DMESG of the FEDORA configuration

dmesg.txt (text/plain), 37.37 KB, created by Eric GRUSON on 2007-04-20 08:06:05 UTC

Linux version 2.6.20-1.3023.fc7 ([e-mail]) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Sun Mar 25 21:47:10 EDT 2007
Command line: initrd=initrd.img  ro quiet root=CDLABEL=Fedora-7-Test3-Live-x86_64 rootfstype=iso9660 livecd BOOT_IMAGE=vmlinuz 
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
 BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
 BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245488) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F7C70, 0014 (r0 K8M890)
ACPI: RSDT 3BEF3040, 0030 (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3BEF30C0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3BEF3180, 66C3 (r1 K8M890 AWRDACPI     1000 MSFT  100000E)
ACPI: FACS 3BEF0000, 0040
ACPI: MCFG 3BEF9980, 003C (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
ACPI: APIC 3BEF98C0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD        0)
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003bef0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 245488) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003bef0000
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   245488
On node 0 totalpages: 245391
  DMA zone: 88 pages used for memmap
  DMA zone: 2378 pages reserved
  DMA zone: 1533 pages, LIFO batch:0
  DMA32 zone: 5186 pages used for memmap
  DMA32 zone: 236206 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3bf00000:a4100000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 44672 bytes of per cpu data
Built 1 zonelists.  Total pages: 237739
Kernel command line: initrd=initrd.img  ro quiet root=CDLABEL=Fedora-7-Test3-Live-x86_64 rootfstype=iso9660 livecd BOOT_IMAGE=vmlinuz 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2200.012 MHz processor.
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1648 kB
 per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ d0000000 size 128 MB
Memory: 943308k/981952k available (2461k kernel code, 38256k reserved, 1444k data, 332k init)
Calibrating delay using timer specific routine.. 4401.65 BogoMIPS (lpj=2200829)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
lockdep: not fixing up alternatives.
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12500067
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
sizeof(vma)=176 bytes
sizeof(page)=88 bytes
sizeof(inode)=1008 bytes
sizeof(dentry)=248 bytes
sizeof(ext3inode)=1376 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=248 bytes
sizeof(task_struct)=3776 bytes
PM: Adding info for No Bus:platform
NET: Registered protocol family 16
PM: Adding info for No Bus:vtcon0
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: No mmconfig possible on device 00:18
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PM: Adding info for acpi:acpi_system:00
PM: Adding info for acpi:button_power:00
PM: Adding info for acpi:ACPI0007:00
PM: Adding info for acpi:ACPI0007:01
PM: Adding info for acpi:device:00
PM: Adding info for acpi:PNP0C0C:00
PM: Adding info for acpi:PNP0A08:00
PM: Adding info for acpi:PNP0C02:00
PM: Adding info for acpi:device:01
PM: Adding info for acpi:device:02
PM: Adding info for acpi:device:03
PM: Adding info for acpi:device:04
PM: Adding info for acpi:device:05
PM: Adding info for acpi:device:06
PM: Adding info for acpi:device:07
PM: Adding info for acpi:device:08
PM: Adding info for acpi:device:09
PM: Adding info for acpi:device:0a
PM: Adding info for acpi:device:0b
PM: Adding info for acpi:device:0c
PM: Adding info for acpi:device:0d
PM: Adding info for acpi:device:0e
PM: Adding info for acpi:device:0f
PM: Adding info for acpi:device:10
PM: Adding info for acpi:device:11
PM: Adding info for acpi:device:12
PM: Adding info for acpi:device:13
PM: Adding info for acpi:device:14
PM: Adding info for acpi:device:15
PM: Adding info for acpi:device:16
PM: Adding info for acpi:device:17
PM: Adding info for acpi:device:18
PM: Adding info for acpi:device:19
PM: Adding info for acpi:device:1a
PM: Adding info for acpi:device:1b
PM: Adding info for acpi:device:1c
PM: Adding info for acpi:device:1d
PM: Adding info for acpi:device:1e
PM: Adding info for acpi:device:1f
PM: Adding info for acpi:device:20
PM: Adding info for acpi:device:21
PM: Adding info for acpi:device:22
PM: Adding info for acpi:device:23
PM: Adding info for acpi:device:24
PM: Adding info for acpi:device:25
PM: Adding info for acpi:device:26
PM: Adding info for acpi:device:27
PM: Adding info for acpi:device:28
PM: Adding info for acpi:device:29
PM: Adding info for acpi:device:2a
PM: Adding info for acpi:device:2b
PM: Adding info for acpi:PNP0C02:01
PM: Adding info for acpi:device:2c
PM: Adding info for acpi:device:2d
PM: Adding info for acpi:PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:07
PM: Adding info for acpi:PNP0C02:02
PM: Adding info for acpi:PNP0000:00
PM: Adding info for acpi:PNP0200:00
PM: Adding info for acpi:PNP0100:00
PM: Adding info for acpi:PNP0B00:00
PM: Adding info for acpi:PNP0800:00
PM: Adding info for acpi:PNP0C04:00
