Attachment 118002 Details for Bug 166512 – dmesg for kernel 2.6.21-gentoo

dmesg for kernel 2.6.21-gentoo

dmesg.txt (text/plain), 15.53 KB, created by Cory Coager on 2007-05-02 23:52:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Cory Coager

Created: 2007-05-02 23:52:54 UTC

Size: 15.53 KB

patch

obsolete

>[   25.996860] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
>[   25.996865] PCI: Setting latency timer of device 0000:00:02.0 to 64
>[   25.996877] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
>[   25.996882] PCI: Setting latency timer of device 0000:00:03.0 to 64
>[   25.996893] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35
>[   25.996899] PCI: Setting latency timer of device 0000:00:03.1 to 64
>[   25.996910] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39
>[   25.996915] PCI: Setting latency timer of device 0000:00:03.2 to 64
>[   25.996926] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43
>[   25.996932] PCI: Setting latency timer of device 0000:00:03.3 to 64
>[   25.996953] NET: Registered protocol family 2
>[   25.997299] Time: tsc clocksource has been installed.
>[   26.006302] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>[   26.006503] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>[   26.008411] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[   26.008857] TCP: Hash tables configured (established 131072 bind 65536)
>[   26.008861] TCP reno registered
>[   26.011383] checking if image is initramfs... it is
>[   26.194844] Freeing initrd memory: 4318k freed
>[   26.199259] VFS: Disk quotas dquot_6.5.1
>[   26.199268] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[   26.199307] SGI XFS with ACLs, large block/inode numbers, no debug enabled
>[   26.199389] SGI XFS Quota Management subsystem
>[   26.199416] io scheduler noop registered
>[   26.199418] io scheduler anticipatory registered
>[   26.199420] io scheduler deadline registered
>[   26.199429] io scheduler cfq registered (default)
>[   26.199720] PCI: Setting latency timer of device 0000:00:02.0 to 64
>[   26.199751] assign_interrupt_mode Found MSI capability
>[   26.199795] Allocate Port Service[0000:00:02.0:pcie00]
>[   26.199821] Allocate Port Service[0000:00:02.0:pcie01]
>[   26.199843] Allocate Port Service[0000:00:02.0:pcie03]
>[   26.199912] PCI: Setting latency timer of device 0000:00:03.0 to 64
>[   26.199944] assign_interrupt_mode Found MSI capability
>[   26.199979] Allocate Port Service[0000:00:03.0:pcie00]
>[   26.200004] Allocate Port Service[0000:00:03.0:pcie01]
>[   26.200026] Allocate Port Service[0000:00:03.0:pcie03]
>[   26.200089] PCI: Setting latency timer of device 0000:00:03.1 to 64
>[   26.200120] assign_interrupt_mode Found MSI capability
>[   26.200156] Allocate Port Service[0000:00:03.1:pcie00]
>[   26.200179] Allocate Port Service[0000:00:03.1:pcie01]
>[   26.200203] Allocate Port Service[0000:00:03.1:pcie03]
>[   26.200261] PCI: Setting latency timer of device 0000:00:03.2 to 64
>[   26.200292] assign_interrupt_mode Found MSI capability
>[   26.200327] Allocate Port Service[0000:00:03.2:pcie00]
>[   26.200355] Allocate Port Service[0000:00:03.2:pcie01]
>[   26.200378] Allocate Port Service[0000:00:03.2:pcie03]
>[   26.200437] PCI: Setting latency timer of device 0000:00:03.3 to 64
>[   26.200469] assign_interrupt_mode Found MSI capability
>[   26.200504] Allocate Port Service[0000:00:03.3:pcie00]
>[   26.200532] Allocate Port Service[0000:00:03.3:pcie01]
>[   26.200557] Allocate Port Service[0000:00:03.3:pcie03]
>[   26.200763] Evaluate _OSC Set fails. Status = 0x0005
>[   26.200767] Evaluate _OSC Set fails. Status = 0x0005
>[   26.200769] aer_init: AER service init fails - Run ACPI _OSC fails
>[   26.200773] aer: probe of 0000:00:02.0:pcie01 failed with error 2
>[   26.200857] Evaluate _OSC Set fails. Status = 0x0005
>[   26.200861] Evaluate _OSC Set fails. Status = 0x0005
>[   26.200863] aer_init: AER service init fails - Run ACPI _OSC fails
>[   26.200866] aer: probe of 0000:00:03.0:pcie01 failed with error 2
>[   26.200990] Evaluate _OSC Set fails. Status = 0x0005
>[   26.200993] Evaluate _OSC Set fails. Status = 0x0005
>[   26.200996] aer_init: AER service init fails - Run ACPI _OSC fails
>[   26.200999] aer: probe of 0000:00:03.1:pcie01 failed with error 2
>[   26.201082] Evaluate _OSC Set fails. Status = 0x0005
>[   26.201086] Evaluate _OSC Set fails. Status = 0x0005
>[   26.201088] aer_init: AER service init fails - Run ACPI _OSC fails
>[   26.201091] aer: probe of 0000:00:03.2:pcie01 failed with error 2
>[   26.201174] Evaluate _OSC Set fails. Status = 0x0005
>[   26.201178] Evaluate _OSC Set fails. Status = 0x0005
>[   26.201180] aer_init: AER service init fails - Run ACPI _OSC fails
>[   26.201183] aer: probe of 0000:00:03.3:pcie01 failed with error 2
>[   26.221366] Real Time Clock Driver v1.12ac
>[   26.221470] Linux agpgart interface v0.102 (c) Dave Jones
>[   26.221473] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
>[   26.221476] Hangcheck: Using get_cycles().
>[   26.221564] vesafb: framebuffer at 0xc8000000, mapped to 0xffffc20010180000, using 3072k, total 131072k
>[   26.221568] vesafb: mode is 1024x768x16, linelength=2048, pages=1
>[   26.221570] vesafb: scrolling: redraw
>[   26.221573] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>[   26.234555] Console: switching to colour frame buffer device 128x48
>[   26.247997] fbsplash: console 0 using theme 'MetallTux'
>[   26.248319] fb0: VESA VGA frame buffer device
>[   26.248411] input: Power Button (FF) as /class/input/input0
>[   26.248421] ACPI: Power Button (FF) [PWRF]
>[   26.248478] input: Power Button (CM) as /class/input/input1
>[   26.248482] ACPI: Power Button (CM) [PWRB]
>[   26.248551] ACPI: Fan [FAN] (on)
>[   26.249513] ACPI: Thermal Zone [THRM] (34 C)
>[   26.249517] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
>[   26.249623] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[   26.250090] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[   26.250303] parport: PnPBIOS parport detected.
>[   26.250325] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
>[   26.250814] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>[   26.250995] loop: loaded (max 8 devices)
>[   26.251093] netconsole: not configured, aborting
>[   26.251177] sata_via 0000:00:0f.0: version 2.1
>[   26.251465] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>[   26.251472] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>[   26.251488] sata_via 0000:00:0f.0: routed to hard irq line 11
>[   26.251551] ata1: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001bc02 bmdma 0x000000000001c800 irq 20
>[   26.251583] ata2: SATA max UDMA/133 cmd 0x000000000001c000 ctl 0x000000000001c402 bmdma 0x000000000001c808 irq 20
>[   26.251598] scsi0 : sata_via
>[   26.451360] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>[   26.461995] ATA: abnormal status 0x7F on port 0x000000000001b807
>[   26.462004] scsi1 : sata_via
>[   26.661922] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>[   26.672557] ATA: abnormal status 0x7F on port 0x000000000001c007
>[   26.672600] pata_via 0000:00:0f.1: version 0.2.1
>[   26.672620] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
>[   26.672657] ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001d000 irq 14
>[   26.672700] ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001d008 irq 15
>[   26.672739] scsi2 : pata_via
>[   26.825797] ata3.00: ATA-6: HDS722525VLAT80, V36OA6MA, max UDMA/100
>[   26.825801] ata3.00: 488397168 sectors, multi 16: LBA48 
>[   26.831776] ata3.00: configured for UDMA/33
>[   26.831780] scsi3 : pata_via
>[   27.136193] ata4.00: ATAPI, max UDMA/33
>[   27.292850] ata4.00: configured for UDMA/33
>[   27.292928] scsi 2:0:0:0: Direct-Access     ATA      HDS722525VLAT80  V36O PQ: 0 ANSI: 5
>[   27.292995] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>[   27.293004] sda: Write Protect is off
>[   27.293006] sda: Mode Sense: 00 3a 00 00
>[   27.293016] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   27.293054] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>[   27.293061] sda: Write Protect is off
>[   27.293063] sda: Mode Sense: 00 3a 00 00
>[   27.293073] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   27.293076]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>[   27.311316] sd 2:0:0:0: Attached scsi disk sda
>[   27.311364] sd 2:0:0:0: Attached scsi generic sg0 type 0
>[   27.312908] scsi 3:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5
>[   27.313864] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>[   27.313867] Uniform CD-ROM driver Revision: 3.20
>[   27.313907] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[   27.313946] sr 3:0:0:0: Attached scsi generic sg1 type 5
>[   27.314025] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[   27.314286] serio: i8042 KBD port at 0x60,0x64 irq 1
>[   27.314307] serio: i8042 AUX port at 0x60,0x64 irq 12
>[   27.314392] mice: PS/2 mouse device common for all mice
>[   27.339971] input: AT Translated Set 2 keyboard as /class/input/input2
>[   27.344865] TCP cubic registered
>[   27.344872] NET: Registered protocol family 1
>[   27.344875] NET: Registered protocol family 17
>[   27.344983] Freeing unused kernel memory: 196k freed
>[   27.359413] ata1: soft resetting port
>[   27.519803] ATA: abnormal status 0x7F on port 0x000000000001b807
>[   27.519815] ata1: EH complete
>[   27.539968] logips2pp: Detected unknown logitech mouse model 1
>[   27.579651] usbcore: registered new interface driver usbfs
>[   27.579690] usbcore: registered new interface driver hub
>[   27.579719] usbcore: registered new device driver usb
>[   27.581862] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>[   27.581870] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>[   27.581885] ehci_hcd 0000:00:10.4: EHCI Host Controller
>[   27.581938] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>[   27.581984] ehci_hcd 0000:00:10.4: irq 21, io mem 0xde025000
>[   27.581991] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[   27.582105] usb usb1: configuration #1 chosen from 1 choice
>[   27.582137] hub 1-0:1.0: USB hub found
>[   27.582144] hub 1-0:1.0: 8 ports detected
>[   28.043073] usbcore: registered new interface driver hiddev
