dmesg of 2.6.21.5

dmesg (text/plain), 26.70 KB, created by Kyle Brantley on 2007-06-24 05:45:27 UTC

[    0.000000] Linux version 2.6.21.5 (root@laptop) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 Sat Jun 23 23:28:31 MDT 2007
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009e800 end: 000000000009e800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009e800 size: 0000000000001800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000c0000 size: 000000000000c000 end: 00000000000cc000 type: 2
[    0.000000] copy_e820_map() start: 00000000000d8000 size: 0000000000028000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000000dbf0000 end: 000000000dcf0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000dcf0000 size: 000000000000f000 end: 000000000dcff000 type: 3
[    0.000000] copy_e820_map() start: 000000000dcff000 size: 0000000000001000 end: 000000000dd00000 type: 4
[    0.000000] copy_e820_map() start: 000000000dd00000 size: 0000000000180000 end: 000000000de80000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000de80000 size: 0000000000180000 end: 000000000e000000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000dcf0000 (usable)
[    0.000000]  BIOS-e820: 000000000dcf0000 - 000000000dcff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000000dcff000 - 000000000dd00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000000dd00000 - 000000000de80000 (usable)
[    0.000000]  BIOS-e820: 000000000de80000 - 000000000e000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 222MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 56960) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    56960
[    0.000000]   HighMem     56960 ->    56960
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    56960
[    0.000000] On node 0 totalpages: 56960
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 413 pages used for memmap
[    0.000000]   Normal zone: 52451 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F6C70, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 0DCFA391, 002C (r1 SONY   U1       20011019 PTL         0)
[    0.000000] ACPI: FACP 0DCFEF64, 0074 (r1   SONY       U1 20011019 PTL   1000000)
[    0.000000] ACPI: DSDT 0DCFA3BD, 4BA7 (r1   SONY       U1 20011019 PTL   100000B)
[    0.000000] ACPI: FACS 0DCFFFC0, 0040
[    0.000000] ACPI: BOOT 0DCFEFD8, 0028 (r1   SONY       U1 20011019 PTL         1)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f1800000)
[    0.000000] Built 1 zonelists.  Total pages: 56515
[    0.000000] Kernel command line: BOOT_IMAGE=2.6.21.5 ro root=303 video=i810fb:1024x768-16@60,vram:4,accel,mtrr,hsync1:45,hsync2:50,vsync1:60,vsync2:60
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] CPU 0 irqstacks, hard=c0709000 soft=c0708000
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Detected 596.240 MHz processor.
[20925.889555] Console: colour VGA+ 80x25
[20925.896824] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[20925.897568] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[20925.924037] Memory: 216500k/227840k available (4037k kernel code, 10776k reserved, 1887k data, 224k init, 0k highmem)
[20925.924246] virtual kernel memory layout:
[20925.924251]     fixmap  : 0xfffeb000 - 0xfffff000   (  80 kB)
[20925.924257]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[20925.924262]     vmalloc : 0xce800000 - 0xff7fe000   ( 783 MB)
[20925.924268]     lowmem  : 0xc0000000 - 0xcde80000   ( 222 MB)
[20925.924273]       .init : 0xc06cb000 - 0xc0703000   ( 224 kB)
[20925.924278]       .data : 0xc04f14d8 - 0xc06c9414   (1887 kB)
[20925.924284]       .text : 0xc0100000 - 0xc04f14d8   (4037 kB)
[20925.925104] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[20925.985525] Calibrating delay using timer specific routine.. 1192.96 BogoMIPS (lpj=596481)
[20925.985811] Security Framework v1.0.0 initialized
[20925.985920] SELinux:  Initializing.
[20925.986049] SELinux:  Starting in permissive mode
[20925.986067] selinux_register_security:  Registering secondary module capability
[20925.986229] Capability LSM initialized as secondary
[20925.986363] Mount-cache hash table entries: 512
[20925.986732] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[20925.986762] CPU: L1 I cache: 16K, L1 D cache: 16K
[20925.986897] CPU: L2 cache: 256K
[20925.986996] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[20925.987015] Intel machine check architecture supported.
[20925.987120] Intel machine check reporting enabled on CPU#0.
[20925.987255] CPU: Intel Pentium III (Coppermine) stepping 0a
[20925.987458] Checking 'hlt' instruction... OK.
