output of dmesg

dmesg.initio-panic (text/plain), 19.95 KB, created by Tyler Genter on 2007-04-13 02:24:20 UTC

Linux version 2.6.19-gentoo-r5 (root@argon) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #11 Thu Apr 12 16:47:12 PDT 2007
Command line: root=/dev/hda2
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
 BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
 BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 160) 0 entries of 256 used
Entering add_active_range(0, 256, 393200) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP (v000 VIAK8                                 ) @ 0x00000000000f6720
ACPI: RSDT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff3000
ACPI: FADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff3040
ACPI: MADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff7980
ACPI: DSDT (v001 VIAK8  AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
Entering add_active_range(0, 0, 160) 0 entries of 256 used
Entering add_active_range(0, 256, 393200) 1 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      160
    0:      256 ->   393200
On node 0 totalpages: 393104
  DMA zone: 56 pages used for memmap
  DMA zone: 1157 pages reserved
  DMA zone: 2787 pages, LIFO batch:0
  DMA32 zone: 5319 pages used for memmap
  DMA32 zone: 383785 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Built 1 zonelists.  Total pages: 386572
Kernel command line: root=/dev/hda2
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2199.997 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ e0000000 size 64 MB
Memory: 1542504k/1572800k available (2465k kernel code, 29548k reserved, 1359k data, 212k init)
Calibrating delay using timer specific routine.. 4443.60 BogoMIPS (lpj=8887201)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500007
Detected 12.500 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
pci_get_subsys() called while pci_devices is still empty
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
PCI: MSI-K8T-Neo2Fir, soundcard on
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 64M @ 0xe0000000
PCI-DMA: Disabling IOMMU.
pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved
pnp: 00:02: ioport range 0x5000-0x500f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: e4000000-e5ffffff
  PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 40000
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb (0000:01:00.0): ATI Radeon Ya 
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xffffc2000000e000, 00:0f:ea:3d:77:d7, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.0
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD2000JB-00KFA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: Host Protected Area detected.
	current capacity is 390719855 sectors (200048 MB)
	native  capacity is 390721968 sectors (200049 MB)
hda: Host Protected Area disabled.
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda4 < hda5 >
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xe7001000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-2
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC).
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
ALSA device list:
  #0: VIA 8237 with ALC655 at 0xe800, irq 22
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2
powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6
powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
ACPI: (supports S0 S1 S4 S5)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 212k freed
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
i91u: PCI Base=0xD000, IRQ=19, BIOS=0xFF000, SCSI ID=7
i91u: Reset SCSI Bus ... 
BUG: soft lockup detected on CPU#0!

Call Trace:
 <IRQ>  [<ffffffff8022cc7b>] update_process_times+0x3b/0x60
 [<ffffffff8020cd01>] main_timer_handler+0x1bf/0x34f
 [<ffffffff8020cea3>] timer_interrupt+0x12/0x27
 [<ffffffff80229883>] tasklet_action+0x3d/0x65
 [<ffffffff802426d7>] handle_IRQ_event+0x25/0x53
 [<ffffffff80229ab5>] __do_softirq+0x46/0x90
 [<ffffffff80243467>] handle_edge_irq+0xb2/0xe6
 [<ffffffff8020b393>] do_IRQ+0xe5/0x126
 [<ffffffff80209821>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff88002083>] :initio:tul_reset_scsi+0x46/0x62
 [<ffffffff88004b38>] :initio:i91u_detect+0x777/0x907
 [<ffffffff88008062>] :initio:init_this_scsi_driver+0x62/0xe1
 [<ffffffff8023cbd4>] sys_init_module+0x1290/0x13f8
 [<ffffffff802092fe>] system_call+0x7e/0x83

