Linux version 2.6.21-hardened-r3 (root@amd64) (gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2, ssp-3.4.6-1.0, pie-8.7.10)) #7 SMP PREEMPT Thu Jun 28 07:59:26 PDT 2007
Command line: root=/dev/ram0 real_root=/dev/mapper/nvidia_ccdbgacj1 init=/linuxrc ramdisk=8192 dodmraid udev vga=0x31B video=versafb:mtrr:3,ywrap
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
 BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
 BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
 BIOS-e820: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS)
 BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Entering add_active_range(0, 0, 155) 0 entries of 3200 used
Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
end_pfn_map = 1310720
DMI 2.3 present.
ACPI: RSDP 000FB520, 0024 (r2 ACPIAM)
ACPI: XSDT BFFB0100, 0044 (r1 A_M_I_ OEMXSDT   1000708 MSFT       97)
ACPI: FACP BFFB0290, 00F4 (r3 A_M_I_ OEMFACP   1000708 MSFT       97)
ACPI: DSDT BFFB0440, 6A82 (r1  A0371 A0371001        1 INTL  2002026)
ACPI: FACS BFFBE000, 0040
ACPI: APIC BFFB0390, 0070 (r1 A_M_I_ OEMAPIC   1000708 MSFT       97)
ACPI: MCFG BFFB0400, 003C (r1 A_M_I_ OEMMCFG   1000708 MSFT       97)
ACPI: OEMB BFFBE040, 0056 (r1 A_M_I_ AMI_OEM   1000708 MSFT       97)
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 0000000140000000
Entering add_active_range(0, 0, 155) 0 entries of 3200 used
Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-0000000140000000
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1310720
early_node_map[3] active PFN ranges
    0:        0 ->      155
    0:      256 ->   786352
    0:  1048576 ->  1310720
On node 0 totalpages: 1048395
  DMA zone: 56 pages used for memmap
  DMA zone: 1413 pages reserved
  DMA zone: 2526 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 767976 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009b000 - 000000000009c000
Nosave address range: 000000000009c000 - 00000000000ea000
Nosave address range: 00000000000ea000 - 0000000000100000
Nosave address range: 00000000bffb0000 - 00000000bffbe000
Nosave address range: 00000000bffbe000 - 00000000bffe0000
Nosave address range: 00000000bffe0000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fef00000
Nosave address range: 00000000fef00000 - 00000000ff700000
Nosave address range: 00000000ff700000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
PERCPU: Allocating 32768 bytes of per cpu data
Built 1 zonelists.  Total pages: 1029062
Kernel command line: root=/dev/ram0 real_root=/dev/mapper/nvidia_ccdbgacj1 init=/linuxrc ramdisk=8192 dodmraid udev vga=0x31B video=versafb:mtrr:3,ywrap
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
time.c: Detected 2411.003 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 824000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 4057144k/5242880k available (3503k kernel code, 136436k reserved, 1299k data, 364k init)
Calibrating delay using timer specific routine.. 4823.46 BogoMIPS (lpj=2411730)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12557321
Detected 12.557 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4821.22 BogoMIPS (lpj=2410612)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
Brought up 2 CPUs
migration_cost=328
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:03:00.0
PCI: Transparent bridge - 0000:00:12.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
pnp: 00:06: iomem range 0xfefff000-0xfeffffff has been reserved
pnp: 00:06: iomem range 0xffb00000-0xfffeffff could not be reserved
pnp: 00:06: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0a: ioport range 0xc00-0xc0f has been reserved
pnp: 00:0a: ioport range 0xd00-0xd0f has been reserved
pnp: 00:0a: ioport range 0xa20-0xa2f has been reserved
pnp: 00:0a: ioport range 0xa30-0xa3f has been reserved
pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0c: iomem range 0xc0000-0xcffff has been reserved
pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:04:0b.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:02.0
  IO window: c000-cfff
  MEM window: dfc00000-dfcfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: d000-dfff
  MEM window: dfd00000-dfdfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
  IO window: e000-efff
  MEM window: dfe00000-dfefffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:12.0
  IO window: disabled.
