Attachment 124040 Details for Bug 184411 – dmesg output, just after plugging in the disk

dmesg output, just after plugging in the disk

dmesg.output (text/plain), 30.53 KB, created by Michael Elbaum on 2007-07-06 12:25:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Elbaum

Created: 2007-07-06 12:25:24 UTC

Size: 30.53 KB

patch

obsolete

>00097) @ 0x3ffc0390
>[    0.000000] ACPI: MCFG (v001 A M I  OEMMCFG  0x02000706 MSFT 0x00000097) @ 0x3ffc0400
>[    0.000000] ACPI: OEMB (v001 A M I  AMI_OEM  0x02000706 MSFT 0x00000097) @ 0x3ffce040
>[    0.000000] ACPI: EPTH (v001 A M I  OEMHPET  0x02000706 MSFT 0x00000097) @ 0x3ffc45a0
>[    0.000000] ACPI: DSDT (v001  1ADKN 1ADKN018 0x00000018 INTL 0x20051117) @ 0x00000000
>[    0.000000] ATI board detected. Disabling timer routing over 8254.
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] Processor #0 6:15 APIC version 20
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] Processor #1 6:15 APIC version 20
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
>[    0.000000] Detected 2039.350 MHz processor.
>[   16.766328] Built 1 zonelists.  Total pages: 260033
>[   16.766332] Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda6 udev
>[   16.766572] mapped APIC to ffffd000 (fee00000)
>[   16.766574] mapped IOAPIC to ffffc000 (fec00000)
>[   16.766577] Enabling fast FPU save and restore... done.
>[   16.766580] Enabling unmasked SIMD FPU exception support... done.
>[   16.766593] Initializing CPU#0
>[   16.766677] PID hash table entries: 4096 (order: 12, 16384 bytes)
>[   16.767806] Speakup v-2.00 CVS: Sat Oct 7 10:52:29 EDT 2006 : initialized
>[   16.768179] Console: colour VGA+ 80x25
>[   16.771639] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[   16.772194] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[   16.795277] Memory: 1028236k/1048320k available (5981k kernel code, 19356k reserved, 2312k data, 520k init, 130816k highmem)
>[   16.795344] virtual kernel memory layout:
>[   16.795345]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
>[   16.795346]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[   16.795347]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>[   16.795347]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>[   16.795348]       .init : 0xc0923000 - 0xc09a5000   ( 520 kB)
>[   16.795349]       .data : 0xc06d7519 - 0xc091970c   (2312 kB)
>[   16.795350]       .text : 0xc0100000 - 0xc06d7519   (5981 kB)
>[   16.795732] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>[   16.855794] Calibrating delay using timer specific routine.. 4177.98 BogoMIPS (lpj=2088991)
>[   16.855918] Security Framework v1.0.0 initialized
>[   16.855968] SELinux:  Initializing.
>[   16.856024] SELinux:  Starting in permissive mode
>[   16.856075] selinux_register_security:  Registering secondary module capability
>[   16.856132] Capability LSM initialized as secondary
>[   16.856190] Mount-cache hash table entries: 512
>[   16.856325] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
>[   16.856331] monitor/mwait feature present.
>[   16.856380] using mwait in idle threads.
>[   16.856429] CPU: L1 I cache: 32K, L1 D cache: 32K
>[   16.856515] CPU: L2 cache: 2048K
>[   16.856562] CPU: Physical Processor ID: 0
>[   16.856610] CPU: Processor Core ID: 0
>[   16.856658] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
>[   16.856663] Intel machine check architecture supported.
>[   16.856725] Intel machine check reporting enabled on CPU#0.
>[   16.856776] Compat vDSO mapped to ffffe000.
>[   16.856832] Checking 'hlt' instruction... OK.
>[   16.862465] SMP alternatives: switching to UP code
>[   16.863009] ACPI: Core revision 20060707
>[   16.866982] CPU0: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
>[   16.867131] SMP alternatives: switching to SMP code
>[   16.867215] Booting processor 1/1 eip 3000
>[   16.883970] Initializing CPU#1
>[   16.944020] Calibrating delay using timer specific routine.. 3575.48 BogoMIPS (lpj=1787740)
>[   16.944025] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
>[   16.944029] monitor/mwait feature present.
