4096 -> 229376 HighMem 229376 -> 515760 early_node_map[1] active PFN ranges 0: 0 -> 515760 On node 0 totalpages: 515760 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2237 pages used for memmap HighMem zone: 284147 pages, LIFO batch:31 DMI present. ACPI: RSDP (v002 LENOVO ) @ 0x000f68d0 ACPI: XSDT (v001 LENOVO TP-7L 0x00001090 LTP 0x00000000) @ 0x7debca72 ACPI: FADT (v003 LENOVO TP-7L 0x00001090 LNVO 0x00000001) @ 0x7debcc00 ACPI: SSDT (v001 LENOVO TP-7L 0x00001090 MSFT 0x03000000) @ 0x7debcdb4 ACPI: ECDT (v001 LENOVO TP-7L 0x00001090 LNVO 0x00000001) @ 0x7deccbfb ACPI: TCPA (v002 LENOVO TP-7L 0x00001090 LNVO 0x00000001) @ 0x7deccc4d ACPI: MADT (v001 LENOVO TP-7L 0x00001090 LNVO 0x00000001) @ 0x7deccc7f ACPI: MCFG (v001 LENOVO TP-7L 0x00001090 LNVO 0x00000001) @ 0x7deccce7 ACPI: HPET (v001 LENOVO TP-7L 0x00001090 LNVO 0x00000001) @ 0x7deccd23 ACPI: SLIC (v001 LENOVO TP-7L 0x00001090 LTP 0x00000000) @ 0x7deccdf0 ACPI: BOOT (v001 LENOVO TP-7L 0x00001090 LTP 0x00000001) @ 0x7deccf66 ACPI: ASF! (v016 LENOVO TP-7L 0x00001090 PTL 0x00000001) @ 0x7deccf8e ACPI: SSDT (v001 LENOVO TP-7L 0x00001090 INTL 0x20050513) @ 0x7dee26d9 ACPI: SSDT (v001 LENOVO TP-7L 0x00001090 INTL 0x20050513) @ 0x7dee2938 ACPI: SSDT (v001 LENOVO TP-7L 0x00001090 INTL 0x20050513) @ 0x7dee29de ACPI: SSDT (v001 LENOVO TP-7L 0x00001090 INTL 0x20050513) @ 0x7dee2ed5 ACPI: DSDT (v001 LENOVO TP-7L 0x00001090 MSFT 0x03000000) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: Napa ERB APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) Detected 2194.536 MHz processor. Built 1 zonelists. Total pages: 511731 Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda2 doscsi irqpoll noapic pci=routeirq Misrouted IRQ fixup and polling support enabled This may significantly impact system performance mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c057f000 soft=c055f000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2037732k/2063040k available (3146k kernel code, 24136k reserved, 1042k data, 240k init, 1145536k highmem) virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc051e000 - 0xc055a000 ( 240 kB) .data : 0xc0412a92 - 0xc0517474 (1042 kB) .text : 0xc0100000 - 0xc0412a92 (3146 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Calibrating delay using timer specific routine.. 4400.37 BogoMIPS (lpj=22001854) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0c00) CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0580000 soft=c0560000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4389.04 BogoMIPS (lpj=21945242) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a Total of 2 processors activated (8789.41 BogoMIPS). checking TSC synchronization across 2 CPUs: CPU#0 had -91 usecs TSC skew, fixed it up. CPU#1 had 91 usecs TSC skew, fixed it up. Brought up 2 CPUs migration_cost=12 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:19.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1b.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1c.4[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[C] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:00:1f.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:15:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:15:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: d4000000-d6ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: fc000000-fdffffff PREFETCH window: f8000000-f80fffff PCI: Bridge: 0000:00:1c.1 IO window: 4000-4fff MEM window: dc100000-df2fffff PREFETCH window: dfd00000-dfdfffff PCI: Bridge: 0000:00:1c.2 IO window: 5000-5fff MEM window: d8000000-d9ffffff PREFETCH window: dfa00000-dfafffff PCI: Bridge: 0000:00:1c.3 IO window: 6000-6fff MEM window: d0000000-d1ffffff PREFETCH window: df700000-df7fffff PCI: Bridge: 0000:00:1c.4 IO window: 7000-7fff MEM window: cc000000-cdffffff PREFETCH window: df400000-df4fffff PCI: Bus 22, cardbus bridge: 0000:15:00.0 IO window: 00008000-000080ff IO window: 00008400-000084ff PREFETCH window: f4000000-f7ffffff MEM window: 80000000-83ffffff PCI: Bridge: 0000:00:1e.0 IO window: 8000-bfff MEM window: f8100000-fbffffff PREFETCH window: f4000000-f7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:15:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:15:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1847k freed Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1183680337.830:1): initialized highmem bounce pool size: 64 pages squashfs: version 3.2 (2007/01/02) Phillip Lougher SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem OCFS2 1.3.3 OCFS2 Node Manager 1.3.3 OCFS2 DLM 1.3.3 OCFS2 DLMFS 1.3.3 OCFS2 User DLM kernel interface loaded GFS2 (built Jul 5 2007 16:16:52) installed Lock_Nolock (built Jul 5 2007 16:16:54) installed io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie02] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) myri10ge: Version 1.2.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH8M: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[C] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ICH8M: chipset revision 3 ICH8M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1830-0x1837, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-U10N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 240k freed Time: hpet clocksource has been installed. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 11, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usb 2-5: new high speed USB device using ehci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input4 usb 2-5: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 11, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 11, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input5 BUG: soft lockup detected on CPU#0! [] softlockup_tick+0xa3/0xb2 [] update_process_times+0x3b/0x5e [] smp_apic_timer_interrupt+0x72/0x82 [] apic_timer_interrupt+0x28/0x30 [] __do_softirq+0x54/0xba [] do_softirq+0x59/0xa9 [] smp_apic_timer_interrupt+0x77/0x82 [] apic_timer_interrupt+0x28/0x30 [] _spin_unlock_irqrestore+0x8/0x9 [] setup_irq+0x140/0x1b2 [] usb_hcd_irq+0x0/0x4e [usbcore] [] request_irq+0x7c/0x98 [] usb_add_hcd+0x28c/0x566 [usbcore] [] usb_hcd_pci_probe+0x261/0x32c [usbcore] [] pci_device_probe+0x36/0x57 [] really_probe+0x7f/0x103 [] driver_probe_device+0x44/0xa5 [] __driver_attach+0x0/0x79 [] __driver_attach+0x46/0x79 [] bus_for_each_dev+0x33/0x55 [] driver_attach+0x16/0x18 [] __driver_attach+0x0/0x79 [] bus_add_driver+0x5e/0x15f [] __pci_register_driver+0x64/0x90 [] uhci_hcd_init+0x78/0x99 [uhci_hcd] [] sys_init_module+0x1770/0x18b7 [] do_sync_read+0xc7/0x10a [] __fput+0x112/0x13c [] sysenter_past_esp+0x5f/0x85 ======================= irq 10: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x36/0x7d [] note_interrupt+0x1a9/0x1e7 [] handle_level_irq+0xa3/0xd8 [] handle_level_irq+0x0/0xd8 [] do_IRQ+0x8e/0xb9 [] common_interrupt+0x23/0x28 [] __do_softirq+0x54/0xba [] do_softirq+0x59/0xa9 [] smp_apic_timer_interrupt+0x77/0x82 [] apic_timer_interrupt+0x28/0x30 [] _spin_unlock_irqrestore+0x8/0x9 [] setup_irq+0x140/0x1b2 [] usb_hcd_irq+0x0/0x4e [usbcore] [] request_irq+0x7c/0x98 [] usb_add_hcd+0x28c/0x566 [usbcore] [] usb_hcd_pci_probe+0x261/0x32c [usbcore] [] pci_device_probe+0x36/0x57 [] really_probe+0x7f/0x103 [] driver_probe_device+0x44/0xa5 [] __driver_attach+0x0/0x79 [] __driver_attach+0x46/0x79 [] bus_for_each_dev+0x33/0x55 [] driver_attach+0x16/0x18 [] __driver_attach+0x0/0x79 [] bus_add_driver+0x5e/0x15f [] __pci_register_driver+0x64/0x90 [] uhci_hcd_init+0x78/0x99 [uhci_hcd] [] sys_init_module+0x1770/0x18b7 [] do_sync_read+0xc7/0x10a [] __fput+0x112/0x13c [] sysenter_past_esp+0x5f/0x85 ======================= handlers: [] (usb_hcd_irq+0x0/0x4e [usbcore]) Disabling IRQ #10 uhci_hcd 0000:00:1d.0: irq 10, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018c0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 11, io base 0x000018e0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver sl811: driver sl811-hcd, 19 May 2005 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:15:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:15:00.