00097) @ 0x3ffc0390 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x02000706 MSFT 0x00000097) @ 0x3ffc0400 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x02000706 MSFT 0x00000097) @ 0x3ffce040 [ 0.000000] ACPI: EPTH (v001 A M I OEMHPET 0x02000706 MSFT 0x00000097) @ 0x3ffc45a0 [ 0.000000] ACPI: DSDT (v001 1ADKN 1ADKN018 0x00000018 INTL 0x20051117) @ 0x00000000 [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) [ 0.000000] Detected 2039.350 MHz processor. [ 16.766328] Built 1 zonelists. Total pages: 260033 [ 16.766332] Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda6 udev [ 16.766572] mapped APIC to ffffd000 (fee00000) [ 16.766574] mapped IOAPIC to ffffc000 (fec00000) [ 16.766577] Enabling fast FPU save and restore... done. [ 16.766580] Enabling unmasked SIMD FPU exception support... done. [ 16.766593] Initializing CPU#0 [ 16.766677] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 16.767806] Speakup v-2.00 CVS: Sat Oct 7 10:52:29 EDT 2006 : initialized [ 16.768179] Console: colour VGA+ 80x25 [ 16.771639] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.772194] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.795277] Memory: 1028236k/1048320k available (5981k kernel code, 19356k reserved, 2312k data, 520k init, 130816k highmem) [ 16.795344] virtual kernel memory layout: [ 16.795345] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 16.795346] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.795347] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 16.795347] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 16.795348] .init : 0xc0923000 - 0xc09a5000 ( 520 kB) [ 16.795349] .data : 0xc06d7519 - 0xc091970c (2312 kB) [ 16.795350] .text : 0xc0100000 - 0xc06d7519 (5981 kB) [ 16.795732] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.855794] Calibrating delay using timer specific routine.. 4177.98 BogoMIPS (lpj=2088991) [ 16.855918] Security Framework v1.0.0 initialized [ 16.855968] SELinux: Initializing. [ 16.856024] SELinux: Starting in permissive mode [ 16.856075] selinux_register_security: Registering secondary module capability [ 16.856132] Capability LSM initialized as secondary [ 16.856190] Mount-cache hash table entries: 512 [ 16.856325] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 16.856331] monitor/mwait feature present. [ 16.856380] using mwait in idle threads. [ 16.856429] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.856515] CPU: L2 cache: 2048K [ 16.856562] CPU: Physical Processor ID: 0 [ 16.856610] CPU: Processor Core ID: 0 [ 16.856658] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 [ 16.856663] Intel machine check architecture supported. [ 16.856725] Intel machine check reporting enabled on CPU#0. [ 16.856776] Compat vDSO mapped to ffffe000. [ 16.856832] Checking 'hlt' instruction... OK. [ 16.862465] SMP alternatives: switching to UP code [ 16.863009] ACPI: Core revision 20060707 [ 16.866982] CPU0: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02 [ 16.867131] SMP alternatives: switching to SMP code [ 16.867215] Booting processor 1/1 eip 3000 [ 16.883970] Initializing CPU#1 [ 16.944020] Calibrating delay using timer specific routine.. 3575.48 BogoMIPS (lpj=1787740) [ 16.944025] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 [ 16.944029] monitor/mwait feature present. [ 16.944033] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.944034] CPU: L2 cache: 2048K [ 16.944036] CPU: Physical Processor ID: 0 [ 16.944037] CPU: Processor Core ID: 1 [ 16.944039] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 [ 16.944043] Intel machine check architecture supported. [ 16.944046] Intel machine check reporting enabled on CPU#1. [ 16.944409] CPU1: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz stepping 02 [ 16.944983] Total of 2 processors activated (7753.46 BogoMIPS). [ 16.945178] ENABLING IO-APIC IRQs [ 16.945404] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 17.059609] checking TSC synchronization across 2 CPUs: passed. [ 0.000840] Brought up 2 CPUs [ 0.407872] migration_cost=6144 [ 0.408291] NET: Registered protocol family 16 [ 0.408474] No dock devices found. [ 0.408528] EISA bus registered [ 0.408577] ACPI: bus type pci registered [ 0.408631] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.408681] PCI: Not using MMCONFIG. [ 0.408869] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 [ 0.408919] PCI: Using configuration type 1 [ 0.408967] Setting up standard PCI resources [ 0.426886] ACPI: Interpreter enabled [ 0.426936] ACPI: Using IOAPIC for interrupt routing [ 0.427460] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.427511] PCI: Probing PCI hardware (bus 00) [ 0.428572] Boot video device is 0000:01:00.0 [ 0.428819] PCI: Transparent bridge - 0000:00:14.4 [ 0.428899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.453637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.456166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.457581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.458321] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.459059] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.459798] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.460536] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.461269] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. [ 0.461701] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.462437] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.463074] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.463134] pnp: PnP ACPI init [ 0.467450] pnp: PnP ACPI: found 16 devices [ 0.467500] PnPBIOS: Disabled by ACPI PNP [ 0.467686] SCSI subsystem initialized [ 0.467760] libata version 2.00 loaded. [ 0.467818] usbcore: registered new interface driver usbfs [ 0.467892] usbcore: registered new interface driver hub [ 0.467971] usbcore: registered new device driver usb [ 0.468052] PCI: Using ACPI for IRQ routing [ 0.468100] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.468165] PCI: Cannot allocate resource region 3 of device 0000:00:00.0 [ 0.475411] NetLabel: Initializing [ 0.475459] NetLabel: domain hash size = 128 [ 0.475510] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.475569] NetLabel: unlabeled traffic allowed by default [ 0.476531] pnp: 00:0c: ioport range 0xa00-0xa7f has been reserved [ 0.476602] ieee1394: Initialized config rom entry `ip1394' [ 0.476696] PCI: Bridge: 0000:00:02.0 [ 0.476744] IO window: a000-afff [ 0.476794] MEM window: fa900000-fe9fffff [ 0.476843] PREFETCH window: bff00000-dfefffff [ 0.476895] PCI: Bridge: 0000:00:14.4 [ 0.476944] IO window: b000-bfff [ 0.476996] MEM window: fea00000-feafffff [ 0.477046] PREFETCH window: 50000000-500fffff [ 0.477107] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.477135] NET: Registered protocol family 2 [ 0.488188] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.488366] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.489175] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.489617] TCP: Hash tables configured (established 131072 bind 65536) [ 0.489668] TCP reno registered [ 0.497482] checking if image is initramfs... it is [ 0.582496] Freeing initrd memory: 971k freed [ 0.582925] Machine check exception polling timer started. [ 0.583270] audit: initializing netlink socket (disabled) [ 0.583337] audit(1183729132.053:1): initialized [ 0.583446] highmem bounce pool size: 64 pages [ 0.583495] Total HugeTLB memory allocated, 0 [ 0.583613] VFS: Disk quotas dquot_6.5.1 [ 0.583679] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.583808] squashfs: version 3.2 (2007/01/02) Phillip Lougher [ 0.583871] Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu [ 0.584161] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.584399] NTFS driver 2.1.28 [Flags: R/W]. [ 0.584481] QNX4 filesystem 0.2.3 registered. [ 0.584530] fuse init (API version 7.8) [ 0.584639] JFS: nTxBlock = 8043, nTxLock = 64346 [ 0.591031] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 0.594128] SGI XFS Quota Management subsystem [ 0.594230] SELinux: Registering netfilter hooks [ 0.601676] io scheduler noop registered [ 0.601762] io scheduler anticipatory registered [ 0.601848] io scheduler deadline registered [ 0.601944] io scheduler cfq registered (default) [ 0.702081] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.702110] assign_interrupt_mode Found MSI capability [ 0.702197] Allocate Port Service[0000:00:02.0:pcie00] [ 0.725232] lp: driver loaded but no devices found [ 0.725358] Real Time Clock Driver v1.12ac [ 0.725459] toshiba: not a supported Toshiba laptop [ 0.729509] ppdev: user-space parallel port driver [ 0.729591] initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) [ 0.729659] Linux agpgart interface v0.101 (c) Dave Jones [ 0.748639] vesafb: NVIDIA Corporation, G73 Board - p345h0 , Chip Rev (OEM: NVIDIA) [ 0.748698] vesafb: VBE version: 3.0 [ 0.780475] vesafb: protected mode interface info at c000:c9d0 [ 0.780524] vesafb: pmi: set display start = c00cca06, set palette = c00cca70 [ 0.780574] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.785993] vesafb: VBIOS/hardware supports DDC2 transfers [ 0.883778] vesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 140 MHz [ 0.883837] vesafb: scrolling: redraw [ 1.138703] Console: switching to colour frame buffer device 128x48 [ 1.145832] vesafb: framebuffer at 0xc0000000, mapped to 0xf8d00000, using 6144k, total 262144k [ 1.145942] fb0: VESA VGA frame buffer device [ 1.146089] input: Power Button (FF) as /class/input/input0 [ 1.146167] ACPI: Power Button (FF) [PWRF] [ 1.146288] input: Power Button (CM) as /class/input/input1 [ 1.146363] ACPI: Power Button (CM) [PWRB] [ 1.146484] Using specific hotkey driver [ 1.146570] ACPI: duty_cycle spans bit 4 [ 1.146810] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] [ 1.146987] ACPI: duty_cycle spans bit 4 [ 1.147180] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] [ 1.147335] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 1.147466] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 1.150631] ibm_acpi: ec object not found [ 1.150700] isapnp: Scanning for PnP cards... [ 1.425284] isapnp: No Plug & Play device found [ 1.425346] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 1.425573] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.428378] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.431364] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.434058] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.436672] parport: PnPBIOS parport detected. [ 1.439199] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 1.516554] lp0: using parport0 (interrupt-driven). [ 1.533139] FDC 0 is a post-1991 82077 [ 1.536897] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 1.539753] loop: loaded (max 8 devices) [ 1.542197] Compaq SMART2 Driver (v 2.6.0) [ 1.544841] HP CISS Driver (v 3.6.14) [ 1.547567] v2.3 : Micro Memory(tm) PCI memory board block driver [ 1.550227] MM: desc_per_page = 128 [ 1.553404] Loading iSCSI transport class v2.0-724. [ 1.556108] iscsi: registered transport (tcp) [ 1.558868] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 1.561455] Detecting Adaptec I2O RAID controllers... [ 1.564392] Adaptec aacraid driver (1.1-5[2423]-mh3) [ 1.567153] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded [ 1.569899] NCR53c406a: no available ports found [ 1.572365] sym53c416.c: Version 1.0.0-ac [ 1.574810] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver [ 1.580203] iscsi: registered transport (qla4xxx) [ 1.582892] QLogic iSCSI HBA Driver [ 1.585497] Emulex LightPulse Fibre Channel SCSI driver 8.1.11 [ 1.588097] Copyright(c) 2004-2006 Emulex. All rights reserved. [ 1.590816] seagate: ST0x/TMC-8xx not detected. [ 1.612717] Failed initialization of WD-7000 SCSI card! [ 1.615317] IBM MCA SCSI: Version 4.0b-ac [ 1.617891] IBM MCA SCSI: No Microchannel-bus present --> Aborting. [ 1.617893] This machine does not have any IBM MCA-bus [ 1.617894] or the MCA-Kernel-support is not enabled! [ 2.015152] DC390: clustering now enabled by default. If you get problems load [ 2.015154] with "disable_clustering=1" and report to maintainers [ 2.020393] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 2.022988] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) [ 2.025644] megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 [ 2.028274] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 2.030929] GDT-HA: Found 0 PCI Storage RAID Controllers [ 2.033557] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 2.036199] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. [ 2.038846] nsp32: loading... [ 2.041422] ipr: IBM Power RAID SCSI Device Driver version: 2.3.0 (November 8, 2006) [ 2.044133] RocketRAID 3xxx SATA Controller driver v1.0 (060426) [ 2.046902] stex: Promise SuperTrak EX Driver version: 3.1.0.1 [ 2.049677] st: Version 20070203, fixed bufsize 32768, s/g segs 256 [ 2.052438] osst :I: Tape driver with OnStream support version 0.99.4 [ 2.052439] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 2.057775] ahci 0000:00:12.0: version 2.0 [ 2.057800] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 2.944173] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.946925] ahci 0000:00:12.0: flags: 64bit ncq ilck led clo pmp pio slum part [ 2.949789] ata1: SATA max UDMA/133 cmd 0xF8CDAD00 ctl 0x0 bmdma 0x0 irq 16 [ 2.952680] ata2: SATA max UDMA/133 