Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 124507 Details for
Bug 184852
[2.6.21.2 regression] S3 ACPI wakeup from suspend broken
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
dmesg immediately after booting into 2.6.21-r2 (the failed kernel)
dmesg.r2 (text/plain), 30.54 KB, created by
devsk
on 2007-07-11 04:28:51 UTC
(
hide
)
Description:
dmesg immediately after booting into 2.6.21-r2 (the failed kernel)
Filename:
MIME Type:
Creator:
devsk
Created:
2007-07-11 04:28:51 UTC
Size:
30.54 KB
patch
obsolete
>Linux version 2.6.21-gentoo-r2 (root@localhost) (gcc version 4.2.0 (Gentoo 4.2.0)) #1 SMP Sun Jul 8 21:09:40 PDT 2007 >Command line: root=/dev/ram0 init=/linuxrc real_root=/dev/mapper/nvidia_afjdcbaf9 dodmraid splash=verbose,theme:livecd-2007.0 console=tty1 vga=794 video=vesafb:ywrap,pmipal,1280x1024-32@60 elevator=deadline >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009cc00 (usable) > BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) > BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) > BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) > BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) >Entering add_active_range(0, 0, 156) 0 entries of 256 used >Entering add_active_range(0, 256, 524000) 1 entries of 256 used >end_pfn_map = 1048576 >DMI 2.2 present. >ACPI: RSDP 000F79B0, 0014 (r0 Nvidia) >ACPI: RSDT 7FEE3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) >ACPI: FACP 7FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) >ACPI: DSDT 7FEE3180, 5F5D (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) >ACPI: FACS 7FEE0000, 0040 >ACPI: MCFG 7FEE9200, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) >ACPI: APIC 7FEE9140, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) >Entering add_active_range(0, 0, 156) 0 entries of 256 used >Entering add_active_range(0, 256, 524000) 1 entries of 256 used >Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 >early_node_map[2] active PFN ranges > 0: 0 -> 156 > 0: 256 -> 524000 >On node 0 totalpages: 523900 > DMA zone: 56 pages used for memmap > DMA zone: 1529 pages reserved > DMA zone: 2411 pages, LIFO batch:0 > DMA32 zone: 7108 pages used for memmap > DMA32 zone: 512796 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap >Nvidia board detected. Ignoring ACPI timer override. >If you got timer trouble try acpi_use_timer_override >ACPI: PM-Timer IO Port: 0x1008 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >Processor #0 (Bootup-CPU) >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >Processor #1 >ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: BIOS IRQ0 pin2 override ignored. >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) >ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) >ACPI: IRQ9 used by override. >ACPI: IRQ14 used by override. >ACPI: IRQ15 used by override. >Setting APIC routing to physical flat >Using ACPI (MADT) for SMP configuration information >Nosave address range: 000000000009c000 - 000000000009d000 >Nosave address range: 000000000009d000 - 00000000000a0000 >Nosave address range: 00000000000a0000 - 00000000000f0000 >Nosave address range: 00000000000f0000 - 0000000000100000 >Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) >SMP: Allowing 2 CPUs, 0 hotplug CPUs >PERCPU: Allocating 32256 bytes of per cpu data >Built 1 zonelists. Total pages: 515207 >Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/mapper/nvidia_afjdcbaf9 dodmraid splash=verbose,theme:livecd-2007.0 console=tty1 vga=794 video=vesafb:ywrap,pmipal,1280x1024-32@60 elevator=deadline >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 32768 bytes) >time.c: Detected 2303.007 MHz processor. >Console: colour dummy device 80x25 >Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >Checking aperture... >CPU 0: aperture @ 602000000 size 32 MB >Aperture too small (32 MB) >No AGP bridge found >Memory: 2055832k/2096000k available (3572k kernel code, 39372k reserved, 1687k data, 252k init) >Calibrating delay using timer specific routine.. 4607.29 BogoMIPS (lpj=2303647) >Mount-cache hash table entries: 256 >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 512K (64 bytes/line) >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 0 >SMP alternatives: switching to UP code >ACPI: Core revision 20070126 >Using local APIC timer interrupts. >result 14393816 >Detected 14.393 MHz APIC timer. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4605.31 BogoMIPS (lpj=2302657) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 512K (64 bytes/line) >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 >Brought up 2 CPUs >migration_cost=151 >NET: Registered protocol family 16 >ACPI: bus type pci registered >PCI: Using MMCONFIG at e0000000 - efffffff >PCI: No mmconfig possible on device 00:18 >ACPI: Interpreter enabled >ACPI: (supports S0 S3 S4 S5) >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (0000:00) >PCI: Probing PCI hardware (bus 00) >PCI: Transparent bridge - 0000:00:09.0 >Boot video device is 0000:01:00.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] >ACPI: PCI Interrupt Link [LNK1] (IRQs 4 5 7 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK2] (IRQs 4 5 7 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK3] (IRQs 4 *5 7 10 11) >ACPI: PCI Interrupt Link [LNK4] (IRQs 4 5 7 *10 11) >ACPI: PCI Interrupt Link [LNK5] (IRQs 4 5 7 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LUBA] (IRQs 4 *5 7 10 11) >ACPI: PCI Interrupt Link [LUBB] (IRQs 4 5 7 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LMAC] (IRQs *4 5 7 10 11) >ACPI: PCI Interrupt Link [LACI] (IRQs 4 5 *7 10 11) >ACPI: PCI Interrupt Link [LMCI] (IRQs 4 5 7 10 *11) >ACPI: PCI Interrupt Link [LSMB] (IRQs *4 5 7 10 11) >ACPI: PCI Interrupt Link [LUB2] (IRQs 4 5 *7 10 11) >ACPI: PCI Interrupt Link [LIDE] (IRQs 4 5 7 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LSID] (IRQs 4 5 7 *10 11) >ACPI: PCI Interrupt Link [LFID] (IRQs 4 5 7 10 *11) >ACPI: PCI Interrupt Link [LPCA] (IRQs 4 5 7 10 11) *0, disabled. >ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. >ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. >ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 >ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 >ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. >ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. >ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. >ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 >ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >pnp: PnP ACPI: found 12 devices >SCSI subsystem initialized >libata version 2.20 loaded. >usbcore: registered new interface driver usbfs >usbcore: registered new interface driver hub >usbcore: registered new device driver usb >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >pnp: 00:00: ioport range 0x1000-0x107f has been reserved >pnp: 00:00: ioport range 0x1080-0x10ff has been reserved >pnp: 00:00: ioport range 0x1400-0x147f has been reserved >pnp: 00:00: ioport range 0x1480-0x14ff has been reserved >pnp: 00:00: ioport range 0x1800-0x187f has been reserved >pnp: 00:00: ioport range 0x1880-0x18ff has been reserved >pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved >pnp: 00:0b: iomem range 0xd6c00-0xd7fff has been reserved >pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved >pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved >pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved >ieee1394: Initialized config rom entry `ip1394' >ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 >ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] >PCI: Bridge: 0000:00:09.0 > IO window: 9000-9fff > MEM window: fdf00000-fdffffff > PREFETCH window: fde00000-fdefffff >PCI: Bridge: 0000:00:0b.0 > IO window: 6000-6fff > MEM window: fda00000-fdafffff > PREFETCH window: fd900000-fd9fffff >PCI: Bridge: 0000:00:0c.0 > IO window: 7000-7fff > MEM window: fdc00000-fdcfffff > PREFETCH window: fdb00000-fdbfffff >PCI: Bridge: 0000:00:0d.0 > IO window: 8000-8fff > MEM window: fd800000-fd8fffff > PREFETCH window: fdd00000-fddfffff >PCI: Bridge: 0000:00:0e.0 > IO window: a000-afff > MEM window: f4000000-fbffffff > PREFETCH window: d8000000-dfffffff >PCI: Setting latency timer of device 0000:00:09.0 to 64 >PCI: Setting latency timer of device 0000:00:0b.0 to 64 >PCI: Setting latency timer of device 0000:00:0c.0 to 64 >PCI: Setting latency timer of device 0000:00:0d.0 to 64 >PCI: Setting latency timer of device 0000:00:0e.0 to 64 >NET: Registered protocol family 2 >Time: acpi_pm clocksource has been installed. >IP route cache hash table entries: 65536 (order: 7, 524288 bytes) >TCP established hash table entries: 131072 (order: 9, 3145728 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 131072 bind 65536) >TCP reno registered >checking if image is initramfs... it is >Freeing initrd memory: 1359k freed >squashfs: version 3.2 (2007/01/02) Phillip Lougher >NTFS driver 2.1.28 [Flags: R/O]. >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered (default) >io scheduler cfq registered >PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 >PCI: Found enabled HT MSI Mapping on 0000:00:00.0 >PCI: Linking AER extended capability on 0000:00:0b.0 >PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 >PCI: Found enabled HT MSI Mapping on 0000:00:00.0 >PCI: Linking AER extended capability on 0000:00:0c.0 >PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 >PCI: Found enabled HT MSI Mapping on 0000:00:00.0 >PCI: Linking AER extended capability on 0000:00:0d.0 >PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 >PCI: Found enabled HT MSI Mapping on 0000:00:00.0 >PCI: Linking AER extended capability on 0000:00:0e.0 >PCI: Setting latency timer of device 0000:00:0b.