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4] libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ata1: SATA max UDMA/133 cmd 0xF88C8100 ctl 0x0 bmdma 0x0 irq 217 scsi0 : ahci ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a10281d] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA HTE721010G9SA00 MCZO PQ: 0 ANSI: 5 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda JFS: nTxBlock = 8192, nTxLock = 65536 Intel(R) PRO/1000 Network Driver - version 7.3.15-k2 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1a:6b:36:30:49 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection sd 0:0:0:0: Attached scsi generic sg0 type 0 ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ACPI: PCI Interrupt 0000:00:1f.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 input: PC Speaker as /class/input/input6 ACPI: PCI Interrupt 0000:00:1b.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] Linux agpgart interface v0.101 (c) Dave Jones nvidia: module license 'NVIDIA' taints kernel. Yenta: ISA IRQ mask 0x00b8, PCI irq 10 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff cs: IO port probe 0x8000-0xbfff: clean. pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: 0.8.4.2 (0.9.3.1) ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007 ath_pci: no version for "ieee80211_encap" found: kernel tainted. ath_pci: 0.9.4.5 (0.9.3.1) ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:03:00.0 to 64 ath_rate_sample: 1.2 (0.9.3.1) wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 10.3 phy 6.1 radio 10.2 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xdf2f0000, irq=11 Linux video capture interface: v2.00 uvcvideo: disagrees about version of symbol struct_module cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f cs: IO port probe 0x100-0x4ff: excluding 0x3b0-0x3df 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. ibm_acpi: ThinkPad EC firmware 7KHT21WW-1.05 ibm_acpi: IBM ThinkPad ACPI Extras v0.13 ibm_acpi: http://ibm-acpi.sf.net/ tp_base: disagrees about version of symbol struct_module tp_smapi: disagrees about version of symbol struct_module kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1028152k swap on /dev/sda3. Priority:-1 extents:1 across:1028152k Real Time Clock Driver v1.12ac NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: f904e973 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device ipv6 rtc ibm_acpi compat_ioctl32 videodev v4l1_compat v4l2_common wlan_scan_sta pcmcia ath_rate_sample(F) ath_pci(F) wlan ath_hal(P) nvidia(P) agpgart yenta_socket rsrc_nonstatic pcmcia_core snd_hda_intel snd_pcm snd_timer snd snd_page_alloc pcspkr i2c_i801 i2c_core eth1394 sg e1000 nfs lockd sunrpc jfs ata_piix ahci libata sbp2 ohci1394 ieee1394 sl811_hcd usbhid ohci_hcd uhci_hcd usb_storage ehci_hcd usbcore CPU: 0 EIP: 0060:[] Tainted: PF VLI EFLAGS: 00010297 (2.6.20-gentoo-r8 #22) EIP is at snd_hda_input_mux_info+0x2a/0x36 [snd_hda_intel] eax: f90836c0 ebx: 00000004 ecx: 00000003 edx: f7683e04 esi: 00000000 edi: f7683e5c ebp: f7d5674c esp: f7683dd0 ds: 007b es: 007b ss: 0068 Process alsactl (pid: 11016, ti=f7683000 task=c21f4a90 task.ti=f7683000) Stack: f79f39c0 f7683e04 bfed3c20 f8fc616c 00000101 bfed3c20 f7caf680 00000000 f7d56768 f8fd5000 00000000 f79f3a28 f7d5674c 00000011 00000002 00000000 00000000 75706e49 6f532074 65637275 00000000 00000000 00000000 00000000 Call Trace: [] snd_ctl_ioctl+0x3d3/0x912 [snd] [] snd_ctl_ioctl+0x0/0x912 [snd] [] do_ioctl+0x1f/0x62 [] vfs_ioctl+0x244/0x256 [] sys_ioctl+0x33/0x4c [] sysenter_past_esp+0x5f/0x85 ======================= Code: c3 57 56 53 8d 7a 58 c7 42 40 03 00 00 00 c7 42 48 01 00 00 00 8b 08 89 4a 50 8b 4a 54 8b 18 8d 73 ff 39 d9 0f 43 ce 8b 74 c8 04 aa 84 c0 75 fa 5b 31 c0 5e 5f c3 55 89 c5 57 31 c0 56 89 d7 EIP: [] snd_hda_input_mux_info+0x2a/0x36 [snd_hda_intel] SS:ESP 0068:f7683dd0 <6>Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized ADDRCONF(NETDEV_UP): ath0: link is not ready ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready ath0: no IPv6 routers present