in-kernel alsa driver, as non-module.

dmesg-in_kerneal_alsa_driver_not_module (text/plain), 30.18 KB, created by John Stile on 2007-07-06 14:46:48 UTC

004000000 end: 00000000f4000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007deb0000 (usable)
 BIOS-e820: 000000007deb0000 - 000000007decd000 (ACPI data)
 BIOS-e820: 000000007decd000 - 000000007df00000 (ACPI NVS)
 BIOS-e820: 000000007df00000 - 000000007e000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1118MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6900
Entering add_active_range(0, 0, 515760) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   515760
early_node_map[1] active PFN ranges
    0:        0 ->   515760
On node 0 totalpages: 515760
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2237 pages used for memmap
  HighMem zone: 284147 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v002 LENOVO                                ) @ 0x000f68d0
ACPI: XSDT (v001 LENOVO TP-7L    0x00001090  LTP 0x00000000) @ 0x7debca72
ACPI: FADT (v003 LENOVO TP-7L    0x00001090 LNVO 0x00000001) @ 0x7debcc00
ACPI: SSDT (v001 LENOVO TP-7L    0x00001090 MSFT 0x03000000) @ 0x7debcdb4
ACPI: ECDT (v001 LENOVO TP-7L    0x00001090 LNVO 0x00000001) @ 0x7deccbfb
ACPI: TCPA (v002 LENOVO TP-7L    0x00001090 LNVO 0x00000001) @ 0x7deccc4d
ACPI: MADT (v001 LENOVO TP-7L    0x00001090 LNVO 0x00000001) @ 0x7deccc7f
ACPI: MCFG (v001 LENOVO TP-7L    0x00001090 LNVO 0x00000001) @ 0x7deccce7
ACPI: HPET (v001 LENOVO TP-7L    0x00001090 LNVO 0x00000001) @ 0x7deccd23
ACPI: SLIC (v001 LENOVO TP-7L    0x00001090  LTP 0x00000000) @ 0x7deccdf0
ACPI: BOOT (v001 LENOVO TP-7L    0x00001090  LTP 0x00000001) @ 0x7deccf66
ACPI: ASF! (v016 LENOVO TP-7L    0x00001090 PTL  0x00000001) @ 0x7deccf8e
ACPI: SSDT (v001 LENOVO TP-7L    0x00001090 INTL 0x20050513) @ 0x7dee26d9
ACPI: SSDT (v001 LENOVO TP-7L    0x00001090 INTL 0x20050513) @ 0x7dee2938
ACPI: SSDT (v001 LENOVO TP-7L    0x00001090 INTL 0x20050513) @ 0x7dee29de
ACPI: SSDT (v001 LENOVO TP-7L    0x00001090 INTL 0x20050513) @ 0x7dee2ed5
ACPI: DSDT (v001 LENOVO TP-7L    0x00001090 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: INTEL    Product ID: Napa ERB     APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
Detected 2194.609 MHz processor.
Built 1 zonelists.  Total pages: 511731
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda2  doscsi irqpoll noapic pci=routeirq
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c05bd000 soft=c059d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2037484k/2063040k available (3287k kernel code, 24384k reserved, 1145k data, 244k init, 1145536k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe17000 - 0xfffff000   (1952 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc055b000 - 0xc0598000   ( 244 kB)
      .data : 0xc0435f22 - 0xc0554474   (1145 kB)
      .text : 0xc0100000 - 0xc0435f22   (3287 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Using HPET for base-timer
Calibrating delay using timer specific routine.. 4400.14 BogoMIPS (lpj=22000701)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c05be000 soft=c059e000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4389.04 BogoMIPS (lpj=21945228)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0a
Total of 2 processors activated (8789.18 BogoMIPS).
checking TSC synchronization across 2 CPUs: 
CPU#0 had -91 usecs TSC skew, fixed it up.
CPU#1 had 91 usecs TSC skew, fixed it up.
