2.6.22-gentoo-r1 cpufreq.debug=3 dmesg

dmesg-2.6.22-gentoo-r1.cpufreq.debug=3.txt (text/plain), 25.75 KB, created by Joshua Hoblitt on 2007-07-19 04:38:54 UTC

Linux version 2.6.22-gentoo-r1 (root@po01) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 SMP Wed Jul 18 18:07:30 HST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
 BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 524272) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   524272
early_node_map[1] active PFN ranges
    0:        0 ->   524272
On node 0 totalpages: 524272
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2303 pages used for memmap
  HighMem zone: 292593 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP 000FF9B0, 0014 (r0 INTEL )
ACPI: RSDT 7FFF0000, 0030 (r1 INTEL  SWV25           1 MSFT  1000000)
ACPI: FACP 7FFF0030, 0074 (r1 INTEL  SWV25           1 MSFT  1000000)
ACPI: DSDT 7FFF0190, 28C4 (r1  INTEL    SWV25      100 INTL 20020918)
ACPI: FACS 7FFFF000, 0040
ACPI: APIC 7FFF00B0, 0090 (r1 INTEL  SWV25           1 MSFT  1000000)
ACPI: SPCR 7FFF0140, 0050 (r1 INTEL  SWV25           1 MSFT  1000000)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec81400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec81400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists.  Total pages: 520177
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 doscsi cpufreq.debug=3
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec81000)
mapped IOAPIC to ffffa000 (fec81400)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0420000 soft=c0418000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2791.133 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072668k/2097088k available (2039k kernel code, 23116k reserved, 801k data, 284k init, 1179584k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03cc000 - 0xc0413000   ( 284 kB)
      .data : 0xc02fdf36 - 0xc03c6664   ( 801 kB)
      .text : 0xc0100000 - 0xc02fdf36   (2039 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5587.60 BogoMIPS (lpj=9308171)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 13k freed
ACPI: Core revision 20070126
ACPI Warning (dswload-0698): Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
ACPI Warning (dswload-0698): Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope) [20070126]
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
Booting processor 1/6 eip 2000
CPU 1 irqstacks, hard=c0421000 soft=c0419000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5583.29 BogoMIPS (lpj=9302877)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
Total of 2 processors activated (11171.90 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=588
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x40b-0x40b has been reserved
pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:02:1d.0
  IO window: disabled.
  MEM window: fe900000-fe9fffff
  PREFETCH window: f8400000-fc4fffff
PCI: Bridge: 0000:02:1f.0
  IO window: 2000-2fff
  MEM window: fe800000-fe8fffff
  PREFETCH window: f8300000-f83fffff
PCI: Bridge: 0000:00:03.0
  IO window: 2000-2fff
  MEM window: fe800000-feafffff
  PREFETCH window: f8300000-fc5fffff
PCI: Bridge: 0000:00:1e.0
  IO window: 1000-1fff
  MEM window: fc700000-fe7fffff
  PREFETCH window: f8200000-f82fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2218k freed
Machine check exception polling timer started.
speedstep-lib: x86: f, model: 2
speedstep-lib: ebx value is b, x86_mask is 9
speedstep-ich: Intel(R) SpeedStep(TM) capable processor not found
speedstep-lib: x86: f, model: 2
speedstep-lib: ebx value is b, x86_mask is 9
speedstep-smi: No supported Intel CPU detected.