PM: Adding info for acpi:PNP0700:00
PM: Adding info for acpi:PNP0501:00
PM: Adding info for acpi:PNP0501:01
PM: Adding info for acpi:PNP0400:00
PM: Adding info for acpi:PNP0C02:03
PM: Adding info for acpi:PNP0C01:00
PM: Adding info for acpi:thermal:00
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
0000:00:0f.1: cannot adjust BAR0 (not I/O)
0000:00:0f.1: cannot adjust BAR1 (not I/O)
0000:00:0f.1: cannot adjust BAR2 (not I/O)
0000:00:0f.1: cannot adjust BAR3 (not I/O)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:00.1
PM: Adding info for pci:0000:00:00.2
PM: Adding info for pci:0000:00:00.3
PM: Adding info for pci:0000:00:00.4
PM: Adding info for pci:0000:00:00.5
PM: Adding info for pci:0000:00:00.7
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:03.0
PM: Adding info for pci:0000:00:0f.0
PM: Adding info for pci:0000:00:0f.1
PM: Adding info for pci:0000:00:10.0
PM: Adding info for pci:0000:00:10.1
PM: Adding info for pci:0000:00:10.2
PM: Adding info for pci:0000:00:10.3
PM: Adding info for pci:0000:00:10.4
PM: Adding info for pci:0000:00:11.0
PM: Adding info for pci:0000:00:11.7
PM: Adding info for pci:0000:00:12.0
PM: Adding info for pci:0000:00:13.0
PM: Adding info for pci:0000:00:13.1
PM: Adding info for pci:0000:00:18.0
PM: Adding info for pci:0000:00:18.1
PM: Adding info for pci:0000:00:18.2
PM: Adding info for pci:0000:00:18.3
PM: Adding info for pci:0000:01:00.0
PM: Adding info for pci:0000:04:01.0
PM: Adding info for pci:0000:05:05.0
PM: Adding info for pci:0000:05:05.2
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
PM: Adding info for pnp:00:0a
PM: Adding info for pnp:00:0b
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
pnp: PnP ACPI: found 14 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
agpgart: Detected AGP bridge 0
PM: Adding info for No Bus:agpgart
agpgart: AGP aperture is 128M @ 0xd0000000
Time: tsc clocksource has been installed.
pnp: 00:01: ioport range 0x400-0x47f has been reserved
pnp: 00:01: ioport range 0x500-0x50f has been reserved
pnp: 00:02: iomem range 0xf0000000-0xf0000fff has been reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0d: iomem range 0xcc000-0xcffff has been reserved
pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:port
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
PCI: Bridge: 0000:00:01.0
  IO window: e000-efff
  MEM window: db000000-dcffffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:02.0
  IO window: d000-dfff
  MEM window: dfc00000-dfcfffff
  PREFETCH window: dfb00000-dfbfffff
PCI: Bridge: 0000:00:03.0
  IO window: c000-cfff
  MEM window: dfe00000-dfefffff
  PREFETCH window: dfd00000-dfdfffff
PCI: Bridge: 0000:00:13.0
  IO window: b000-bfff
  MEM window: dfa00000-dfafffff
  PREFETCH window: df900000-df9fffff
PCI: Bridge: 0000:00:13.1
  IO window: a000-afff
  MEM window: dd000000-deffffff
  PREFETCH window: df800000-df8fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4453k freed
PM: Adding info for No Bus:mcelog
PM: Adding info for No Bus:msr0
PM: Adding info for No Bus:cpu0
PM: Adding info for platform:pcspkr
PM: Adding info for No Bus:snapshot
audit: initializing netlink socket (disabled)
audit(1177057306.736:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key FE74902986D88E82
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PM: Adding info for pci_express:0000:00:02.0:pcie00
Allocate Port Service[0000:00:02.0:pcie01]
PM: Adding info for pci_express:0000:00:02.0:pcie01
Allocate Port Service[0000:00:02.0:pcie02]
PM: Adding info for pci_express:0000:00:02.0:pcie02
Allocate Port Service[0000:00:02.0:pcie03]
PM: Adding info for pci_express:0000:00:02.0:pcie03
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PM: Adding info for pci_express:0000:00:03.0:pcie00
Allocate Port Service[0000:00:03.0:pcie01]
PM: Adding info for pci_express:0000:00:03.0:pcie01
Allocate Port Service[0000:00:03.0:pcie02]
PM: Adding info for pci_express:0000:00:03.0:pcie02
Allocate Port Service[0000:00:03.0:pcie03]
PM: Adding info for pci_express:0000:00:03.0:pcie03
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC returns wrong type
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:02.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC returns wrong type
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:03.0:pcie01 failed with error 2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
PM: Adding info for platform:vesafb.0
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
PM: Adding info for No Bus:rtc
Real Time Clock Driver v1.12ac
PM: Adding info for No Bus:hpet
PM: Adding info for No Bus:nvram
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PM: Adding info for platform:serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PM: Adding info for No Bus:ttyS0
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PM: Adding info for No Bus:ttyS1
PM: Adding info for No Bus:ttyS2
PM: Adding info for No Bus:ttyS3
PM: Removing info for No Bus:ttyS0
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PM: Adding info for No Bus:ttyS0
PM: Removing info for No Bus:ttyS1