Brought up 2 CPUs
migration_cost=14
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver 
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:19.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1b.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1c.4[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[C] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1f.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:15:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:15:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: d4000000-d6ffffff
  PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 3000-3fff
  MEM window: fc000000-fdffffff
  PREFETCH window: f8000000-f80fffff
PCI: Bridge: 0000:00:1c.1
  IO window: 4000-4fff
  MEM window: dc100000-df2fffff
  PREFETCH window: dfd00000-dfdfffff
PCI: Bridge: 0000:00:1c.2
  IO window: 5000-5fff
  MEM window: d8000000-d9ffffff
  PREFETCH window: dfa00000-dfafffff
PCI: Bridge: 0000:00:1c.3
  IO window: 6000-6fff
  MEM window: d0000000-d1ffffff
  PREFETCH window: df700000-df7fffff
PCI: Bridge: 0000:00:1c.4
  IO window: 7000-7fff
  MEM window: cc000000-cdffffff
  PREFETCH window: df400000-df4fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
  IO window: 00008000-000080ff
  IO window: 00008400-000084ff
  PREFETCH window: f4000000-f7ffffff
  MEM window: 80000000-83ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 8000-bfff
  MEM window: f8100000-fbffffff
  PREFETCH window: f4000000-f7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:15:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1847k freed
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1183707435.830:1): initialized
highmem bounce pool size: 64 pages
squashfs: version 3.2 (2007/01/02) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jul  5 2007 16:16:52) installed
Lock_Nolock (built Jul  5 2007 16:16:54) installed
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
myri10ge: Version 1.2.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[C] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ICH8M: chipset revision 3
ICH8M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1830-0x1837, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-U10N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-724.
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input4
ALSA device list:
  #0: HDA Intel at 0xfe220000 irq 11
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 244k freed
Time: tsc clocksource has been installed.
Time: hpet clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 11, io mem 0xfe226c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfe227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usb 2-5: new high speed USB device using ehci_hcd and address 2
usb 2-5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 11, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input5
BUG: soft lockup detected on CPU#0!
 [<c0147540>] softlockup_tick+0xa3/0xb2
 [<c0128b3f>] update_process_times+0x3b/0x5e
 [<c0113d48>] smp_apic_timer_interrupt+0x72/0x82
 [<c01037c4>] apic_timer_interrupt+0x28/0x30
 [<c0124ce2>] __do_softirq+0x54/0xba
 [<c0105423>] do_softirq+0x59/0xa9
 [<c0113d4d>] smp_apic_timer_interrupt+0x77/0x82
 [<c01037c4>] apic_timer_interrupt+0x28/0x30
 [<c0435045>] _spin_unlock_irqrestore+0x8/0x9
 [<c0147e5a>] setup_irq+0x140/0x1b2
 [<f8865d55>] usb_hcd_irq+0x0/0x4e [usbcore]
 [<c0147f48>] request_irq+0x7c/0x98
 [<f8865a4a>] usb_add_hcd+0x28c/0x566 [usbcore]
 [<f886df51>] usb_hcd_pci_probe+0x261/0x32c [usbcore]
 [<c0302a56>] pci_device_probe+0x36/0x57
 [<c0358f95>] really_probe+0x7f/0x103
 [<c035905d>] driver_probe_device+0x44/0xa5
 [<c0359136>] __driver_attach+0x0/0x79
 [<c035917c>] __driver_attach+0x46/0x79
 [<c0358674>] bus_for_each_dev+0x33/0x55
 [<c0358e5b>] driver_attach+0x16/0x18
 [<c0359136>] __driver_attach+0x0/0x79
 [<c0358936>] bus_add_driver+0x5e/0x15f
 [<c0302baf>] __pci_register_driver+0x64/0x90
 [<f881d078>] uhci_hcd_init+0x78/0x99 [uhci_hcd]
 [<c0139ff7>] sys_init_module+0x1770/0x18b7
 [<c0163bcd>] do_sync_read+0xc7/0x10a
 [<c0164b6b>] __fput+0x112/0x13c