>[   16.944033] CPU: L1 I cache: 32K, L1 D cache: 32K
>[   16.944034] CPU: L2 cache: 2048K
>[   16.944036] CPU: Physical Processor ID: 0
>[   16.944037] CPU: Processor Core ID: 1
>[   16.944039] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
>[   16.944043] Intel machine check architecture supported.
>[   16.944046] Intel machine check reporting enabled on CPU#1.
>[   16.944409] CPU1: Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
>[   16.944983] Total of 2 processors activated (7753.46 BogoMIPS).
>[   16.945178] ENABLING IO-APIC IRQs
>[   16.945404] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>[   17.059609] checking TSC synchronization across 2 CPUs: passed.
>[    0.000840] Brought up 2 CPUs
>[    0.407872] migration_cost=6144
>[    0.408291] NET: Registered protocol family 16
>[    0.408474] No dock devices found.
>[    0.408528] EISA bus registered
>[    0.408577] ACPI: bus type pci registered
>[    0.408631] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>[    0.408681] PCI: Not using MMCONFIG.
>[    0.408869] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
>[    0.408919] PCI: Using configuration type 1
>[    0.408967] Setting up standard PCI resources
>[    0.426886] ACPI: Interpreter enabled
>[    0.426936] ACPI: Using IOAPIC for interrupt routing
>[    0.427460] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.427511] PCI: Probing PCI hardware (bus 00)
>[    0.428572] Boot video device is 0000:01:00.0
>[    0.428819] PCI: Transparent bridge - 0000:00:14.4
>[    0.428899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.453637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>[    0.456166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>[    0.457581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>[    0.458321] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>[    0.459059] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>[    0.459798] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>[    0.460536] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>[    0.461269] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>[    0.461701] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>[    0.462437] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>[    0.463074] Linux Plug and Play Support v0.97 (c) Adam Belay
>[    0.463134] pnp: PnP ACPI init
>[    0.467450] pnp: PnP ACPI: found 16 devices
>[    0.467500] PnPBIOS: Disabled by ACPI PNP
>[    0.467686] SCSI subsystem initialized
>[    0.467760] libata version 2.00 loaded.
>[    0.467818] usbcore: registered new interface driver usbfs
>[    0.467892] usbcore: registered new interface driver hub
>[    0.467971] usbcore: registered new device driver usb
>[    0.468052] PCI: Using ACPI for IRQ routing
>[    0.468100] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>[    0.468165] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
>[    0.475411] NetLabel: Initializing
>[    0.475459] NetLabel:  domain hash size = 128
>[    0.475510] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.475569] NetLabel:  unlabeled traffic allowed by default
>[    0.476531] pnp: 00:0c: ioport range 0xa00-0xa7f has been reserved
>[    0.476602] ieee1394: Initialized config rom entry `ip1394'
>[    0.476696] PCI: Bridge: 0000:00:02.0
>[    0.476744]   IO window: a000-afff
>[    0.476794]   MEM window: fa900000-fe9fffff
>[    0.476843]   PREFETCH window: bff00000-dfefffff
>[    0.476895] PCI: Bridge: 0000:00:14.4
>[    0.476944]   IO window: b000-bfff
>[    0.476996]   MEM window: fea00000-feafffff
>[    0.477046]   PREFETCH window: 50000000-500fffff
>[    0.477107] PCI: Setting latency timer of device 0000:00:02.0 to 64
>[    0.477135] NET: Registered protocol family 2
>[    0.488188] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.488366] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.489175] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.489617] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.489668] TCP reno registered
>[    0.497482] checking if image is initramfs... it is
>[    0.582496] Freeing initrd memory: 971k freed
>[    0.582925] Machine check exception polling timer started.
>[    0.583270] audit: initializing netlink socket (disabled)
>[    0.583337] audit(1183729132.053:1): initialized
>[    0.583446] highmem bounce pool size: 64 pages
>[    0.583495] Total HugeTLB memory allocated, 0
>[    0.583613] VFS: Disk quotas dquot_6.5.1
>[    0.583679] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.583808] squashfs: version 3.2 (2007/01/02) Phillip Lougher
>[    0.583871] Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu
>[    0.584161] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.584399] NTFS driver 2.1.28 [Flags: R/W].