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0b.0:pcie00] >Allocate Port Service[0000:00:0b.0:pcie03] >PCI: Setting latency timer of device 0000:00:0c.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0c.0:pcie00] >Allocate Port Service[0000:00:0c.0:pcie03] >PCI: Setting latency timer of device 0000:00:0d.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0d.0:pcie00] >Allocate Port Service[0000:00:0d.0:pcie03] >PCI: Setting latency timer of device 0000:00:0e.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0e.0:pcie00] >Allocate Port Service[0000:00:0e.0:pcie03] >Real Time Clock Driver v1.12ac >Linux agpgart interface v0.102 (c) Dave Jones >vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using 5120k, total 131072k >vesafb: mode is 1280x1024x16, linelength=2560, pages=1 >vesafb: scrolling: redraw >vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >Console: switching to colour frame buffer device 160x64 >fbsplash: console 0 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 0 >fb0: VESA VGA frame buffer device >Floppy drive(s): fd0 is 1.44M >FDC 0 is a post-1991 82077 >RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize >loop: loaded (max 8 devices) >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 >NFORCE-CK804: chipset revision 162 >NFORCE-CK804: not 100% native mode: will probe irqs later >NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller > ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA >Probing IDE interface ide0... >hda: Maxtor 6L200R0, ATA DISK drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000d6c84d] >hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive >hdd: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive >ide1 at 0x170-0x177,0x376 on irq 15 >hda: max request size: 512KiB >hda: 398297088 sectors (203928 MB) w/16384KiB Cache, CHS=24792/255/63, UDMA(133) >hda: cache flushes supported > hda: hda1 hda2 hda3 < hda5 > >hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 >hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) >sata_nv 0000:00:07.0: version 3.3 >ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 >ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23 >sata_nv 0000:00:07.0: Using ADMA mode >PCI: Setting latency timer of device 0000:00:07.0 to 64 >ata1: SATA max UDMA/133 cmd 0xffffc20000072480 ctl 0xffffc200000724a0 bmdma 0x000000000001d400 irq 23 >ata2: SATA max UDMA/133 cmd 0xffffc20000072580 ctl 0xffffc200000725a0 bmdma 0x000000000001d408 irq 23 >scsi0 : sata_nv >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 >ata1.00: 145226112 sectors, multi 16: LBA48 >ata1.00: configured for UDMA/133 >scsi1 : sata_nv >ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata2.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133 >ata2.00: 145226112 sectors, multi 16: LBA48 >ata2.00: configured for UDMA/133 >scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 >ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 >sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 < > >sd 0:0:0:0: [sda] Attached SCSI disk >sd 0:0:0:0: Attached scsi generic sg0 type 0 >scsi 1:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5 >ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 >sd 1:0:0:0: [sdb] 145226112 512-byte hardware sectors (74356 MB) >sd 1:0:0:0: [sdb] Write Protect is off >sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 1:0:0:0: [sdb] 145226112 512-byte hardware sectors (74356 MB) >sd 1:0:0:0: [sdb] Write Protect is off >sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdb: unknown partition table >sd 1:0:0:0: [sdb] Attached SCSI disk >sd 1:0:0:0: Attached scsi generic sg1 type 0 >ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 >ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22 >sata_nv 0000:00:08.0: Using ADMA mode >PCI: Setting latency timer of device 0000:00:08.0 to 64 >ata3: SATA max UDMA/133 cmd 0xffffc20000074480 ctl 0xffffc200000744a0 bmdma 0x000000000001e800 irq 22 >ata4: SATA max UDMA/133 cmd 0xffffc20000074580 ctl 0xffffc200000745a0 bmdma 0x000000000001e808 irq 22 >scsi2 : sata_nv >ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >ata3.00: ATA-7: WDC WD5000YS-01MPB0, 07.02E07, max UDMA/133 >ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >ata3.00: configured for UDMA/133 >scsi3 : sata_nv >ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata4.00: ATA-7: Maxtor 7L300S0, BACE1G20, max UDMA/133 >ata4.00: 586114704 sectors, multi 16: LBA48 NCQ (depth 31/32) >ata4.00: configured for UDMA/133 >scsi 2:0:0:0: Direct-Access ATA WDC WD5000YS-01M 07.0 PQ: 0 ANSI: 5 >ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 >sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) >sd 2:0:0:0: [sdc] Write Protect is off >sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 >sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) >sd 2:0:0:0: [sdc] Write Protect is off >sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 >sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 sdc9 > >sd 2:0:0:0: [sdc] Attached SCSI disk >sd 2:0:0:0: Attached scsi generic sg2 type 0 >scsi 3:0:0:0: Direct-Access ATA Maxtor 7L300S0 BACE PQ: 0 ANSI: 5 >ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 >sd 3:0:0:0: [sdd] 586114704 512-byte hardware sectors (300091 MB) >sd 3:0:0:0: [sdd] Write Protect is off >sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 >sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 3:0:0:0: [sdd] 586114704 512-byte hardware sectors (300091 MB) >sd 3:0:0:0: [sdd] Write Protect is off >sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 >sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 > >sd 3:0:0:0: [sdd] Attached SCSI disk >sd 3:0:0:0: Attached scsi generic sg3 type 0 >Fusion MPT base driver 3.04.04 >Copyright (c) 1999-2007 LSI Logic Corporation >Fusion MPT SPI Host driver 3.04.04 >video1394: Installed video1394 module >usbcore: registered new interface driver libusual >PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >serio: i8042 AUX port at 0x60,0x64 irq 12 >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard as /class/input/input0 >i2c /dev entries driver >md: raid0 personality registered for level 0 >md: raid1 personality registered for level 1 >md: raid10 personality registered for level 10 >device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com >Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC). >ALSA device list: > No soundcards found. >TCP cubic registered >NET: Registered protocol family 1 >NET: Registered protocol family 10 >NET: Registered protocol family 17 >Freeing unused kernel memory: 252k freed >input: PS2++ Logitech MX Mouse as /class/input/input1 >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >EXT3 FS on dm-7, internal journal >EXT3 FS on dm-7, internal journal >ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 >ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:04.0 to 64 >intel8x0_measure_ac97_clock: measured 50807 usecs >intel8x0: clocking to 46749 >forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. >ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 >ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 >PCI: Setting latency timer of device 0000:00:0a.0 to 64 >forcedeth: using HIGHDMA >eth0: forcedeth.c: subsystem: 0147b:1c12 bound to 0000:00:0a.0 >tun: Universal TUN/TAP device driver, 1.6 >tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> >abituguru: testing bank1 sensor 0 >abituguru: alarm not raised during volt sensor test >abituguru: found temp sensor >abituguru: testing bank1 sensor 1 >abituguru: alarm not raised during volt sensor test >abituguru: found temp sensor >abituguru: testing bank1 sensor 3 >abituguru: found volt sensor >abituguru: testing bank1 sensor 4 >abituguru: found volt sensor >abituguru: testing bank1 sensor 10 >abituguru: found volt sensor >abituguru: testing bank1 sensor 8 >abituguru: found volt sensor >abituguru: testing bank1 sensor 14 >abituguru: found volt sensor >abituguru: testing bank1 sensor 2 >abituguru: found volt sensor >abituguru: testing bank1 sensor 9 >abituguru: found volt sensor >abituguru: testing bank1 sensor 6 >abituguru: found volt sensor >abituguru: testing bank1 sensor 5 >abituguru: found volt sensor >abituguru: testing bank1 sensor 11 >abituguru: found volt sensor >abituguru: testing bank1 sensor 15 >abituguru: alarm not raised during volt sensor test >abituguru: found temp sensor >abituguru: testing bank1 sensor 13 >abituguru: found volt sensor >abituguru: testing bank1 sensor 7 >abituguru: alarm not raised during volt sensor test >abituguru: alarm not raised during temp sensor test >abituguru: testing bank1 sensor 12 >abituguru: alarm not raised during volt sensor test >abituguru: alarm not raised