 [<c0102cf6>] sysenter_past_esp+0x5f/0x85
 =======================
irq 10: nobody cared (try booting with the "irqpoll" option)
 [<c014805e>] __report_bad_irq+0x36/0x7d
 [<c014824e>] note_interrupt+0x1a9/0x1e7
 [<c0148b1f>] handle_level_irq+0xa3/0xd8
 [<c0148a7c>] handle_level_irq+0x0/0xd8
 [<c0105501>] do_IRQ+0x8e/0xb9
 [<c0103707>] common_interrupt+0x23/0x28
 [<c0124ce2>] __do_softirq+0x54/0xba
 [<c0105423>] do_softirq+0x59/0xa9
 [<c0113d4d>] smp_apic_timer_interrupt+0x77/0x82
 [<c01037c4>] apic_timer_interrupt+0x28/0x30
 [<c0435045>] _spin_unlock_irqrestore+0x8/0x9
 [<c0147e5a>] setup_irq+0x140/0x1b2
 [<f8865d55>] usb_hcd_irq+0x0/0x4e [usbcore]
 [<c0147f48>] request_irq+0x7c/0x98
 [<f8865a4a>] usb_add_hcd+0x28c/0x566 [usbcore]
 [<f886df51>] usb_hcd_pci_probe+0x261/0x32c [usbcore]
 [<c0302a56>] pci_device_probe+0x36/0x57
 [<c0358f95>] really_probe+0x7f/0x103
 [<c035905d>] driver_probe_device+0x44/0xa5
 [<c0359136>] __driver_attach+0x0/0x79
 [<c035917c>] __driver_attach+0x46/0x79
 [<c0358674>] bus_for_each_dev+0x33/0x55
 [<c0358e5b>] driver_attach+0x16/0x18
 [<c0359136>] __driver_attach+0x0/0x79
 [<c0358936>] bus_add_driver+0x5e/0x15f
 [<c0302baf>] __pci_register_driver+0x64/0x90
 [<f881d078>] uhci_hcd_init+0x78/0x99 [uhci_hcd]
 [<c0139ff7>] sys_init_module+0x1770/0x18b7
 [<c0163bcd>] do_sync_read+0xc7/0x10a
 [<c0164b6b>] __fput+0x112/0x13c
 [<c0102cf6>] sysenter_past_esp+0x5f/0x85
 =======================
handlers:
[<f8865d55>] (usb_hcd_irq+0x0/0x4e [usbcore])
Disabling IRQ #10
uhci_hcd 0000:00:1d.0: irq 10, io base 0x000018a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018c0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 11, io base 0x000018e0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:15:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:15:00.1 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[f8101000-f81017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
libata version 2.00 loaded.
ahci 0000:00:1f.2: version 2.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
ata1: SATA max UDMA/133 cmd 0xF88EA100 ctl 0x0 bmdma 0x0 irq 217
scsi0 : ahci
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b032a10281d]
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      HTE721010G9SA00  MCZO PQ: 0 ANSI: 5
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
JFS: nTxBlock = 8192, nTxLock = 65536
Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1a:6b:36:30:49
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
sd 0:0:0:0: Attached scsi generic sg0 type 0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
input: PC Speaker as /class/input/input6
ACPI: PCI Interrupt 0000:00:1f.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (0.9.3.1)
ath_pci: no version for "ieee80211_encap" found: kernel tainted.
ath_pci: 0.9.4.5 (0.9.3.1)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:03:00.0 to 64
ath_rate_sample: 1.2 (0.9.3.1)
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.3 phy 6.1 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xdf2f0000, irq=11
Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
Yenta: ISA IRQ mask 0x00b8, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
cs: IO port probe 0x8000-0xbfff: clean.
pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
Linux video capture interface: v2.00
uvcvideo: disagrees about version of symbol struct_module
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
cs: IO port probe 0x100-0x4ff: excluding 0x3b0-0x3df 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
ibm_acpi: ThinkPad EC firmware 7KHT21WW-1.05
ibm_acpi: IBM ThinkPad ACPI Extras v0.13
ibm_acpi: http://ibm-acpi.sf.net/
tp_base: disagrees about version of symbol struct_module
tp_smapi: disagrees about version of symbol struct_module
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1028152k swap on /dev/sda3.  Priority:-1 extents:1 across:1028152k
Real Time Clock Driver v1.12ac
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): ath0: link is not ready
ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
ath0: no IPv6 routers present
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized