Transcript of tests related to comment 26

test_transcript.txt (text/plain), 7.14 KB, created by Luud Heck on 2007-05-08 20:57:49 UTC

(In reference to comment 26 of https://bugs.gentoo.org/show_bug.cgi?id=137831)

Testing sequence with system log messages:
------------------------------------------

>> Connect device and turn on (a Trekstor 320GB USB 2.0 External HDD)

May  8 22:36:32 vanadium usb 1-3.1: new high speed USB device using ehci_hcd and address 3
May  8 22:36:32 vanadium usb 1-3.1: configuration #1 chosen from 1 choice
May  8 22:36:32 vanadium scsi0 : SCSI emulation for USB Mass Storage devices
May  8 22:36:32 vanadium usb-storage: device found at 3
May  8 22:36:32 vanadium usb-storage: waiting for device to settle before scanning
May  8 22:36:37 vanadium scsi 0:0:0:0: Direct-Access     WDC WD30 00JB-00KFA0      0811 PQ: 0 ANSI: 0
May  8 22:36:37 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:36:37 vanadium sda: test WP failed, assume Write Enabled
May  8 22:36:37 vanadium sda: assuming drive cache: write through
May  8 22:36:37 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:36:37 vanadium sda: test WP failed, assume Write Enabled
May  8 22:36:37 vanadium sda: assuming drive cache: write through
May  8 22:36:37 vanadium sda: sda1
May  8 22:36:37 vanadium sd 0:0:0:0: Attached scsi disk sda
May  8 22:36:37 vanadium sd 0:0:0:0: Attached scsi generic sg0 type 0
May  8 22:36:37 vanadium usb-storage: device scan complete

>> Password prompt appears, entering password

May  8 22:37:41 vanadium kjournald starting.  Commit interval 5 seconds
May  8 22:37:41 vanadium EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
May  8 22:37:41 vanadium EXT3 FS on dm-11, internal journal
May  8 22:37:41 vanadium EXT3-fs: mounted filesystem with ordered data mode.
May  8 22:37:41 vanadium hald: mounted /dev/mapper/luks_crypto_20e799a3-8a14-44cb-b660-4a1d0997c5be on behalf of uid 1001

>> Device appears on desktop and nautilus opens it.

>> Unmounting disk:

May  8 22:38:30 vanadium hald: unmounted /dev/mapper/luks_crypto_20e799a3-8a14-44cb-b660-4a1d0997c5be from '/media/Trekstor' on behalf of uid 1001

>> Device is still visible in nautilus, but we cannot mount it.

>> Turn of device:

May  8 22:40:02 vanadium usb 1-3.1: USB disconnect, address 3
May  8 22:40:02 vanadium udevd-event[5809]: run_program: exec of program '/lib/udev/hal_unmount' failed
May  8 22:40:02 vanadium udevd-event[5813]: run_program: exec of program '/lib/udev/hal_unmount' failed

>> Device is still visible in nautilus, but we cannot mount it.

>> Turn device back on:

May  8 22:43:26 vanadium usb 1-3.1: new high speed USB device using ehci_hcd and address 4
May  8 22:43:26 vanadium usb 1-3.1: configuration #1 chosen from 1 choice
May  8 22:43:26 vanadium scsi1 : SCSI emulation for USB Mass Storage devices
May  8 22:43:26 vanadium usb-storage: device found at 4
May  8 22:43:26 vanadium usb-storage: waiting for device to settle before scanning
May  8 22:43:31 vanadium scsi 1:0:0:0: Direct-Access     WDC WD30 00JB-00KFA0      0811 PQ: 0 ANSI: 0
May  8 22:43:31 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:43:31 vanadium sda: test WP failed, assume Write Enabled
May  8 22:43:31 vanadium sda: assuming drive cache: write through
May  8 22:43:31 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:43:31 vanadium sda: test WP failed, assume Write Enabled
May  8 22:43:31 vanadium sda: assuming drive cache: write through
May  8 22:43:31 vanadium sda: sda1
May  8 22:43:31 vanadium sd 1:0:0:0: Attached scsi disk sda
May  8 22:43:31 vanadium sd 1:0:0:0: Attached scsi generic sg0 type 0
May  8 22:43:31 vanadium usb-storage: device scan complete

>> And... nothing!
>> We cannot mount the device and no password prompt shows. It seems gnome think the device was never gone, but it cannot mount the device either.


