Linux version 2.6.19-gentoo-r5 (root@argon) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #11 Thu Apr 12 16:47:12 PDT 2007 Command line: root=/dev/hda2 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 160) 0 entries of 256 used Entering add_active_range(0, 256, 393200) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP (v000 VIAK8 ) @ 0x00000000000f6720 ACPI: RSDT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff3000 ACPI: FADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff3040 ACPI: MADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff7980 ACPI: DSDT (v001 VIAK8 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000 Entering add_active_range(0, 0, 160) 0 entries of 256 used Entering add_active_range(0, 256, 393200) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 160 0: 256 -> 393200 On node 0 totalpages: 393104 DMA zone: 56 pages used for memmap DMA zone: 1157 pages reserved DMA zone: 2787 pages, LIFO batch:0 DMA32 zone: 5319 pages used for memmap DMA32 zone: 383785 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) Built 1 zonelists. Total pages: 386572 Kernel command line: root=/dev/hda2 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2199.997 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ e0000000 size 64 MB Memory: 1542504k/1572800k available (2465k kernel code, 29548k reserved, 1359k data, 212k init) Calibrating delay using timer specific routine.. 4443.60 BogoMIPS (lpj=8887201) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12500007 Detected 12.500 MHz APIC timer. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 pci_get_subsys() called while pci_devices is still empty ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON PCI: MSI-K8T-Neo2Fir, soundcard on Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *6 7 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:00.0 agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xe0000000 PCI-DMA: Disabling IOMMU. pnp: 00:02: ioport range 0x4000-0x407f could not be reserved pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: e4000000-e5ffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz radeonfb: PLL min 20000 max 40000 i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type no found radeonfb (0000:01:00.0): ATI Radeon Ya ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 eth0: RealTek RTL8139 at 0xffffc2000000e000, 00:0f:ea:3d:77:d7, IRQ 18 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.0 ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: WDC WD2000JB-00KFA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: Host Protected Area detected. current capacity is 390719855 sectors (200048 MB) native capacity is 390721968 sectors (200049 MB) hda: Host Protected Area disabled. hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda4 < hda5 > ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xe7001000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 3 usb 1-3: configuration #1 chosen from 1 choice usb 2-2: new low speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning input: Logitech USB Receiver as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-2 input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5 drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0 usbcore: registered new interface driver visor drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC). ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.5 to 64 ALSA device list: #0: VIA 8237 with ALC655 at 0xe800, irq 22 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 212k freed ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 i91u: PCI Base=0xD000, IRQ=19, BIOS=0xFF000, SCSI ID=7 i91u: Reset SCSI Bus ... BUG: soft lockup detected on CPU#0! Call Trace: [] update_process_times+0x3b/0x60 [] main_timer_handler+0x1bf/0x34f [] timer_interrupt+0x12/0x27 [] tasklet_action+0x3d/0x65 [] handle_IRQ_event+0x25/0x53 [] __do_softirq+0x46/0x90 [] handle_edge_irq+0xb2/0xe6 [] do_IRQ+0xe5/0x126 [] ret_from_intr+0x0/0xa [] :initio:tul_reset_scsi+0x46/0x62 [] :initio:i91u_detect+0x777/0x907 [] :initio:init_this_scsi_driver+0x62/0xe1 [] sys_init_module+0x1290/0x13f8 [] system_call+0x7e/0x83 