>[    0.584481] QNX4 filesystem 0.2.3 registered.
>[    0.584530] fuse init (API version 7.8)
>[    0.584639] JFS: nTxBlock = 8043, nTxLock = 64346
>[    0.591031] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>[    0.594128] SGI XFS Quota Management subsystem
>[    0.594230] SELinux:  Registering netfilter hooks
>[    0.601676] io scheduler noop registered
>[    0.601762] io scheduler anticipatory registered
>[    0.601848] io scheduler deadline registered
>[    0.601944] io scheduler cfq registered (default)
>[    0.702081] PCI: Setting latency timer of device 0000:00:02.0 to 64
>[    0.702110] assign_interrupt_mode Found MSI capability
>[    0.702197] Allocate Port Service[0000:00:02.0:pcie00]
>[    0.725232] lp: driver loaded but no devices found
>[    0.725358] Real Time Clock Driver v1.12ac
>[    0.725459] toshiba: not a supported Toshiba laptop
>[    0.729509] ppdev: user-space parallel port driver
>[    0.729591] initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
>[    0.729659] Linux agpgart interface v0.101 (c) Dave Jones
>[    0.748639] vesafb: NVIDIA Corporation, G73 Board - p345h0  , Chip Rev    (OEM: NVIDIA)
>[    0.748698] vesafb: VBE version: 3.0
>[    0.780475] vesafb: protected mode interface info at c000:c9d0
>[    0.780524] vesafb: pmi: set display start = c00cca06, set palette = c00cca70
>[    0.780574] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>[    0.785993] vesafb: VBIOS/hardware supports DDC2 transfers
>[    0.883778] vesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 140 MHz
>[    0.883837] vesafb: scrolling: redraw
>[    1.138703] Console: switching to colour frame buffer device 128x48
>[    1.145832] vesafb: framebuffer at 0xc0000000, mapped to 0xf8d00000, using 6144k, total 262144k
>[    1.145942] fb0: VESA VGA frame buffer device
>[    1.146089] input: Power Button (FF) as /class/input/input0
>[    1.146167] ACPI: Power Button (FF) [PWRF]
>[    1.146288] input: Power Button (CM) as /class/input/input1
>[    1.146363] ACPI: Power Button (CM) [PWRB]
>[    1.146484] Using specific hotkey driver
>[    1.146570] ACPI: duty_cycle spans bit 4
>[    1.146810] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
>[    1.146987] ACPI: duty_cycle spans bit 4
>[    1.147180] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
>[    1.147335] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>[    1.147466] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>[    1.150631] ibm_acpi: ec object not found
>[    1.150700] isapnp: Scanning for PnP cards...
>[    1.425284] isapnp: No Plug & Play device found
>[    1.425346] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>[    1.425573] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.428378] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    1.431364] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.434058] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    1.436672] parport: PnPBIOS parport detected.
>[    1.439199] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>[    1.516554] lp0: using parport0 (interrupt-driven).
>[    1.533139] FDC 0 is a post-1991 82077
>[    1.536897] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>[    1.539753] loop: loaded (max 8 devices)
>[    1.542197] Compaq SMART2 Driver (v 2.6.0)
>[    1.544841] HP CISS Driver (v 3.6.14)
>[    1.547567] v2.3 : Micro Memory(tm) PCI memory board block driver
>[    1.550227] MM: desc_per_page = 128
>[    1.553404] Loading iSCSI transport class v2.0-724.
>[    1.556108] iscsi: registered transport (tcp)
>[    1.558868] Loading Adaptec I2O RAID: Version 2.4 Build 5go
>[    1.561455] Detecting Adaptec I2O RAID controllers...
>[    1.564392] Adaptec aacraid driver (1.1-5[2423]-mh3)
>[    1.567153] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded
>[    1.569899] NCR53c406a: no available ports found
>[    1.572365] sym53c416.c: Version 1.0.0-ac
>[    1.574810] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
>[    1.580203] iscsi: registered transport (qla4xxx)
>[    1.582892] QLogic iSCSI HBA Driver
>[    1.585497] Emulex LightPulse Fibre Channel SCSI driver 8.1.11
>[    1.588097] Copyright(c) 2004-2006 Emulex.  All rights reserved.