Testing sequence with hal_unmount program:
------------------------------------------
I tried adding the /lub/udev/hal_unmount program back to the system. Although this does get rid of the '/lib/udev/hal_unmount' failed messages, it does not solve the real problem.


>> Connect device and turn on (a Trekstor 320GB USB 2.0 External HDD)

May  8 22:25:04 vanadium usb 1-3.1: new high speed USB device using ehci_hcd and address 3
May  8 22:25:04 vanadium usb 1-3.1: configuration #1 chosen from 1 choice
May  8 22:25:04 vanadium scsi0 : SCSI emulation for USB Mass Storage devices
May  8 22:25:04 vanadium usb-storage: device found at 3
May  8 22:25:04 vanadium usb-storage: waiting for device to settle before scanning
May  8 22:25:09 vanadium scsi 0:0:0:0: Direct-Access     WDC WD30 00JB-00KFA0      0811 PQ: 0 ANSI: 0
May  8 22:25:09 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:25:09 vanadium sda: test WP failed, assume Write Enabled
May  8 22:25:09 vanadium sda: assuming drive cache: write through
May  8 22:25:09 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:25:09 vanadium sda: test WP failed, assume Write Enabled
May  8 22:25:09 vanadium sda: assuming drive cache: write through
May  8 22:25:09 vanadium sda: sda1
May  8 22:25:09 vanadium sd 0:0:0:0: Attached scsi disk sda
May  8 22:25:09 vanadium sd 0:0:0:0: Attached scsi generic sg0 type 0
May  8 22:25:09 vanadium usb-storage: device scan complete

>> Password prompt appears, entering password

May  8 22:25:23 vanadium kjournald starting.  Commit interval 5 seconds
May  8 22:25:23 vanadium EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
May  8 22:25:23 vanadium EXT3 FS on dm-11, internal journal
May  8 22:25:23 vanadium EXT3-fs: mounted filesystem with ordered data mode.
May  8 22:25:23 vanadium hald: mounted /dev/mapper/luks_crypto_20e799a3-8a14-44cb-b660-4a1d0997c5be on behalf of uid 1001

>> Device appears on desktop and nautilus opens it.

>> Unmounting disk:

May  8 22:28:02 vanadium hald: unmounted /dev/mapper/luks_crypto_20e799a3-8a14-44cb-b660-4a1d0997c5be from '/media/Trekstor' on behalf of uid 1001

>> Turn of device:

May  8 22:29:11 vanadium usb 1-3.1: USB disconnect, address 3

>> Turn on again:

May  8 22:29:43 vanadium usb 1-3.1: new high speed USB device using ehci_hcd and address 4
May  8 22:29:43 vanadium usb 1-3.1: configuration #1 chosen from 1 choice
May  8 22:29:43 vanadium scsi1 : SCSI emulation for USB Mass Storage devices
May  8 22:29:43 vanadium usb-storage: device found at 4
May  8 22:29:43 vanadium usb-storage: waiting for device to settle before scanning
May  8 22:29:48 vanadium scsi 1:0:0:0: Direct-Access     WDC WD30 00JB-00KFA0      0811 PQ: 0 ANSI: 0
May  8 22:29:48 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:29:48 vanadium sda: test WP failed, assume Write Enabled
May  8 22:29:48 vanadium sda: assuming drive cache: write through
May  8 22:29:48 vanadium SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
May  8 22:29:48 vanadium sda: test WP failed, assume Write Enabled
May  8 22:29:48 vanadium sda: assuming drive cache: write through
May  8 22:29:48 vanadium sda: sda1
May  8 22:29:48 vanadium sd 1:0:0:0: Attached scsi disk sda
May  8 22:29:48 vanadium sd 1:0:0:0: Attached scsi generic sg0 type 0
May  8 22:29:48 vanadium usb-storage: device scan complete

>> No password promt. Cannot mount.