cmd 0xF8CDAD80 ctl 0x0 bmdma 0x0 irq 16 [ 2.955528] ata3: SATA max UDMA/133 cmd 0xF8CDAE00 ctl 0x0 bmdma 0x0 irq 16 [ 2.958321] ata4: SATA max UDMA/133 cmd 0xF8CDAE80 ctl 0x0 bmdma 0x0 irq 16 [ 2.961008] scsi2 : ahci [ 3.368998] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.372142] ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 [ 3.374824] ata1.00: ata1: dev 0 multi count 16 [ 3.377963] ata1.00: configured for UDMA/133 [ 3.380585] scsi3 : ahci [ 3.650420] ata2: SATA link down (SStatus 0 SControl 300) [ 3.653068] scsi4 : ahci [ 3.922644] ata3: SATA link down (SStatus 0 SControl 300) [ 3.925157] scsi5 : ahci [ 4.196914] ata4: SATA link down (SStatus 0 SControl 300) [ 4.199506] scsi 2:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 [ 4.202151] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 4.204724] sda: Write Protect is off [ 4.207257] sda: Mode Sense: 00 3a 00 00 [ 4.207271] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.209963] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 4.212405] sda: Write Protect is off [ 4.215020] sda: Mode Sense: 00 3a 00 00 [ 4.215033] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.217743] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 4.279001] sd 2:0:0:0: Attached scsi disk sda [ 4.281743] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.284904] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 4.287596] PCI: Setting latency timer of device 0000:00:14.1 to 64 [ 4.287728] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFF00 irq 14 [ 4.290413] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFF08 irq 15 [ 4.293056] scsi6 : pata_atiixp [ 4.565727] ata5.00: ATAPI, max UDMA/66 [ 4.705930] ata5.00: configured for UDMA/66 [ 4.708152] scsi7 : pata_atiixp [ 4.846481] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5 [ 4.852332] sr0: scsi3-mmc drive: 78x/78x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.854561] Uniform CD-ROM driver Revision: 3.20 [ 4.857030] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 4.857082] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 4.860435] I2O subsystem v1.325 [ 4.862908] i2o: max drivers = 8 [ 4.865517] I2O Configuration OSM v1.323 [ 4.867988] I2O Bus Adapter OSM v1.317 [ 4.870394] I2O Block Device OSM v1.325 [ 4.872795] I2O SCSI Peripheral OSM v1.316 [ 4.875110] I2O ProcFS OSM v1.316 [ 4.877377] Fusion MPT base driver 3.04.03 [ 4.879661] Copyright (c) 1999-2007 LSI Logic Corporation [ 4.882006] Fusion MPT SPI Host driver 3.04.03 [ 4.884411] Fusion MPT FC Host driver 3.04.03 [ 4.886781] Fusion MPT SAS Host driver 3.04.03 [ 4.889127] Fusion MPT misc device (ioctl) driver 3.04.03 [ 4.891475] mptctl: Registered with Fusion MPT base driver [ 4.893789] mptctl: /dev/mptctl @ (major,minor=10,220) [ 4.896108] Fusion MPT LAN driver 3.04.03 [ 4.898481] usbcore: registered new interface driver usblp [ 4.900818] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 4.903199] Initializing USB Mass Storage driver... [ 4.905591] usbcore: registered new interface driver usb-storage [ 4.907987] USB Mass Storage support registered. [ 4.910452] usbcore: registered new interface driver libusual [ 4.912875] usbcore: registered new interface driver hiddev [ 4.915200] usbcore: registered new interface driver usbhid [ 4.917453] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 4.919747] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 4.924510] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.926744] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.928902] parport0: cannot grant exclusive access for device parkbd [ 4.929016] mice: PS/2 mouse device common for all mice [ 4.954290] input: AT Translated Set 2 keyboard as /class/input/input2 [ 5.140474] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 5.144534] md: linear personality registered for level -1 [ 5.146724] md: raid0 personality registered for level 0 [ 5.148887] md: raid1 personality registered for level 1 [ 5.151045] md: raid10 personality registered for level 10 [ 5.167442] raid6: int32x1 707 MB/s [ 5.184232] raid6: int32x2 695 MB/s [ 5.200991] raid6: int32x4 566 MB/s [ 5.217807] raid6: int32x8 515 MB/s [ 5.234503] raid6: mmxx1 2277 MB/s [ 5.251275] raid6: mmxx2 2394 MB/s [ 5.268052] raid6: sse1x1 1550 MB/s [ 5.284783] raid6: sse1x2 1941 MB/s [ 5.301546] raid6: sse2x1 2808 MB/s [ 5.318317] raid6: sse2x2 2871 MB/s [ 5.320144] raid6: using algorithm sse2x2 (2871 MB/s) [ 5.321973] md: raid6 personality