during temp sensor test >abituguru: detecting number of fan sensors >abituguru: found: 6 fan sensors >abituguru: detecting number of PWM outputs >abituguru: pwm channel 1 does not seem to be a pwm channel: setting 1 (21) is below the minimum value (170) >abituguru: found: 1 PWM outputs >abituguru: found Abit uGuru >ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver >ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 >ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:02.0 to 64 >ohci_hcd 0000:00:02.0: OHCI Host Controller >ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 >ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02a000 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 10 ports detected >USB Universal Host Controller Interface driver v3.0 >ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 >ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:02.1 to 64 >ehci_hcd 0000:00:02.1: EHCI Host Controller >ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 >ehci_hcd 0000:00:02.1: debug port 1 >PCI: cache line size of 64 is not supported by device 0000:00:02.1 >ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe029000 >ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 10 ports detected >SGI XFS with ACLs, large block/inode numbers, no debug enabled >i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 >i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 >input: Power Button (FF) as /class/input/input2 >ACPI: Power Button (FF) [PWRF] >input: Power Button (CM) as /class/input/input3 >ACPI: Power Button (CM) [PWRB] >lirc_dev: IR Remote Control driver registered, at major 61 >lirc_i2c: no version for "lirc_unregister_plugin" found: kernel tainted. >Linux video capture interface: v2.00 >usb 2-3: new high speed USB device using ehci_hcd and address 3 >usb 2-3: configuration #1 chosen from 1 choice >hub 2-3:1.0: USB hub found >hub 2-3:1.0: 2 ports detected >usb 2-6: new high speed USB device using ehci_hcd and address 4 >usb 2-6: configuration #1 chosen from 1 choice >usbcore: registered new interface driver pvrusb2 >drivers/media/video/pvrusb2/pvrusb2-main.c: Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner : V4L in-tree version >drivers/media/video/pvrusb2/pvrusb2-main.c: Debug mask is 15 (0xf) >md: md0 stopped. >md: bind<sdc1> >md: bind<hda1> >md0: setting max_sectors to 256, segment boundary to 65535 >raid0: looking at hda1 >raid0: comparing hda1(5234944) with hda1(5234944) >raid0: END >raid0: ==> UNIQUE >raid0: 1 zones >raid0: looking at sdc1 >raid0: comparing sdc1(5234944) with hda1(5234944) >raid0: EQUAL >raid0: FINAL 1 zones >raid0: done. >raid0 : md_size is 10469888 blocks. >raid0 : conf->hash_spacing is 10469888 blocks. >raid0 : nb_zone is 1. >raid0 : Allocating 8 bytes for hash. >md: md1 stopped. >md: bind<sdc2> >md: bind<hda2> >md1: setting max_sectors to 256, segment boundary to 65535 >raid0: looking at hda2 >raid0: comparing hda2(15736320) with hda2(15736320) >raid0: END >raid0: ==> UNIQUE >raid0: 1 zones >raid0: looking at sdc2 >raid0: comparing sdc2(15736320) with hda2(15736320) >raid0: EQUAL >raid0: FINAL 1 zones >raid0: done. >raid0 : md_size is 31472640 blocks. >raid0 : conf->hash_spacing is 31472640 blocks. >raid0 : nb_zone is 1. >raid0 : Allocating 8 bytes for hash. >usb 2-6: reset high speed USB device using ehci_hcd and address 4 >usb 1-1: new low speed USB device using ohci_hcd and address 2 >kjournald starting. Commit interval 30 seconds >EXT3-fs warning: maximal mount count reached, running e2fsck is recommended >EXT3 FS on md1, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >kjournald starting. Commit interval 30 seconds >EXT3 FS on dm-9, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >kjournald starting. Commit interval 30 seconds >EXT3-fs warning: maximal mount count reached, running e2fsck is recommended >EXT3 FS on dm-6, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >lirc_i2c: chip found @ 0x18 (Hauppauge IR) >lirc_dev: lirc_register_plugin: sample_rate: 10 >cx25840 2-0044: cx25843-23 found @ 0x88 (pvrusb2_a) >kjournald starting. Commit interval 30 seconds >EXT3 FS on sdc8, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended >kjournald starting. Commit interval 30 seconds >EXT3-fs warning: maximal mount count reached, running e2fsck is recommended >EXT3 FS on hda5, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >usb 1-1: configuration #1 chosen from 1 choice >kjournald starting. Commit interval 30 seconds >EXT3-fs warning: maximal mount count reached, running e2fsck is recommended >EXT3 FS on sdd5, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >kjournald