>[    1.590816] seagate: ST0x/TMC-8xx not detected.
>[    1.612717] Failed initialization of WD-7000 SCSI card!
>[    1.615317] IBM MCA SCSI: Version 4.0b-ac
>[    1.617891] IBM MCA SCSI:  No Microchannel-bus present --> Aborting.
>[    1.617893]       	     This machine does not have any IBM MCA-bus
>[    1.617894]     	     or the MCA-Kernel-support is not enabled!
>[    2.015152] DC390: clustering now enabled by default. If you get problems load
>[    2.015154] 	with "disable_clustering=1" and report to maintainers
>[    2.020393] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>[    2.022988] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
>[    2.025644] megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
>[    2.028274] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    2.030929] GDT-HA: Found 0 PCI Storage RAID Controllers
>[    2.033557] 3ware Storage Controller device driver for Linux v1.26.02.002.
>[    2.036199] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
>[    2.038846] nsp32: loading...
>[    2.041422] ipr: IBM Power RAID SCSI Device Driver version: 2.3.0 (November 8, 2006)
>[    2.044133] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
>[    2.046902] stex: Promise SuperTrak EX Driver version: 3.1.0.1
>[    2.049677] st: Version 20070203, fixed bufsize 32768, s/g segs 256
>[    2.052438] osst :I: Tape driver with OnStream support version 0.99.4
>[    2.052439] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    2.057775] ahci 0000:00:12.0: version 2.0
>[    2.057800] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16
>[    2.944173] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>[    2.946925] ahci 0000:00:12.0: flags: 64bit ncq ilck led clo pmp pio slum part 
>[    2.949789] ata1: SATA max UDMA/133 cmd 0xF8CDAD00 ctl 0x0 bmdma 0x0 irq 16
>[    2.952680] ata2: SATA max UDMA/133 cmd 0xF8CDAD80 ctl 0x0 bmdma 0x0 irq 16
>[    2.955528] ata3: SATA max UDMA/133 cmd 0xF8CDAE00 ctl 0x0 bmdma 0x0 irq 16
>[    2.958321] ata4: SATA max UDMA/133 cmd 0xF8CDAE80 ctl 0x0 bmdma 0x0 irq 16
>[    2.961008] scsi2 : ahci
>[    3.368998] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.372142] ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 
>[    3.374824] ata1.00: ata1: dev 0 multi count 16
>[    3.377963] ata1.00: configured for UDMA/133
>[    3.380585] scsi3 : ahci
>[    3.650420] ata2: SATA link down (SStatus 0 SControl 300)
>[    3.653068] scsi4 : ahci
>[    3.922644] ata3: SATA link down (SStatus 0 SControl 300)
>[    3.925157] scsi5 : ahci
>[    4.196914] ata4: SATA link down (SStatus 0 SControl 300)
>[    4.199506] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
>[    4.202151] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>[    4.204724] sda: Write Protect is off
>[    4.207257] sda: Mode Sense: 00 3a 00 00
>[    4.207271] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.209963] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>[    4.212405] sda: Write Protect is off
>[    4.215020] sda: Mode Sense: 00 3a 00 00
>[    4.215033] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.217743]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>[    4.279001] sd 2:0:0:0: Attached scsi disk sda
>[    4.281743] sd 2:0:0:0: Attached scsi generic sg0 type 0
>[    4.284904] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
>[    4.287596] PCI: Setting latency timer of device 0000:00:14.1 to 64
>[    4.287728] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFF00 irq 14
>[    4.290413] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFF08 irq 15
>[    4.293056] scsi6 : pata_atiixp
>[    4.565727] ata5.00: ATAPI, max UDMA/66
>[    4.705930] ata5.00: configured for UDMA/66
>[    4.708152] scsi7 : pata_atiixp
>[    4.846481] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL00 PQ: 0 ANSI: 5
>[    4.852332] sr0: scsi3-mmc drive: 78x/78x writer dvd-ram cd/rw xa/form2 cdda tray
>[    4.854561] Uniform CD-ROM driver Revision: 3.20