registered for level 6 [ 5.323823] md: raid5 personality registered for level 5 [ 5.325649] md: raid4 personality registered for level 4 [ 5.327452] raid5: automatically using best checksumming function: pIII_sse [ 5.333307] pIII_sse : 6644.000 MB/sec [ 5.335146] raid5: using function: pIII_sse (6644.000 MB/sec) [ 5.337003] md: multipath personality registered for level -4 [ 5.338887] md: faulty personality registered for level -5 [ 5.340851] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 5.342965] EISA: Probing bus 0 at eisa.0 [ 5.344972] EISA: Detected 0 cards. [ 5.346972] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.375494] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). [ 5.377664] specify port [ 5.379685] snd_cs4231: probe of snd_cs4231.0 failed with error -22 [ 5.382071] ALSA device list: [ 5.383838] No soundcards found. [ 5.385646] TCP bic registered [ 5.387371] NET: Registered protocol family 1 [ 5.389238] NET: Registered protocol family 17 [ 5.393521] Starting balanced_irq [ 5.395504] Using IPI No-Shortcut mode [ 5.397604] ACPI: (supports S0 S1 S3 S4 S5) [ 5.397715] Time: tsc clocksource has been installed. [ 5.401487] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 5.403852] Freeing unused kernel memory: 520k freed [ 5.485953] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 18 [ 5.485968] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 5.486024] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 5.486060] ehci_hcd 0000:00:13.5: debug port 1 [ 5.486073] ehci_hcd 0000:00:13.5: irq 18, io mem 0xfebff800 [ 5.486083] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.486223] usb usb1: configuration #1 chosen from 1 choice [ 5.486259] hub 1-0:1.0: USB hub found [ 5.486267] hub 1-0:1.0: 10 ports detected [ 5.602190] USB Universal Host Controller Interface driver v3.0 [ 5.621710] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 5.621767] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 5.621780] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 5.621827] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 5.621847] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000 [ 5.671003] usb usb2: configuration #1 chosen from 1 choice [ 5.671038] hub 2-0:1.0: USB hub found [ 5.671048] hub 2-0:1.0: 2 ports detected [ 5.758618] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.759577] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19 [ 5.759585] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 5.759618] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 5.759631] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfd000 [ 5.808124] usb usb3: configuration #1 chosen from 1 choice [ 5.808156] hub 3-0:1.0: USB hub found [ 5.808165] hub 3-0:1.0: 2 ports detected [ 5.860680] usb 1-1: configuration #1 chosen from 1 choice [ 5.860749] hub 1-1:1.0: USB hub found [ 5.860831] hub 1-1:1.0: 4 ports detected [ 5.897733] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 5.897740] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 5.897774] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 5.897788] ohci_hcd 0000:00:13.2: irq 20, io mem 0xfebfc000 [ 5.946283] usb usb4: configuration #1 chosen from 1 choice [ 5.946315] hub 4-0:1.0: USB hub found [ 5.946324] hub 4-0:1.0: 2 ports detected [ 6.034865] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19 [ 6.034872] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 6.034905] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 6.034916] ohci_hcd 0000:00:13.3: irq 19, io mem 0xfebfb000 [ 6.083421] usb usb5: configuration #1 chosen from 1 choice [ 6.083453] hub 5-0:1.0: USB hub found [ 6.083462] hub 5-0:1.0: 2 ports detected [ 6.108715] usb 1-1.3: new low speed USB device using ehci_hcd and address 3 [ 6.173024] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20 [ 6.173032] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 6.173068] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 6.173078] ohci_hcd 0000:00:13.4: irq 20, io mem 0xfebfa000 [ 6.191191] usb 1-1.3: configuration #1 chosen from 1 choice [ 6.194192] input: Logitech USB Trackball as /class/input/input4 [ 6.194272] input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:13.5-1.3 [ 6.221577] usb usb6: configuration #1 chosen from 1 choice [ 6.221610] hub 6-0:1.0: USB hub found [ 6.221620] hub 6-0:1.0: 2 ports detected [ 6.331066] sl811: driver sl811-hcd, 19 May 2005 [ 6.352299] usb 1-1.2: new low speed USB device