000:0c
PCI: Found 0000:0c:03.0 [11c1/5811] 000c00 00
PCI: Fixups for bus 0000:0c
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus scan for 0000:0c returning with max=0c
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1
PCI: Scanning behind PCI bridge 0000:00:1c.0, config 020200, pass 1
PCI: Scanning behind PCI bridge 0000:00:1c.1, config 030300, pass 1
PCI: Scanning behind PCI bridge 0000:00:1c.2, config 0b0400, pass 1
PCI: Scanning behind PCI bridge 0000:00:1e.0, config 0c0c00, pass 1
PCI: Bus scan for 0000:00 returning with max=0c
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
pnp: 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
  got res [90320000:9033ffff] bus [90320000:9033ffff] flags 7200 for BAR 6 of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: 90300000-903fffff
  PREFETCH window: 80000000-87ffffff
  got res [7ff00000:7ff1ffff] bus [7ff00000:7ff1ffff] flags 7200 for BAR 6 of 0000:02:00.0
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: 90200000-902fffff
  PREFETCH window: 7ff00000-7fffffff
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: 90100000-901fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
  IO window: 1000-1fff
  MEM window: 8c100000-900fffff
  PREFETCH window: 88000000-8bffffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: 8c000000-8c0fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Enabling bus mastering for device 0000:00:1c.2
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Calling quirk c01d7f0b for 0000:00:00.0
PCI: Calling quirk c01d849f for 0000:00:00.0
PCI: Calling quirk c0250dbe for 0000:00:00.0
PCI: Calling quirk c0267456 for 0000:00:00.0
PCI: Calling quirk c01d7f0b for 0000:00:01.0
PCI: Calling quirk c01d849f for 0000:00:01.0
PCI: Calling quirk c0250dbe for 0000:00:01.0
PCI: Calling quirk c0267456 for 0000:00:01.0
PCI: Calling quirk c01d7f0b for 0000:00:07.0
PCI: Calling quirk c01d849f for 0000:00:07.0
PCI: Calling quirk c0250dbe for 0000:00:07.0
PCI: Calling quirk c0267456 for 0000:00:07.0
PCI: Calling quirk c01d7f0b for 0000:00:1b.0
PCI: Calling quirk c01d849f for 0000:00:1b.0
PCI: Calling quirk c0250dbe for 0000:00:1b.0
PCI: Calling quirk c0267456 for 0000:00:1b.0
PCI: Calling quirk c01d7f0b for 0000:00:1c.0
PCI: Calling quirk c01d849f for 0000:00:1c.0
PCI: Calling quirk c0250dbe for 0000:00:1c.0
PCI: Calling quirk c0267456 for 0000:00:1c.0
PCI: Calling quirk c01d7f0b for 0000:00:1c.1
PCI: Calling quirk c01d849f for 0000:00:1c.1
PCI: Calling quirk c0250dbe for 0000:00:1c.1
PCI: Calling quirk c0267456 for 0000:00:1c.1
PCI: Calling quirk c01d7f0b for 0000:00:1c.2
PCI: Calling quirk c01d849f for 0000:00:1c.2
PCI: Calling quirk c0250dbe for 0000:00:1c.2
PCI: Calling quirk c0267456 for 0000:00:1c.2
PCI: Calling quirk c01d7f0b for 0000:00:1d.0
PCI: Calling quirk c01d849f for 0000:00:1d.0
PCI: Calling quirk c0250dbe for 0000:00:1d.0
PCI: Calling quirk c0267456 for 0000:00:1d.0
PCI: Calling quirk c01d7f0b for 0000:00:1d.1
PCI: Calling quirk c01d849f for 0000:00:1d.1
PCI: Calling quirk c0250dbe for 0000:00:1d.1
PCI: Calling quirk c0267456 for 0000:00:1d.1
PCI: Calling quirk c01d7f0b for 0000:00:1d.2
PCI: Calling quirk c01d849f for 0000:00:1d.2
PCI: Calling quirk c0250dbe for 0000:00:1d.2
PCI: Calling quirk c0267456 for 0000:00:1d.2
PCI: Calling quirk c01d7f0b for 0000:00:1d.3
PCI: Calling quirk c01d849f for 0000:00:1d.3
PCI: Calling quirk c0250dbe for 0000:00:1d.3
PCI: Calling quirk c0267456 for 0000:00:1d.3
PCI: Calling quirk c01d7f0b for 0000:00:1d.7
PCI: Calling quirk c01d849f for 0000:00:1d.7
PCI: Calling quirk c0250dbe for 0000:00:1d.7
PCI: Calling quirk c0267456 for 0000:00:1d.7
PCI: Calling quirk c01d7f0b for 0000:00:1e.0
PCI: Calling quirk c01d849f for 0000:00:1e.0