>[    4.857030] sr 6:0:0:0: Attached scsi CD-ROM sr0
>[    4.857082] sr 6:0:0:0: Attached scsi generic sg1 type 5
>[    4.860435] I2O subsystem v1.325
>[    4.862908] i2o: max drivers = 8
>[    4.865517] I2O Configuration OSM v1.323
>[    4.867988] I2O Bus Adapter OSM v1.317
>[    4.870394] I2O Block Device OSM v1.325
>[    4.872795] I2O SCSI Peripheral OSM v1.316
>[    4.875110] I2O ProcFS OSM v1.316
>[    4.877377] Fusion MPT base driver 3.04.03
>[    4.879661] Copyright (c) 1999-2007 LSI Logic Corporation
>[    4.882006] Fusion MPT SPI Host driver 3.04.03
>[    4.884411] Fusion MPT FC Host driver 3.04.03
>[    4.886781] Fusion MPT SAS Host driver 3.04.03
>[    4.889127] Fusion MPT misc device (ioctl) driver 3.04.03
>[    4.891475] mptctl: Registered with Fusion MPT base driver
>[    4.893789] mptctl: /dev/mptctl @ (major,minor=10,220)
>[    4.896108] Fusion MPT LAN driver 3.04.03
>[    4.898481] usbcore: registered new interface driver usblp
>[    4.900818] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>[    4.903199] Initializing USB Mass Storage driver...
>[    4.905591] usbcore: registered new interface driver usb-storage
>[    4.907987] USB Mass Storage support registered.
>[    4.910452] usbcore: registered new interface driver libusual
>[    4.912875] usbcore: registered new interface driver hiddev
>[    4.915200] usbcore: registered new interface driver usbhid
>[    4.917453] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>[    4.919747] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    4.924510] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    4.926744] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    4.928902] parport0: cannot grant exclusive access for device parkbd
>[    4.929016] mice: PS/2 mouse device common for all mice
>[    4.954290] input: AT Translated Set 2 keyboard as /class/input/input2
>[    5.140474] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
>[    5.144534] md: linear personality registered for level -1
>[    5.146724] md: raid0 personality registered for level 0
>[    5.148887] md: raid1 personality registered for level 1
>[    5.151045] md: raid10 personality registered for level 10
>[    5.167442] raid6: int32x1    707 MB/s
>[    5.184232] raid6: int32x2    695 MB/s
>[    5.200991] raid6: int32x4    566 MB/s
>[    5.217807] raid6: int32x8    515 MB/s
>[    5.234503] raid6: mmxx1     2277 MB/s
>[    5.251275] raid6: mmxx2     2394 MB/s
>[    5.268052] raid6: sse1x1    1550 MB/s
>[    5.284783] raid6: sse1x2    1941 MB/s
>[    5.301546] raid6: sse2x1    2808 MB/s
>[    5.318317] raid6: sse2x2    2871 MB/s
>[    5.320144] raid6: using algorithm sse2x2 (2871 MB/s)
>[    5.321973] md: raid6 personality registered for level 6
>[    5.323823] md: raid5 personality registered for level 5
>[    5.325649] md: raid4 personality registered for level 4
>[    5.327452] raid5: automatically using best checksumming function: pIII_sse
>[    5.333307]    pIII_sse  :  6644.000 MB/sec
>[    5.335146] raid5: using function: pIII_sse (6644.000 MB/sec)
>[    5.337003] md: multipath personality registered for level -4
>[    5.338887] md: faulty personality registered for level -5
>[    5.340851] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>[    5.342965] EISA: Probing bus 0 at eisa.0
>[    5.344972] EISA: Detected 0 cards.
>[    5.346972] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    5.375494] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
>[    5.377664] specify port
>[    5.379685] snd_cs4231: probe of snd_cs4231.0 failed with error -22
>[    5.382071] ALSA device list:
>[    5.383838]   No soundcards found.
>[    5.385646] TCP bic registered
>[    5.387371] NET: Registered protocol family 1
>[    5.389238] NET: Registered protocol family 17
>[    5.393521] Starting balanced_irq
>[    5.395504] Using IPI No-Shortcut mode
>[    5.397604] ACPI: (supports S0 S1 S3 S4 S5)
>[    5.397715] Time: tsc clocksource has been installed.