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PM: Adding info for No Bus:ttyS1
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
PM: Adding info for No Bus:lo
input: Macintosh mouse button emulation as /class/input/input0
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
PM: Adding info for platform:i8042
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
PM: Adding info for serio:serio1
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
Freeing unused kernel memory: 332k freed
Write protecting the kernel read-only data: 1057k
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
SCSI subsystem initialized
libata version 2.20 loaded.
sata_via 0000:00:0f.0: version 2.1
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
sata_via 0000:00:0f.0: routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0x000000000001ff00 ctl 0x000000000001fe02 bmdma 0x000000000001fb00 irq 21
ata2: SATA max UDMA/133 cmd 0x000000000001fd00 ctl 0x000000000001fc02 bmdma 0x000000000001fb08 irq 21
scsi0 : sata_via
PM: Adding info for No Bus:host0
USB Universal Host Controller Interface driver v3.0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ATA: abnormal status 0x7F on port 0x000000000001ff07
ATA: abnormal status 0x7F on port 0x000000000001ff07
ata1.00: ATA-7: WDC WD2500JS-22NCB1, 10.02E02, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi1 : sata_via
PM: Adding info for No Bus:host1
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x000000000001fd07
PM: Adding info for No Bus:target0:0:0
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-22N 10.0 PQ: 0 ANSI: 5
PM: Adding info for scsi:0:0:0:0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
PM: Adding info for No Bus:usbdev1.1_ep81
PM: Adding info for No Bus:usbdev1.1
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: Attached scsi disk sda
PM: Adding info for No Bus:usbdev2.1_ep81
PM: Adding info for No Bus:usbdev2.1
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev3.1_ep81
PM: Adding info for No Bus:usbdev3.1
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600
PM: Adding info for usb:usb4
PM: Adding info for No Bus:usbdev4.1_ep00
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev4.1_ep81
PM: Adding info for No Bus:usbdev4.1
pata_via 0000:00:0f.1: version 0.2.1
ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fa00 irq 14
ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fa08 irq 15
scsi2 : pata_via
PM: Adding info for No Bus:host2
ATA: abnormal status 0x8 on port 0x00000000000101f7
scsi3 : pata_via
PM: Adding info for No Bus:host3
usb 3-1: new low speed USB device using uhci_hcd and address 2
ata4.00: ATAPI, max UDMA/33
PM: Adding info for usb:3-1
PM: Adding info for No Bus:usbdev3.2_ep00
usb 3-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-1:1.0
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.2-1
PM: Adding info for No Bus:usbdev3.2_ep81
PM: Adding info for usb:3-1:1.1
input: Logitech USB Receiver as /class/input/input2
PM: Adding info for No Bus:hiddev0
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.2-1
PM: Adding info for No Bus:usbdev3.2_ep82
PM: Adding info for No Bus:usbdev3.2
ata4.00: configured for UDMA/33
PM: Adding info for No Bus:target3:0:0
scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
PM: Adding info for scsi:3:0:0:0
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb5
PM: Adding info for No Bus:usbdev5.1_ep00
usb usb5: configuration #1 chosen from 1 choice
PM: Adding info for usb:5-0:1.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
PM: Adding info for No Bus:usbdev5.1_ep81
PM: Adding info for No Bus:usbdev5.1
usb 3-1: USB disconnect, address 2
PM: Removing info for No Bus:usbdev3.2_ep81
PM: Removing info for usb:3-1:1.0
PM: Removing info for No Bus:usbdev3.2_ep82
PM: Removing info for No Bus:hiddev0
PM: Removing info for usb:3-1:1.1
PM: Removing info for No Bus:usbdev3.2
PM: Removing info for No Bus:usbdev3.2_ep00
PM: Removing info for usb:3-1
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
loop: loaded (max 128 devices)
PM: Adding info for No Bus:device-mapper
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [e-mail]
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
usb 4-1: new low speed USB device using uhci_hcd and address 2
PM: Adding info for usb:4-1
PM: Adding info for No Bus:usbdev4.2_ep00
usb 4-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-1:1.0
PM: Adding info for No Bus:usbdev4.2_ep81
PM: Adding info for No Bus:usbdev4.2_ep02
PM: Adding info for No Bus:usbdev4.2
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-1: new low speed USB device using uhci_hcd and address 3
PM: Adding info for usb:3-1
PM: Adding info for No Bus:usbdev3.3_ep00
usb 3-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-1:1.0
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.2-1
PM: Adding info for No Bus:usbdev3.3_ep81
PM: Adding info for usb:3-1:1.1
input: Logitech USB Receiver as /class/input/input4
PM: Adding info for No Bus:hiddev0
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.2-1
