00 00000181 00003fcc 00000000 [ 16.697333] CPU: Centaur VIA Esther processor 1500MHz stepping 09 [ 16.697514] Checking 'hlt' instruction... OK. [ 16.700854] ACPI: Core revision 20070126 [ 16.707057] Parsing all Control Methods: [ 16.707273] Table [DSDT](id 0001) - 395 Objects with 44 Devices 144 Methods 14 Regions [ 16.707488] Parsing all Control Methods: [ 16.707662] Table [SSDT](id 0002) - 4 Objects with 0 Devices 1 Methods 0 Regions [ 16.707986] Parsing all Control Methods: [ 16.708164] Table [SSDT](id 0003) - 10 Objects with 0 Devices 3 Methods 0 Regions [ 16.708281] tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired [ 16.721438] evxfevnt-0091 [02] enable : Transition to ACPI mode successful [ 16.722469] ENABLING IO-APIC IRQs [ 16.722890] ..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1 [ 16.732966] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 16.733023] ...trying to set up timer (IRQ0) through the 8259A ... failed. [ 16.733115] ...trying to set up timer as Virtual Wire IRQ... works. [ 16.845808] NET: Registered protocol family 16 [ 16.846009] ACPI: bus type pci registered [ 16.846698] PCI: PCI BIOS revision 2.10 entry at 0xfd8ec, last bus=1 [ 16.846752] PCI: Using configuration type 1 [ 16.846804] Setting up standard PCI resources [ 16.858809] evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0xA [ 16.859337] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 5 Runtime GPEs in this block [ 16.860021] Completing Region/Field/Buffer/Package initialization:........................................................... [ 16.866243] Initialized 14/14 Regions 0/0 Fields 22/22 Buffers 23/26 Packages (418 nodes) [ 16.866352] Initializing Device/Processor/Thermal objects by executing _INI methods:.. [ 17.068125] Executed 2 _INI methods requiring 1 _STA executions (examined 48 objects) [ 17.068252] ACPI: Interpreter enabled [ 17.068305] ACPI: (supports S0 S3 S4 S5) [ 17.068580] ACPI: Using IOAPIC for interrupt routing [ 17.081432] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.081503] PCI: Probing PCI hardware (bus 00) [ 17.082689] Boot video device is 0000:01:00.0 [ 17.082814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.092452] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. [ 17.093220] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. [ 17.093963] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled. [ 17.094449] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. [ 17.095048] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 9 *10 11 12) [ 17.095715] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *9 10 11 12) [ 17.096357] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *5 [ 17.096970] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled. [ 17.097628] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled. [ 17.098282] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled. [ 17.098934] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled. [ 17.099688] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 9 10 11 12) *8 [ 17.101566] ACPI: Power Resource [PFAN] (off) [ 17.101639] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.101708] pnp: PnP ACPI init [ 17.106547] pnp: PnP ACPI: found 9 devices [ 17.106837] SCSI subsystem initialized [ 17.106946] libata version 2.20 loaded. [ 17.106993] PCI: Using ACPI for IRQ routing [ 17.107050] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.112232] pnp: 00:05: iomem range 0x0-0x9ffff could not be reserved [ 17.112292] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 17.112350] Time: tsc clocksource has been installed. [ 17.112411] pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 17.112468] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 17.112539] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 17.112595] pnp: 00:06: ioport range 0xfe10-0xfe11 has been reserved [ 17.112651] pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 17.142984] PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0 [ 17.143047] PCI: Bridge: 0000:00:01.0 [ 17.143098] IO window: disabled. [ 17.143152] MEM window: d1000000-d1ffffff [ 17.143207] PREFETCH window: f0000000-f3ffffff [ 17.143263] PCI: Bus 2, cardbus bridge: 0000:00:0c.0 [ 17.143315] IO window: 00002400-000024ff [ 17.143369] IO window: 00002800-000028ff [ 17.143424] PREFETCH window: 50000000-53ffffff [ 17.144223] MEM window: 54000000-57ffffff [ 17.144303] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 17.144335] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 16 [ 17.144503] NET: Registered protocol family 2 [ 17.154667] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.155005] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.156973] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 