[20925.990910] ACPI: Core revision 20070126
[20926.010209] Parsing all Control Methods:
[20926.010711] Table [DSDT](id 0001) - 565 Objects with 53 Devices 197 Methods 17 Regions
[20926.010984]  tbxface-0587 [02] tb_load_namespace     : ACPI Tables successfully acquired
[20926.045929] evxfevnt-0091 [02] enable                : Transition to ACPI mode successful
[20926.046857] NET: Registered protocol family 16
[20926.048056] ACPI: ACPI Dock Station Driver 
[20926.048324] ACPI: bus type pci registered
[20926.049869] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1
[20926.049975] PCI: Using configuration type 1
[20926.050074] Setting up standard PCI resources
[20926.065973] evgpeblk-0952 [04] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[20926.066234] evgpeblk-0952 [04] ev_create_gpe_block   : GPE 10 to 1F [_GPE] 2 regs on int 0x9
[20926.067747] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 Runtime GPEs in this block
[20926.068496] evgpeblk-1049 [03] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block
[20926.070074] Completing Region/Field/Buffer/Package initialization:....................................................................
[20926.080991] Initialized 17/17 Regions 5/5 Fields 27/27 Buffers 19/27 Packages (574 nodes)
[20926.081242] Initializing Device/Processor/Thermal objects by executing _INI methods:..
[20926.084487] Executed 2 _INI methods requiring 1 _STA executions (examined 57 objects)
[20926.084769] ACPI: Interpreter enabled
[20926.084869] ACPI: (supports S0 S3 S4 S5)
[20926.085217] ACPI: Using PIC for interrupt routing
[20926.156653] ACPI: PCI Root Bridge [PCI0] (0000:00)
[20926.156813] PCI: Probing PCI hardware (bus 00)
[20926.157071] Boot video device is 0000:00:02.0
[20926.157222] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[20926.157340] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[20926.158073] PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
[20926.158331] PCI: Transparent bridge - 0000:00:1e.0
[20926.158571] PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
[20926.158757] Please report the result to linux-kernel to fix this permanently
[20926.158912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[20926.159281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[20926.169719] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[20926.170886] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[20926.172018] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0
[20926.173181] ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *0
[20926.174349] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[20926.175499] ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
[20926.176124] Linux Plug and Play Support v0.97 (c) Adam Belay
[20926.176273] pnp: PnP ACPI init
[20926.192565] ACPI: undocking
[20926.260969] pnp: PnP ACPI: found 12 devices
[20926.261097] PnPBIOS: Disabled by ACPI PNP
[20926.261667] SCSI subsystem initialized
[20926.261887] libata version 2.20 loaded.
[20926.262138] usbcore: registered new interface driver usbfs
[20926.262366] usbcore: registered new interface driver hub
[20926.262626] usbcore: registered new device driver usb
[20926.262977] PCI: Using ACPI for IRQ routing
[20926.263090] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[20926.267057] Bluetooth: Core ver 2.11
[20926.267288] NET: Registered protocol family 31
[20926.267400] Bluetooth: HCI device and connection manager initialized
[20926.267508] Bluetooth: HCI socket layer initialized
[20926.267727] pnp: 00:01: iomem range 0xdf00000-0xdffffff could not be reserved
[20926.267850] pnp: 00:02: iomem range 0xff800000-0xffffffff could not be reserved
[20926.268389] Time: tsc clocksource has been installed.
[20926.268990] ieee1394: Initialized config rom entry `ip1394'
[20926.269311] PCI: Enabling device 0000:01:00.0 (0110 -> 0112)
[20926.271143] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[20926.271253] PCI: setting IRQ 9 as level-triggered
[20926.271262] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[20926.322225] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[f4101000-f41017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[20926.352756] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[20926.352896] PCI: Bus 2, cardbus bridge: 0000:01:02.0
[20926.352998]   IO window: 00003400-000034ff
[20926.353100]   IO window: 00003800-000038ff
[20926.353202]   PREFETCH window: 10000000-13ffffff
[20926.353306]   MEM window: 14000000-17ffffff
[20926.353415] PCI: Bridge: 0000:00:1e.0
[20926.353515]   IO window: 3000-3fff
[20926.353617]   MEM window: f4100000-f41fffff
[20926.354890]   PREFETCH window: 10000000-13ffffff
[20926.355011] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[20926.356837] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[20926.356963] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[20926.357213] PCI: Setting latency timer of device 0000:01:02.0 to 64
[20926.357312] NET: Registered protocol family 2
[20926.366417] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[20926.366678] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[20926.366967] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[20926.367163] TCP: Hash tables configured (established 8192 bind 8192)
[20926.367268] TCP reno registered
[20926.370934] Simple Boot Flag at 0x36 set to 0x1
[20926.371167] speedstep: frequency transition measured seems out of range (7200 nSec), falling back to a safe one of 500000 nSec.
