uvncrepeater.ini

uvncrepeater.ini (text/plain), 3.71 KB, created by GNUtoo on 2007-04-13 16:33:17 UTC

[general]
;Ports
viewerport = 5900
serverport = 5500

;Repeater's own ip address in case your server happens to have several
;ip addresses (for example, one physical machine running several virtual 
;machines each having their own ip address)
;default (0.0.0.0 = INADDR_ANY = uses all addresses) is the same that 
;older repeater versions (before 0.12) did --> listens to all interfaces
;Notice ! This IS NOT address of server or viewer, but repeater itself !
ownipaddress = 0.0.0.0

;How many sessions can we have active at the same time ?
;values can be [1...1000]
;Notice: If you actually *have* computer(s) capable
;of 1000 simultaneous sessions, you are probably a *very big company*, 
;so please invite me to visit and admire your server(s) ;-)
maxsessions = 100

;If program is started as root (to allow binding ports below 1024), 
;it changes to this user after ports have been bound in startup
;You need to create a suitable (normal, non-privileged) user/group and change name here
runasuser = uvncrep

;Allowed modes for repeater
;0=None, 1=Only Mode 1, 2=Only Mode 2, 3=Both modes
;Notice: If you set allowedmodes = 0, repeater will run without listening to any ports, 
;it will just wait for your ctlr + c ;-)
allowedmodes = 3  

;Logging level
;0 = Very little (fatal() messages, relaying done)
;1 = 0 + Important messages + Connections opened / closed
;2 = 1 + Ini values + exceptions in logic flow
;3 = 2 + Everything else (very detailed and exhaustive logging == BIG log files)
logginglevel = 3              


[mode1]
;0=All
allowedmode1serverport = 0

;0=Allow connections to all server addressess,
;1=Require that server address (or range of addresses) is listed in 
;srvListAllow[0]...srvListAllow[SERVERS_LIST_SIZE-1]
requirelistedserver = 0             

;List of allowed server addresses / ranges
;Ranges can be defined by setting corresponding number to 0, e.g. 10.0.0.0 allows all addresses 10.x.x.x
;Address 255.255.255.255 (default) does not allow any connections
;Address 0.0.0.0 allows all connections
;Only IP addresses can be used here, not DNS names 
;There can be max SERVERS_LIST_SIZE (default 50) srvListAllow lines
srvListAllow0 = 10.0.0.0        ;Allow network 10.x.x.x
srvListAllow1 = 192.168.0.0     ;Allow network 192.168.x.x

;List of denied server addresses / ranges
;Ranges can be defined by setting corresponding number to 0, e.g. 10.0.0.0 denies all addresses 10.x.x.x
;Address 255.255.255.255 (default) does not deny any connections
;Address 0.0.0.0 denies all connections
;Only IP addresses can be used here, not DNS names 
;If addresss/range is both allowed and denied, it will be denied (deny is stronger)
;There can be max SERVERS_LIST_SIZE (default 50) srvListDeny lines
srvListDeny0 = 10.0.0.0         ;Deny network 10.x.x.x
srvListDeny1 = 192.168.2.22     ;Deny host 192.168.2.22

[mode2]
;0=Allow all IDs, 1=Allow only IDs listed in idList[0]...idList[ID_LIST_SIZE-1]
requirelistedid = 0             

;List of allowed ID: numbers
;Value 0 means "this authenticates negatively"
;If value is not listed, default is 0
;Values should be between [1...LONG_MAX-1]
;There can be max ID_LIST_SIZE (default 100) idList lines
idlist0 = 1111                  
idlist1 = 2222
idlist2 = 0
idlist3 = 0
idlist4 = 0
idlist5 = 0
idlist6 = 0
idlist7 = 0
idlist8 = 0
idlist9 = 0


[eventinterface]
;Use event interface (for reporting repeater events to outside world) ?
;This could be used to send email, write webpage, update database etc.
;Possible values: true/false
useeventinterface = true

;Hostname/Ip address  + port of event listener we send events to
eventlistenerhost = localhost
eventlistenerport = 2002

;Make HTTP/1.0 GET request to event listener (instead of normal write dump)
;Somebody wanted this for making a PHP event listener
usehttp = true