>[    5.401487] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>[    5.403852] Freeing unused kernel memory: 520k freed
>[    5.485953] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 18
>[    5.485968] ehci_hcd 0000:00:13.5: EHCI Host Controller
>[    5.486024] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>[    5.486060] ehci_hcd 0000:00:13.5: debug port 1
>[    5.486073] ehci_hcd 0000:00:13.5: irq 18, io mem 0xfebff800
>[    5.486083] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[    5.486223] usb usb1: configuration #1 chosen from 1 choice
>[    5.486259] hub 1-0:1.0: USB hub found
>[    5.486267] hub 1-0:1.0: 10 ports detected
>[    5.602190] USB Universal Host Controller Interface driver v3.0
>[    5.621710] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>[    5.621767] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17
>[    5.621780] ohci_hcd 0000:00:13.0: OHCI Host Controller
>[    5.621827] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>[    5.621847] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000
>[    5.671003] usb usb2: configuration #1 chosen from 1 choice
>[    5.671038] hub 2-0:1.0: USB hub found
>[    5.671048] hub 2-0:1.0: 2 ports detected
>[    5.758618] usb 1-1: new high speed USB device using ehci_hcd and address 2
>[    5.759577] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19
>[    5.759585] ohci_hcd 0000:00:13.1: OHCI Host Controller
>[    5.759618] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>[    5.759631] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfd000
>[    5.808124] usb usb3: configuration #1 chosen from 1 choice
>[    5.808156] hub 3-0:1.0: USB hub found
>[    5.808165] hub 3-0:1.0: 2 ports detected
>[    5.860680] usb 1-1: configuration #1 chosen from 1 choice
>[    5.860749] hub 1-1:1.0: USB hub found
>[    5.860831] hub 1-1:1.0: 4 ports detected
>[    5.897733] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20
>[    5.897740] ohci_hcd 0000:00:13.2: OHCI Host Controller
>[    5.897774] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>[    5.897788] ohci_hcd 0000:00:13.2: irq 20, io mem 0xfebfc000
>[    5.946283] usb usb4: configuration #1 chosen from 1 choice
>[    5.946315] hub 4-0:1.0: USB hub found
>[    5.946324] hub 4-0:1.0: 2 ports detected
>[    6.034865] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19
>[    6.034872] ohci_hcd 0000:00:13.3: OHCI Host Controller
>[    6.034905] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>[    6.034916] ohci_hcd 0000:00:13.3: irq 19, io mem 0xfebfb000
>[    6.083421] usb usb5: configuration #1 chosen from 1 choice
>[    6.083453] hub 5-0:1.0: USB hub found
>[    6.083462] hub 5-0:1.0: 2 ports detected
>[    6.108715] usb 1-1.3: new low speed USB device using ehci_hcd and address 3
>[    6.173024] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20
>[    6.173032] ohci_hcd 0000:00:13.4: OHCI Host Controller
>[    6.173068] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>[    6.173078] ohci_hcd 0000:00:13.4: irq 20, io mem 0xfebfa000
>[    6.191191] usb 1-1.3: configuration #1 chosen from 1 choice
>[    6.194192] input: Logitech USB Trackball as /class/input/input4
>[    6.194272] input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:13.5-1.3
>[    6.221577] usb usb6: configuration #1 chosen from 1 choice
>[    6.221610] hub 6-0:1.0: USB hub found
>[    6.221620] hub 6-0:1.0: 2 ports detected
>[    6.331066] sl811: driver sl811-hcd, 19 May 2005
>[    6.352299] usb 1-1.2: new low speed USB device using ehci_hcd and address 4
>[    6.415248] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
>[    6.415251] Copyright (c) 1999-2006 Intel Corporation.
>[    6.434485] usb 1-1.2: configuration #1 chosen from 1 choice
>[    6.437418] input: USB-compliant keyboard as /class/input/input5
>[    6.437470] input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:13.5-1.2
>[    6.442453] input: USB-compliant keyboard as /class/input/input6
>[    6.442569] input,hiddev0: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:13.5-1.2
>[    7.512435] EXT3-fs: INFO: recovery required on readonly filesystem.
>[    7.512438] EXT3-fs: write access will be enabled during recovery.
>[    7.640129] kjournald starting.  Commit interval 5 seconds
>[    7.640141] EXT3-fs: recovery complete.