audit: initializing netlink socket (disabled)
audit(1184783634.316:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:0c.0
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x03a0-0x03a7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x03a8-0x03af, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
cpufreq-core: trying to register driver p4-clockmod
cpufreq-core: adding CPU 0
speedstep-lib: x86: f, model: 2
speedstep-lib: ebx value is b, x86_mask is 9
speedstep-lib: P4 - MSR_EBC_FREQUENCY_ID: 0x15010915 0x0
speedstep-lib: P4 - FSB 133330 kHz; Multiplier 21; Speed 2799930 kHz
freq-table: setting show_table for cpu 0 to c03968c0
freq-table: table entry 0 is invalid, skipping
freq-table: table entry 1: 349991 kHz, 1 index
freq-table: table entry 2: 699982 kHz, 2 index
freq-table: table entry 3: 1049973 kHz, 3 index
freq-table: table entry 4: 1399965 kHz, 4 index
freq-table: table entry 5: 1749956 kHz, 5 index
freq-table: table entry 6: 2099947 kHz, 6 index
freq-table: table entry 7: 2449938 kHz, 7 index
freq-table: table entry 8: 2799930 kHz, 8 index
cpufreq-core: setting new policy for CPU 0: 349991 - 2799930 kHz
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 0
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 0
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 0
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 0
cpufreq-core: new min and max freqs are 349991 - 2799930 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 0, event 1
cpufreq-core: target for CPU 0: 2799930 kHz, relation 1
freq-table: request for target 2799930 kHz (relation: 1) for cpu 0
freq-table: target is 8 (2799930 kHz, 8)
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 0, event 3
cpufreq-core: target for CPU 0: 2799930 kHz, relation 1
freq-table: request for target 2799930 kHz (relation: 1) for cpu 0
freq-table: target is 8 (2799930 kHz, 8)
cpufreq-core: initialization complete
cpufreq-core: adding CPU 1
speedstep-lib: x86: f, model: 2
speedstep-lib: ebx value is b, x86_mask is 9
speedstep-lib: P4 - MSR_EBC_FREQUENCY_ID: 0x15010915 0x0
speedstep-lib: P4 - FSB 133330 kHz; Multiplier 21; Speed 2799930 kHz
freq-table: setting show_table for cpu 1 to c03968c0
freq-table: table entry 0 is invalid, skipping
freq-table: table entry 1: 349991 kHz, 1 index
freq-table: table entry 2: 699982 kHz, 2 index
freq-table: table entry 3: 1049973 kHz, 3 index
freq-table: table entry 4: 1399965 kHz, 4 index
freq-table: table entry 5: 1749956 kHz, 5 index
freq-table: table entry 6: 2099947 kHz, 6 index
freq-table: table entry 7: 2449938 kHz, 7 index
freq-table: table entry 8: 2799930 kHz, 8 index
cpufreq-core: setting new policy for CPU 1: 349991 - 2799930 kHz
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 1
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 1
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 1
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 1
cpufreq-core: new min and max freqs are 349991 - 2799930 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 1, event 1
cpufreq-core: target for CPU 1: 2799930 kHz, relation 1
freq-table: request for target 2799930 kHz (relation: 1) for cpu 1
freq-table: target is 8 (2799930 kHz, 8)
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 1, event 3
cpufreq-core: target for CPU 1: 2799930 kHz, relation 1
freq-table: request for target 2799930 kHz (relation: 1) for cpu 1
freq-table: target is 8 (2799930 kHz, 8)
cpufreq-core: initialization complete
cpufreq-core: driver p4-clockmod up and running
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 284k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:03:08.2[C] -> GSI 25 (level, low) -> IRQ 17
ehci_hcd 0000:03:08.2: EHCI Host Controller
ehci_hcd 0000:03:08.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:03:08.2: irq 17, io mem 0xfe8f0000
ehci_hcd 0000:03:08.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
Initializing USB Mass Storage driver...
usb 1-3: new high speed USB device using ehci_hcd and address 2
usb 1-3: configuration #1 chosen from 1 choice
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 24 (level, low) -> IRQ 19
ohci_hcd 0000:03:08.0: OHCI Host Controller
ohci_hcd 0000:03:08.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:03:08.0: irq 19, io mem 0xfe8d0000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:03:08.1[B] -> GSI 27 (level, low) -> IRQ 20
ohci_hcd 0000:03:08.1: OHCI Host Controller
ohci_hcd 0000:03:08.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:03:08.1: irq 20, io mem 0xfe8e0000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [e-mail]
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level, low) -> IRQ 21
e1000: 0000:03:07.0: e1000_probe: (PCI:33MHz:64-bit) 00:0e:0c:08:40:70
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level, low) -> IRQ 22
e1000: 0000:03:07.1: e1000_probe: (PCI:33MHz:64-bit) 00:0e:0c:08:40:71
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 48 (level, low) -> IRQ 23
GDT-HA: Found 1 PCI Storage RAID Controllers
Configuring GDT-PCI HA at 4/8 IRQ 23
GDT-HA 0: Name: SRCZCR
scsi4 : SRCZCR
scsi 4:0:0:0: Direct-Access     Intel    Host Drive  #00       PQ: 0 ANSI: 2
sd 4:0:0:0: [sda] 286599600 512-byte hardware sectors (146739 MB)
sd 4:0:0:0: [sda] Assuming Write Enabled
sd 4:0:0:0: [sda] Assuming drive cache: write through
sd 4:0:0:0: [sda] 286599600 512-byte hardware sectors (146739 MB)
sd 4:0:0:0: [sda] Assuming Write Enabled
sd 4:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:3:0: Direct-Access     Intel    Host Drive  #03       PQ: 0 ANSI: 2
sd 4:0:3:0: [sdb] 286663860 512-byte hardware sectors (146772 MB)
sd 4:0:3:0: [sdb] Assuming Write Enabled
sd 4:0:3:0: [sdb] Assuming drive cache: write through
sd 4:0:3:0: [sdb] 286663860 512-byte hardware sectors (146772 MB)
sd 4:0:3:0: [sdb] Assuming Write Enabled
sd 4:0:3:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:3:0: [sdb] Attached SCSI disk
sd 4:0:3:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: Direct-Access     ST330083 1A               3.03 PQ: 0 ANSI: 0
sd 1:0:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
scsi 0:0:0:0: Direct-Access     ST330083 1A               3.03 PQ: 0 ANSI: 0
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 10 00 00 00
sd 1:0:0:0: [sdc] Assuming drive cache: write through
sd 0:0:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
sd 0:0:0:0: [sdd] Write Protect is off
sd 0:0:0:0: [sdd] Mode Sense: 10 00 00 00
sd 0:0:0:0: [sdd] Assuming drive cache: write through
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 10 00 00 00
sd 1:0:0:0: [sdc] Assuming drive cache: write through
 sdc:<5>sd 0:0:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 0:0:0:0: [sdd] Write Protect is off
sd 0:0:0:0: [sdd] Mode Sense: 10 00 00 00
sd 0:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdc1
sd 1:0:0:0: [sdc] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
 sdd1
sd 0:0:0:0: [sdd] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
scsi 4:2:6:0: Processor         ESG-SHV  SCA HSBP M18     0.07 PQ: 0 ANSI: 2
scsi 4:2:6:0: Attached scsi generic sg4 type 3
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT FC Host driver 3.04.04
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
Adaptec aacraid driver (1.1-5[2437]-mh4)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
Emulex LightPulse Fibre Channel SCSI driver 8.1.12
Copyright(c) 2004-2007 Emulex.  All rights reserved.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 24
EXT3 FS on sda3, internal journal
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4008208k swap on /dev/sda2.  Priority:-1 extents:1 across:4008208k
Real Time Clock Driver v1.12ac
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Installing knfsd (copyright (C) 1996 [e-mail]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
cpufreq-core: setting new policy for CPU 0: 349991 - 2799930 kHz
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 0
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 0
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 0
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 0
cpufreq-core: new min and max freqs are 349991 - 2799930 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 0, event 2
cpufreq-core: __cpufreq_governor for CPU 0, event 1
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 0, event 3
cpufreq-core: setting new policy for CPU 1: 349991 - 2799930 kHz
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 1
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 1
freq-table: request for verification of policy (349991 - 2799930 kHz) for cpu 1
freq-table: verification lead to (349991 - 2799930 kHz) for cpu 1
cpufreq-core: new min and max freqs are 349991 - 2799930 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 1, event 2
cpufreq-core: __cpufreq_governor for CPU 1, event 1
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 1, event 3
cpufreq-core: target for CPU 1: 1679958 kHz, relation 0
freq-table: request for target 1679958 kHz (relation: 0) for cpu 1
freq-table: target is 5 (1749956 kHz, 5)
cpufreq-core: notification 0 of frequency transition to 1749956 kHz
p4-clockmod: CPU#1 setting duty cycle to 62%
cpufreq-core: notification 1 of frequency transition to 1749956 kHz
cpufreq-core: target for CPU 0: 2439939 kHz, relation 0
freq-table: request for target 2439939 kHz (relation: 0) for cpu 0
freq-table: target is 7 (2449938 kHz, 7)
cpufreq-core: notification 0 of frequency transition to 2449938 kHz