[    0.361000] Time: acpi_pm clocksource has been installed.
[    0.361000] Switched to high resolution mode on CPU 0
[    0.361000] IA-32 Microcode Update Driver: v1.14a <[e-mail]>
[    0.361000] audit: initializing netlink socket (disabled)
[    0.361000] audit(1182663082.360:1): initialized
[    0.362000] Total HugeTLB memory allocated, 0
[    0.362000] DLM (built Jun 23 2007 22:49:36) installed
[    0.362000] Installing knfsd (copyright (C) 1996 [e-mail]).
[    0.363000] NTFS driver 2.1.28 [Flags: R/W].
[    0.363000] fuse init (API version 7.8)
[    0.364000] SELinux:  Registering netfilter hooks
[    0.364000] io scheduler noop registered
[    0.364000] io scheduler anticipatory registered (default)
[    0.364000] io scheduler deadline registered
[    0.365000] io scheduler cfq registered
[    0.367000] ACPI: AC Adapter [ACAD] (on-line)
[    0.373000] ACPI: Battery Slot [BAT1] (battery present)
[    0.374000] input: Lid Switch as /class/input/input0
[    0.374000] ACPI: Lid Switch [LID]
[    0.374000] input: Power Button (CM) as /class/input/input1
[    0.374000] ACPI: Power Button (CM) [PWRB]
[    0.375000] ACPI: Video Device [GCH0] (multi-head: yes  rom: yes  post: no)
[    0.376000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    0.376000] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.383000] ACPI: Thermal Zone [ATF0] (47 C)
[    0.383000] isapnp: Scanning for PnP cards...
[    0.740000] isapnp: No Plug & Play device found
[    0.866000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    0.867000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[    0.867000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[    0.867000] sonypi: device allocated minor is 62
[    0.867000] input: Sony Vaio Jogdial as /class/input/input2
[    0.867000] input: Sony Vaio Keys as /class/input/input3
[    0.869000] Real Time Clock Driver v1.12ac
[    0.869000] Linux agpgart interface v0.102 (c) Dave Jones
[    0.869000] agpgart: Detected an Intel i815 Chipset.
[    0.875000] agpgart: detected 4MB dedicated video ram.
[    0.882000] agpgart: AGP aperture is 64M @ 0xf8000000
[    0.882000] [drm] Initialized drm 1.1.0 20060810
[    0.882000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[    0.883000] [drm] Initialized i810 1.4.0 20030605 on minor 0
[    0.883000] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[    0.883000] Hangcheck: Using get_cycles().
[    0.886000] i810-i2c: Probe DDC1 Bus
[    0.960000] i2c_adapter i2c-0: unable to read EDID block.
[    1.077000] i2c_adapter i2c-0: unable to read EDID block.
[    1.194000] i2c_adapter i2c-0: unable to read EDID block.
[    1.237000] i810-i2c: Probe DDC2 Bus
[    1.311000] i2c_adapter i2c-1: unable to read EDID block.
[    1.341000] Clocksource tsc unstable (delta = -363232710 ns)
[    1.428000] i2c_adapter i2c-1: unable to read EDID block.
[    1.545000] i2c_adapter i2c-1: unable to read EDID block.
[    1.567000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460300c62eba]
[    1.588000] i810-i2c: Probe DDC3 Bus
[    1.588000] i810-i2c: Getting EDID from BIOS
[    1.588000] i810fb_init_pci: DDC probe successful
[    1.588000] i810fb_init_pci: Unable to get Mode Database
[    1.588000] i810fb: invalid video mode
[    1.607000] Console: switching to colour frame buffer device 128x48
[    1.610000] I810FB: fb0         : Intel(R) 815 (Internal Graphics with AGP) Framebuffer Device v0.9.0
[    1.610000] I810FB: Video RAM   : 4096K
[    1.610000] I810FB: Monitor     : H: 45-50 KHz V: 60-60 Hz
[    1.610000] I810FB: Mode        : 1024x768-16bpp@59Hz
[    1.611000] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
[    1.611000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.612000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.614000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[    1.614000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[    4.626000] floppy0: no floppy controllers found
[    4.626000] loop: loaded (max 8 devices)
[    4.628000] ACPI Sony Notebook Control Driver v0.4 successfully installed
[    4.628000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[    4.628000] e100: Copyright(c) 1999-2006 Intel Corporation
[    4.630000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[    4.630000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
[    4.655000] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:41:51:79
[    4.655000] PPP generic driver version 2.4.2
[    4.656000] PPP Deflate Compression module registered
[    4.657000] PPP BSD Compression module registered
[    4.659000] PPP MPPE Compression module registered
[    4.660000] ath_rate_amrr: 0.1 (svn r2512)
[    4.661000] ath_rate_minstrel: 1.2 (svn r2512)
[    4.662000] 
[    4.664000] Minstrel automatic rate control algorithm.