17.157557] TCP: Hash tables configured (established 131072 bind 65536) [ 17.157619] TCP reno registered [ 17.161583] io scheduler noop registered [ 17.161679] io scheduler cfq registered (default) [ 17.161800] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 17.315554] Real Time Clock Driver v1.12ac [ 17.315839] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 17.317891] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 17.318246] sata_via 0000:00:0f.0: version 2.1 [ 17.318286] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17 [ 17.318413] sata_via 0000:00:0f.0: routed to hard irq line 9 [ 17.318468] sata_via 0000:00:0f.0: enabling SATA channels (0x42) [ 17.318579] ata1: SATA max UDMA/133 cmd 0x00011430 ctl 0x00011426 bmdma 0x00011400 irq 17 [ 17.318687] ata2: SATA max UDMA/133 cmd 0x00011428 ctl 0x00011422 bmdma 0x00011408 irq 17 [ 17.318814] scsi0 : sata_via [ 17.521075] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 17.646932] Switched to NOHz mode on CPU #0 [ 17.672381] ata1.00: ATA-7: FUJITSU MHV2100BH, 00000029, max UDMA/100 [ 17.672437] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 17.677370] ata1.00: configured for UDMA/100 [ 17.677427] scsi1 : sata_via [ 17.879528] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 17.890319] ATA: abnormal status 0x7F on port 0x0001142f [ 17.890546] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5 [ 17.890748] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 17.890817] sd 0:0:0:0: [sda] Write Protect is off [ 17.890871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.890894] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.891037] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 17.891111] sd 0:0:0:0: [sda] Write Protect is off [ 17.891165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.891185] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.891250] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 17.982968] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.983112] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.983276] pata_via 0000:00:0f.1: version 0.2.1 [ 17.983498] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17 [ 17.983688] ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011410 irq 14 [ 17.983803] ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011418 irq 15 [ 17.983914] scsi2 : pata_via [ 17.984104] ata3: port disabled. ignoring. [ 17.984133] scsi3 : pata_via [ 18.326271] ata4.00: ATAPI, max UDMA/33 [ 18.518197] ata4.00: configured for UDMA/33 [ 18.521769] scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5 [ 18.551924] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 18.551991] Uniform CD-ROM driver Revision: 3.20 [ 18.552129] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 18.552216] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 18.552490] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.553666] i8042.c: Detected active multiplexing controller, rev 1.1. [ 18.554131] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.554223] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 18.554278] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 18.554332] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 18.554386] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 18.554526] mice: PS/2 mouse device common for all mice [ 18.554955] TCP cubic registered [ 18.555021] NET: Registered protocol family 1 [ 18.555080] NET: Registered protocol family 17 [ 18.555142] Using IPI Shortcut mode [ 18.556706] EXT3-fs: INFO: recovery required on readonly filesystem. [ 18.556770] EXT3-fs: write access will be enabled during recovery. [ 18.822091] input: PS/2 Mouse as /class/input/input0 [ 18.842018] input: AlpsPS/2 ALPS GlidePoint as /class/input/input1 [ 18.849948] input: AT Translated Set 2 keyboard as /class/input/input2 [ 18.924896] kjournald starting. Commit interval 5 seconds [ 18.924973] EXT3-fs: recovery complete. [ 18.941122] EXT3-fs: mounted filesystem with ordered data mode. [ 18.941252] VFS: Mounted root (ext3 filesystem) readonly. [ 18.941590] Freeing unused kernel memory: 160k freed [ 24.735030] Linux agpgart interface v0.102 (c) Dave Jones [ 24.736612] agpgart: Detected VIA VT3314 chipset [ 25.410593] usbcore: registered new interface driver usbfs [ 25.410635] usbcore: registered new interface driver hub [ 25.410671] usbcore: registered new device driver usb [ 25.412164] USB Universal Host Controller Interface driver v3.0 [ 25.715417] agpgart: AGP aperture is 256M @ 0xe0000000 [ 25.715802] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug [ 25.715971] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 [ 25.715979] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 [ 25.715996] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 18 [ 25.716019] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 25.716933] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 25.716984] uhci_hcd 0000:00:10.0: irq 18, io base 0x00001440 [ 25.717226] usb usb1: configuration #1 chosen from 1 choice [ 25.717268] hub 1-0:1.0: USB hub found [ 25.717283] hub 1-0:1.0: 2 ports detected [ 25.829877] ieee80211_crypt: registered algorithm 'NULL' [ 25.832458] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 25.832467] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 25.837964] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kd [ 25.837972] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 26.013645] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 18 [ 26.013677] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 26.013767] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 26.013804] uhci_hcd 0000:00:10.1: irq 18, io base 0x00001460 [ 26.014003] usb usb2: configuration #1 chosen from 1 choice [ 26.014051] hub 2-0:1.0: USB hub found [ 26.014066] hub 2-0:1.0: 2 ports detected [ 26.120908] PCI: Enabling device 0000:00:06.0 (0010 -> 0012) [ 26.120934] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 26.121021] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 26.202353] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 28.845998] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 28.846312] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKD] -> GSI 21 (level, low) -> IRQ 18 [ 28.846357] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 28.846410] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3 [ 28.846479] ehci_hcd 0000:00:10.4: irq 18, io mem 0xd0001000 [ 28.846493] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.846636] usb usb3: configuration #1 chosen from 1 choice [ 28.846685] hub 3-0:1.0: USB hub found [ 28.846699] hub 3-0:1.0: 4 ports detected [ 28.947823] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 28.951939] eth0: VIA Rhine II at 0xd0001400, 00:40:ca:e0:e3:22, IRQ 20. [ 28.952661] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 28.955489] Yenta: CardBus bridge found at 0000:00:0c.0 [1524:1410] [ 28.955518] Yenta: Using CSCINT to route CSC interrupts to PCI [ 28.955524] Yenta: Routing CardBus interrupts to PCI [ 28.955532] Yenta TI: socket 0000:00:0c.0, mfunc 0x01021002, devctl 0x44 [ 29.179038] Yenta: ISA IRQ mask 0x02a8, PCI irq 16 [ 29.179046] Socket status: 30000006 [ 29.181409] PCI: Enabling device 0000:00:11.6 (0000 -> 0001) [ 29.181609] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 29.181777] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 29.181785] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 29.181802] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21 [ 29.184336] PCI: Setting latency timer of device 0000:00:11.6 to 64 [ 29.688415] PCI: Enabling device 0000:00:11.5 (0000 -> 0001) [ 29.688435] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21 [ 29.688488] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 30.854638] EXT3 FS on sda7, internal journal [ 31.292776] ACPI: AC Adapter [ACAD] (on-line) [ 31.357052] ACPI: Battery Slot [BAT0] (battery present) [ 31.463663] input: Power Button (FF) as /class/input/input3 [ 31.464112] ACPI: Power Button (FF) [PWRF] [ 31.507685] input: Power Button (CM) as /class/input/input4 [ 31.508144] ACPI: Power Button (CM) [PWRB] [ 31.530511] input: Lid Switch as /class/input/input5 [ 31.530971] ACPI: Lid Switch [LID] [ 31.661555] ACPI: Fan [FAN] (on) [ 31.737937] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 31.737949] ACPI: Processor [CPU0] (supports 8 throttling states) [ 31.772230] ACPI: Thermal Zone [THRM] (54 C) [ 15.043000] Time: acpi_pm clocksource has been installed. [ 15.059000] usbcore: registered new interface driver usbserial [ 15.059000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 15.060000] usbcore: registered new interface driver usbserial_generic [ 15.060000] drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 15.165000] eps: Detected VIA C7-M [ 15.165000] eps: Current voltage = 1004mV [ 15.165000] eps: Current multiplier = 15 [ 15.165000] eps: Highest voltage = 1004mV [ 15.165000] eps: Highest multiplier = 15 [ 15.165000] eps: Lowest voltage = 844mV [ 15.165000] eps: Lowest multiplier = 4 [ 16.191000] kjournald starting. Commit interval 60 seconds [ 16.192000] EXT3 FS on sda8, internal journal [ 16.192000] EXT3-fs: mounted filesystem with writeback data mode. [ 16.638000] fuse init (API version 7.8) [ 17.023000] Adding 1004020k swap on /dev/sda6. Priority:-1 extents:1 across:1004020k [ 33.900000] eth0: link down [ 51.682000] ieee80211_crypt: registered algorithm 'CCMP' [ 52.681000] ieee80211_crypt: registered algorithm 'TKIP'