>[    7.640312] EXT3-fs: mounted filesystem with ordered data mode.
>[    9.592081] input: PC Speaker as /class/input/input7
>[    9.712435] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
>[    9.766228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    9.766246] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>[    9.808078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   10.269289] 8139too Fast Ethernet driver 0.9.28
>[   10.269384] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 23 (level, low) -> IRQ 21
>[   10.270343] eth0: RealTek RTL8139 at 0xf9304c00, 00:19:db:6b:12:dd, IRQ 21
>[   10.270345] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>[   10.273367] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>[   10.491975] nvidia: module license 'NVIDIA' taints kernel.
>[   10.751992] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 20
>[   10.752002] PCI: Setting latency timer of device 0000:01:00.0 to 64
>[   10.752240] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
>[   10.986267] EXT3 FS on sda6, internal journal
>[   11.179046] PPP generic driver version 2.4.2
>[   11.188134] NET: Registered protocol family 24
>[   11.334866] Adding 1951888k swap on /dev/sda3.  Priority:-1 extents:1 across:1951888k
>[   15.707013] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>[   19.094833] NET: Registered protocol family 10
>[   19.094930] lo: Disabled Privacy Extensions
>[   19.095060] Mobile IPv6
>[   28.796316] eth0: no IPv6 routers present
>[  247.937188] kjournald starting.  Commit interval 5 seconds
>[  247.937296] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>[  247.937656] EXT3 FS on sda5, internal journal
>[  247.937659] EXT3-fs: recovery complete.
>[  247.937812] EXT3-fs: mounted filesystem with ordered data mode.
>[  248.046427] NTFS volume version 3.1.
>[  248.046432] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
>[  248.046436] NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
>[  249.019041] UDF-fs: Partition marked readonly; forcing readonly mount
>[  249.051541] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'ANIME_NARUTO_1', timestamp 2007/05/26 00:37 (10b4)
>[  250.915896] kjournald starting.  Commit interval 5 seconds
>[  250.925029] EXT3 FS on sda2, internal journal
>[  250.925034] EXT3-fs: recovery complete.
>[  250.951053] EXT3-fs: mounted filesystem with ordered data mode.
>[  611.367533] hda-intel: Invalid position buffer, using LPIB read method instead.
>[ 5261.971644] usb 1-7: new high speed USB device using ehci_hcd and address 5
>[ 5262.075934] usb 1-7: configuration #1 chosen from 1 choice
>[ 5262.076336] scsi8 : SCSI emulation for USB Mass Storage devices
>[ 5262.076396] usb-storage: device found at 5
>[ 5262.076398] usb-storage: waiting for device to settle before scanning
>[ 5266.488057] usb-storage: device scan complete
>[ 5266.489485] scsi 8:0:0:0: Direct-Access     TOSHIBA  MK1031GAS        AA20 PQ: 0 ANSI: 0 CCS
>[ 5266.490791] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB)
>[ 5266.491342] sdb: Write Protect is off
>[ 5266.491344] sdb: Mode Sense: 00 14 00 00
>[ 5266.491347] sdb: assuming drive cache: write through
>[ 5266.492115] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB)
>[ 5266.492665] sdb: Write Protect is off
>[ 5266.492668] sdb: Mode Sense: 00 14 00 00
>[ 5266.492670] sdb: assuming drive cache: write through
>[ 5266.492672]  sdb: sdb1
>[ 5266.500789] sd 8:0:0:0: Attached scsi disk sdb
>[ 5266.500825] sd 8:0:0:0: Attached scsi generic sg2 type 0
>[ 5266.724661] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
>[ 5266.724682] ReiserFS: sdb1: using ordered data mode
>[ 5266.742647] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>[ 5266.743023] ReiserFS: sdb1: checking transaction log (sdb1)
>[ 5268.038837] ReiserFS: sdb1: replayed 5 transactions in 2 seconds
>[ 5268.519640] ReiserFS: sdb1: Using r5 hash to sort names

Actions: View

Attachments on bug 184411: 124038 | 124040 | 124042 | 124043 | 124044 | 124045 | 124078 | 124079 | 125504 | 125788 | 125919 | 126552 | 126554 | 126556