starting. Commit interval 30 seconds >EXT3 FS on sdd7, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >Adding 1943824k swap on /dev/mapper/nvidia_afjdcbaf12. Priority:0 extents:1 across:1943824k >usb 2-3.1: new high speed USB device using ehci_hcd and address 5 >usb 2-3.1: configuration #1 chosen from 1 choice >hub 2-3.1:1.0: USB hub found >hub 2-3.1:1.0: 4 ports detected >usb 2-3.2: new high speed USB device using ehci_hcd and address 6 >usb 2-3.2: configuration #1 chosen from 1 choice >Initializing USB Mass Storage driver... >scsi4 : SCSI emulation for USB Mass Storage devices >usb-storage: device found at 6 >usb-storage: waiting for device to settle before scanning >usbcore: registered new interface driver usb-storage >USB Mass Storage support registered. >usbcore: registered new interface driver hiddev >hiddev96: USB HID v1.10 Device [APC Back-UPS ES 750 FW:819.z2.D USB FW:z2] on usb-0000:00:02.0-1 >usbcore: registered new interface driver usbhid >drivers/usb/input/hid-core.c: v2.6:USB HID core driver >cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) >tuner 2-0043: chip found @ 0x86 (pvrusb2_a) >tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) >tuner 2-0061: chip found @ 0xc2 (pvrusb2_a) >wm8775 2-001b: chip found @ 0x36 (pvrusb2_a) >tveeprom 2-00a2: Hauppauge model 24012, rev D3A3, serial# 8657148 >tveeprom 2-00a2: tuner model is TCL MFNM05-4 (idx 103, type 43) >tveeprom 2-00a2: TV standards NTSC(M) (eeprom 0x08) >tveeprom 2-00a2: audio processor is CX25843 (idx 37) >tveeprom 2-00a2: decoder processor is CX25843 (idx 30) >tveeprom 2-00a2: has radio, has IR receiver, has no IR transmitter >tuner 2-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) >cx25840 2-0044: Video signal: not present >cx25840 2-0044: Detected format: NTSC-M >cx25840 2-0044: Specified standard: PAL-M >cx25840 2-0044: Specified video input: Composite 7 >cx25840 2-0044: Specified audioclock freq: 48000 Hz >cx25840 2-0044: Detected audio mode: mono >cx25840 2-0044: Detected audio standard: no detected audio standard >cx25840 2-0044: Audio muted: yes >cx25840 2-0044: Audio microcontroller: running >cx25840 2-0044: Configured audio standard: automatic detection >cx25840 2-0044: Configured audio system: BTSC >cx25840 2-0044: Specified audio input: Tuner (In8) >cx25840 2-0044: Preferred audio mode: stereo >tda9887 2-0043: Data bytes: b=0x14 c=0x30 e=0x44 >tuner 2-0061: Tuner mode: analog TV >tuner 2-0061: Frequency: 175.25 MHz >tuner 2-0061: Standard: 0x00000100 >wm8775 2-001b: Input: 2 >pvrusb2: Device initialization completed successfully. >pvrusb2: registered device video0 [mpeg] >pvrusb2: registered device radio0 [mpeg] >scsi 4:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0 >sd 4:0:0:0: [sde] Attached SCSI removable disk >sd 4:0:0:0: Attached scsi generic sg4 type 0 >scsi 4:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0 >sd 4:0:0:1: [sdf] Attached SCSI removable disk >sd 4:0:0:1: Attached scsi generic sg5 type 0 >scsi 4:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0 >sd 4:0:0:2: [sdg] Attached SCSI removable disk >sd 4:0:0:2: Attached scsi generic sg6 type 0 >scsi 4:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0 >sd 4:0:0:3: [sdh] Attached SCSI removable disk >sd 4:0:0:3: Attached scsi generic sg7 type 0 >usb-storage: device scan complete >fbsplash: console 1 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 1 >fbsplash: console 2 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 2 >fbsplash: console 3 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 3 >fbsplash: console 4 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 4 >fbsplash: console 5 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 5 >fbsplash: console 6 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 6 >fbsplash: console 7 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 7 >fbsplash: console 8 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 8 >fbsplash: console 9 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 9 >fbsplash: console 10 using theme 'livecd-2007.0' >fbsplash: switched splash state to 'on' on console 10 >Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >nvidia: module license 'NVIDIA' taints kernel. >ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 >ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:01:00.0 to 64 >NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007 >usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 2 ret -110 >eth0: no IPv6 routers present
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 184852
: 124507 |
125486
|
125488