scsi 0:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 0:0:0:1: Attached scsi removable disk sdb sd 0:0:0:1: Attached scsi generic sg1 type 0 scsi 0:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 scsi1 : Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a Unable to handle kernel NULL pointer dereference at 0000000000000258 RIP: [] check_addr+0x9/0x46 PGD 5de57067 PUD 5f562067 PMD 0 Oops: 0000 [1] CPU 0 Modules linked in: initio Pid: 2087, comm: modprobe Not tainted 2.6.19-gentoo-r5 #11 RIP: 0010:[] [] check_addr+0x9/0x46 RSP: 0018:ffff81005eb8fa28 EFLAGS: 00010002 RAX: 00007f0000000000 RBX: 000000005ff2e140 RCX: 000000000000000e RDX: 000000005ff2e140 RSI: 0000000000000070 RDI: ffffffff80499115 RBP: ffff81000000c000 R08: 000000000000055e R09: ffff81005ff2e140 R10: ffff81005e495800 R11: 0000000000000286 R12: ffff81005e495800 R13: ffffffff88006420 R14: ffff81005ff2e080 R15: ffff81005f2b30e8 FS: 00002add91c72ae0(0000) GS:ffffffff805bd000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000258 CR3: 000000005ddcd000 CR4: 00000000000006e0 Process modprobe (pid: 2087, threadinfo ffff81005eb8e000, task ffff81005ed711c0) Stack: ffff81005f2b30e8 ffffffff8020f2d1 ffff81005ff2e080 ffffffff88004092 0000000000000297 ffff81005ff2e080 ffff81005e495800 ffff81005fb1b298 ffff81005ff2e080 ffffffff8037af16 ffff81005f2b3000 ffff81005e495800 Call Trace: [] nommu_map_single+0x3a/0x49 [] :initio:i91u_queuecommand+0xb8/0x276 [] scsi_dispatch_cmd+0x1c2/0x207 [] scsi_request_fn+0x244/0x2c7 [] blk_execute_rq_nowait+0x6e/0x74 [] blk_execute_rq+0x88/0xb0 [] bio_alloc_bioset+0x89/0xd9 [] blk_rq_bio_prep+0x31/0xbd [] scsi_execute+0xe8/0x105 [] scsi_execute_req+0xb9/0xde [] scsi_probe_and_add_lun+0x1b2/0x868 [] device_add+0x51e/0x530 [] kobject_get+0x12/0x17 [] get_device+0x17/0x1f [] __scsi_scan_target+0xb5/0x511 [] sysfs_new_dirent+0x34/0x75 [] sysfs_make_dirent+0x1b/0x84 [] scsi_scan_channel+0x45/0x70 [] scsi_scan_host_selected+0x78/0xb2 [] :initio:init_this_scsi_driver+0x93/0xe1 [] sys_init_module+0x1290/0x13f8 [] system_call+0x7e/0x83 Code: 48 8b 86 e8 01 00 00 4c 8b 00 48 8d 04 0a 4c 39 c0 76 21 b8 RIP [] check_addr+0x9/0x46 RSP CR2: 0000000000000258 <5>sd 0:0:0:2: Attached scsi removable disk sdc sd 0:0:0:2: Attached scsi generic sg2 type 0 scsi 0:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 0:0:0:3: Attached scsi removable disk sdd sd 0:0:0:3: Attached scsi generic sg3 type 0 usb-storage: device scan complete hdd: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 EXT3 FS on hda2, internal journal [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1004020k swap on /dev/hda1. Priority:-1 extents:1 across:1004020k NMI Watchdog detected LOCKUP on CPU 0 CPU 0 Modules linked in: radeon drm via_agp ide_cd initio Pid: 2404, comm: scsi_eh_1 Not tainted 2.6.19-gentoo-r5 #11 RIP: 0010:[] [] :initio:tul_reset_scsi+0x4d/0x62 RSP: 0018:ffff81005dd03e60 EFLAGS: 00000046 RAX: 00000000fffef6be RBX: ffff81005ff2e080 RCX: 00000000ff00d000 RDX: 00000000fffef6be RSI: 0000000000000000 RDI: ffffffff88006420 RBP: ffff81005ff2e080 R08: ffff81005dd03ed0 R09: 0000000000000800 R10: 0000000000000001 R11: ffffffff802dd044 R12: 0000000000002003 R13: ffff81005e495800 R14: ffffffff804c436f R15: 0000000000000000 FS: 00002b024524ee30(0000) GS:ffffffff805bd000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00002b02450bf160 CR3: 000000005e419000 CR4: 00000000000006e0 Process scsi_eh_1 (pid: 2404, threadinfo ffff81005dd02000, task ffff81005e1f75e0) Stack: ffffffff8800248c ffffffff8037cecf ffff81005ff2e080 0000000000000000 0000000000000000 ffffffff8037da92 0000000000000001 ffff81005e1f75e0 ffff81005ff9ae40 0000000000000b8a ffff81005e1f77b8 ffff81005ed711c0 Call Trace: [] :initio:i91u_bus_reset+0x15/0x1c [] scsi_try_bus_reset+0x25/0x6c [] scsi_error_handler+0x3a6/0x65c [] scsi_error_handler+0x0/0x65c [] kthread+0xca/0xfb [] child_rip+0xa/0x12 [] keventd_create_kthread+0x0/0x4a [] kthread+0x0/0xfb [] child_rip+0x0/0x12 Code: 48 39 c2 79 f4 8d 91 84 00 00 00 0f b7 d2 ec b8 02 00 00 00 <6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: no IPv6 routers present agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs