Full dmesg output from 2.6.21-gentoo-r3 kernel

dmesg-2.6.21-gentoo-r3 (text/plain), 15.29 KB, created by Andrey Melentyev on 2007-06-25 17:39:43 UTC

00 00000181 00003fcc 00000000
[   16.697333] CPU: Centaur VIA Esther processor 1500MHz stepping 09
[   16.697514] Checking 'hlt' instruction... OK.
[   16.700854] ACPI: Core revision 20070126
[   16.707057] Parsing all Control Methods:
[   16.707273] Table [DSDT](id 0001) - 395 Objects with 44 Devices 144 Methods 14 Regions
[   16.707488] Parsing all Control Methods:
[   16.707662] Table [SSDT](id 0002) - 4 Objects with 0 Devices 1 Methods 0 Regions
[   16.707986] Parsing all Control Methods:
[   16.708164] Table [SSDT](id 0003) - 10 Objects with 0 Devices 3 Methods 0 Regions
[   16.708281]  tbxface-0587 [02] tb_load_namespace     : ACPI Tables successfully acquired
[   16.721438] evxfevnt-0091 [02] enable                : Transition to ACPI mode successful
[   16.722469] ENABLING IO-APIC IRQs
[   16.722890] ..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1
[   16.732966] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   16.733023] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   16.733115] ...trying to set up timer as Virtual Wire IRQ... works.
[   16.845808] NET: Registered protocol family 16
[   16.846009] ACPI: bus type pci registered
[   16.846698] PCI: PCI BIOS revision 2.10 entry at 0xfd8ec, last bus=1
[   16.846752] PCI: Using configuration type 1
[   16.846804] Setting up standard PCI resources
[   16.858809] evgpeblk-0952 [04] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0xA
[   16.859337] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 5 Runtime GPEs in this block
[   16.860021] Completing Region/Field/Buffer/Package initialization:...........................................................
[   16.866243] Initialized 14/14 Regions 0/0 Fields 22/22 Buffers 23/26 Packages (418 nodes)
[   16.866352] Initializing Device/Processor/Thermal objects by executing _INI methods:..
[   17.068125] Executed 2 _INI methods requiring 1 _STA executions (examined 48 objects)
[   17.068252] ACPI: Interpreter enabled
[   17.068305] ACPI: (supports S0 S3 S4 S5)
[   17.068580] ACPI: Using IOAPIC for interrupt routing
[   17.081432] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   17.081503] PCI: Probing PCI hardware (bus 00)
[   17.082689] Boot video device is 0000:01:00.0
[   17.082814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   17.092452] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
[   17.093220] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[   17.093963] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[   17.094449] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
[   17.095048] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 9 *10 11 12)
[   17.095715] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *9 10 11 12)
[   17.096357] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *5
[   17.096970] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled.
[   17.097628] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled.
[   17.098282] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled.
[   17.098934] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled.
[   17.099688] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 9 10 11 12) *8
[   17.101566] ACPI: Power Resource [PFAN] (off)
[   17.101639] Linux Plug and Play Support v0.97 (c) Adam Belay
[   17.101708] pnp: PnP ACPI init
[   17.106547] pnp: PnP ACPI: found 9 devices
[   17.106837] SCSI subsystem initialized
[   17.106946] libata version 2.20 loaded.
[   17.106993] PCI: Using ACPI for IRQ routing
[   17.107050] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   17.112232] pnp: 00:05: iomem range 0x0-0x9ffff could not be reserved
[   17.112292] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
[   17.112350] Time: tsc clocksource has been installed.
[   17.112411] pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[   17.112468] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[   17.112539] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[   17.112595] pnp: 00:06: ioport range 0xfe10-0xfe11 has been reserved
[   17.112651] pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved
[   17.142984] PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0
[   17.143047] PCI: Bridge: 0000:00:01.0
[   17.143098]   IO window: disabled.
[   17.143152]   MEM window: d1000000-d1ffffff
[   17.143207]   PREFETCH window: f0000000-f3ffffff
[   17.143263] PCI: Bus 2, cardbus bridge: 0000:00:0c.0
[   17.143315]   IO window: 00002400-000024ff
[   17.143369]   IO window: 00002800-000028ff
[   17.143424]   PREFETCH window: 50000000-53ffffff
[   17.144223]   MEM window: 54000000-57ffffff
[   17.144303] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   17.144335] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 16
[   17.144503] NET: Registered protocol family 2
[   17.154667] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   17.155005] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   17.156973] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[   17.157557] TCP: Hash tables configured (established 131072 bind 65536)
[   17.157619] TCP reno registered
[   17.161583] io scheduler noop registered
[   17.161679] io scheduler cfq registered (default)
[   17.161800] PCI: Bypassing VIA 8237 APIC De-Assert Message
[   17.315554] Real Time Clock Driver v1.12ac
[   17.315839] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[   17.317891] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[   17.318246] sata_via 0000:00:0f.0: version 2.1
[   17.318286] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17
[   17.318413] sata_via 0000:00:0f.0: routed to hard irq line 9
[   17.318468] sata_via 0000:00:0f.0: enabling SATA channels (0x42)
[   17.318579] ata1: SATA max UDMA/133 cmd 0x00011430 ctl 0x00011426 bmdma 0x00011400 irq 17
[   17.318687] ata2: SATA max UDMA/133 cmd 0x00011428 ctl 0x00011422 bmdma 0x00011408 irq 17
[   17.318814] scsi0 : sata_via
[   17.521075] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   17.646932] Switched to NOHz mode on CPU #0
[   17.672381] ata1.00: ATA-7: FUJITSU MHV2100BH, 00000029, max UDMA/100
[   17.672437] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   17.677370] ata1.00: configured for UDMA/100
[   17.677427] scsi1 : sata_via
[   17.879528] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   17.890319] ATA: abnormal status 0x7F on port 0x0001142f
[   17.890546] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5
[   17.890748] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[   17.890817] sd 0:0:0:0: [sda] Write Protect is off
[   17.890871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.890894] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.891037] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[   17.891111] sd 0:0:0:0: [sda] Write Protect is off
[   17.891165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.891185] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.891250]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[   17.982968] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.983112] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.983276] pata_via 0000:00:0f.1: version 0.2.1
[   17.983498] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17
[   17.983688] ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011410 irq 14
[   17.983803] ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011418 irq 15
[   17.983914] scsi2 : pata_via
[   17.984104] ata3: port disabled. ignoring.
[   17.984133] scsi3 : pata_via
[   18.326271] ata4.00: ATAPI, max UDMA/33
[   18.518197] ata4.00: configured for UDMA/33
[   18.521769] scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5
[   18.551924] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   18.551991] Uniform CD-ROM driver Revision: 3.20
[   18.552129] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   18.552216] sr 3:0:0:0: Attached scsi generic sg1 type 5
[   18.552490] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   18.553666] i8042.c: Detected active multiplexing controller, rev 1.1.
[   18.554131] serio: i8042 KBD port at 0x60,0x64 irq 1
[   18.554223] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   18.554278] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   18.554332] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   18.554386] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   18.554526] mice: PS/2 mouse device common for all mice
[   18.554955] TCP cubic registered
[   18.555021] NET: Registered protocol family 1
[   18.555080] NET: Registered protocol family 17
[   18.555142] Using IPI Shortcut mode
[   18.556706] EXT3-fs: INFO: recovery required on readonly filesystem.
[   18.556770] EXT3-fs: write access will be enabled during recovery.
[   18.822091] input: PS/2 Mouse as /class/input/input0
[   18.842018] input: AlpsPS/2 ALPS GlidePoint as /class/input/input1
[   18.849948] input: AT Translated Set 2 keyboard as /class/input/input2
[   18.924896] kjournald starting.  Commit interval 5 seconds
[   18.924973] EXT3-fs: recovery complete.
[   18.941122] EXT3-fs: mounted filesystem with ordered data mode.
[   18.941252] VFS: Mounted root (ext3 filesystem) readonly.
[   18.941590] Freeing unused kernel memory: 160k freed
[   24.735030] Linux agpgart interface v0.102 (c) Dave Jones
[   24.736612] agpgart: Detected VIA VT3314 chipset
[   25.410593] usbcore: registered new interface driver usbfs
[   25.410635] usbcore: registered new interface driver hub
[   25.410671] usbcore: registered new device driver usb
[   25.412164] USB Universal Host Controller Interface driver v3.0
[   25.715417] agpgart: AGP aperture is 256M @ 0xe0000000
[   25.715802] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
[   25.715971] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[   25.715979] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
[   25.715996] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 18
[   25.716019] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   25.716933] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   25.716984] uhci_hcd 0000:00:10.0: irq 18, io base 0x00001440
[   25.717226] usb usb1: configuration #1 chosen from 1 choice
[   25.717268] hub 1-0:1.0: USB hub found
[   25.717283] hub 1-0:1.0: 2 ports detected
[   25.829877] ieee80211_crypt: registered algorithm 'NULL'
[   25.832458] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   25.832467] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
[   25.837964] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kd
[   25.837972] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   26.013645] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 18
[   26.013677] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   26.013767] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   26.013804] uhci_hcd 0000:00:10.1: irq 18, io base 0x00001460
[   26.014003] usb usb2: configuration #1 chosen from 1 choice
[   26.014051] hub 2-0:1.0: USB hub found
[   26.014066] hub 2-0:1.0: 2 ports detected
[   26.120908] PCI: Enabling device 0000:00:06.0 (0010 -> 0012)
[   26.120934] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[   26.121021] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   26.202353] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   28.845998] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[   28.846312] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 18
[   28.846357] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   28.846410] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3
[   28.846479] ehci_hcd 0000:00:10.4: irq 18, io mem 0xd0001000
[   28.846493] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   28.846636] usb usb3: configuration #1 chosen from 1 choice
[   28.846685] hub 3-0:1.0: USB hub found
[   28.846699] hub 3-0:1.0: 4 ports detected
[   28.947823] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20
[   28.951939] eth0: VIA Rhine II at 0xd0001400, 00:40:ca:e0:e3:22, IRQ 20.
[   28.952661] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[   28.955489] Yenta: CardBus bridge found at 0000:00:0c.0 [1524:1410]
[   28.955518] Yenta: Using CSCINT to route CSC interrupts to PCI
[   28.955524] Yenta: Routing CardBus interrupts to PCI
[   28.955532] Yenta TI: socket 0000:00:0c.0, mfunc 0x01021002, devctl 0x44
[   29.179038] Yenta: ISA IRQ mask 0x02a8, PCI irq 16
[   29.179046] Socket status: 30000006
[   29.181409] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[   29.181609] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[   29.181777] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   29.181785] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   29.181802] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21
[   29.184336] PCI: Setting latency timer of device 0000:00:11.6 to 64
[   29.688415] PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
[   29.688435] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21
[   29.688488] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   30.854638] EXT3 FS on sda7, internal journal
[   31.292776] ACPI: AC Adapter [ACAD] (on-line)
[   31.357052] ACPI: Battery Slot [BAT0] (battery present)
[   31.463663] input: Power Button (FF) as /class/input/input3
[   31.464112] ACPI: Power Button (FF) [PWRF]
[   31.507685] input: Power Button (CM) as /class/input/input4
[   31.508144] ACPI: Power Button (CM) [PWRB]
[   31.530511] input: Lid Switch as /class/input/input5
[   31.530971] ACPI: Lid Switch [LID]
[   31.661555] ACPI: Fan [FAN] (on)
[   31.737937] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   31.737949] ACPI: Processor [CPU0] (supports 8 throttling states)
[   31.772230] ACPI: Thermal Zone [THRM] (54 C)
[   15.043000] Time: acpi_pm clocksource has been installed.
[   15.059000] usbcore: registered new interface driver usbserial
[   15.059000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[   15.060000] usbcore: registered new interface driver usbserial_generic
[   15.060000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[   15.165000] eps: Detected VIA C7-M
[   15.165000] eps: Current voltage = 1004mV
[   15.165000] eps: Current multiplier = 15
[   15.165000] eps: Highest voltage = 1004mV
[   15.165000] eps: Highest multiplier = 15
[   15.165000] eps: Lowest voltage = 844mV
[   15.165000] eps: Lowest multiplier = 4
[   16.191000] kjournald starting.  Commit interval 60 seconds
[   16.192000] EXT3 FS on sda8, internal journal
[   16.192000] EXT3-fs: mounted filesystem with writeback data mode.
[   16.638000] fuse init (API version 7.8)
[   17.023000] Adding 1004020k swap on /dev/sda6.  Priority:-1 extents:1 across:1004020k
[   33.900000] eth0: link down
[   51.682000] ieee80211_crypt: registered algorithm 'CCMP'
[   52.681000] ieee80211_crypt: registered algorithm 'TKIP'