PCI: Calling quirk c0250dbe for 0000:00:1e.0
PCI: Calling quirk c0267456 for 0000:00:1e.0
PCI: Calling quirk c01d7f0b for 0000:00:1f.0
PCI: Calling quirk c01d849f for 0000:00:1f.0
PCI: Calling quirk c0250dbe for 0000:00:1f.0
PCI: Calling quirk c0267456 for 0000:00:1f.0
PCI: Calling quirk c01d7f0b for 0000:00:1f.1
PCI: Calling quirk c01d849f for 0000:00:1f.1
PCI: Calling quirk c0250dbe for 0000:00:1f.1
PCI: Calling quirk c0267456 for 0000:00:1f.1
PCI: Calling quirk c01d7f0b for 0000:00:1f.2
PCI: Calling quirk c01d849f for 0000:00:1f.2
PCI: Calling quirk c0250dbe for 0000:00:1f.2
PCI: Calling quirk c0267456 for 0000:00:1f.2
PCI: Calling quirk c01d7f0b for 0000:00:1f.3
PCI: Calling quirk c01d849f for 0000:00:1f.3
PCI: Calling quirk c0250dbe for 0000:00:1f.3
PCI: Calling quirk c0267456 for 0000:00:1f.3
PCI: Calling quirk c01d849f for 0000:01:00.0
PCI: Calling quirk c0250dbe for 0000:01:00.0
PCI: Calling quirk c0267456 for 0000:01:00.0
PCI: Calling quirk c01d849f for 0000:02:00.0
PCI: Calling quirk c0250dbe for 0000:02:00.0
PCI: Calling quirk c0267456 for 0000:02:00.0
PCI: Calling quirk c01d849f for 0000:03:00.0
PCI: Calling quirk c0250dbe for 0000:03:00.0
PCI: Calling quirk c0267456 for 0000:03:00.0
PCI: Calling quirk c01d849f for 0000:0c:03.0
PCI: Calling quirk c0250dbe for 0000:0c:03.0
PCI: Calling quirk c0267456 for 0000:0c:03.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
imacfb: MacBookPro1,1 detected - set system to 0
imacfb: framebuffer at 0x80010000, mapped to 0xf8900000, using 10350k, total 16384k
imacfb: mode is 1440x900x32, linelength=5888, pages=1
imacfb: scrolling: redraw
imacfb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 180x56
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
fb0: IMAC VGA frame buffer device
hpet_resources: 0xfed00000 is busy
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.17 addr 0x90200000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:16:cb:8c:b2:65
netconsole: not configured, aborting
input: Macintosh mouse button emulation as /devices/virtual/input/input0
ahci 0000:00:1f.2: version 2.3
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part 
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xf882c100 ctl 0x00000000 bmdma 0x00000000 irq 218
ata2: SATA max UDMA/133 cmd 0xf882c180 ctl 0x00000000 bmdma 0x00000000 irq 218
ata3: SATA max UDMA/133 cmd 0xf882c200 ctl 0x00000000 bmdma 0x00000000 irq 218
ata4: SATA max UDMA/133 cmd 0xf882c280 ctl 0x00000000 bmdma 0x00000000 irq 218
ata1: SATA link down (SStatus 0 SControl 0)
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max UDMA/133
ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 0)
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda6
sd 2:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/133 cmd 0x000140e8 ctl 0x000140fe bmdma 0x000140c0 irq 18
ata6: PATA max UDMA/133 cmd 0x000140e0 ctl 0x000140fa bmdma 0x000140c8 irq 18
ata5.00: ATAPI: MATSHITADVD-R   UJ-857, HAEA, max UDMA/66
ata5.00: configured for UDMA/66
scsi 4:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857   HAEA PQ: 0 ANSI: 5
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [e-mail]
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
input: Video Bus as /devices/virtual/input/input1
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
tpm_inf_pnp 00:03: Found TPM with ID IFX0101
tpm_inf_pnp 00:03: TPM found: config base 0x4e, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
wlan: 0.8.4.2 (svn r2708)
ath_pci: 0.9.4.5 (svn r2708)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Enabling bus mastering for device 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90405400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Enabling bus mastering for device 0000:03:00.0
PCI: Setting latency timer of device 0000:03:00.0 to 64
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Enabling bus mastering for device 0000:00:1b.0
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: STAC922x, Apple subsys_id=106b0200
usb 1-2: device not accepting address 2, error -71
ath_pci: switching rfkill capability off
ath_rate_sample: 1.2 (svn r2708)
ath_pci: switching per-packet transmit power control off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.3 phy 6.1 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[8c000000-8c0007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
usb 5-4: new high speed USB device using ehci_hcd and address 3
usb 5-4: configuration #1 chosen from 1 choice
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0016cbfffe4c8a54]
EXT3 FS on sda3, internal journal
usb 1-2: new full speed USB device using uhci_hcd and address 4
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/virtual/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/virtual/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: AC Adapter [ADP1] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
usb 1-2: configuration #1 chosen from 1 choice
ACPI: SSDT 7FEB3C90, 022A (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
Parsing all Control Methods:
Table [SSDT](id 0034) - 5 Objects with 0 Devices 3 Methods 0 Regions
ACPI: SSDT 7FEB2C10, 02C3 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
Parsing all Control Methods:
Table [SSDT](id 0035) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FEB3F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
Parsing all Control Methods:
Table [SSDT](id 003A) - 3 Objects with 0 Devices 3 Methods 0 Regions
ACPI: SSDT 7FEB2F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
Parsing all Control Methods:
Table [SSDT](id 003B) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
usb 3-2: new full speed USB device using uhci_hcd and address 2
PCI: Enabling device 0000:00:1f.3 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
usb 3-2: configuration #1 chosen from 1 choice
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input6
input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2/input/input7
input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
HID device not claimed by input or hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb 4-1: new full speed USB device using uhci_hcd and address 2
sr 4:0:0:0: Attached scsi generic sg1 type 5
applesmc: Apple MacBook Pro detected:
applesmc:  - Model with accelerometer
applesmc:  - Model with light sensors and backlight
applesmc:  - Model with 12 temperature sensors
applesmc: device has already been initialized (0xe0, 0xf8).
applesmc: device successfully initialized.
applesmc: 2 fans found.
input: applesmc as /devices/platform/applesmc.768/input/input8
Registered led device: smc:kbd_backlight
applesmc: driver successfully loaded.
usb 4-1: configuration #1 chosen from 1 choice
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input9
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input10
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
appletouch Geyser 3 inited.
input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input11
usbcore: registered new interface driver appletouch
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clocksource tsc unstable (delta = -145744407 ns)
kjournald starting.  Commit interval 90 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1214416k swap on /dev/dm-0.  Priority:-1 extents:1 across:1214416k
pktcdvd: writer pktcdvd0 mapped to sr0
fuse init (API version 7.8)
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K