PM: Adding info for No Bus:usbdev3.3_ep82
PM: Adding info for No Bus:usbdev3.3
audit(1177057312.982:2): enforcing=1 old_enforcing=0 auid=4294967295
security:  3 users, 6 roles, 1760 types, 94 bools, 1 sens, 1024 cats
security:  60 classes, 63835 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=284322
inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=280451
inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=280442
SELinux: initialized (dev loop120, type squashfs), not configured for labeling
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1177057314.136:3): policy loaded auid=4294967295
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PM: Adding info for platform:floppy.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input5
EDAC MC: Ver: 2.0.1 Mar 25 2007
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
PM: Adding info for No Bus:i2c-0
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:05 failed with error -16
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine: Broken BIOS detected, avoid_D3 enabled.
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
PM: Adding info for No Bus:eth0
eth0: VIA Rhine II at 0xdfffe000, 00:00:00:00:00:10, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
audit(1177071733.022:4): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1440" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.023:5): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1680" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.023:6): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1722" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.023:7): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1743" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.023:8): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1760" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.023:9): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1920" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.024:10): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1840" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.024:11): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1600" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.024:12): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u360" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.024:13): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u720" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.024:14): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u820" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.024:15): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u830" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.025:16): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1040" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.025:17): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u1120" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
audit(1177071733.025:18): avc:  denied  { create } for  pid=2422 comm="create_floppy_d" name="fd0u800" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
Linux video capture interface: v2.00
PM: Adding info for No Bus:timer
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 18 (level, low) -> IRQ 18
CORE cx88[0]: subsystem: 107d:665f, board: WinFast DTV1000-T [card=35,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
PM: Adding info for No Bus:seq
PM: Adding info for No Bus:sequencer
PM: Adding info for No Bus:sequencer2
PM: Adding info for No Bus:i2c-1
cx88[0]/0: found at 0000:05:05.0, rev: 5, irq: 18, latency: 64, mmio: 0xde000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:05:05.2[A] -> GSI 18 (level, low) -> IRQ 18
cx88[0]/2: found at 0000:05:05.2, rev: 5, irq: 18, latency: 64, mmio: 0xdd000000
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:01.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
PM: Adding info for No Bus:pcmC0D2c
PM: Adding info for No Bus:pcmC0D1p
PM: Adding info for No Bus:adsp
PM: Adding info for No Bus:pcmC0D0p
PM: Adding info for No Bus:pcmC0D0c
PM: Adding info for No Bus:dsp
PM: Adding info for No Bus:audio
PM: Adding info for No Bus:controlC0
PM: Adding info for No Bus:mixer
lp0: using parport0 (interrupt-driven).
lp0: console ready
No dock devices found.
input: Power Button (FF) as /class/input/input6
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input7
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
audit(1177071768.164:19): audit_pid=2886 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
PM: Adding info for platform:bluetooth
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Removing info for No Bus:vcs3
PM: Removing info for No Bus:vcsa3
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Removing info for No Bus:vcs4
PM: Removing info for No Bus:vcsa4
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Removing info for No Bus:vcs5
PM: Removing info for No Bus:vcsa5
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Removing info for No Bus:vcs6
PM: Removing info for No Bus:vcsa6
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7