[    4.665000] 
[    4.667000] Look around rate set to 10%
[    4.668000] EWMA rolloff level set to 75%
[    4.669000] Max Segment size in the mrr set to 6000 us
[    4.671000] 
[    4.672000] ath_rate_onoe: 1.0 (svn r2512)
[    4.674000] ath_rate_sample: 1.2 (svn r2512)
[    4.675000] ath_pci: 0.9.4.5 (svn r2512)
[    4.677000] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[    4.679000] wlan: 0.8.4.2 (svn r2512)
[    4.680000] wlan: mac acl policy registered
[    4.682000] netconsole: not configured, aborting
[    4.683000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    4.685000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    4.687000] ICH2M: IDE controller at PCI slot 0000:00:1f.1
[    4.688000] ICH2M: chipset revision 3
[    4.690000] ICH2M: not 100% native mode: will probe irqs later
[    4.692000]     ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
[    4.693000]     ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
[    4.695000] Probing IDE interface ide0...
[    4.959000] hda: TOSHIBA MK1517GAP, ATA DISK drive
[    5.572000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.573000] Probing IDE interface ide1...
[    6.092000] Probing IDE interface ide1...
[    6.611000] hda: max request size: 128KiB
[    6.863000] hda: 29498112 sectors (15103 MB), CHS=29264/16/63, UDMA(100)
[    6.864000] hda: cache flushes not supported
[    6.865000]  hda: hda1 hda2 hda3
[    6.880000] ieee1394: raw1394: /dev/raw1394 device initialized
[    6.882000] Yenta: CardBus bridge found at 0000:01:02.0 [104d:80e0]
[    7.005000] Yenta: ISA IRQ mask 0x04b8, PCI irq 9
[    7.006000] Socket status: 30000820
[    7.007000] Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
[    7.008000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[    7.010000] cs: IO port probe 0x3000-0x3fff: clean.
[    7.011000] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff
[    7.012000] pcmcia: parent PCI bridge Memory window: 0x10000000 - 0x13ffffff
[    7.265000] USB Universal Host Controller Interface driver v3.0
[    7.267000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[    7.268000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[    7.270000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    7.270000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[    7.271000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[    7.272000] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001820
[    7.274000] usb usb1: configuration #1 chosen from 1 choice
[    7.275000] hub 1-0:1.0: USB hub found
[    7.276000] hub 1-0:1.0: 2 ports detected
[    7.380000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[    7.381000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
[    7.383000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[    7.383000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[    7.384000] hub 1-0:1.0: over-current change on port 2
[    7.385000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[    7.386000] uhci_hcd 0000:00:1f.4: irq 9, io base 0x00002400
[    7.388000] usb usb2: configuration #1 chosen from 1 choice
[    7.390000] hub 2-0:1.0: USB hub found
[    7.392000] hub 2-0:1.0: 2 ports detected
[    7.700000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    7.857000] usb 2-1: configuration #1 chosen from 1 choice
[    7.861000] hub 2-0:1.0: over-current change on port 2
[    7.890000] pccard: CardBus card inserted into slot 0
[    7.891000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[    7.892000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[    8.348000] ath_pci: switching rfkill capability off
[    8.349000] ath_pci: ath_pci: switching per-packet transmit power control off
[    8.351000] usbcore: registered new interface driver cdc_acm
[    8.352000] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[    8.354000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[    8.356000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[    8.357000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[    8.359000] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[    8.361000] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[    8.363000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[    8.365000] wifi0: mac 5.9 phy 4.3 radio 3.6
[    8.367000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[    8.369000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[    8.370000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[    8.372000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[    8.374000] wifi0: Use hw queue 8 for CAB traffic
[    8.376000] wifi0: Use hw queue 9 for beacons
[    8.378000] usbcore: registered new interface driver usblp
[    8.379000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[    8.381000] Initializing USB Mass Storage driver...
[    8.383000] wifi0: Atheros 5212: mem=0x14000000, irq=9
[    8.385000] scsi0 : SCSI emulation for USB Mass Storage devices
[    8.387000] usbcore: registered new interface driver usb-storage
[    8.388000] USB Mass Storage support registered.
[    8.390000] usb-storage: device found at 2
[    8.390000] usb-storage: waiting for device to settle before scanning
[    8.390000] usbcore: registered new interface driver usbhid
[    8.392000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    8.394000] usbcore: registered new interface driver usbserial
[    8.395000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[    8.397000] usbcore: registered new interface driver usbserial_generic
[    8.399000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[    8.401000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    8.405000] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.406000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    8.407000] mice: PS/2 mouse device common for all mice
[    8.437000] input: AT Translated Set 2 keyboard as /class/input/input4
[    8.442000] input: PC Speaker as /class/input/input5
[    8.704000] input: PS/2 Mouse as /class/input/input6
[    8.724000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
[    8.728000] i2c /dev entries driver
[    8.730000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [e-mail]
[    8.731000] Bluetooth: HCI USB driver ver 2.9
[    8.732000] usbcore: registered new interface driver hci_usb
[    8.733000] Bluetooth: HCI UART driver ver 2.2
[    8.734000] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
[    8.736000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[    8.737000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[    9.299000] intel8x0_measure_ac97_clock: measured 50308 usecs
[    9.300000] intel8x0: clocking to 48000
[    9.302000] ALSA device list:
[    9.303000]   #0: Intel 82801BA-ICH2 with AD1881A at irq 9
[    9.304000] oprofile: using timer interrupt.
[    9.305000] Netfilter messages via NETLINK v0.30.
[    9.307000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.308000] arp_tables: (C) 2002 David S. Miller
[    9.310000] TCP cubic registered
[    9.311000] Initializing XFRM netlink socket
[    9.313000] NET: Registered protocol family 1
[    9.314000] NET: Registered protocol family 10
[    9.316000] lo: Disabled Privacy Extensions
[    9.318000] Mobile IPv6
[    9.319000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.321000] IPv6 over IPv4 tunneling driver
[    9.323000] sit0: Disabled Privacy Extensions
[    9.324000] NET: Registered protocol family 17
[    9.326000] NET: Registered protocol family 15
[    9.328000] Bluetooth: L2CAP ver 2.8
[    9.329000] Bluetooth: L2CAP socket layer initialized
[    9.331000] Bluetooth: SCO (Voice Link) ver 0.5
[    9.332000] Bluetooth: SCO socket layer initialized
[    9.334000] Bluetooth: RFCOMM socket layer initialized
[    9.335000] Bluetooth: RFCOMM TTY layer initialized
[    9.337000] Bluetooth: RFCOMM ver 1.8
[    9.338000] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[    9.339000] Bluetooth: BNEP filters: protocol multicast
[    9.341000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    9.342000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[    9.344000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
[    9.345000] ieee80211_crypt: registered algorithm 'NULL'
[    9.345000] ieee80211_crypt: registered algorithm 'WEP'
[    9.345000] ieee80211_crypt: registered algorithm 'CCMP'
[    9.345000] ieee80211_crypt: registered algorithm 'TKIP'
[    9.345000] Using IPI Shortcut mode
[    9.411000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    9.431000] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[    9.432000] ReiserFS: hda3: using ordered data mode
[    9.443000] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    9.451000] ReiserFS: hda3: checking transaction log (hda3)
[    9.546000] ReiserFS: hda3: Using r5 hash to sort names
[    9.559000] VFS: Mounted root (reiserfs filesystem) readonly.
[    9.561000] Freeing unused kernel memory: 224k freed
[   13.390000] usb-storage: device scan complete
[   13.393000] scsi 0:0:0:0: Direct-Access     Sony     MSC-U02          1.00 PQ: 0 ANSI: 0 CCS
[   13.398000] sd 0:0:0:0: Attached scsi removable disk sda
[   13.398000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.396000] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
[   19.148000] cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
[   19.150000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   19.151000] cs: IO port probe 0x820-0x8ff: clean.
[   19.152000] cs: IO port probe 0xc00-0xcf7: clean.
[   19.153000] cs: IO port probe 0xa00-0xaff: clean.
[   22.273000] Adding 987988k swap on /dev/hda2.  Priority:-1 extents:1 across:987988k
[   49.099000] ath0: no IPv6 routers present
[  109.239000] ath0: no IPv6 routers present