  MEM window: dff00000-dfffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:16.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:17.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:12.0 to 64
PCI: Setting latency timer of device 0000:00:16.0 to 64
PCI: Setting latency timer of device 0000:00:17.0 to 64
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1506k freed
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:16.0
PCI: Found disabled HT MSI Mapping on 0000:00:00.0
PCI: MSI quirk detected. MSI disabled on chipset 0000:00:16.0.
PCI: Found disabled HT MSI Mapping on 0000:00:17.0
PCI: Found disabled HT MSI Mapping on 0000:00:00.0
PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0.
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:16.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:16.0:pcie00]
PCI: Setting latency timer of device 0000:00:17.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:17.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000080000, using 10240k, total 16384k
vesafb: mode is 1280x1024x32, linelength=5120, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8100000a0000
fb1: VGA16 VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.14 addr 0xdfdfc000 irq 19 Yukon-EC (0xb6) rev 2
sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx mode.
sky2 eth0: addr 00:15:f2:c8:13:4b
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
NFORCE-CK804: chipset revision 243
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST3250824A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000092e221]
hdc: SONY DVD RW DRU-810A, ATAPI CD/DVD-ROM drive
hdd: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
sata_nv 0000:00:10.0: version 3.3
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:10.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:10.0 to 64
ata1: SATA max UDMA/133 cmd 0xffffc20000040480 ctl 0xffffc200000404a0 bmdma 0x000000000001a400 irq 23
ata2: SATA max UDMA/133 cmd 0xffffc20000040580 ctl 0xffffc200000405a0 bmdma 0x000000000001a408 irq 23
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD1500ADFD-00NLR0, 19.06P19, max UDMA/133
ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: WDC WD1500ADFD-00NLR0, 19.06P19, max UDMA/133
ata2.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 19.0 PQ: 0 ANSI: 5
ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors (150040 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 19.0 PQ: 0 ANSI: 5
ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
sd 1:0:0:0: [sdb] 293046768 512-byte hardware sectors (150040 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 293046768 512-byte hardware sectors (150040 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:11.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:11.0 to 64
ata3: SATA max UDMA/133 cmd 0xffffc20000042480 ctl 0xffffc200000424a0 bmdma 0x0000000000019800 irq 22
ata4: SATA max UDMA/133 cmd 0xffffc20000042580 ctl 0xffffc200000425a0 bmdma 0x0000000000019808 irq 22
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 21, io mem 0xdfbfbc00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 20, io mem 0xdfbfa000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
usb 1-9: new high speed USB device using ehci_hcd and address 4
usb 1-9: configuration #1 chosen from 1 choice
usb 2-3: new full speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
usb 2-4: new low speed USB device using ohci_hcd and address 3
usb 2-4: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0D17
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
HID device not claimed by input or hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
i2c /dev entries driver
md: raid1 personality registered for level 1
md: multipath personality registered for level -4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
Intel 810 + AC97 Audio, version 1.01, 07:58:25 Jun 28 2007
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0d.0 to 64
i810: NVIDIA nForce Audio found at IO 0xb000 and 0xb400, MEM 0x0000 and 0x0000, IRQ 23
input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97  codec, id: ALG144 (Unknown)
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Freeing unused kernel memory: 364k freed
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
scsi 4:0:0:0: Direct-Access     VBTM     Store 'n' Go     5.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdc] 4028416 512-byte hardware sectors (2063 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] 4028416 512-byte hardware sectors (2063 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
atkbd.c: Unknown key pressed (translated set 2, code 0x6e on isa0060/serio0).
atkbd.c: Use 'setkeycodes 6e <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x6e on isa0060/serio0).
atkbd.c: Use 'setkeycodes 6e <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0x95 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e015 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x95 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e015 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.