>[   28.043095] usbcore: registered new interface driver usbhid
>[   28.043098] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>[   28.044216] input: PS/2 Logitech Mouse as /class/input/input3
>[   28.055753] Initializing USB Mass Storage driver...
>[   28.055785] usbcore: registered new interface driver usb-storage
>[   28.055788] USB Mass Storage support registered.
>[   28.068117] USB Universal Host Controller Interface driver v3.0
>[   28.068186] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>[   28.068198] uhci_hcd 0000:00:10.0: UHCI Host Controller
>[   28.068233] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>[   28.068257] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>[   28.068377] usb usb2: configuration #1 chosen from 1 choice
>[   28.068409] hub 2-0:1.0: USB hub found
>[   28.068416] hub 2-0:1.0: 2 ports detected
>[   28.168884] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>[   28.168891] uhci_hcd 0000:00:10.1: UHCI Host Controller
>[   28.168918] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>[   28.168936] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>[   28.169035] usb usb3: configuration #1 chosen from 1 choice
>[   28.169063] hub 3-0:1.0: USB hub found
>[   28.169069] hub 3-0:1.0: 2 ports detected
>[   28.269653] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>[   28.269660] uhci_hcd 0000:00:10.2: UHCI Host Controller
>[   28.269685] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>[   28.269703] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
>[   28.269801] usb usb4: configuration #1 chosen from 1 choice
>[   28.269829] hub 4-0:1.0: USB hub found
>[   28.269834] hub 4-0:1.0: 2 ports detected
>[   28.370442] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
>[   28.370449] uhci_hcd 0000:00:10.3: UHCI Host Controller
>[   28.370473] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>[   28.370491] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e000
>[   28.370589] usb usb5: configuration #1 chosen from 1 choice
>[   28.370616] hub 5-0:1.0: USB hub found
>[   28.370622] hub 5-0:1.0: 2 ports detected
>[   28.478174] usb 2-2: new full speed USB device using uhci_hcd and address 2
>[   28.483941] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>[   28.512863] ieee1394: Initialized config rom entry `ip1394'
>[   28.527425] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
>[   28.577622] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[de024000-de0247ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>[   28.625340] usb 2-2: configuration #1 chosen from 1 choice
>[   28.634552] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>[   28.937198] usb 3-2: new low speed USB device using uhci_hcd and address 2
>[   29.079336] usb 3-2: configuration #1 chosen from 1 choice
>[   29.729059] EXT3-fs: INFO: recovery required on readonly filesystem.
>[   29.729063] EXT3-fs: write access will be enabled during recovery.
>[   29.830759] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000221a29]
>[   30.854679] kjournald starting.  Commit interval 5 seconds
>[   30.854693] EXT3-fs: recovery complete.
>[   30.855509] EXT3-fs: mounted filesystem with ordered data mode.
>[   32.666890] Adding 514072k swap on /dev/sda3.  Priority:-1 extents:1 across:514072k
>[   34.369160] EXT3 FS on sda5, internal journal
>[   37.992883] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 36 (level, low) -> IRQ 36
>[   37.992898] PCI: Setting latency timer of device 0000:05:00.0 to 64
>[   37.992937] sky2 0000:05:00.0: v1.14 addr 0xdd000000 irq 36 Yukon-EC (0xb6) rev 2
>[   37.993046] APIC error on CPU0: 00(08)
>[   38.092792] sky2 0000:05:00.0: No interrupt generated using MSI, switching to INTx mode.
>[   38.102144] sky2 eth0: addr 00:11:d8:c4:42:91
>[   38.182428] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
>[   38.182464] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
>[   38.182467] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
>[   38.182470] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>[   39.252996] XFS mounting filesystem sda6
>[   39.344846] Starting XFS recovery on filesystem: sda6 (logdev: internal)
>[   39.500381] Ending XFS recovery on filesystem: sda6 (logdev: internal)
>[   42.525890] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
>[   46.918260] fbsplash: console 0 using theme 'MetallTux'
>[   46.921373] fbsplash: switched splash state to 'on' on console 0
>[   48.060306] sky2 eth0: enabling interface
>[   48.062117] sky2 eth0: ram buffer 48K
>[   48.072042] sky2 eth0: disabling interface
>[   48.114347] sky2 eth0: enabling interface
>[   48.116158] sky2 eth0: ram buffer 48K
>[   50.543960] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
>[   64.329111] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   64.491461] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>[   64.491604] NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
>[   64.491608] NFSD: starting 90-second grace period
>[   66.166485] Time: acpi_pm clocksource has been installed.

Actions: View

Attachments on bug 166512: 109949 | 109951 | 109953 | 109954 | 118001 | 118002