PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *7)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Power Resource [PUT2] (on)
ACPI: Power Resource [PFA1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
pnp: 00:06: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:06: iomem range 0xf0008000-0xf000bfff has been reserved
pnp: 00:06: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:06: iomem range 0xfed18000-0xfed18fff has been reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: c000-dfff
  MEM window: c0000000-cfffffff
  PREFETCH window: 90000000-9fffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
  IO window: 00002400-000024ff
  IO window: 00002800-000028ff
  PREFETCH window: 80000000-83ffffff
  MEM window: b4000000-b7ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 2000-3fff
  MEM window: b0000000-bfffffff
  PREFETCH window: 80000000-8fffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1185464688.124:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with large block numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
vesafb: unrecognized option mtrr
vesafb: ATI Technologies Inc., P24 , 01.00 (OEM: ATI MOBILITY RADEON X600   )
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:57b9
vesafb: pmi: set display start = c00c5827, set palette = c00c5861
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=3072
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0x90000000, mapped to 0xf8d80000, using 6144k, total 65536k
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: Transitioning device [FAN1] to D3
ACPI: Transitioning device [FAN1] to D3
ACPI: Fan [FAN1] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
ACPI Exception (thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
ACPI: Thermal Zone [THZN] (79 C)
ACPI: Thermal Zone [THZV] (73 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2080AH, ATA DISK drive
Clocksource tsc unstable (delta = -426582251 ns)
hdb: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
i2c /dev entries driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.0.1 Jul 26 2007
oprofile: using timer interrupt.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0x804719/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input5
UDF-fs: No VRS found
XFS mounting filesystem hda1
Ending clean XFS mount for filesystem: hda1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 220k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001240
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0x70000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1e.2 to 64
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
intel8x0_measure_ac97_clock: measured 55484 usecs
intel8x0: clocking to 48000
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
eth0: RTL8169sb/8110sb at 0xf8ce6000, 00:03:9d:75:92:cd, IRQ 11
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1e.3 to 64
Yenta: CardBus bridge found at 0000:06:09.0 [17ff:5006]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:09.0, mfunc 0x01aa1b22, devctl 0x66
Yenta: ISA IRQ mask 0x0078, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x3fff
cs: IO port probe 0x2000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xbfffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8fffffff
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:09.3[D] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
ACPI: PCI Interrupt 0000:06:09.2[C] -> Link [LNKE] -> GSI 7 (level, low) -> IRQ 7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[7]  MMIO=[b0000000-b00007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
cs: IO port probe 0x100-0x3af: excluding 0x300-0x307 0x310-0x31f
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
video1394: Installed video1394 module
NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
ieee1394: raw1394: /dev/raw1394 device initialized
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
irq 10: nobody cared (try booting with the "irqpoll" option)
 [<c014d5b4>] __report_bad_irq+0x24/0x90
 [<c014d879>] note_interrupt+0x259/0x290
 [<c014e262>] handle_level_irq+0xd2/0x110
 [<c010695b>] do_IRQ+0x3b/0x80
 [<c0104a73>] common_interrupt+0x23/0x28
 [<c03b00d8>] bit_cursor+0x358/0x630
 [<c014cad1>] handle_IRQ_event+0x11/0x60
 [<c014e20c>] handle_level_irq+0x7c/0x110
 [<c010695b>] do_IRQ+0x3b/0x80
 [<c03b010c>] bit_cursor+0x38c/0x630
 [<c0104a73>] common_interrupt+0x23/0x28
 [<f9435670>] set_phy_reg+0x60/0xc0 [ohci1394]
 [<f943612d>] ohci_devctl+0x47d/0x6e0 [ohci1394]
 [<f945c8ef>] csr1212_generate_csr_image+0x2cf/0x3d0 [ieee1394]
 [<c04f3521>] schedule+0x2a1/0x650
 [<f9454630>] delayed_reset_bus+0x0/0xe0 [ieee1394]
 [<f945201c>] hpsb_reset_bus+0x1c/0x30 [ieee1394]
 [<c012ec51>] run_workqueue+0xa1/0x180
 [<c012f337>] worker_thread+0x137/0x160
 [<c011ab29>] __wake_up_common+0x39/0x70
 [<c011ba80>] default_wake_function+0x0/0x10
 [<c012f200>] worker_thread+0x0/0x160
 [<c0132139>] kthread+0xa9/0xe0
 [<c0132090>] kthread+0x0/0xe0
 [<c0104bf3>] kernel_thread_helper+0x7/0x14
 =======================
handlers:
[<f9385cf0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<f9385cf0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<f9385cf0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<f93dc6f0>] (snd_intel8x0_interrupt+0x0/0x240 [snd_intel8x0])
Disabling IRQ #10
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00a0d15555555555]
ipw2200: Firmware error detected.  Restarting.
ipw2200: Firmware error detected.  Restarting.
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.25.0 20060524 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
ipw2200: Firmware error detected.  Restarting.