scsi 0:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
sd 0:0:0:1: Attached scsi removable disk sdb
sd 0:0:0:1: Attached scsi generic sg1 type 0
scsi 0:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi1 : Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a
Unable to handle kernel NULL pointer dereference at 0000000000000258 RIP: 
 [<ffffffff8020f19b>] check_addr+0x9/0x46
PGD 5de57067 PUD 5f562067 PMD 0 
Oops: 0000 [1] 
CPU 0 
Modules linked in: initio
Pid: 2087, comm: modprobe Not tainted 2.6.19-gentoo-r5 #11
RIP: 0010:[<ffffffff8020f19b>]  [<ffffffff8020f19b>] check_addr+0x9/0x46
RSP: 0018:ffff81005eb8fa28  EFLAGS: 00010002
RAX: 00007f0000000000 RBX: 000000005ff2e140 RCX: 000000000000000e
RDX: 000000005ff2e140 RSI: 0000000000000070 RDI: ffffffff80499115
RBP: ffff81000000c000 R08: 000000000000055e R09: ffff81005ff2e140
R10: ffff81005e495800 R11: 0000000000000286 R12: ffff81005e495800
R13: ffffffff88006420 R14: ffff81005ff2e080 R15: ffff81005f2b30e8
FS:  00002add91c72ae0(0000) GS:ffffffff805bd000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000258 CR3: 000000005ddcd000 CR4: 00000000000006e0
Process modprobe (pid: 2087, threadinfo ffff81005eb8e000, task ffff81005ed711c0)
Stack:  ffff81005f2b30e8 ffffffff8020f2d1 ffff81005ff2e080 ffffffff88004092
 0000000000000297 ffff81005ff2e080 ffff81005e495800 ffff81005fb1b298
 ffff81005ff2e080 ffffffff8037af16 ffff81005f2b3000 ffff81005e495800
Call Trace:
 [<ffffffff8020f2d1>] nommu_map_single+0x3a/0x49
 [<ffffffff88004092>] :initio:i91u_queuecommand+0xb8/0x276
 [<ffffffff8037af16>] scsi_dispatch_cmd+0x1c2/0x207
 [<ffffffff8037f38d>] scsi_request_fn+0x244/0x2c7
 [<ffffffff802dc6c3>] blk_execute_rq_nowait+0x6e/0x74
 [<ffffffff802dc751>] blk_execute_rq+0x88/0xb0
 [<ffffffff8027d9c0>] bio_alloc_bioset+0x89/0xd9
 [<ffffffff802dacce>] blk_rq_bio_prep+0x31/0xbd
 [<ffffffff8037efd3>] scsi_execute+0xe8/0x105
 [<ffffffff8037f0a9>] scsi_execute_req+0xb9/0xde
 [<ffffffff8038003f>] scsi_probe_and_add_lun+0x1b2/0x868
 [<ffffffff80353a70>] device_add+0x51e/0x530
 [<ffffffff802e4007>] kobject_get+0x12/0x17
 [<ffffffff80352f95>] get_device+0x17/0x1f
 [<ffffffff80380bfc>] __scsi_scan_target+0xb5/0x511
 [<ffffffff80295537>] sysfs_new_dirent+0x34/0x75
 [<ffffffff80295811>] sysfs_make_dirent+0x1b/0x84
 [<ffffffff8038109d>] scsi_scan_channel+0x45/0x70
 [<ffffffff80381140>] scsi_scan_host_selected+0x78/0xb2
 [<ffffffff88008093>] :initio:init_this_scsi_driver+0x93/0xe1
 [<ffffffff8023cbd4>] sys_init_module+0x1290/0x13f8
 [<ffffffff802092fe>] system_call+0x7e/0x83


Code: 48 8b 86 e8 01 00 00 4c 8b 00 48 8d 04 0a 4c 39 c0 76 21 b8 
RIP  [<ffffffff8020f19b>] check_addr+0x9/0x46
 RSP <ffff81005eb8fa28>
CR2: 0000000000000258
 <5>sd 0:0:0:2: Attached scsi removable disk sdc
sd 0:0:0:2: Attached scsi generic sg2 type 0
scsi 0:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 0:0:0:3: Attached scsi removable disk sdd
sd 0:0:0:3: Attached scsi generic sg3 type 0
usb-storage: device scan complete
hdd: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
EXT3 FS on hda2, internal journal
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized radeon 1.25.0 20060524 on minor 0
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004020k swap on /dev/hda1.  Priority:-1 extents:1 across:1004020k
NMI Watchdog detected LOCKUP on CPU 0
CPU 0 
Modules linked in: radeon drm via_agp ide_cd initio
Pid: 2404, comm: scsi_eh_1 Not tainted 2.6.19-gentoo-r5 #11
RIP: 0010:[<ffffffff8800208a>]  [<ffffffff8800208a>] :initio:tul_reset_scsi+0x4d/0x62
RSP: 0018:ffff81005dd03e60  EFLAGS: 00000046
RAX: 00000000fffef6be RBX: ffff81005ff2e080 RCX: 00000000ff00d000
RDX: 00000000fffef6be RSI: 0000000000000000 RDI: ffffffff88006420
RBP: ffff81005ff2e080 R08: ffff81005dd03ed0 R09: 0000000000000800
R10: 0000000000000001 R11: ffffffff802dd044 R12: 0000000000002003
R13: ffff81005e495800 R14: ffffffff804c436f R15: 0000000000000000
FS:  00002b024524ee30(0000) GS:ffffffff805bd000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002b02450bf160 CR3: 000000005e419000 CR4: 00000000000006e0
Process scsi_eh_1 (pid: 2404, threadinfo ffff81005dd02000, task ffff81005e1f75e0)
Stack:  ffffffff8800248c ffffffff8037cecf ffff81005ff2e080 0000000000000000
 0000000000000000 ffffffff8037da92 0000000000000001 ffff81005e1f75e0
 ffff81005ff9ae40 0000000000000b8a ffff81005e1f77b8 ffff81005ed711c0
Call Trace:
 [<ffffffff8800248c>] :initio:i91u_bus_reset+0x15/0x1c
 [<ffffffff8037cecf>] scsi_try_bus_reset+0x25/0x6c
 [<ffffffff8037da92>] scsi_error_handler+0x3a6/0x65c
 [<ffffffff8037d6ec>] scsi_error_handler+0x0/0x65c
 [<ffffffff80234943>] kthread+0xca/0xfb
 [<ffffffff80209c58>] child_rip+0xa/0x12
 [<ffffffff802346ee>] keventd_create_kthread+0x0/0x4a
 [<ffffffff80234879>] kthread+0x0/0xfb
 [<ffffffff80209c4e>] child_rip+0x0/0x12


Code: 48 39 c2 79 f4 8d 91 84 00 00 00 0f b7 d2 ec b8 02 00 00 00 
 <6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs