The wrapper script (hopefully version independent) ...

vpnclient-lan-access (text/plain), 3.71 KB, created by Axel Dyks on 2007-06-21 20:18:11 UTC

#!/bin/bash

# define, how long ([seconds]) the monitor should wait for cisco's vpnclient to come up
timeout=120

config=/etc/opt/cisco-vpnclient/lan-access.conf; 
module_param=/sys/module/cisco_ipsec/parameters/gateway
cipsec_dev="cipsec0"

if [ "${EUID}" != "0" ]; then
	echo "Need to be root to run this command!" >&2
	echo "Trying sudo ..." >&2
	sudo "$0" $*
	exit 0
fi

if [ -z "${VPNCLIENT_LAN_ACCESS}" ]; then
	VPNCLIENT_LAN_ACCESS_GATEWAY="0.0.0.0"
	VPNCLIENT_LAN_ACCESS_NETWORKS=""
	if [ -e "${config}" ]; then
		source "${config}"
	fi
   	if [ $# -eq 2 ]; then # assuming $1="CONNECT" $2="PROFILENAME"
		profile=$2
		v=${profile}_GATEWAY
		VPNCLIENT_LAN_ACCESS_GATEWAY=${!v}
		v=${profile}_NETWORKS
		VPNCLIENT_LAN_ACCESS_NETWORKS=${!v}
	else
		exit 1
	fi
	export VPNCLIENT_LAN_ACCESS=1
	export VPNCLIENT_LAN_ACCESS_GATEWAY
	export VPNCLIENT_LAN_ACCESS_NETWORKS
	echo "VPNCLIENT_LAN_ACCESS_GATEWAY .......... ${VPNCLIENT_LAN_ACCESS_GATEWAY}" >&2
	echo "VPNCLIENT_LAN_ACCESS_NETWORKS ......... ${VPNCLIENT_LAN_ACCESS_NETWORKS}" >&2
	if [ -e "${module_param}" ]; then
		echo ${VPNCLIENT_LAN_ACCESS_GATEWAY} | tr '.' ',' >"${module_param}"
		echo "VPNCLIENT_LAN_ACCESS_GATEWAY .......... ${VPNCLIENT_LAN_ACCESS_GATEWAY}" >&2
		echo -n "VPNCLIENT_LAN_ACCESS_MODULE_PARAM ..... "
		cat ${module_param}
	fi
	# grep existing interface routes (beside of route for lo)
	# and export them to environment
    VPNCLIENT_LAN_ACCESS_DEVICE_ROUTES=`route -n | grep -E '^[0-9.]+ +0\.0\.0\.0' | grep -v 'lo$' | \
		sed -re 's/^(\S++)\s+0\.0\.0\.0\s+(\S+)\s+.*\s+(\S+)$/\1:\2:\3/' | tr '\n' ' '`
	export VPNCLIENT_LAN_ACCESS_DEVICE_ROUTES
	echo "VPNCLIENT_LAN_ACCESS_DEVICE_ROUTES .... ${VPNCLIENT_LAN_ACCESS_DEVICE_ROUTES}" >&2
    VPNCLIENT_LAN_ACCESS_DEFAULT_ROUTES=`route -n | grep -E '^0\.0\.0\.0' | grep -v 'lo$' | \
		sed -re 's/^0\.0\.0\.0\s+(\S+)\s+0\.0\.0\.0\s+\S+\s+(\S+)\s+\S+\s+\S+\s+(\S+)$/\1:\2:\3/' | tr '\n' ' '`
	export VPNCLIENT_LAN_ACCESS_DEFAULT_ROUTES
	echo "VPNCLIENT_LAN_ACCESS_DEFAULT_ROUTES ... ${VPNCLIENT_LAN_ACCESS_DEFAULT_ROUTES}" >&2
	echo "Re-launching myself in \"monitor\" mode ..." >&2
	( $0 )&
	# now launch origional "vpnclient"
	orig_vpnclient="`dirname $0`/vpnclient" 
	echo "Running original vpnclient: ${orig_vpnclient} $*" >&2
	echo "===================================================================" >&2
	${orig_vpnclient} $*
	exit 0
fi

# Wait until ${timeout} for cisco's vpnclient to come up
i=0
while true; do
	sleep 1
	/sbin/route -n | grep -E '^0\.0\.0\.0' | grep -q "${cipsec_dev}$" && break
	(( i++ ))
	[ ${i} -lt ${timeout} ] || exit 1
done
sleep 1

# restore original devices routes (read from environment)
for r in ${VPNCLIENT_LAN_ACCESS_DEVICE_ROUTES}; do
	net=`echo ${r} | sed -re 's/^([^:]+):([^:]+):([^:]+)$/\1/'`
	mask=`echo ${r} | sed -re 's/^([^:]+):([^:]+):([^:]+)$/\2/'`
	dev=`echo ${r} | sed -re 's/^([^:]+):([^:]+):([^:]+)$/\3/'`
	/sbin/route add -net "${net}" netmask "${mask}" dev "${dev}"
done

# retrieve gateway's private address from default route on "${cipsec_dev}"
cipsec_gw=`route -n | grep -E '^0\.0\.0\.0' | grep "${cipsec_dev}$" | \
		sed -re 's/^0\.0\.0\.0\s+(\S+)\s+.*$/\1/'`

# delete default route on "${cipsec_dev}" 
/sbin/route del default dev "${cipsec_dev}"

# add routes to networks behind tunnel (read from environment/config)
for n in ${VPNCLIENT_LAN_ACCESS_NETWORKS}; do
	/sbin/route add -net "${n}" gw "${cipsec_gw}" dev "${cipsec_dev}"
done

# restore original default routes (read from environment)
for r in ${VPNCLIENT_LAN_ACCESS_DEFAULT_ROUTES}; do
	gw=`echo ${r} | sed -re 's/^([^:]+):([^:]+):([^:]+)$/\1/'`
	metric=`echo ${r} | sed -re 's/^([^:]+):([^:]+):([^:]+)$/\2/'`
	dev=`echo ${r} | sed -re 's/^([^:]+):([^:]+):([^:]+)$/\3/'`
	/sbin/route add default gw "${gw}" metric "${metric}" dev "${dev}"
done