using ehci_hcd and address 4 [ 6.415248] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2 [ 6.415251] Copyright (c) 1999-2006 Intel Corporation. [ 6.434485] usb 1-1.2: configuration #1 chosen from 1 choice [ 6.437418] input: USB-compliant keyboard as /class/input/input5 [ 6.437470] input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:13.5-1.2 [ 6.442453] input: USB-compliant keyboard as /class/input/input6 [ 6.442569] input,hiddev0: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:13.5-1.2 [ 7.512435] EXT3-fs: INFO: recovery required on readonly filesystem. [ 7.512438] EXT3-fs: write access will be enabled during recovery. [ 7.640129] kjournald starting. Commit interval 5 seconds [ 7.640141] EXT3-fs: recovery complete. [ 7.640312] EXT3-fs: mounted filesystem with ordered data mode. [ 9.592081] input: PC Speaker as /class/input/input7 [ 9.712435] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 9.766228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 9.766246] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 9.808078] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.269289] 8139too Fast Ethernet driver 0.9.28 [ 10.269384] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 10.270343] eth0: RealTek RTL8139 at 0xf9304c00, 00:19:db:6b:12:dd, IRQ 21 [ 10.270345] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 10.273367] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 10.491975] nvidia: module license 'NVIDIA' taints kernel. [ 10.751992] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 10.752002] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 10.752240] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007 [ 10.986267] EXT3 FS on sda6, internal journal [ 11.179046] PPP generic driver version 2.4.2 [ 11.188134] NET: Registered protocol family 24 [ 11.334866] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k [ 15.707013] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 19.094833] NET: Registered protocol family 10 [ 19.094930] lo: Disabled Privacy Extensions [ 19.095060] Mobile IPv6 [ 28.796316] eth0: no IPv6 routers present [ 247.937188] kjournald starting. Commit interval 5 seconds [ 247.937296] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 247.937656] EXT3 FS on sda5, internal journal [ 247.937659] EXT3-fs: recovery complete. [ 247.937812] EXT3-fs: mounted filesystem with ordered data mode. [ 248.046427] NTFS volume version 3.1. [ 248.046432] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. [ 248.046436] NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. [ 249.019041] UDF-fs: Partition marked readonly; forcing readonly mount [ 249.051541] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'ANIME_NARUTO_1', timestamp 2007/05/26 00:37 (10b4) [ 250.915896] kjournald starting. Commit interval 5 seconds [ 250.925029] EXT3 FS on sda2, internal journal [ 250.925034] EXT3-fs: recovery complete. [ 250.951053] EXT3-fs: mounted filesystem with ordered data mode. [ 611.367533] hda-intel: Invalid position buffer, using LPIB read method instead. [ 5261.971644] usb 1-7: new high speed USB device using ehci_hcd and address 5 [ 5262.075934] usb 1-7: configuration #1 chosen from 1 choice [ 5262.076336] scsi8 : SCSI emulation for USB Mass Storage devices [ 5262.076396] usb-storage: device found at 5 [ 5262.076398] usb-storage: waiting for device to settle before scanning [ 5266.488057] usb-storage: device scan complete [ 5266.489485] scsi 8:0:0:0: Direct-Access TOSHIBA MK1031GAS AA20 PQ: 0 ANSI: 0 CCS [ 5266.490791] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB) [ 5266.491342] sdb: Write Protect is off [ 5266.491344] sdb: Mode Sense: 00 14 00 00 [ 5266.491347] sdb: assuming drive cache: write through [ 5266.492115] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB) [ 5266.492665] sdb: Write Protect is off [ 5266.492668] sdb: Mode Sense: 00 14 00 00 [ 5266.492670] sdb: assuming drive cache: write through [ 5266.492672] sdb: sdb1 [ 5266.500789] sd 8:0:0:0: Attached scsi disk sdb [ 5266.500825] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 5266.724661] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal [ 5266.724682] ReiserFS: sdb1: using ordered data mode [ 5266.742647] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 5266.743023] ReiserFS: sdb1: checking transaction log (sdb1) [ 5268.038837] ReiserFS: sdb1: replayed 5 transactions in 2 seconds [ 5268.519640] ReiserFS: sdb1: Using r5 hash to sort names